Français dropdown-ico

Manuel d’utilisation Paradyne 8779

182 pages 0.96 mb
Télécharger

Aller à la page of 182

Summary
  • Paradyne 8779 - page 1

    Hot wi re ® TDM SDSL T ermination Units Mod els 877 7 and 87 79 User ’ s Gu ide Doc u ment No. 8 700-A2-GB 20-40 Ma y 2002 ...

  • Paradyne 8779 - page 2

    A May 2002 8700-A2- GB20-40 Copyrigh t © 200 2 Par ad yne Corp oration. A l l r i g h t s re s e rv e d . Printe d in U . S.A . Notice This pub licat ion is prote cte d b y f edera l cop yright la w . No par t of this pub li cat ion may be c opied or dist ri but ed, tr ansmi tted, tr ans cribed, stor ed in a retrie v al syst em, or tr anslat ed in ...

  • Paradyne 8779 - page 3

    8700-A 2-GB20-40 May 200 2 i Contents Ab o u t T h is G u id e Document Purpose and Intend ed Audience . . . . . . . . . . . . . . . . . . . . v New Fe atures f or t his Relea se . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Documen t Summ a ry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Pr o duct ...

  • Paradyne 8779 - page 4

    Conten ts ii May 2002 8700-A2- GB20-40 Accessing and Displaying Configuration Options . . . . . . . . . . . . . . . . 3-4 Current and Defaul t Factory Con figurations . . . . . . . . . . . . . . . . . 3-5 Configuration Loader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 Savi ng Confi gurati on Op tions . . . . . . . . . ...

  • Paradyne 8779 - page 5

    Content s 8700-A 2-GB20-40 May 200 2 iii Perf ormance Stati stics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 1 Vie wing Ne twork Err or Sta tistic s . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12 Vie wing Netwo rk Per formance Stat i sti cs . . . . . . . . . . . . . . . . . . . . 7-13 Vie wing DSX- 1 Per ...

  • Paradyne 8779 - page 6

    Conten ts iv May 2002 8700-A2-GB20-4 0 Sy stem Cloc k . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-15 Cross-Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-19 Setting Cross-Connect Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-20 As signi ...

  • Paradyne 8779 - page 7

    8700-A 2-GB20-40 May 200 2 v About Th is G uid e Document P u rpose and Intended A udience This gui de con tains in f ormation n eeded t o set u p , c onfig ure , and op erate Hotwire 8777 and 8779 Time Division Multiplex e r Symmet ri c Digital Subscriber Line (TDM S DSL) T er mination Units, and is intend ed f or ins tallers and o perators. New F ...

  • Paradyne 8779 - page 8

    Ab out Th is Gu ide vi M ay 2002 8700-A2-GB20-4 0 A m aster glo ssary of ter ms and acronyms u sed in Paradyne docum ents is av ailable on t h e World Wide Web a t ww w .par a dyne .c om . Select Library → T echn ical Manuals → T echnical G lossary . Pr oduct-Related Do cuments Complete docum enta tion for this product is a vailable on t h e Wo ...

  • Paradyne 8779 - page 9

    8700-A 2-GB20-40 May 200 2 1-1 1 Abou t Hotwi re 8777 an d 8779 TDM SDS L U ni ts TDM SDSL Over vie w Hotwire ® Ti me Division M ul tiplex er Symm etric Digital Subscrib er Line (TDM SDSL) products maxim ize customer ser vice areas by v ar y ing the DSL line rate . This ensures symmetr ic DSL connectivity ov er a wide range of t eleph one line dis ...

  • Paradyne 8779 - page 10

    1. About Hot wire 877 7 and 8 779 TDM SDSL Units 1-2 May 2002 8700-A2- GB20-40 TDM SDSL F eatures The 2-wire Hotwire 8777 or 8779 TDM SDSL T er m ina tion Unit is a circuit board that is m oun ted in a Hotwire 8610 or 88 10 Digital Subscr ibe r Line Access Multiple xer (DSLAM), or an 8620 or 8820 GranDSLAM, and used to tr ans por t signals at high ...

  • Paradyne 8779 - page 11

    1. About Ho twire 87 77 and 8779 TDM SDSL Units 8700-A 2-GB20-40 May 200 2 1-3 Network Conf igurat ion F igu re 1- 1, Sam ple CO -t o-C P C on fi gu ra ti on , s hows a T1 net work application using a Hotwire 8777 or 8779 T er m ination Unit f or access conce ntration in a central offi ce (CO). A frame rela y switch and a router are connected to pa ...

  • Paradyne 8779 - page 12

    1. About Hot wire 877 7 and 8 779 TDM SDSL Units 1-4 May 2002 8700-A2- GB20-40 SNMP M ana gement Capabi lities The ter minat ion unit suppor t s SNM P V ersion 1, and can be managed by any industr y-s tandard SNM P m anag er and access ed using S NMP by e xternal SN MP managers. Manageme nt Inf ormation B ase (MIB) Suppor t F or a detailed descr ip ...

  • Paradyne 8779 - page 13

    8700-A 2-GB20-40 May 200 2 2-1 2 Using the Asynchr o nous T erminal Interface Use r Inte rfa ce Acce ss Y ou can comm unicate with the async hronous ter m inal interf ace (A T I) using o ne of the follo wing methods : Direct connection through the Manageme nt Seri al por t of the DSLAM (locally or via an extern al mod em). T el net session using a ...

  • Paradyne 8779 - page 14

    2. Using t he Asynchr onous Te rminal I nterface 2-2 May 2002 8700-A2- GB20-40 Log gin g In to th e Ho twi r e DSL AM Y ou can l og in t o the Hotwire DSLA M sy stem u sing either a local VT100-compat ib le ter minal or a remote T el net connec tion. Afte r y ou enter your us er ID and pass w o rd , the syst em displa ys th e Hotwir e Chassis M ain ...

  • Paradyne 8779 - page 15

    2. Usi ng the Asynchrono us Terminal Int erface 8700-A 2-GB20-40 May 200 2 2-3 After you en ter a valid login ID an d p assword, the Main M enu appears . Entry to al l of the ter mi nation unit ’ s t asks begins a t the Main Menu screen. What appears on the screens depends on the: Current configuration – How your unit is currently configured. E ...

  • Paradyne 8779 - page 16

    2. Using t he Asynchr onous Te rminal I nterface 2-4 May 2002 8700-A2- GB20-40 Men u Hiera r chy The following illustration shows the paths to the various A TI screens. Main Status Te s t System and T est Status P erformance Statistics Display LEDs Identity Network Error Statistics Network P erformance Statistics Configuration Control Change Identi ...

  • Paradyne 8779 - page 17

    2. Usi ng the Asynchrono us Terminal Int erface 8700-A 2-GB20-40 May 200 2 2-5 Scree n W o rk A rea s There are two user wor k areas: Screen area – T his is the area a bov e the do tted line that provides the m enu path, menus, and i n put fields. The menu path appears as the first l ine on the screen. In this m anual, the menu path is p rese nte ...

  • Paradyne 8779 - page 18

    2. Using t he Asynchr onous Te rminal I nterface 2-6 May 2002 8700-A2- GB20-40 Na vig ati ng the Scr e ens Y ou can navigat e the screens by: Using ke yboard ke ys Using function k eys Switching between the two screen areas K eyboard K eys Use the f ollowing ke yboard ke y s to navigate within t h e screen. Proced ure T o m ake a menu or f ield sel ...

  • Paradyne 8779 - page 19

    2. Usi ng the Asynchrono us Terminal Int erface 8700-A 2-GB20-40 May 200 2 2-7 The current setting or value ap pears t o the r ight of the f ield nam e. Y ou c an en ter infor mat ion in to a se lecte d f ield by: T y ping i n the first letter(s) of a f ield value or comman d. Switching from t he s creen a rea to the function ke y and m essage area ...

  • Paradyne 8779 - page 20

    2. Using t he Asynchr onous Te rminal I nterface 2-8 May 2002 8700-A2- GB20-40 Switching B etw een Screen W or k Areas Select Ctrl-a to switch between the two sc reen work areas to perf or m all screen functions. Proced ure T o ac cess the function ke y and messag e area below the d otted line: 1. Press Ctrl-a to s witch from the screen area to the ...

  • Paradyne 8779 - page 21

    2. Usi ng the Asynchrono us Terminal Int erface 8700-A 2-GB20-40 May 200 2 2-9 Ending an A TI Session Use the E xit function key from any screen to termin ate the sessio n. Proced ure T o end a s ession with the asynch ronous ter m inal interf a ce: 1. Press Ctrl-a to go to t he function k eys below the dotted line . 2. Sav e changes i f required . ...

  • Paradyne 8779 - page 22

    2. Using t he Asynchr onous Te rminal I nterface 2-10 May 2002 8700-A2- GB20-40 ...

  • Paradyne 8779 - page 23

    8700-A 2-GB20-40 May 200 2 3-1 3 Initi al Sta r t up a nd Co nfiguration Overvi ew This chapter provides instructions on how t o access and configure your Hotwire TDM SDSL T e rm in ation Unit f or t he first time , display configuration options, disable o r reset the A utoRat e f eat ure, and do wnl oad fir mware. These procedures include: Enterin ...

