Français dropdown-ico

Manuel d’utilisation NEC NP-UM330X-WK1

64 pages Non applicable
Télécharger

Aller à la page of 64

Summary
  • NEC NP-UM330X-WK1 - page 1

    ============== ================= ================ ================= ====== Control Commands for NE C Projector (Basic) Rev 06.4.12a Copyright (C) NEC Display Solutions, Ltd. 2002-2012 ---------- -------- ---------- ---------- ---------- ---------- ---------- -- Updated on June 4, 2012 ---------- -------- ---------- ---------- ---------- ---------- ...

  • NEC NP-UM330X-WK1 - page 2

    ============== ================= ================ ================= ====== Contents 1. Projector Control 2. Connection Method 3. Interface Conditions 4. List of Commands 5. Command Descriptions 6. Table of Response Error Codes ============== ================= ================ ================= ====== 1. Projector Control ---------- -------- ------- ...

  • NEC NP-UM330X-WK1 - page 3

    (1) (2) (3-1) (3-2) (3-3) (3-4) GT5000/GT6000 Yes Yes Yes Yes Y es No GT1150/GT2150 Yes No Yes Yes Y es No HT410/HT510 Yes No No No No No HT1000/HT1100 Yes No No No No No LT180 Yes N o No No No No LT25/LT30/LT35 Yes No No No No No LT220/LT240/LT260 Yes No Yes Yes No No LT240K/LT260K Yes Yes Yes Yes No No LT245/LT265/LT280/LT380 Yes No No Yes Yes No ...

  • NEC NP-UM330X-WK1 - page 4

    * The serial cable, LAN card and LAN cable are sep arately sold. * The WT610 replaced the WT6 10 and uses the same command se t. (CAUTION) Before making connections, be su re to invalidate the standby mode of the projector and set t he "idle mode". The projector cannot use the control commands in the standby mode. Setting method: Under pr ...

  • NEC NP-UM330X-WK1 - page 5

    ( CAUTION ) Before making connections, set the standby mod e of the projector to "NORMAL" or "Idol mode". The projector cannot use the control commands in t he po wer-saving condition, but the following mo del can use some control command s. Baud rate: 38400 bps (NP600 series, NP610 Series, VT60/VT70/VT80/VT90 seri es, VT700: 19 ...

  • NEC NP-UM330X-WK1 - page 6

    | |< --------------| | +------- -------+ Re sponse +--- ---------- -+ (ACK or NAK) 4-1. Frame Format **************************************** ****************************** One frame comprise s a header, a data portion, and a che cksum. Frame Format: +--------- ------- ---------- -----+--- ---------- ---------+ --------+ | Header portion | Data ...

  • NEC NP-UM330X-WK1 - page 7

    Entering 00H or FFH becomes a comm on command for all the projectors. (broadcast notification) This is convenient for controlling multiple projectors at the same time. * When the controller is conne cted with the projector on a one-to-o ne basis Broadcast notification is reco mmended. * When the controller is conne cted with multiple projectors To ...

  • NEC NP-UM330X-WK1 - page 8

    Command : This sets data length of data added to a comm and to send it. ( See each command description.) Response : This sets data length of data added to a response to send it. ( See each command description.) CAUTION : Data length is specified using total of 12 bits ( 0 - 4095) of 4 bits of the 4th byte and 8 bits of the 5th byte.* The upper rank ...

  • NEC NP-UM330X-WK1 - page 9

    03H : Gain-related error 04H : Logo transfer error DATA02 Error description * When not supported 00H : Unknown command 01H : The current model does not support this function. 02H : This model is not c ompatible with the Switcher. 03H : This model is not compatible with the PC Viewer. * When a parameter error occurs 00H : Unvalid values s pecified. ...

