-
John Lewis JLWM 1604 - page 1
JLWM 1604 1600 spin washing machine Instruction manual ...
-
John Lewis JLWM 1604 - page 2
Safety information It is most importa nt that this inst ruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always en sure that the book is supplied with the appliance in order that the new owner can get to know the f ...
-
John Lewis JLWM 1604 - page 3
• Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub a nd the inner drum. • Do not use your washing machine to wash articles with whalebones, material without hems or torn material. • Always unplug the appliance and turn off the water supply a ...
-
John Lewis JLWM 1604 - page 4
• The users should always check that they have not left their gas lighters (disposable or otherwise) in their clothing. • Never tumble dry items that have had contact with chemicals such as dry cleaning fluid. These are of a volatile nature and could cause an explosion. Only tumble dry items which have been washed in water or require airing. ? ...
-
John Lewis JLWM 1604 - page 5
Contents Operating instructions Safety information 2 General safety 2 Installation 3 Use 3 Child safety 4 Product description 7 Detergent dispenser drawer 8 Control panel 8 Programme Dial (2) 9 Spin (4) 9 Easy Iron (5) 9 Options - Prewash/Stain/Intensive (5) 9 Extra Rinse (7) 9 Quick (8) 10 Start Pause (9) 10 Door lock light (10) 10 Delay Start (11 ...
-
John Lewis JLWM 1604 - page 6
How to open the door du ring the cycle of a programme 15 End of programme 16 Helpful hints and tips 16 Washing programmes 18 Technical data 23 Consumptio n values 23 Care and cleaning 24 Descaling 24 External cleaning 24 Washing drum 25 Door seal 25 Cleaning the pump 25 6 ...
-
John Lewis JLWM 1604 - page 7
Product description 1 Detergent dispenser drawer 2 Control panel 3 Door opening handle 4 Rating plate 5 Drain pump 6 Adjustable feet 1 2 3 5 4 6 7 ...
-
John Lewis JLWM 1604 - page 8
Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain re mover used during the stain action phase (if available). The prewash and soa k detergent is added at the beginning of the wash programme. The stain remover is added during the stain action pha se. Compartment for powder or liquid detergent used for ...
-
John Lewis JLWM 1604 - page 9
12 3 4 5 6 7 8 9 1 0 1 1 1 Detergent dispe nser drawer 2 Programme selector dial 3 Display 4 SPIN reduction button 5 EASY IRON button 6 OPTIONS button 7 EXTRA RINSE button 8 QUICK button 9 START/PAUSE button 10 DOOR LOCK light 11 DELAY START button Programme Dial (2) It allows you to switch the appliance on/off and/or to select a programme. Spin (4 ...
-
John Lewis JLWM 1604 - page 10
people who are allergic to detergents, and in areas where the water is very soft. Quick (8) This option can be used for lig htly soiled laundry. The washing time will be reduced according to type of fabric and the selected temperature. Start Pause (9) This button allows you to start or to interrupt the selected programme. Door lock light (10) The l ...
-
John Lewis JLWM 1604 - page 11
cycle is very quiet and it ca n be selected at night or in times with a more economical power rate. On some programmes the rinses will be perfo rmed with more water. If the «Rinse Hold» or «Quiet» option has been selected the «Door lock» light is on, the «Start/Pause» button light goes out and the display shows a flashing «0». The door ca ...
-
John Lewis JLWM 1604 - page 12
First use • Ensure that the electrical and water connections comply with the installation instructio ns. • Remove the polystyrene block and any material from the drum. • Before the first wash, run a cotton cycle at the highest temperature without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a ...
-
John Lewis JLWM 1604 - page 13
Daily use Load the laundry Open the door by carefully pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door. Measure out the detergent Measure out the detergent and the fabric softener Pull out the dispenser drawer until it stops. Measure out the amo unt of detergen ...
-
John Lewis JLWM 1604 - page 14
Pressing the corresponding buttons to change those values. The green pilot light of the button 9 starts flashing. The dial can be turned either clockwise or counterc lockwis e. Turn to posi tion « Off » to reset programme/Switching the machine off. At the end of the programme the selector dial must be turned to position «Off» , to switch the ma ...
-
John Lewis JLWM 1604 - page 15
• Press 9 button again. Cancelling the delayed start • Press button 9 . • Press «Delay start» button once until the symbol «0’» is displa yed. • Press button 9 again. The Delay Start cannot be selected with the draining programme. Start the programme To start the selected prog ramme, press the button 9 ; the green pilot light stops fl ...