  • Paradyne 8779 - page 24

    3. Init ial Startup and Conf igurati on 3-2 May 2002 8700-A2- GB20-40 En t eri ng Id en t i ty Inf orma tio n After accessing your uni t f or the first ti m e, use the Change Identity screen to determine S NMP administ rativ e syst em inf ormation th at will be disp lay ed on the Identity screen of the St atus branch. T o access the Card Identity s ...

  • Paradyne 8779 - page 25

    3. Initi al Startu p and Confi gur atio n 8700-A 2-GB20-40 May 200 2 3-3 Proced ure T o ent er Change Id entity screen inf or m ation: 1. P o sition the cursor in the Syst em Nam e field. Enter a nam e unique i n your network to identify the SNMP man aged node (or unit) 2. P o sition the cursor in the System Location field. Enter the ph ysical loca ...

  • Paradyne 8779 - page 26

    3. Init ial Startup and Conf igurati on 3-4 May 2002 8700-A2- GB20-40 Accessing and Displaying Conf igurati on O pti ons T o displ a y conf iguration options, y ou must first lo ad a configu ration into the edit area. T o load a configuration op tion set into the con figuration edit area, foll ow this menu selection sequence: Ma in Menu → Configu ...

  • Paradyne 8779 - page 27

    3. Initi al Startu p and Confi gur atio n 8700-A 2-GB20-40 May 200 2 3-5 Curr ent and Default F a ctory Conf igurations The Configuration Edit/Display sc reen appears when the current or default configuration is loaded. T o access the Configuration Edit/Display s creen, f ollow this menu s elec tion seq uence: Ma in Menu → Configuration → Curre ...

  • Paradyne 8779 - page 28

    3. Init ial Startup and Conf igurati on 3-6 May 2002 8700-A2- GB20-40 See App endix A, Configuration Opt ions , f o r a list and e xplanati on of the configuration o ptions availab l e S el ec t . . . T o A c ce ss t he . . . T o C o nfigu re th e . . . Network Network Interf ace Opti ons ( Ta b l e A - 1 ) DSL inte rface ports . DSX-1 G.703 DSX-1 ...

  • Paradyne 8779 - page 29

    3. Initi al Startu p and Confi gur atio n 8700-A 2-GB20-40 May 200 2 3-7 Conf igurat ion Loader The Conf iguration Load er sc reen allows y ou to upload configurations to and download c onfigurations from a TFTP ser ver or the M CP F FS. T o a ccess the Configuration Loader screen, f ol low this m enu select ion sequence: Ma in Menu → Configurati ...

  • Paradyne 8779 - page 30

    3. Init ial Startup and Conf igurati on 3-8 May 2002 8700-A2- GB20-40 2. P o sition the cursor in the TFT P Server IP Add ress field. Enter the TFT P server IP add ress or M1 fo r t h e M C P F F S . The first t h ree digits of the I P address cannot be 000 or greater t ha n 223. 3. P o sition the cursor in the TFTP T ransfer Direction field. Use t ...

  • Paradyne 8779 - page 31

    3. Initi al Startu p and Confi gur atio n 8700-A 2-GB20-40 May 200 2 3-9 Sa v ing Co nf igurati on O ptions When chang es are made to the configuration options through the Configuration Edit/Display branc h, the changes must be sav ed to take effect. Use th e S ave k ey or Sa ve Configuration screen. Proced ure T o s av e co nfiguration options cha ...

  • Paradyne 8779 - page 32

    3. Init ial Startup and Conf igurati on 3-10 May 2002 8700-A2- GB20-40 Restoring Access t o the User Interface Improper configuration of the unit could render the user in terf a ce inacce ssible. If this occurs, acces s can be restored u sing the m anagem ent card of the DSLAM. Proced ure T o reset the DSL Card using t he DSLAM ’ s man agem ent c ...

  • Paradyne 8779 - page 33

    3. Initi al Startu p and Confi gur atio n 8700-A 2-GB20-40 May 200 2 3-11 Disabling A utoRate The AutoRate f unction i s controlle d from the Network Interface Options screen and allows you t o enable o r disable the AutoRate f eature. The AutoRat e option i s only av ailable if the unit is configured as an L T U . T o acc ess t he Networ k I nterf ...

  • Paradyne 8779 - page 34

    3. Init ial Startup and Conf igurati on 3-12 May 2002 8700-A2- GB20-40 Downl oadi n g Firmwar e The Download Code screen allows you to download f irmware from a T FTP ser ver or MCP FFS. T o ac cess the Downlo ad Co de screen, f ollow this m enu selection sequence: Ma in Menu → Control → Do wn load Code Proced ure T o download firm ware: 1. P o ...

  • Paradyne 8779 - page 35

    3. Initi al Startu p and Confi gur atio n 8700-A 2-GB20-40 May 200 2 3-13 5. P o sition the cursor at the Star t T r ansfer field. Use the spac ebar to select Y es. Pr e ss Ent er . When t he data transfer is com plete: — If you selec ted Y es in Step 4, the unit is reset. — If you selec ted No in Step 4, the T r ansfer St at us field changes t ...

  • Paradyne 8779 - page 36

    3. Init ial Startup and Conf igurati on 3-14 May 2002 8700-A2- GB20-40 ...

  • Paradyne 8779 - page 37

    8700-A 2-GB20-40 May 200 2 4-1 4 Cr oss- Connecting P orts Ov erv iew Configuration of t h e cross-c onnect ions consists of the f ollowing steps: ❑ Deter mine h ow the po r ts will be c onnec ted and configured . ❑ On th e Ne twork In terf ace Options scr een, e nable the DSL po r ts t hat will be in the cross-connec tion if necessar y . The p ...

  • Paradyne 8779 - page 38

    4. Cros s-Connecti ng Ports 4-2 May 2002 8700-A2- GB20-40 Det er m i nin g t h e Con fig ura t io n The Hotwire cross-conne ct system allows you t o connect the DSX-1 or G.703 por ts to the DSL por ts in a v ar iety of wa ys: DS1 By pass m ode – The entire DSX -1 or G .703 interf a ce is connected t o the DSL interface . DS1 Cross-Connect mode (8 ...

  • Paradyne 8779 - page 39

    4. Cr oss-Connect ing Port s 8700-A 2-GB20-40 May 200 2 4-3 NO TES: — Although the e x am ple shows por ts dedicated to v oice or data , a p or t can be configured f or bot h v oice and dat a. — F or G.703 por t s using Common Channel Signaling (CCS) t h at are in DS0 Cross-Connect mode, you must e xplicitly conf igure the cross-c onnections f ...

  • Paradyne 8779 - page 40

    4. Cros s-Connecti ng Ports 4-4 May 2002 8700-A2- GB20-40 Setting the Cr o ss-Connect Modes T o acc ess the Set Cross-Connect Mode screen, f ol low this m enu selection sequence: Ma in Menu → Configuration → Current Configuration → Cross-Conne ct → Set Cross-Connect Mode When t he screen is first d ispla y ed, a ll por ts a re set to DS1 B ...

  • Paradyne 8779 - page 41

    4. Cr oss-Connect ing Port s 8700-A 2-GB20-40 May 200 2 4-5 As si gni ng T ime S lot s Y ou m ay find it hel pful to m ap your cross -connection a ssig nments on a worksheet bef o re conf iguring them in t he unit. In t he f ol lo wing example, the worksh eet f or DSX-1 P or t 1, odd-numbered time slots from DSL P o r ts 1 and 2 are a ssig ned to t ...

  • Paradyne 8779 - page 42

    4. Cros s-Connecti ng Ports 4-6 May 2002 8700-A2- GB20-40 T o acc ess t he Ass ign T ime S lots scr een, f ol lo w this m enu sel ection sequ ence: Ma in Menu → Configuration → Current Configuration → Cross-Conne ct → As si gn Time Sl ot s When t he screen is first d ispla y ed, por t a nd t ime slot ass ignments a re blank. The f ollowing ...

  • Paradyne 8779 - page 43

    4. Cr oss-Connect ing Port s 8700-A 2-GB20-40 May 200 2 4-7 When the Cross-Connec t Mode screen is displa yed now , 1,2 appears next t o DSX-1 P or t s 1 and 2 because time slots associated with the cross-connection hav e been assigned . main/config/xconnect_mode Slot: 18 Model: 8777 CROSS-CONNECT M ODE DSX-1 Port MODE DSL Port 1 DS0 Cross-connec t ...

  • Paradyne 8779 - page 44

    4. Cros s-Connecti ng Ports 4-8 May 2002 8700-A2- GB20-40 ...

  • Paradyne 8779 - page 45

    8700-A 2-GB20-40 May 200 2 5-1 5 IP Add r ess ing Selecting an IP Addr essing Scheme Y our IP a ddressing scheme dep ends in p ar t whethe r the man agement card con tro llin g the ch a s si s is r un n in g IP C on s er vative sof t war e. Conf igurations Not Runnin g IP Conser v ative Soft ware In a configuration n ot ru nning IP Conser vative s ...