  • NEC NP-UM330X-WK1 - page 10

    LAN connection ---------- -------- ---------- ---------- ---------- ---------- ---------- -- [ Wired LAN port ] LAN inter face Communication speed: Auto setting (10/100Mbp s) Certified standard: IEEE802.3 (10BASE-T) IEEE802.3u (100BASE-TX, Auto-Negotiation) A LAN conn ector (8 male RJ- 45 connecto r) 1 TD+ Transmit data (+) 2 TD- Transmit data (-) ...

  • NEC NP-UM330X-WK1 - page 11

    039. LAMP MODE SET 03H B1H 00H 00H 02H 07H 00H BDH 046. WXGA MODE SETTING REQUEST 03H B0H 00H 00H 01H DATA1 CKS 049. WXGA MODE SETTING SET 03H B1H 00H 00H 02H DATA1 DATA2 CKS 050. REMOTE KEY CODE 02H 0FH 00H 00H 02H 00 H 00H 13H 053. LENS CONTROL 02H 18H 00H 00H 02H <DATA> CKS 053-1. LENS CONTROL REQUEST 02H 1CH 00H 00H 02H <DATA> CKS 0 ...

  • NEC NP-UM330X-WK1 - page 12

    29: NP4100/NP4100W (NP4100 Seri es) 30: NP1250/NP2250/NP3250/ NP3250 W (NP3250 Series) 31: NP310/NP410W/NP510/NP5 10W/NP 510WS/NP610/NP610S (NP610 Series) 32: NP1200/NP2200 (NP2200 Series) 33: NP110/NP115/NP215/NP216 (NP216 Series) 34: NP43/NP64 (NP64 Series) 35: M260X/M260W/M300X/M300W (M300 Series) 36: P350X/P350X/P420X (P420 Series) 37: U300X/U3 ...

  • NEC NP-UM330X-WK1 - page 13

    Meaning of Symbols --------------- --------------- ---------------- ------------------- --- * Supported ! Is available depending on model's version - Not Supported Comm and Nam e 25 26 27 29 30 31 32 33 34 35 36 37 38 39 40 41 006. RUNNING SENSE **************** 007. COMMON DAT A REQUEST **************** 009. ERROR ST ATUS REQU EST *********** ...

  • NEC NP-UM330X-WK1 - page 14

    Comm and Name 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 28 006. RUNNING SENSE * * * * * * * * * * * - * * - - - * * - - - * * * 0 0 7 . C O M M O N D A T A R E Q U E S T *********** - ** - - - ** - - -* * * 0 0 9 . E R R O R S T A T U S R E Q U E S T *********** ***- - - ***** * * * 0 1 5 . P O W E R O N *********** *********** ...

  • NEC NP-UM330X-WK1 - page 15

    This will differ depending on the projector. In case of MT/NP1000 series 10H In case of MT/NP3150 series 10H In case of MT/NP3250 series 10H In case of PA600 series 10H In case of PX750 series 10H In case of PH1000 series 10H In case of LT/LT80 series 20H In case of NP61, NP62 series 20H In case of NP216 series 20H In case of V300 series 20H In cas ...

  • NEC NP-UM330X-WK1 - page 16

    Command: 00H 81H 00H 00H 00H 81H Response: At the time of a success 20H 81H 01H xxH 01H DATA01 CKS (*1) (*2) (*3) Data Portion Contents ------------ ------------- -------------- ---------------- ------------ DATA01 Status of operation Bi t 7: Power On/Off processing 0 = No execution (Normal condition) 1 = During execution Bi t 6: Selecting signal p ...

  • NEC NP-UM330X-WK1 - page 17

    DATA02 Projector ID DATA02 1 .. 64 NP4000 1 .. 254 NP62/NP64 1 .. 254 NP216 DATA03 Reserved DATA04 Projector status 00 H: Idling 01 H: Power On DATA05 Cooling processing 00 H: No execution (Normal condition) 01 H: During execution DATA06 Indication signal number (Entry list number - 1) 0 .. 199 DATA07 Type 1 of input terminal to be selected (!) 01 ...