-
John Lewis JLWM 1604 - page 16
End of programme At the end of the programme, the washing machine stops a utomatically, the button 9 light and the Door lock light go off. The display shows a flashing ze ro «0». It is possible to open the door. If you had selected an o ption that ends with water left in the tub the Door lock light remains lit to indicate that the water must be d ...
-
John Lewis JLWM 1604 - page 17
Removing stains Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washin g. Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water. Oil based paint: moisten with benzine stain remover, lay the garme nt ...
-
John Lewis JLWM 1604 - page 18
Follow the product manufacturers’ instructions on quantities to use. Use less detergent if: • you are washing a smal l load • the laundry is lightly soiled • large amounts of foam f orm during washing. Degrees of water hardness Water hardness is classifie d in so-called “degrees” of hardness. Information on hardness of the water in your ...
-
John Lewis JLWM 1604 - page 19
Programme - Maximum and Minim um Temperature - Cycle Description - Maximum Spin Speed - Maxi mum Fabrics Load - Ty pe of Laundry Options Detergent Compartment Cottons Economy 1) 60° Main wash - R inses Maximum spin speed at 1600 rpm Max. load 7 kg White or fast colour cotton (normally or sli ghtly soiled items). This programme can be sel ected for ...
-
John Lewis JLWM 1604 - page 20
Programme - Maximum and Minimum Temperature - Cycle Description - Maxi mum Spin Speed - Maximum Fabrics Load - Type of Laundry Options Detergent Compar tment Synthetics 1) 60° - 40° Main wash - Rinses Maximum spin speed at 900 rpm Max. load 3.5 kg - Reduced load 1.5 kg Synthetic or mixed f abrics: underwear, coloured garments, non-sh rink shirts, ...
-
John Lewis JLWM 1604 - page 21
Programme - Maximum and Minim um Temperature - Cycle Description - Maximum Spin Speed - Maxi mum Fabrics Load - Ty pe of Laundry Options Detergent Compartment Wool - Hand wash 40° - 30° Main wash - R inses Maximum spin speed at 1000 Max. load 2 kg Washing progra mme for machine wa shable wool as well as for hand wa shable woollens and deli cate f ...
-
John Lewis JLWM 1604 - page 22
Programme - Maximum and Minimum Temperature - Cycle Description - Maxi mum Spin Speed - Maximum Fabrics Load - Type of Laundry Options Detergent Compar tment Rinse Rinses Maximum spin speed at 1600 rpm Max. load 7 kg With this programme it is po ssible to rinse and spin cotton garments which have been washed by hand. The machine performs a few rins ...
-
John Lewis JLWM 1604 - page 23
Technical data Dimensions Width Height Depth Depth (Overall dimensions) 60 cm 85 cm 60 cm 63 cm Electrical connection Voltage - Overall power - F use Information on the electrical co nnecti on is given o n the rating plate, on the inner edge of the appliance door. Water supply pressure Minimum Maximum 0,05 MPa 0,8 MPa Maximum Load Cotton 7 kg Spin ...
-
John Lewis JLWM 1604 - page 24
Care and cleaning You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separa tely fr om any l aundry washin g, and according to the softening ...
-
John Lewis JLWM 1604 - page 25
Cleaning the drawer recess Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powd er residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse programme without any clothes in the drum. Washing drum Rust deposits in the drum may occur due to rusting foreign bodies ...
-
John Lewis JLWM 1604 - page 26
• the appliance makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump. • a problem with water draining is detected (see chapter “What to do if...” for more details). Warning! Before opening the pump door, switch the appliance off and remove the mains plug from the socket. Proceed as follows: ...
-
John Lewis JLWM 1604 - page 27
9. Put the cap back on the emergency emptying hose and place the la tter back in its seat. 10. Replace the filter into the pump by inserting it correctly into the special guides. Screw the pump cover firmly by turning it clockwise. 11. Close the pump door. Warning! When the appliance is in use and depending on the programme selected there can be ho ...
-
John Lewis JLWM 1604 - page 28
6. Clean the filter in the valve with a stiff brush or with the piece of cloth. 7. Screw the hose back to the machine and make sure the connection is tight. 8. Turn on the water tap. Emergency emptying out If the water is not discharged, proceed as follows to empty out the machine: • pull out the plug from the power socket; • close the water ta ...