  • Paradyne 8779 - page 46

    5. IP Addr essi ng 5-2 May 2002 8700-A2- GB20-40 All Conf igurations The NT U ob tains its IP ad dress when the PPP l ink is established o v er the E OC. Use the A TI t o assign: An IP address f or eac h NMS. See T ab l e A-14, SN MP N MS Secu rit y Optio ns , in Appendix A, Configuration Options . An IP addres s f or the T FTP s er ver y o u wis h ...

  • Paradyne 8779 - page 47

    8700-A 2-GB20-40 May 200 2 6-1 6 Security Ov erv iew The Hotwire T er m ina tion Unit in I P Com plex m ode provides se veral m ethods of limiting user access to the A T I through option settings. Y ou can: Enable the T elnet Login Required option. Limit the access b y setting a Session Acces s Le vel option of Operator f or the T el net S ession. ...

  • Paradyne 8779 - page 48

    6. Secur ity 6-2 May 2002 8700-A2- GB20-40 A TI Acce ss Levels The Hotwire T er m ina tion Unit has two access le vels: Adm inistrator and Operator . The access lev el determ ine s what functions are acc essibl e, as shown in Ta b l e 6 - 1 , Ac cess Le v e ls . Access lev els can be applied to Login IDs and T elnet sessions. When acc ess is throug ...

  • Paradyne 8779 - page 49

    6. Sec urity 8700-A 2-GB20-40 May 200 2 6-3 Creating a Lo gin Logins apply to T elne t acces s directly to t he A TI of t h e Hotwire T er minati on Unit. The Administer Logins menu option is not presented when you access the unit through the manage men t card of the DSLAM and when in IP Conser v a tive mode . Six login ID/passw ord com bination s ...

  • Paradyne 8779 - page 50

    6. Secur ity 6-4 May 2002 8700-A2- GB20-40 3. Create the login by enter ing the fol lowing fields. Login IDs and pass words are case-s e nsit iv e. NO TE: Assign at least one Administra tor-le vel Login ID . F ull acc ess is necess ar y to make configuration op tion c hanges an d admi nister log ins. 4. Press Ctrl-a to s witch to t he func tion k e ...

  • Paradyne 8779 - page 51

    6. Sec urity 8700-A 2-GB20-40 May 200 2 6-5 Cont roll ing SNMP Access There are three methods f or limiting SN MP access. Disab l e the SNMP ma nagem ent option. Ref er to T able A -13, G eneral SNMP Managem ent O ptions, in A pp endix A, Configuration Opt ions . Assign S NMP com munity names an d acc ess t ypes. Limit SNM P ac cess t hrough valida ...

  • Paradyne 8779 - page 52

    6. Secur ity 6-6 May 2002 8700-A2- GB20-40 ...

  • Paradyne 8779 - page 53

    8700-A 2-GB20-40 May 200 2 7-1 7 Monit o ring an d T rou bles ho oting What to M oni tor This chapter presents information on how to mo nitor ter minat ion unit status, assess perf o r man ce, and diagnose problems as described in the f ollowing sect ions: Viewing System and T es t Statu s on page 7-2 — Health and Status Messages — Self-T est R ...

  • Paradyne 8779 - page 54

    7. Monitor i ng a nd Troub l eshoot ing 7-2 May 2002 8700-A2- GB20-40 V iew ing System a nd T est Sta tus T o v iew System and T est Status inf o rm at ion, f oll ow this menu s el ection sequ ence: Ma in Men u → Stat u s → Sys tem and T e st Status The System and T est Status screen has three sections: Health and Status – Displa ys messages ...

  • Paradyne 8779 - page 55

    7. Mon itoring and Tr oubleshoot ing 8700-A 2-GB20-40 May 200 2 7-3 Health an d Status M essages The following messag es app ear in t he first column of the Sys tem and T est Status screen. The highest pr ior ity Health and Status message also appe ars on all A TI screens on the bottom right. T abl e 7-1. H eal th and Status Messag es (1 of 4) M es ...

  • Paradyne 8779 - page 56

    7. Monitor i ng a nd Troub l eshoot ing 7-4 May 2002 8700-A2- GB20-40 IBMC Not Supported on MCP The Inband Manag ement Channel ( IBMC) i s enab led, but the MCP card does not support Inband Management . 1. Disab le the Inband Manag em ent Chan nel. 2. Downl oad the MCP with a ver sion of code that supports inband managem ent. IP Mis matc h , Pt n T ...

  • Paradyne 8779 - page 57

    7. Mon itoring and Tr oubleshoot ing 8700-A 2-GB20-40 May 200 2 7-5 LOS at Net, Pt n An LO S (Loss Of Signa l ) condit ion has been detec ted on the netw ork interf ace. No signal is be ing r eceived on Po r t n , poss ib ly du e to a l oca l network prob lem. 1. V erify that t he network cab le is secur ely attac hed at both ends. 2. V erify pr op ...

  • Paradyne 8779 - page 58

    7. Monitor i ng a nd Troub l eshoot ing 7-6 May 2002 8700-A2- GB20-40 Primary Clock F ailed, Pt n A f ail ure ha s occur r ed i n th e primary cloc k source f or the DSX-1 or G.703 por t. 1. V erify that t he network cab le is secur ely attac hed at both ends. 2. V erify th e cloc k conf ig uration on the uni t and attached equipmen t. 3. Contact n ...

  • Paradyne 8779 - page 59

    7. Mon itoring and Tr oubleshoot ing 8700-A 2-GB20-40 May 200 2 7-7 Self -T est Res ult s Message s The results of the la st power-on or reset self-test appear in the m iddle column o f the System and T est Statu s screen. T abl e 7-2. Se lf-T es t Results Messag es (1 of 2) M essage Wha t Message Indicates What T o Do CPU F ai l The Centr al Proce ...

  • Paradyne 8779 - page 60

    7. Monitor i ng a nd Troub l eshoot ing 7-8 May 2002 8700-A2- GB20-40 FPGA F ailed The Field Pr ogram m able Gate Arr ay serving al l por ts f ailed. 1. Rese t th e unit and tr y again. 2. Call your ser vice repre sentativ e f or as si st anc e. G.703 F ail ed, Pt 1 The uni t f ailed to loop data on the G.703 on P or t n . Me mo ry Te s t n Fa i l ...

  • Paradyne 8779 - page 61

    7. Mon itoring and Tr oubleshoot ing 8700-A 2-GB20-40 May 200 2 7-9 T e st Status Mes sages The T est Status messages in the f o llowing t a ble appear i n t he righ t column of the System and T est Status s creen. F or fur ther in f or mation on tes ting, refer to Chapt er 8, Te s t i n g . T abl e 7-3. T est Stat us Mess ages T est Statu s Messag ...

  • Paradyne 8779 - page 62

    7. Monitor i ng a nd Troub l eshoot ing 7-10 May 2002 8700-A2- GB20-40 De vice Mess ages The Device Messages in Ta b l e 7 - 4 , listed in alp habetical order , m ay appear i n the messag es area at the bottom of the A TI screens. T abl e 7-4. De vice Messages (1 of 2) Devic e Message What Message Indicates What T o Do 0.0.0. 0 is an in valid IP ad ...

  • Paradyne 8779 - page 63

    7. Mon itoring and Tr oubleshoot ing 8700-A 2-GB20-40 May 200 2 7-11 P erf orma nce St atis tics P e rf orm ance stat istics c an a ssist you in de ter mini ng the duration of spec ific conditions and provide a hi stor ical co nte xt for problem detection and analysis. Statistics are maintained f or up to 96 15-minute inter v a ls (24 hours). Selec ...

  • Paradyne 8779 - page 64

    7. Monitor i ng a nd Troub l eshoot ing 7-12 May 2002 8700-A2- GB20-40 V i ewing Network Error Statistics The termi nal unit maintains error statistics on the n etwor k DSL interf ace for each por t. T o view Network Error Statistics, f ollow this menu s e lection sequenc e: Ma in Men u → Stat u s → P er f orma nc e S t at i sti cs → Network ...

  • Paradyne 8779 - page 65

    7. Mon itoring and Tr oubleshoot ing 8700-A 2-GB20-40 May 200 2 7-13 F i eld s on t h i s sc re en i ncl u de : V i ewing Network Perform ance Statistics Network pe rformanc e stat istics allow you to monitor t he current s tatus o f network DSL o perations. T o view Netwo rk P erf or mance Statistics, fol l ow this menu s election seque nce : Ma i ...