  • NEC NP-UM330X-WK1 - page 18

    DATA29 Picture mute 00 H : OFF 01 H : ON DATA30 Sound mute 00 H : OFF 01 H : ON DATA31 .. Reserved DATA32 Freeze Status (!2) 00H : OFF 01 H : ON FFH : Not Supported DATA33 Test pattern display 1 00 H : No display (Normal condition) 00 H Other : Displaying (Pattern ID) P at t er n ID P a tt er n Na m e M T L T LT 18 0 L T 80 H T GT W T VT NP1 000 NP ...

  • NEC NP-UM330X-WK1 - page 19

    DATA66 Forced On-screen mute 00 H : OFF 01 H : ON DATA67 On-screen display 00 H : No display 01 H : Displaying DATA68 Selecting signal processing 00 H : No execution (Normal condition) 01 H : During execution DATA69 Status of operation 00 H : Idling 04 H : Power On 05 H : Cooling 06 H : Idling (Error occurrence) Other than above: (nondisclosure) In ...

  • NEC NP-UM330X-WK1 - page 20

    Data01 Data70 Data71 01H 00H 0 3H MT1060/MT1065 01H 01H 03H MT 860 01H 02H 03H MT 1075 01H 00H 06H NP1000/NP2000 02H 00H 03H LT 240/LT260 02H 01H 03H LT 220 02H 02H 03H LT 240K/LT260K 02H 00H 05H LT 245/LT265 02H 00H 06H LT 380 02H 01H 06H LT 280 03H 00H 04H VT 770 03H 00H 06H VT80 Series 03H 00H 07H VT90 Series 04H 00H 01H G T1150 04H 01H 01H G T2 ...

  • NEC NP-UM330X-WK1 - page 21

    DATA72 PC Card insertion 00 H : Not inserted 01 H : Inserted DATA73 USB Mouse connection 00 H : Not connected 01 H : Connected DATA74 Entry list type 01 H : Default 02 H : User DATA75 .. 82 Reserved DATA83 On-screen mute 00 H : OFF 01 H : ON DATA84 Reserved DATA85 Indicate Contents 00 H = Picture signal displaying 01 H = No signal 02 H = Viewer dis ...

  • NEC NP-UM330X-WK1 - page 22

    009. ERROR STATUS REQUEST **************************************** ****************************** Function: This command acquire s the error information occurri ng with the projector. Command: 00H 88H 00H 00H 00H 88H Response: At the time of a success 20H 88H 01H xxH 0CH DATA01 .. DATA12 CKS (*1) (*2) (*3) Data Portion Contents ------------ ------- ...

  • NEC NP-UM330X-WK1 - page 23

    Supplement: (!) LT/LT80/HT: "None" 015. POWER ON **************************************** ****************************** Function: This command swit ches on the main power of the projector. Command: 02H 00H 00H 00H 00H 02H Response: At the time of a success 22H 00H 01H xxH 00H CKS (*1) (*2) (*3) Response: At the time of a failure A2H 00H ...

  • NEC NP-UM330X-WK1 - page 24

    DATA02 Switching number --------------------------------------- ------------------ When the switching object is the "S ignal list", the signal list number is specified. (0…99) --------------------------------------- ------------------ When the switching object is the "I nput connector", the input connector number is sp ecified ...

  • NEC NP-UM330X-WK1 - page 25

    M T LT LT18 0 L T80 HT G T W T V T N P 100 0/ 315 0 H T 10 LT 30 N P 40 01 H R GB 1(R G B ) * * * * * * * * * * * * 02 H R GB 2 (! 1) * * - * - * - * * - - - 02 H D VI(A N AL OG ) (! 2) - - - - - - * - - - - - 06 H V i deo * * * * * * * * * * * * 0B H S-V i deo * * * * * * * * * * * * 10 H C om po nen t - - * * * - - - * - - - ( ! ! ) 11 H C om po ...