-
John Lewis JLWM 1604 - page 29
Installation Unpacking All transit bolts and packing mu st be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. After removing all the packaging, carefully lay mach ine on it’s back to remove the polystyrene base from the bottom. 2. Remo ...
-
John Lewis JLWM 1604 - page 30
5. Open the porthole and remove the polystyrene block fitted on the door seal. 6. Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supp lied in the bag containing the instruction booklet. Positioning and levelling Install the machine on a flat hard floor. Make sure that air circulat ion around the machine ...
-
John Lewis JLWM 1604 - page 31
of connectors are available from g ood hardware stores and plumbers merchants to suit most domestic plumbing . Any alteration to your existing plumbing must be carried out by a competent person, or qualified plumber. Water inlet An inlet hose is supplied and can been f ound inside the machine drum. Do not use the hose from your previous machine to ...
-
John Lewis JLWM 1604 - page 32
Warning! Installation should comply with l ocal water authority and bu ilding regulations’ requirements. The appliance must be connected to a cold water supply. A minimum water pressure of 0.05 MPa (0.5 bar) is required for sa fe operation of the appliance. If you cannot make the cold water connection direct from the rising mains, you may be able ...
-
John Lewis JLWM 1604 - page 33
If the outlet spigot has not been used before, remove any blanking plug that may be in place. Push the drain hose onto the spigot and secure with a clip, ensure a loop is formed in the drain hose (see diagram) to prevent waste from the sink entering the appliance. If you intend to drain the hose from the machine into a sink, make sure that the sink ...
-
John Lewis JLWM 1604 - page 34
SHOWER BA TH BIDET WASHING MACHINE DISHWASHER RAINWA TER ‘RUN-OFF’ SURF ACE WA TER DRAINS & SEWERS UNTREA TED DISCHARGE RIVER RIVER FOUL DRAIN FOUL SEWERS SEWAGE TREA TMENT WORKS TREA TED DISCHRGE SINK TOILET Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or comp ...
-
John Lewis JLWM 1604 - page 35
Important! Information on the electrical connection is given on the rating plate on the in ner edge of the appliance do or. The appliance is supplied with a 13 amp plug fitted. In the event of having to change the f use in the plug supplied , a 13 amp AS TA approved (BS1363/A) fuse must be used. Should the plug need to be re placed for any reason, ...
-
John Lewis JLWM 1604 - page 36
What to do if… Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below. Important! if you call out an engineer to a fault listed below, or to repa ir a fault caused by incorrect use or in ...
-
John Lewis JLWM 1604 - page 37
Problem Possible cause/Solution The mach ine does n ot fill: The water tap is closed ( E10 ). • Open the water tap. The inlet hose is squashed or kinked ( E10 ). • Check the inlet hose connection. The filter in the i nlet hose or the inlet valve filter is blocked ( E10 ). • Clean the water inlet filters (See «Cleaning the water inlet filters ...
-
John Lewis JLWM 1604 - page 38
Proble m Possib le cause/ Solution Unsatisfactory washing results: Too little detergent or u nsuitable detergent has been used. • Increase the detergent quantity or use ano ther one. Stubborn stains have not been treated prior to washing. • Use commerc ial produc ts to trea t the stubborn stains. The correct temperature was not selected. • Ch ...
-
John Lewis JLWM 1604 - page 39
Repairs - After Sales Service Repairs - After Sales Service Your appliance comes with a three year warranty. If it is not working correctly; consult the fault finding guides within this instruction boo k ("What to do if ..."). If a fault occurs wh ich you can not resolve through following the advice and informa tion contained within this ...
-
John Lewis JLWM 1604 - page 40
Environment concerns The sym bol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to th e appropriate collection point for the recycling o f electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative ...
-
John Lewis JLWM 1604 - page 41
41 ...
-
John Lewis JLWM 1604 - page 42
42 ...
-
John Lewis JLWM 1604 - page 43
43 ...
-
John Lewis JLWM 1604 - page 44
John Lewis Partners hip 171 Victoria Street London SW1E 5NN www.johnlewis.com 132944071-A-102011 ...
Avez-vous une question à propos de John Lewis JLWM 1604?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec John Lewis JLWM 1604, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec John Lewis JLWM 1604 il est probable qu’il a envie de partager la façon de le résoudre.