  • Paradyne 8779 - page 66

    7. Monitor i ng a nd Troub l eshoot ing 7-14 May 2002 8700-A2- GB20-40 The f ollowing Network P erf o rm anc e S tatistics are collected f or the selected por t: Mrgn: Signal to Noise Ratio (SNR) Margin, the amount (in dB) t hat the Receive signal has exceeded the v alu e needed to maintain a Bit Error Rate (BER) of 10 – 6 or be tter . Xmt Pw : T ...

  • Paradyne 8779 - page 67

    7. Mon itoring and Tr oubleshoot ing 8700-A 2-GB20-40 May 200 2 7-15 V i ewing DSX-1 Perform ance Statistics DSX-1 performanc e statistics allow you to monitor the current statu s of the DSX-1 interf ace when E SF framing is selected. T o v iew DSX-1 P erformance S tatistics, f o llow this m enu s election sequenc e: Ma in Men u → Stat u s → P ...

  • Paradyne 8779 - page 68

    7. Monitor i ng a nd Troub l eshoot ing 7-16 May 2002 8700-A2- GB20-40 St a tus: Contains the cont ents of t he status ev ents register . The status ev ents register maintains a histor y of specific e vents that ha ve occurred during an inter val. V alues i nclude: — Y : Remote alar m i ndication signal (yellow alar m) recei v ed a t the DSX -1 i ...

  • Paradyne 8779 - page 69

    7. Mon itoring and Tr oubleshoot ing 8700-A 2-GB20-40 May 200 2 7-17 V i ewing G.703 Perf or mance Statistics G.703 perf or m anc e statistics allo w you to monitor the current status of t he G. 703 interf ace when Fr am ed mo de is selected. T o v iew G.703 P erf or m ance Stat istics, f ollow this m enu s election sequenc e: Ma in Men u → Stat ...

  • Paradyne 8779 - page 70

    7. Monitor i ng a nd Troub l eshoot ing 7-18 May 2002 8700-A2- GB20-40 St a tus: Contains the cont ents of t he status ev ents register . The status ev ents register maintains a histor y of specific e vents that ha ve occurred during an inter val. V alues i nclude: — Y : Remote alar m indicat ion signal received at t he G.703 interf ace — L : L ...

  • Paradyne 8779 - page 71

    7. Mon itoring and Tr oubleshoot ing 8700-A 2-GB20-40 May 200 2 7-19 V iewing Current Network P er formance Statistics The Current Network P erf or m anc e Statistics screen allows y ou to monitor selected current network status and error inf or m ation for both the near- and f ar-end units from a single screen. T o view Current Network Perf or m a ...

  • Paradyne 8779 - page 72

    7. Monitor i ng a nd Troub l eshoot ing 7-20 May 2002 8700-A2- GB20-40 Fields o n this screen in clude: V iewing I nband Management Statistics The Inband Manage men t Statistics screen allows you to monitor the Inband Managem ent Ch annel (I MC). NO TE: The Inband Manage men t Statistics screen is only a vailabl e for Model 877 9 T er m ina tio n U ...

  • Paradyne 8779 - page 73

    7. Mon itoring and Tr oubleshoot ing 8700-A 2-GB20-40 May 200 2 7-21 The f ollowing Inband Managem ent Statistics are collected: TX Fram e s : A count of the total number o f frames sent to the IBMC , the number of f rames s ent to t he Data L ink Connec tion Identifier (DLCI), and the number of f rames sent to the Local Management Interface (LMI) ...

  • Paradyne 8779 - page 74

    7. Monitor i ng a nd Troub l eshoot ing 7-22 May 2002 8700-A2- GB20-40 V ie wing L ED Stat us The unit LEDs can be view e d on the Displa y LEDs Status screen , a vailab le locall y and remotely . The LE Ds are organized into thre e groups: System L EDs display t h e status of the unit DSX-1 or G.703 LE Ds provide the st a tus of the DTE interf ace ...

  • Paradyne 8779 - page 75

    7. Mon itoring and Tr oubleshoot ing 8700-A 2-GB20-40 May 200 2 7-23 T able 7-5 shows t he meaning of the poss ib le values for each LED repres ented. T abl e 7-5. Display LEDs Scr een T ype Label V alue is . . . I ndicating . . . SYSTEM Alarm O n Of f De vi ce f ailure , P ower- On Self- T est (POS T) fai lure, port s i noperab le or unab le to tr ...

  • Paradyne 8779 - page 76

    7. Monitor i ng a nd Troub l eshoot ing 7-24 May 2002 8700-A2- GB20-40 Front Pan e l LED s The f o llowing t a ble describes the meaning and states of the LEDs on the f acepl ate. The LEDs f or PORTS represent the DTE or DSL por ts, depending upon the P or t LEDs selection on t he C ontrol screen (see Changing the Meaning of the POR TS LED s on pag ...

  • Paradyne 8779 - page 77

    7. Mon itoring and Tr oubleshoot ing 8700-A 2-GB20-40 May 200 2 7-25 Chang ing the M eanin g of the PORT S LE Ds The LEDs f or PORTS on the f ront panel represent the status of t h e DSL network or DTE por ts, depending on the P or t LEDs configuration option. The LED displa y can a lso b e selec ted at any t ime through t he Control bran ch. Proce ...

  • Paradyne 8779 - page 78

    7. Monitor i ng a nd Troub l eshoot ing 7-26 May 2002 8700-A2- GB20-40 An LED i s not lit. LED is out. Run t he Lamp T est. I f the LED in q uestion d oes not flash with the othe r LEDs, then cont act your ser vic e repr esentati ve . Not recei vi ng data. The network or DTE port cabl es are not con nect ed (chec k front panel LEDs f or more inf or ...

  • Paradyne 8779 - page 79

    8700-A 2-GB20-40 May 200 2 8-1 8 Te s t i n g Ac cessin g the T est Menu F rom the T est menu, you can r un networ k tests, data po r t t ests, and a front panel lam p tes t . T o ac cess the T es t menu, f o llow this menu sel ec tion sequenc e: Ma in Men u → Te s t S el ec t . . . T o . . . Network & DSX-1 T ests Network & G.703 T ests ...

  • Paradyne 8779 - page 80

    8. Test ing 8-2 May 2002 8700-A2- GB20-40 Running Network T ests Network tests require the par ticipa tion of y our n etwork ser vice provider . T o acces s the Network T est s screen, foll ow this me n u sele ction sequen ce: Ma in Men u → Te s t → Netwo rk & DSX-1 T ests – or – Ma in Men u → Te s t → Network & G .703 T ests ma ...

  • Paradyne 8779 - page 81

    8. Test ing 8700-A 2-GB20-40 May 200 2 8-3 Use the Command co lum n to sta r t or sto p a tes t . W he n th e St at u s column shows that a test is Inacti v e, Start is display ed; w hen a test i s Active, Stop is d is played. P o sition the cursor at the desired Star t or Stop command and pres s Enter . The Results column displays the t e st durat ...

  • Paradyne 8779 - page 82

    8. Test ing 8-4 May 2002 8700-A2- GB20-40 Netw ork Line Loopback A Networ k L ine Loopba ck (LLB) lo ops the received signal on the net work in terf ace back to th e ne twork without chan ge. F or DSX-1 models: If the DSL port is in a DS0 c ross -connec tion, correspon ding DSX-1 time slots are sent all ones. If the DSL por t is in Bypas s mode or ...

  • Paradyne 8779 - page 83

    8. Test ing 8700-A 2-GB20-40 May 200 2 8-5 Repeater Loopback A Repeater Loopback (RLB) loops the da ta nor m ally sent to the DSL p or t back t o the conn ected DTE por ts. The DSL por t is sent all ones and data received on the DSL link is i gno red. Proced ure T o ru n a Repeater Loopback: 1. P o sition the cursor at the Star t command next to Re ...

  • Paradyne 8779 - page 84

    8. Test ing 8-6 May 2002 8700-A2- GB20-40 DTE Loopback DTE Loopba ck l oo ps the DSX-1 or G.703 signal back to itself , retaining (bipolar violation) BPV transparency . A lso: If the DSX-1 or G.703 por t is in a DS0 cross-conne ction , the time sl o ts cross-conne cted to the DSX-1 or G .703 p or t a re sent all ones. If the DSX-1 or G.703 por t is ...

  • Paradyne 8779 - page 85

    8. Test ing 8700-A 2-GB20-40 May 200 2 8-7 Remot e Send Line Loopback The local unit i ni tiates this test b y se nding a line loopback Up or Down comm and to the r e mote unit for 10 second s. When the remote unit detects the loopback Up command , it puts itself in li ne loo pback and lights the front panel T e st LED . The remote unit rema ins in ...

  • Paradyne 8779 - page 86

    8. Test ing 8-8 May 2002 8700-A2- GB20-40 Send and Monit or 511 The S end and M onitor 5 11 test causes the loca l and rem ote units t o sen d a 511 test pattern to each other. Th e front panel T es t LEDs of both units are on during the test. The durat i on and re sults of the test are displ ayed o n the Network T est screen of the initiating unit ...