  • NEC NP-UM330X-WK1 - page 26

    This command blanks the picture. Command: 02H 10H 00H 00H 00H 12H Response: At the time of a success 22H 10H 01H xxH 00H CKS (*1) (*2) (*3) Response: At the time of a failure A2H 10H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) Supplement: * Picture mute is cancelled for the following: Input connector switching Video signal switching 021. PICT ...

  • NEC NP-UM330X-WK1 - page 27

    This command c ancels the so und muting. Command: 02H 13H 00H 00H 00H 15H Response: At the time of a success 22H 13H 01H xxH 00H CKS (*1) (*2) (*3) Response: At the time of a failure A2H 13H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) 024. ONSCREEN MUTE ON **************************************** ****************************** Function: This ...

  • NEC NP-UM330X-WK1 - page 28

    *volume increment/decrement *direct setting of brightness *brightnes s incremen t/decrement *direct setting of color *color increment/decrem ent *direct setting of contrast *contrast increment/decrement *direct setting of sharpness *sharpness incre ment/decrement *direct setting of tint *tint increment/decrement brightness contrast color tint<hu ...

  • NEC NP-UM330X-WK1 - page 29

    DATA03 : 01H (increment/decrement) DATA04 : FFH (lower data : -1 = FFFF<Hex>) DATA05 : FFH (upper data : -1 = FFFF<Hex>) 030-2. VOLUME ADJUST **************************************** ****************************** Function: This command sets the volume. Command: 03H 10H 00H 00H 05H DATA01 .. DATA05 CKS (*3) Data Portion Contents ------- ...

  • NEC NP-UM330X-WK1 - page 30

    DAT A01 DAT A02 A djustm ent it em s 18H 00H A spect Rati o Input (! ) DATA03 Adjustment mode 00 H : Absolute value specification 01 H : Relative value specification DATA04 Adjustment value (Lower ranking 8 bits) DATA05 Adjustment value (Upper ranking 8 bits) Response: At the time of a success 23H 10H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*3) Da ...

  • NEC NP-UM330X-WK1 - page 31

    037. INFORMATION REQUEST **************************************** ****************************** Function: This command acquires th e projector information. Command: 03H 8AH 00H 00H 00H 8DH Response: At the time of a success 23H 8AH 01H xxH 62H DATA01 .. DATA98 CKS (*1) (*2) (*3) Data Portion Contents ------------ ------------- -------------- ----- ...

  • NEC NP-UM330X-WK1 - page 32

    (*1) (*2) (*3) Data Portion Contents ----------- -------- ---------- ---------- ---------- ---------- -------- DATA01 .. 04 : Lamp Hour Meter(Normal mode) (second) DATA05 .. 08 : Reserved DATA09 .. 12 : Lamp Use Warning Starting Time(Normal mode) (second) DATA13 .. 16 : Lamp Use Prohibited Time(Normal mode) (second) Response: At the time of a failu ...

  • NEC NP-UM330X-WK1 - page 33

    (*1) (*2) (*4) (*3) 037-4. LAMP INFORMATION REQUES T 3 **************************************** ****************************** Function: This command acquires th e information on the projector lamp in Eco mode. Command: 03H 96H 00H 00H 02H DATA01 DATA02 CKS (*3) Data Portion Contents ------------ ------------- -------------- ---------------- ------ ...

  • NEC NP-UM330X-WK1 - page 34

    Calculator Procedure 1) Set calculator to HEX 2) Punch in DATA06 DATA05 DATA04 DATA03 (00004650) 3) Change from HEX to Decimal - value will chang e to 18000 seconds Lamp's use of hours = 18000/3600 = 5 hours * In case of acquiring the remaining time until lamp warnin g message starts to appear (in terms of sp ecified values) 03H 96H 00H 00H 02 ...

  • NEC NP-UM330X-WK1 - page 35

    DATA02 DATA03 DATA04 DATA05 : Kilogram 9CH 09H 00H 00H : 2460 [kg] DATA06 DATA07 DATA08 DATA09 : Milligram 06H F9H 00H 00H : 63750 [mg] Total Carbon Savings = (2460 * 1000) + (63750 / 1000) = 2460063.75 [g] = 2460 + (63750 / 1000 / 1000) = 2460.0637 5 [kg] 037-7. LAMP INFORMATION REQUES T 4 **************************************** ***************** ...

  • NEC NP-UM330X-WK1 - page 36

    A3H 9BH 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) Supplement: * In case of acquiring lamp's use of hours 03H 9BH 00H 00H 03H 00H 00H 01H CKS Example of acquisition DATA04 DATA05 DATA06 DATA07 : lamp's use of hours 50H 46H 00H 00H : 18000 seconds Lamp Usage = 18000 / 3600 = 5 hour (!1) X = 100 - ((Lamp Use Prohibited Time * 100) / ...

  • NEC NP-UM330X-WK1 - page 37

    Data Portion Contents ------------ ------------- -------------- ---------------- ---------- DATA01 07H fixed DATA02 Setting Value 00H : Normal 01H : Eco Response: At the time of a success 23H B1H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*3) Data Portion Contents ------------ ------------- -------------- ---------------- ---------- DATA01 07H fixed ...

  • NEC NP-UM330X-WK1 - page 38

    ------------ ------------- -------------- ---------------- ---------- DATA01 C3H fixed DATA02 Setting Value 00H : OFF 01H : ON Response: At the time of a success 23H B1H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*3) Data Portion Contents ------------ ------------- -------------- ---------------- ---------- DATA01 C3H fixed DATA02 Results 00H : Norma ...

  • NEC NP-UM330X-WK1 - page 39

    050. REMOTE KEY CODE **************************************** ****************************** Function: This command sends remo te control key codes of projector. Command: 02H 0FH 00H 00H 02H DATA01 DATA02 CKS (*3) Data Portion Contents ------------ ------------- -------------- ---------------- ------------ DATA01 .. 02 : Remote control key code (Wo ...

  • NEC NP-UM330X-WK1 - page 40

    57 39H 00H INFO. 58 3AH 00H PIXEL 59 3BH 00H KEYSTONE 60 3CH 00H AM PLITUDE 61 3DH 00H INPUT LIST 71 47H 00H PICMUTE ON (!!) 72 48H 00H PICMUTE OFF (!!) 73 49H 00H SNDMUTE ON (!!) 74 4AH 00H SNDMUTE OFF (!!) 75 4BH 00H RGB1(*5) (!!) 76 4CH 00H RGB2(*5) 77 4DH 00H RGB3 78 4EH 00H YCBCR 79 4FH 00H VIDEO1 (!!) 80 50H 00H VIDEO2 81 51H 00H S-VIDEO1 (!! ...

  • NEC NP-UM330X-WK1 - page 41

    DATA01 Results 00 H : Normal FF H : Error Response: At the time of a failure A2H 0FH 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) (!) About AUTO key The MT series model with the built-in image sensor does not supp ort the AUTO key. Use the AUTO (SHORT) key. (!!) HT10 series, LT180, L T30 series, NP40 series and NP400 0 series (!!!) VT60 series ...

  • NEC NP-UM330X-WK1 - page 42

    Command: 02H 18H 00H 00H 02H DATA01 DATA02 CKS (*3) Data Portion Contents ------------ ------------- -------------- ---------------- ------------ DATA01 Target 00 H : Zoom 01 H : Focus DATA02 Contents 00 H : Stops 01 H : Drives for 1 second in the direction of plus 02 H : Drives for 0.5 second in the direction of plus 03 H : Drives for 0.25 second ...