  • Paradyne 8779 - page 87

    8. Test ing 8700-A 2-GB20-40 May 200 2 8-9 De v ice T e sts The De vice T es ts br anch is only used to access the card-lev el t e st, the Lamp T est. T o ac cess the Dev ice T ests screen, f ollow this menu selection sequence: Ma in Menu → Te s t → De vice T ests Lam p T est The Lamp T est deter m ine s whether all LEDs are l i ghting and fun ...

  • Paradyne 8779 - page 88

    8. Test ing 8-10 May 2002 8700-A2- GB20-40 Ending an Active T est Except f or the Remote Sen d Line Loopback, a test initi a ted b y the user can be ended b y the user with the f ollowing method s: T es t Ti me ou t op ti on – E nable the T est Timeout system o ption so the u nit can automatically ter minate te sts, a nd set the T est Duration (m ...

  • Paradyne 8779 - page 89

    8. Test ing 8700-A 2-GB20-40 May 200 2 8-11 T e lc o-I n i tia te d T es ts Hotwire 8777 T er m ination Units suppor t T el co-initiated tests, as s h own in t h e f ol lo wing table. T e lco-Init iated L ine Loopback Hotwire 8777 T er m ination Units suppor t line l o opback, as specified in A T &T TR 54016, A T&T TR 6241 1, and ANS I T1.4 ...

  • Paradyne 8779 - page 90

    8. Test ing 8-12 May 2002 8700-A2- GB20-40 T e lco-Init iated Re mote Lin e Loopback If Remote T el co Loopback is enabled, a T elco-Initiated Line Loopback l o ops received data at the remote unit and passes it back t o t he T elco through the local unit. The f ollowing figure shows t he dat a flow f or a remote T elco-in itiated pa ylo ad loopbac ...

  • Paradyne 8779 - page 91

    8700-A 2-GB20-40 May 200 2 9-1 9 T ransferring Firmwar e an d Config u rations Us ing TFT P Downl oadi n g Firmwar e The Download Code screen allows you to download f irmware from a T FTP s erver or MCP Flash File System (FFS). T o ac cess the Download Code screen, f ollow this menu s elec tion seq uence: Ma in Menu → Control → Do wn load Code ...

  • Paradyne 8779 - page 92

    9. Tran sferrin g Fir mwa re and Conf i gurations Using TFTP 9-2 May 2002 8700-A2- GB20-40 Proced ure T o download firm ware: 1. P o sition the cursor in the Image File Name field. T ype the name of the file t o be downloaded. The file name must be a regular path name expression of di re ctor y nam es separated b y a forw a rd slash (/) ending wi t ...

  • Paradyne 8779 - page 93

    9. Tr ansferri ng Firmwar e and Co nfigurat i ons Using T FTP 8700-A 2-GB20-40 May 200 2 9-3 Proced ure T o appl y the downloaded fir mware: 1. Press the Escape ke y to return to t he Control me nu. Select Apply Do wnl oad. 2. On th e Appl y Download screen, type Y es to res et the card a nd activate the code. Selecting Y es causes the ter mi natio ...

  • Paradyne 8779 - page 94

    9. Tran sferrin g Fir mwa re and Conf i gurations Using TFTP 9-4 May 2002 8700-A2- GB20-40 Conf i guration Loade r The Conf iguration Load er sc reen allows y ou to upload configurations to and download c onfigurations from a TFTP ser ver or the M CP F FS. T o a ccess the Configuration Loader screen, f ol low this m enu select ion sequence: Ma in M ...

  • Paradyne 8779 - page 95

    9. Tr ansferri ng Firmwar e and Co nfigurat i ons Using T FTP 8700-A 2-GB20-40 May 200 2 9-5 2. P o sition the cursor in the TFT P Server IP Add ress field. Enter the TFT P server IP add ress or M1 fo r t h e M C P F F S . The first t h ree digits of the I P address cannot be 000 or greater t ha n 223. 3. P o sition the cursor in the TFTP T ransfer ...

  • Paradyne 8779 - page 96

    9. Tran sferrin g Fir mwa re and Conf i gurations Using TFTP 9-6 May 2002 8700-A2- GB20-40 ...

  • Paradyne 8779 - page 97

    8700-A 2-GB20-40 May 200 2 A-1 A Config u ratio n O ptio ns Ov erv iew The tabl e s in this appendix summar ize the configuration options access ed when you select Currrent Configuration on the Ma in Menu. The conf iguration options are arranged into groups based upon functionality . S el ec t . . . T o Ac ce s s th e . . . T o C on figu re t he . ...

  • Paradyne 8779 - page 98

    A. Co nfigurat ion Opti ons A-2 May 2002 8700-A2- GB20-40 NO TE: All changes to configuration options must be s aved. Ref er to Sav i ng Configuration Options in Chapter 3 , Initial S tar tup and Configu ration . Ne two rk In te rfac e Opt ions Menu F or Network I nterf ace Options, ref er to T able A-1, Networ k Inte rf ace Options . T o access th ...

  • Paradyne 8779 - page 99

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-3 Excessive Err or Rate Threshold P ossib le Set tings: 1E – 4 , 1E – 5 , 1E – 6 , 1E – 7 , 1E – 8 , 1E – 9 Defa ult Setting: 1E – 6 Determines th e err or r ate at which an e xcessi v e error rat e (EER) condi tion is rec ogni zed. The rate i s the ratio of the number of CRC err ...

  • Paradyne 8779 - page 100

    A. Co nfigurat ion Opti ons A-4 May 2002 8700-A2- GB20-40 EIA-530 P ayl oad Rate P o ssib le Setting s (Model 8777): 64, 128, 256, 384, 512, 768, 1024, 1536 Defa ult Setting: 1536 P o ssib le Setting s (M odel 8779): 64, 128, 192, 256, 320, 384, 448 , 512, 576, 640, 768, 960, 10 24, 15 36, 1920, 1984, 2048 Defa ult Setting: 2048 Specifies the sync ...

  • Paradyne 8779 - page 101

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-5 T able A-2, P a yload Rat es and DSL Line Rates for Model 87 77 , and Ta b l e A - 3 , P a yload Ra tes and DSL Line Rates for G.703 , provide the max imum payload rates achie v ab le fo r each DSL line rat e and the number of time slots required to achie v e that pa yload rate. F or G.703, ...

  • Paradyne 8779 - page 102

    A. Co nfigurat ion Opti ons A-6 May 2002 8700-A2- GB20-40 T abl e A-3. P ay load Rates and DSL Line Rates f or G.703 DS L L i ne R ate (Kbps) Vo i c e M o d e G.703-to- G .703 Da ta Mode G.703-to -G.703 Data Mode G. 703-to-EIA-530- A Pay load Rate (Kbps) Time Slots P ayloa d Rate (K b ps) Tim e Slots P o ssibl e Pa yload Rate (K b ps)* Time Slots 2 ...

  • Paradyne 8779 - page 103

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-7 DSX-1 Inte r face O ption s ( Mod el 877 7) F or t he Model 877 7 ’ s DS X-1 Interf ace Options, refer to T ab le A-4, DSX-1 In terf a c e Options – Mod el 8777 . T o access the DSX-1 Interf ace Opt ions sc reen, f ollow this menu select ion s equen ce: Ma in Menu → Configuration → C ...

  • Paradyne 8779 - page 104

    A. Co nfigurat ion Opti ons A-8 May 2002 8700-A2- GB20-40 Line Fr aming P ossib le Set tings: ESF , D4 Defa ult Setting: ESF Specifies the fr am i ng f ormat to be used by t he DS X-1 i nter f ace. Line F rami ng is only av ailab le when the unit is confi gured as an L TU. The NTU is automati cally conf i gured to match the fr a ming f or mat used ...

  • Paradyne 8779 - page 105

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-9 G.7 03 Inte rfa ce Opt ions (Mod el 8779 ) F or the Model 8779 ’ s G.703 Interf ace Opt ions, ref er to T able A-5, G.703 Interf a ce Options – Mod el 8779 . T o access the G.703 Interf ac e Options screen , f ol low this menu select ion s equen ce: Ma in Menu → Configuration → Curre ...

  • Paradyne 8779 - page 106

    A. Co nfigurat ion Opti ons A-10 May 2002 8700-A2- GB20-40 Framing P ossib le Set tings: Framed, Unf ramed Defa ult Setting: Framed Specifies whether G.704 framin g is used f or t he G.70 3 inter face. Framed – The uni t con forms to G. 704 fr am i ng fo r mat, using t ime sl ot 0. Unframed – G.704 fram i ng is disab led. When select ed, the po ...

  • Paradyne 8779 - page 107

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-11 Primary Cl ock Source P ossib le Set tings: In ter n al, G .70 3 Defa ult Setting: Int er na l Determines the primary c loc k source fo r the unit i n Bypas s mode . Primary Clock Sour ce is a v aila ble onl y whe n the unit is confi gure d as an L TU . When config ured as an NTU , t he clo ...