  • NEC NP-UM330X-WK1 - page 43

    (*1) (*2) (*3) Data Portion Contents ------------ ------------- -------------- ---------------- ------------ DATA01 same values as DATA01 of the comman d DATA02 same values as DATA02 of the comman d DATA03 Maximum adjustable range (Lower ranki ng 8 bits) DATA04 Maximum adjustable range (Upp er ranking 8 bits) DATA05 Minimum adjustable range (Lower ...

  • NEC NP-UM330X-WK1 - page 44

    053-3. LENS MEMORY CUSTOM SET **************************************** ****************************** Function: This command executes the "Use Custom Point" or "Set Custom Point". Command: 02H 1EH 00H 00H 01H DATA01 CKS (*3) Data Portion Contents ------------ ------------- -------------- ---------------- ------------ DATA01 Targ ...

  • NEC NP-UM330X-WK1 - page 45

    Response: At the time of a failure A2H 1FH 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) 053-5. LENS MEMORY CONTROL RE QUEST **************************************** ****************************** Function: This command a cquires the info rmat ion on the lens memory function. Command: 02H 20H 00H 00H 01H DATA01 CKS (*3) Data Portion Contents -- ...

  • NEC NP-UM330X-WK1 - page 46

    DATA01 same values as DATA01 of the command DATA02 Results 00 H : Normal 01 H : Error Response: At the time of a failure A2H 21H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) 060. GAIN PARAMETER REQUEST 2 **************************************** ****************************** Function: This command acquires th e adjustment values. Command: 03H ...

  • NEC NP-UM330X-WK1 - page 47

    (! ) Acquirem ent item s DATA01 DATA02 Acqui rement name 00H 00H P icture / Brightness 01H 00H Picture / Contrast 02H 00H Pict ure / Color 03H 00H Pict ure / Hue 04H 00H P icture / Sharpness 05H 00H V ol ume 05H 01H S ound / Bass 05H 02H Sound / Treble 06H 00H B l anki ng / T op 06H 01H B l anki ng / B ott om 06H 02H B l anki ng / L ef t 06H 03H B ...

  • NEC NP-UM330X-WK1 - page 48

    4CH 07H Color Correction / Yell ow 4CH 08H Color Correction / Magenta 4CH 09H Color Correction / Cyan 4CH 0AH Co lor Corre ction / W hite 4DH 00H Through 4EH 00H Ref . Auto W hi te / Col or Tem p R 4EH 01H Ref . Auto W hi te / Col or Tem p G 4EH 02H Ref . Auto W hi te / Col or Tem p B 4FH 00H Posit ion 50H 00H Screen Positi on 51H 00H Sweet Vision ...

  • NEC NP-UM330X-WK1 - page 49

    077. MUTE CONTROL **************************************** ****************************** Function: This command controls the mute of picture, sound and on-screen. Command: 02H 1AH 00H 00H 02H DATA01 DATA02 CKS (*3) Data Portion Contents ------------ ------------- -------------- ---------------- ------------ DATA01 Setting items 00 H : Picture 01 H ...

  • NEC NP-UM330X-WK1 - page 50

    DATA01 DAT A02 DAT A03 Current Mo dels 08H 00H 10H NP4100 08H 01H 10H NP4100W 11H 00H 12H NP64 11H 03H 12H NP43 13H 01H 10H M300X 13H 02H 10H M300W 13H 05H 10H M260X 13H 06H 10H M260W 13H 00H 11H P420X 13H 01H 11H P350X 13H 02H 11H P350W 14H 02H 10H U300X 14H 04H 10H U310W 15H 00H 10H PA600X 15H 01H 10H PA500X 15H 02H 10H PA550W 15H 03H 10H PA500U ...

  • NEC NP-UM330X-WK1 - page 51

    Legacy Models 01H 00H 03H MT1060/M T1065 01H 01H 03H MT860 01H 02H 03H MT1075 01H 00H 06H NP1000/NP2000 02H 00H 03H LT240/LT 260 02H 01H 03H LT220 02H 02H 03H LT24 0K/LT260K 02H 00H 05H LT245/LT 265 02H 00H 06H LT380 02H 01H 06H LT280 03H 00H 06H VT80 Ser ies 03H 00H 07H VT90 Ser ies 04H 00H 01H GT1150 04H 01H 01H GT21 50 04H 00H 03H GT5000 04H 01H ...

  • NEC NP-UM330X-WK1 - page 52

    DATA05 Calendar function 00 H : No function 01 H or 03H : Timer function, sleep timer function 02 H : Sleep timer function DATA06 .. 32 Reserved Response: At the time of a failure A0H 85H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) 078-2. RUNNING STATUS REQUEST **************************************** ****************************** Function: ...

  • NEC NP-UM330X-WK1 - page 53

    (*1) (*2) (*4) (*3) 078-3. INPUT STATUS REQUEST **************************************** ****************************** Function: This command acquires th e status of input signal of the projector. Command: 00H 85H 00H 00H 01H 02H 88H Response: At the time of a success 20H 85H 01H xxH 10H DATA01 .. DATA16 CKS (*1) (*2) (*3) Data Portion Contents -- ...

  • NEC NP-UM330X-WK1 - page 54

    01 H : Displaying DATA07 ..08 Reserved DATA09 Indicate Contents 00 H = Picture signal displaying 01 H = No signal 02 H = Viewer displaying 03 H = Test pattern displaying 04 H = LAN displaying DATA10 .. 16 Reserved Response: At the time of a failure A0H 85H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) 078-4. MUTE STATUS REQUEST **************** ...

  • NEC NP-UM330X-WK1 - page 55

    078-5. MODEL NAME REQUEST **************************************** ****************************** Function: This command acquires th e model name of the projector. Command: 00H 85H 00H 00H 01H 04H 8AH Response: At the time of a success 20H 85H 01H xxH 20H DATA01 .. DATA32 CKS (*1) (*2) (*3) Data Portion Contents ------------ ------------- --------- ...

  • NEC NP-UM330X-WK1 - page 56

    Function: This command controls the freeze. Command: 01H 98H 00H 00H 01H DATA01 CKS Operation types DATA01: 00H : Reserved 01H : Freeze start 02H : Freeze cancel Response: At the time of a success 21H 98H ID *0H 01H DATA01 CKS Data Portion Contents ------- ----------- ---------- ---------- ---------- ---------- -------- - DATA01 Results 00 H : Norm ...

  • NEC NP-UM330X-WK1 - page 57

    Data Portion Contents ------- ----------- ---------- ---------- ---------- ---------- -------- - DATA01 C5H fixed DATA02 Acquisition Object 00 H : MODE 01 H : POSITION 02 H : SOURCE Response: At the time of a success 23H B0H 01H xxH 03H DATA01 DATA02 DATA03 CKS (*1) (*2) (*3) Data Portion Contents ------- ----------- ---------- ---------- --------- ...

  • NEC NP-UM330X-WK1 - page 58

    if DATA02 is SOURCE(02H) 00H : OFF 01H : VIDEO 02H : S-VIDEO Response: At the time of a success 23H B1H 01H xxH 03H DATA01 DATA02 DATA03 CKS (*1) (*2) (*3) Data Portion Contents ------- ----------- ---------- ---------- ---------- ---------- -------- - DATA01 00H fixed DATA02 Update target ( Same as DATA02 of the transmit data ) DATA03 Results 00 H ...

  • NEC NP-UM330X-WK1 - page 59

    111. AUTO ADJUST EXECUTE2 **************************************** ****************************** Function: This command executes the Auto Adjust. Command: 03H BAH 00H 00H 01H 00H BEH Response: At the time of a success 23H BAH 01H xxH 01H 00H CKS (*1) (*2) (*3) Response: At the time of a failure A3H BAH 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) ...