  • Paradyne 8779 - page 108

    A. Co nfigurat ion Opti ons A-12 May 2002 8700-A2- GB20-40 Copy Ports O pti ons Y ou can copy t he conf iguration options of one DSX-1 or G.703 interf ace, or DSL loop to a noth er using t he Copy P or ts screen. F or Copy P or t s o ptions, refer to T able A-6, Copy Por t Options . T o access the Copy P or t s screen, foll ow thi s me n u selectio ...

  • Paradyne 8779 - page 109

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-13 System Op ti ons F or System Opti o ns, refer to T ab l e A-7, Syst e m Opti o n s . T o a c ce ss the Syste m Options scre en, f ollow this menu selection sequence: Ma in Menu → Configuration → Current Configuration → Sys tem Options T able A-7. System O ptions (1 of 2) DSL Mode P os ...

  • Paradyne 8779 - page 110

    A. Co nfigurat ion Opti ons A-14 May 2002 8700-A2- GB20-40 T e s t D u ra ti o n (m in ) P ossib le Set tings: 1 – 120 Defa ult Setting: 10 Number of minu tes f or a test to be a ctiv e be fore automatica lly endi ng. T est Durat ion (min) opti on appear s when T est Ti meout i s enabled. 1 – 120 – Amount of time in minut es f or a te st t o ...

  • Paradyne 8779 - page 111

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-15 System Cl oc k The P rimar y and Sec ondar y System Clock References dete rmin e the clock used by por ts in a cross-connec t configuration. F or System Clock configuration options, ref er to T a b l e A -8, System Clock O ptions . T o acce ss the S ystem Cl o ck screen, f ol low this m enu ...

  • Paradyne 8779 - page 112

    A. Co nfigurat ion Opti ons A-16 May 2002 8700-A2- GB20-40 When a s ystem clo ck source fai l s or i s misc onfigured, a n a larm is repor ted. Secondar y c lock f ail ures are not repor te d unless the prim ar y clock has also f ai led. When t he pr imar y c lock f ails, clocking is s witched to t he second ar y clock source, if av ailable. I f a ...

  • Paradyne 8779 - page 113

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-17 Figur e A-2. Syste m Clock Confi guration Exampl es G.703 P or t 1 G.703 P or t 2 G.703 P or t 3 G.703 P or t 4 G.703 P or t 5 G.703 P or t 6 G.703 P or t 7 G.703 P or t 8 Stratum 1 Cloc k* DS1 Bypass DS1 Bypass DS0 or DS1 Cross Connect Stratum 3 Cloc k* * Must be traceab le to the same clo ...

  • Paradyne 8779 - page 114

    A. Co nfigurat ion Opti ons A-18 May 2002 8700-A2- GB20-40 T abl e A-8. System Clock Options Primary System Cloc k Reference P ossib le Set tings (L TU , Model 8777): DSX-1 P ort 1, DSX-1 P ort 2, DSX-1 P ort 3, DSX-1 P ort 4, DSX-1 P ort 5, D SX-1 Port 6, D SX-1 P ort 7, D SX-1 Port 8, Interna l Defa ult Setting: Int er na l P ossib le Set tings ( ...

  • Paradyne 8779 - page 115

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-19 Cr oss-Connect F or Cross-Connect configuration o ptions, refe r to T ab l e A-10, C ross-Connect Mode Opt ions – M odel 8779 . T o acc ess the Cross -Connect sc reen, follow this menu select ion s equen ce: Ma in Menu → Configuration → Current Configuration → Cross-Conne ct Sel ect ...

  • Paradyne 8779 - page 116

    A. Co nfigurat ion Opti ons A-20 May 2002 8700-A2- GB20-40 Set ting Cros s-Connect M ode F or Cross-Connect Mode c onfiguration options f or Mode l 8777 , refer t o T able A-9, Cross-Connect Mode Opt ions – Mod el 8777 . For Cross-Connec t Mode configuration o ptions for Model 877 9, ref er to T ab le A-10, Cross -Connect M ode Options – Model ...

  • Paradyne 8779 - page 117

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-21 The followi ng screen i s displ a y ed for Mode l 8779: If an y por t Mod e is DS0 Cr o ss-conne ct, select Assign_DS0 s f o r the A ss ign Time Slots screen to be displa yed. Select Clear_All to change the Mode of all enabl ed por ts to DS0 Cro ss-Conn ect. All DSL por t numbers and t ime ...

  • Paradyne 8779 - page 118

    A. Co nfigurat ion Opti ons A-22 May 2002 8700-A2- GB20-40 T able A-9. Cross-Connect Mode O ptions – Model 8777 Cross- Connect Mod e P ossib le Set tings: DS1 Bypass, DS1 Cr oss-connect , DS0 Cross- connect, Unassigned, Disable d Defa ult Setting: DS1 Bypass Determines th e cros s-connec t mode f or the port. DS1 Bypass – The entir e DSX-1 in t ...

  • Paradyne 8779 - page 119

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-23 T able A-10. Cro ss-Connect Mode O ptions – Model 8779 Source P ossib le Set tings: DSL, G. 703 Selects a ref erence fo r how cross -co nnecti on in formation is displ ay ed. The v al ues in the Mode c olumn ref er t o the ports entered a s the source . DSL – The DSL por t configu ratio ...

  • Paradyne 8779 - page 120

    A. Co nfigurat ion Opti ons A-24 May 2002 8700-A2- GB20-40 Assigning T i me Slot s F or Assign Time Slots configuration options, ref er to T abl e A-11, Assign Ti me Slots Options . T o acce ss the Assign Time Slots screen, select Assign_DS0 s on t he Cross-Connect Mode scree n, or f ollow t hi s menu selection sequenc e: Ma in Menu → Configurati ...

  • Paradyne 8779 - page 121

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-25 The followi ng screen i s displayed f or a DSL por t on a DSX -1 unit: Select Clear_All to clear al l time slot assignments f or th e por t. F or an e xample showing how to configure the cross-connection system, see Chapter 4 , Cross-Connecting P or t s . Ref er to T able A-11, Assign Time ...

  • Paradyne 8779 - page 122

    A. Co nfigurat ion Opti ons A-26 May 2002 8700-A2- GB20-40 T abl e A-11. Assign T ime Slots O ption s (1 of 2) DSX-1/DSL or G.703 /DSL P o ssib le Setting s (M odel 8777): DSX-1, DSL Defa ult Setting: DSX-1 P o ssib le Setting s (M odel 8779): G.703, DSL Defa ult Setting: G.703 Determines th e port for whi ch time slots are di splay ed. The uni t c ...

  • Paradyne 8779 - page 123

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-27 Start TS P o ssib le Setting s (M odel 8777): 1 – 24 Defa ult Setting: [Bl ank] P o ssib le Setting s (M odel 8779): 1 – 31 Defa ult Setting: [Bl ank] Specifi es the t ime sl ot where ti me slo t assignme nt i s to begi n in the conti guou s time sl ots specif ied in the DS0 s to Al loc ...

  • Paradyne 8779 - page 124

    A. Co nfigurat ion Opti ons A-28 May 2002 8700-A2- GB20-40 Manag ement a nd Comm unication O ptions Menu The Manage men t and Communication Menu allows you to access the f ol lowing: T el net Session Options ( T able A-12 ) General SNM P Managem ent Options ( Ta b l e A - 1 3 ) SNMP N MS Securi ty Opti ons ( Ta b l e A - 1 4 ) SNMP T raps O ptions ...

  • Paradyne 8779 - page 125

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-29 T able A-1 2. T elnet Session Options T elnet Session P ossib le Set tings: Enabl e , Disab le Defa ult Setting: Enabl e Specifies if t he uni t wi ll resp ond to a T e lnet sessi on requ est from a T elnet cl ien t on an inter conn ected IP network. Enable – A llo ws T elnet s ession s b ...

  • Paradyne 8779 - page 126

    A. Co nfigurat ion Opti ons A-30 May 2002 8700-A2- GB20-40 Genera l SNMP Man agement Opti ons T o ac ces s the General SNMP Ma nagem ent Options screen, follo w th is menu selection sequence: Ma in Menu → Configuration → Current Configuration → Managem ent a nd C ommunicat ion → SNMP The Community Name and Nam e Access config uration option ...

  • Paradyne 8779 - page 127

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-31 Communi ty Name 1 P ossib le Set tings: ASCII text fi eld De faul t T ext: public Identi f ies the name of the communi ty allo wed to acces s the uni t ’ s MIB. The communit y name m ust be supplie d by an e xternal SNM P manag er when that manag er at tempts to access an obj ect in the M ...

  • Paradyne 8779 - page 128

    A. Co nfigurat ion Opti ons A-32 May 2002 8700-A2- GB20-40 SNMP NMS Se c urity O ptions T o acc ess the SNMP N MS Security O ptions s creen, follow this m enu selection sequence: Ma in Menu → Configuration → Current Configuration → Managem ent a nd C ommunicat ion → Security main/config/management/security Slot: 4 Model: 87xx SNMP NMS SECUR ...

  • Paradyne 8779 - page 129

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-33 T able A-14. SNMP NM S Se curity Opti ons NMS IP V ali dat ion P ossib le Set tings: Enabl e , Disab le Defa ult Setting: Disab le Specifies whe ther secu r it y chec king is per formed on the IP addr ess of SNMP management syst ems attempt ing to access t he node. Enable – S ecurity chec ...

  • Paradyne 8779 - page 130

    A. Co nfigurat ion Opti ons A-34 May 2002 8700-A2- GB20-40 SNMP T raps Options An SNM P trap can be automa tically sent ou t through the E OC or t he Managem ent por t to the SNMP ma nager when the unit detects con ditions set by the user . These traps enab l e the SNMP man ager to gauge the state of t h e networ k. Refer t o Appendi x B, Standards ...

  • Paradyne 8779 - page 131

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-35 T abl e A-15. SNMP T raps Options (1 of 2) SNMP T raps P ossib le Set tings: Enabl e , Disab le Defa ult Setting: Disab le Control s the gener at ion of SNMP trap message s. Enable – SNMP tra p mes sages are sent out to SNMP manage rs. Disabl e – No SNMP tr ap me ssag es are sent out. N ...

  • Paradyne 8779 - page 132

    A. Co nfigurat ion Opti ons A-36 May 2002 8700-A2- GB20-40 Ge ne ra l T rap s P ossib le Set tings: Dis a b le, Wa r m, Au thFa il, Bot h Defa ult Setting: Both Determines which SNMP tr aps are sent to each tr ap mana ger . Disabl e – No general tr a p mes sages are sent . Wa r m – Sends trap message f or warmStart ev ents. Au t h Fa il – Sen ...

  • Paradyne 8779 - page 133

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-37 Inband Management Channel ( Model 8779) T o ac ces s the Inband Man agem ent Channel scree n, f ollow this menu selection sequence: Ma in Menu → Configuration → Current Configuration → Managem ent a nd C ommunicat ion → Inban d Manag eme nt Chann el NO TE: Inband Managem ent Channel ...

  • Paradyne 8779 - page 134

    A. Co nfigurat ion Opti ons A-38 May 2002 8700-A2- GB20-40 T able A-1 6. Inband Ma nag emen t Channel Options – Mode l 8779 Inband Mana gement Sel ect P ossib le Set tings: Enabl e , Disab le Defa ult Setting: Disab le Specifies whether dat a on the select ed por t a nd time s lot wi ll b e sent accor di ng t o the cross- connect co nfi gurati on ...

  • Paradyne 8779 - page 135

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-39 Conf iguring and T e s ting Inband M anage me nt The M odel 877 9 T erminat ion Unit a llows you to s et up remot e inband managem ent using one of the DS0 channels as the manage men t channel to tra n s p o r t S N MP tr a f fic to the M C P c a r d . Proced ure T o s et up inband man agem ...

  • Paradyne 8779 - page 136

    A. Co nfigurat ion Opti ons A-40 May 2002 8700-A2- GB20-40 The Cross Connec t Mode s creen a ppears. 5. Configure th e G.70 3 p or t to be used for Inban d Manag eme nt to DS 0 Cross-connec t and sav e y o ur chan ges. 6. Use the I n band Ma nagem ent Channel screen on the 8779 unit to configure Inband Managem ent. F ro m the 8779 unit, f ollow thi ...

  • Paradyne 8779 - page 137

    A. Configura tion Option s 8700-A 2-GB20-40 May 200 2 A-41 7. Set Inband Manage men t Select to Enable , and enter the por t (1) and time slot (1) to s u ppor t Inband Man agem ent. Save your changes. 8. Use the As sign Tim e Slots s creen to ver ify that Inband Ma nagement has be en assigned to P or t 1 TS 1 . F oll ow this menu sel ection sequ en ...

  • Paradyne 8779 - page 138

    A. Co nfigurat ion Opti ons A-42 May 2002 8700-A2- GB20-40 3. P e rf orm t he follo wi ng: — F rom the upstrea m router , ping th e MCP m anagement IP add ress. Record the pi ng re sponse tim e. — F rom the manage men t platf or m , ping the MCP managem ent addres s. Record the ping response time. — F rom the manage men t platf or m , T elnet ...

  • Paradyne 8779 - page 139

    8700-A 2-GB20-40 May 200 2 B-1 B Standards Compliance f o r SNM P T raps SNMP T r aps This section descr ibe s the unit ’ s com pliance wi th S NMP standards an d any special operational f eatu res f or the SNM P traps suppor ted. The unit suppor t s the f ol lo wing traps: war m S ta r t on pag e B-2 authenticat ionF a ilure on page B-2 linkUp a ...

  • Paradyne 8779 - page 140

    B. St andards Com pliance for SNMP Traps B-2 May 2002 8700-A2- GB20-40 F or a unit defined as an NTU runn ing IP Co nser vativ e software, all traps ha ve at a minimum a v ar iable binding of the Super Overloaded ifIndex (SOI ). The formula fo r t h e S O I i s : ( (L TU Slot Number) * 1,00 0,00 0) + ((L TU DSL P o r t Number) * 1,000) + the NT U ? ...

  • Paradyne 8779 - page 141

    B. St andards Co mp liance for SNMP Traps 8700-A 2-GB20-40 May 200 2 B-3 The following list descr ibes the condi tions t hat de fine linkUp and linkDown: linkUp/Down variable bindings ifIn dex ( RFC 286 3 (wa s 1573) ) This obj ect pro vides the ind ex into t he ifT able an d poten ti ally into tab les in oth er MIBs . The ifIn de x es supported ar ...

  • Paradyne 8779 - page 142

    B. St andards Com pliance for SNMP Traps B-4 May 2002 8700-A2- GB20-40 En terp rise- Specif ic T raps The ent er pr iseSpecific trap indicates that a n en ter prise-s pecific ev en t has occurred. The Specific-trap field identifies t he par t icular trap t hat occu rred. The f ollowing table list s th e enter p rise-s pecific traps suppor t ed by t ...

  • Paradyne 8779 - page 143

    B. St andards Co mp liance for SNMP Traps 8700-A 2-GB20-40 May 200 2 B-5 enterpriseF all back A utoR ate(1 3) After a loss of sig nal, th e unit r esyn chroni zed to a low er rate than t he last know n r ate. V ariabl e bi ndings: ifInde x ( RFC 2863) ifA d min Sta t us (RFC 2863) ifOper St atus (RFC 2863) ifT ype (RFC 2863) V ariabl e l ine condit ...

  • Paradyne 8779 - page 144

    B. St andards Com pliance for SNMP Traps B-6 May 2002 8700-A2- GB20-40 The tests that aff ect the enter priseT estStar t and ent er pri se T estStop traps and the vari able bi ndings depend on the interf ace. The specific tests and variab le bindings are des cribe d in t he follo wing table. Int er fa ce ente rpr ise T est Star t/St op variable bi ...

  • Paradyne 8779 - page 145

    8700-A 2-GB20-40 May 200 2 C-1 C Connecto r Pin Assi gn ment s Ov erv iew This section lists the pin assignm ents f or the front pane l 50-pin DTE connec tor and the 50-pin T elco c onnect ors on the rear of t he DS LA M chassis. Front Panel 5 0-pin DT E Conn ector P inouts The DTE connectors on the termination unit pro vi de the 4-wire DSX-1 or G. ...

  • Paradyne 8779 - page 146

    C. Co nnector Pin Assi gnments C-2 May 2002 8700-A2- GB20-40 P o r t 4 36 Data Out (Rin g) 11 D at a Ou t (T ip ) 35 D at a In (T ip) 10 D ata In (Ri ng) P o r t 5 39 Data Out (Rin g) 14 D at a Ou t (T ip ) 38 D at a In (T ip) 13 D ata In (Ri ng) Por t 6 42 D ata Out (Rin g) 17 D at a Ou t (T ip ) 41 D at a In (T ip) 16 D ata In (Ri ng) P o r t 7 4 ...

  • Paradyne 8779 - page 147

    C. Connecto r Pin Assig nments 8700-A 2-GB20-40 May 200 2 C-3 8610/ 862 0 and 881 0/8820 DSL AM T el c o 50-pi n Conne cto r Pino uts The T e lco 50-pin connecto rs on the rear of the DSLAM chassis (numbered 1 – 3 in the 8610/8620 DSL AMs and 1 – 18 in the 8810/8820 DSL AMs) provide the 2-wir e loop interface from each DS L por t to either the ...

  • Paradyne 8779 - page 148

    C. Co nnector Pin Assi gnments C-4 May 2002 8700-A2- GB20-40 ...

  • Paradyne 8779 - page 149

    8700-A 2-GB20-40 May 200 2 D-1 D T echnical Specif i cations T abl e D-1. T echnic al Specif ica tion s f or the Hotwir e 8777 and 8779 TDM SDSL T e rminati on Unit Speci fic ation s C rit eria* Size Length: 25.4 cm (10 i nches) Height: 31.1 cm ( 12.3 in ches) Width: 2.0 cm (0.8 i nch) We i g h t Appro ximately 0. 56 kg (1.24 lbs .) Appro vals Safe ...