  • NEC NP-UM330X-WK1 - page 60

    DATA02 DAT A03 DATA13 DAT A14 Current Models 03H 08H 00H 10H NP4100 03H 08H 01H 10H NP4100W FFH 1 1H 00H 12H NP64 FFH 1 1H 03H 12H NP43 FFH 1 3H 01H 10H M300X FFH 1 3H 02H 10H M300W FFH 1 3H 05H 10H M260X FFH 1 3H 06H 10H M260W FFH 1 3H 00H 11H P420X FFH 1 3H 01H 11H P350X FFH 1 3H 02H 11H P350W FFH 1 4H 02H 10H U300X FFH 1 4H 04H 10H U310W FFH 1 5 ...

  • NEC NP-UM330X-WK1 - page 61

    Legacy Models 00H 01H 00H 03H MT10 60/1065 00H 01H 02H 03H MT860 00H 01H 02H 03H MT10 75 00H 01H 00H 06H NP1000/NP2000 00H 02H 00H 03H LT240 /LT260 00H 02H 01H 03H LT220 00H 02H 02H 03H LT260 K 00H 02H 00H 05H LT245 /LT265 00H 02H 00H 06H LT380 00H 02H 01H 06H LT280 02H 02H 00H 05H LT180 02H 02H 00H 06H LT25/ LT30/LT 35 02H 02H 00H 07H NP40/NP50/NP ...

  • NEC NP-UM330X-WK1 - page 62

    DATA15 ... 16 Reserved Response: At the time of a failure A0H BFH 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) 305-3. PROJECTOR INFORMATION REQUEST **************************************** ****************************** Function: This command acquire s basic operation states of proj ector. Command: 00H BFH 00H 00H 01H 02H C2H Response: At the ...

  • NEC NP-UM330X-WK1 - page 63

    0CH : DIGITAL2 0DH : SCART 10H : AUTO FFH : Not Source Input Other : Not Support DATA06 Indication signal type (Effective only when Select source input type 2 is 02H or 03H) x0H : NTSC3.58 x1H : NTSC4.43 x2H : PAL x3H : PAL60 x4H : SECAM x5H : B/W60 x6H : B/W50 x7H : PALNM x8H : NTSC3.58 LBX x9H : NTSC3.58 SQZ xAH : COMPONENT(60Hz) xBH : COMPONENT( ...

  • NEC NP-UM330X-WK1 - page 64

    ============== ================= ================ ================= ====== 6.1. Response ---------- -------- ---------- ---------- ---------- ---------- ---------- -- * At the time of a success (ACK) This returns ACK without adding data p ortion to the command that does not request data. This returns ACK with adding data to the data portion for the ...

Fabricant NEC Catégorie Projector

Les documents que nous recevons du fabricant de l'appareilNEC NP-UM330X-WK1 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques NEC
- manuels d’utilisations NP-UM330X-WK1
- fiches produit NEC
- dépliants
- ou étiquettes-énergie NEC NP-UM330X-WK1
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation NEC NP-UM330X-WK1.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation NEC NP-UM330X-WK1, manuels d’entretien, brefs manuels ou manuels de l’utilisateur NEC NP-UM330X-WK1. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit NEC NP-UM330X-WK1.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil NEC NP-UM330X-WK1, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser NEC NP-UM330X-WK1 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs NEC NP-UM330X-WK1.

Le manuel d’utilisation complet NEC, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel NEC NP-UM330X-WK1 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières NEC NP-UM330X-WK1, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lNEC NP-UM330X-WK1 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil NEC NP-UM330X-WK1 - qui devraient nous aider dans les premières étapes lors de l'utilisation NEC NP-UM330X-WK1
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de NEC NP-UM330X-WK1
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service NEC NP-UM330X-WK1 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de NEC NP-UM330X-WK1?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec NEC NP-UM330X-WK1, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec NEC NP-UM330X-WK1 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)