  • Paradyne 8779 - page 150

    D. Te chnical Specif i cations D-2 May 2002 8700-A2- GB20-40 ...

  • Paradyne 8779 - page 151

    8700-A 2-GB20-40 May 200 2 E-1 E Cr oss-Connection W orksheets Us ing t he W o rks he e ts The f ollowing worksheet s are designed to help plan, visualize , and co nfigure a cross-conne ction. Time slot assignmen t works heets are supplied to represent a connection from the v ie wp oint of the DSX-1 or G .703 p or ts, or the assoc iated DSL por ts. ...

  • Paradyne 8779 - page 152

    E. Cr oss-Connect ion Wor ksheets E-2 May 2002 8700-A2- GB20-40 P ort Co nnect ion Diagr am Select V oice and/or Data f or each por t . Dra w lines to show the c o nnection of DSX-1 or G.703 por t s to DSL por t s and mar k each connect ions as one of: DS1 Bypas s DS0 Cross-Conne ct DS1 Cross-Conne ct See D eter m ining the Configu ration in Chapte ...

  • Paradyne 8779 - page 153

    E. Cros s-Connecti on W orksh eets 8700-A 2-GB20-40 May 200 2 E-3 DSX-1 Time Slot Assignments Fill in t he por t number and time slot cross-conn ection and data/voice mode f or each time slot. Then tr a nsfer the entri es to the Assign Time Slots screen. T ime Slot Assignm ents – D SX-1 Port 1 T ime Slot Assignm ents – D SX-1 Port 2 TS01 Po r t ...

  • Paradyne 8779 - page 154

    E. Cr oss-Connect ion Wor ksheets E-4 May 2002 8700-A2- GB20-40 T ime Slot Assignm ents – D SX-1 Port 3 T ime Slot Assignm ents – D SX-1 Port 4 TS01 Po r t T y p e (D = DSL ( X = DSX-1) P or t Number (1 – 8) Time S lot (1 – 24 ) d (Dat a) or v (V oice) TS01 TS02 T S03 TS 04 TS05 T S06 TS07 DDDDDDD TS08 TS09 T S10 TS 11 TS12 T S13 TS14 DDDDD ...

  • Paradyne 8779 - page 155

    E. Cros s-Connecti on W orksh eets 8700-A 2-GB20-40 May 200 2 E-5 T ime Slot Assignm ents – D SX-1 Port 5 T ime Slot Assignm ents – D SX-1 Port 6 TS01 Po r t T y p e (D = DSL ( X = DSX-1) P or t Number (1 – 8) Time S lot (1 – 24 ) d (Dat a) or v (V oice) TS01 TS02 T S03 TS 04 TS05 T S06 TS07 DDDDDDD TS08 TS09 T S10 TS 11 TS12 T S13 TS14 DDD ...

  • Paradyne 8779 - page 156

    E. Cr oss-Connect ion Wor ksheets E-6 May 2002 8700-A2- GB20-40 T ime Slot Assignm ents – D SX-1 Port 7 T ime Slot Assignm ents – D SX-1 Port 8 TS01 Po r t T y p e (D = DSL ( X = DSX-1) P or t Number (1 – 8) Time S lot (1 – 24 ) d (Dat a) or v (V oice) TS01 TS02 T S03 TS 04 TS05 T S06 TS07 DDDDDDD TS08 TS09 T S10 TS 11 TS12 T S13 TS14 DDDDD ...

  • Paradyne 8779 - page 157

    E. Cros s-Connecti on W orksh eets 8700-A 2-GB20-40 May 200 2 E-7 T ime Slot Assignm ents – DS L P or t 1 T ime Slot Assignm ents – DS L P or t 2 TS01 Po r t T y p e (D = DSL ( X = DSX-1) P or t Number (1 – 8) Time S lot (1 – 24 ) d (Dat a) or v (V oice) TS01 TS02 T S03 TS 04 TS05 T S06 TS07 XXXXXXX TS08 TS09 T S10 TS 11 TS12 T S13 TS14 XXX ...

  • Paradyne 8779 - page 158

    E. Cr oss-Connect ion Wor ksheets E-8 May 2002 8700-A2- GB20-40 T ime Slot Assignm ents – DS L P or t 3 T ime Slot Assignm ents – DS L P or t 4 TS01 Po r t T y p e (D = DSL ( X = DSX-1) P or t Number (1 – 8) Time S lot (1 – 24 ) d (Dat a) or v (V oice) TS01 TS02 T S03 TS 04 TS05 T S06 TS07 XXXXXXX TS08 TS09 T S10 TS 11 TS12 T S13 TS14 XXXXX ...

  • Paradyne 8779 - page 159

    E. Cros s-Connecti on W orksh eets 8700-A 2-GB20-40 May 200 2 E-9 T ime Slot Assignm ents – DS L P or t 5 T ime Slot Assignm ents – DS L P or t 6 TS01 Po r t T y p e (D = DSL ( X = DSX-1) P or t Number (1 – 8) Time S lot (1 – 24 ) d (Dat a) or v (V oice) TS01 TS02 T S03 TS 04 TS05 T S06 TS07 XXXXXXX TS08 TS09 T S10 TS 11 TS12 T S13 TS14 XXX ...

  • Paradyne 8779 - page 160

    E. Cr oss-Connect ion Wor ksheets E-10 May 2002 8700-A2- GB20-40 T ime Slot Assignm ents – DS L P or t 7 T ime Slot Assignm ents – DS L P or t 8 TS01 Po r t T y p e (D = DSL ( X = DSX-1) P or t Number (1 – 8) Time S lot (1 – 24 ) d (Dat a) or v (V oice) TS01 TS02 T S03 TS 04 TS05 T S06 TS07 XXXXXXX TS08 TS09 T S10 TS 11 TS12 T S13 TS14 XXXX ...

  • Paradyne 8779 - page 161

    E. Cros s-Connecti on W orksh eets 8700-A 2-GB20-40 May 200 2 E-11 G.703 Time Slot Assignme nts Fill in t he por t number and time slot cross-conn ection and data/voice mode f or each time slot. Then tr a nsfer the entri es to the Assign Time Slots screen. T ime Slot Assignm ents – G.703 Port 1 * NO TE: When a G.703 por t is c o nfigured for C ha ...

  • Paradyne 8779 - page 162

    E. Cr oss-Connect ion Wor ksheets E-12 May 2002 8700-A2- GB20-40 T ime Slot Assignm ents – G.703 Port 2 * NO TE: When a G.703 por t is c o nfigured for C AS, Time Slot 16 is u se d f or signaling and is u navai l able f or c ross-conn ection. When a G.703 por t is c o nfigured for C CS in a DS0 Cross Connect, the user must cros s-connect Time Slo ...

  • Paradyne 8779 - page 163

    E. Cros s-Connecti on W orksh eets 8700-A 2-GB20-40 May 200 2 E-13 T ime Slot Assignm ents – G.703 Port 3 * NO TE: When a G.703 por t is c o nfigured for C AS, Time Slot 16 is u se d f or signaling and is u navai l able f or c ross-conn ection. When a G.703 por t is c o nfigured for C CS in a DS0 Cross Connect, the user must cros s-connect Time S ...

  • Paradyne 8779 - page 164

    E. Cr oss-Connect ion Wor ksheets E-14 May 2002 8700-A2- GB20-40 T ime Slot Assignm ents – G.703 Port 4 * NO TE: When a G.703 por t is c o nfigured for C AS, Time Slot 16 is u se d f or signaling and is u navai l able f or c ross-conn ection. When a G.703 por t is c o nfigured for C CS in a DS0 Cross Connect, the user must cros s-connect Time Slo ...

  • Paradyne 8779 - page 165

    E. Cros s-Connecti on W orksh eets 8700-A 2-GB20-40 May 200 2 E-15 T ime Slot Assignm ents – G.703 Port 5 * NO TE: When a G.703 por t is c o nfigured for C AS, Time Slot 16 is u se d f or signaling and is u navai l able f or c ross-conn ection. When a G.703 por t is c o nfigured for C CS in a DS0 Cross Connect, the user must cros s-connect Time S ...

  • Paradyne 8779 - page 166

    E. Cr oss-Connect ion Wor ksheets E-16 May 2002 8700-A2- GB20-40 T ime Slot Assignm ents – G.703 Port 6 * NO TE: When a G.703 por t is c o nfigured for C AS, Time Slot 16 is u se d f or signaling and is u navai l able f or c ross-conn ection. When a G.703 por t is c o nfigured for C CS in a DS0 Cross Connect, the user must cros s-connect Time Slo ...

  • Paradyne 8779 - page 167

    E. Cros s-Connecti on W orksh eets 8700-A 2-GB20-40 May 200 2 E-17 T ime Slot Assignm ents – G.703 Port 7 * NO TE: When a G.703 por t is c o nfigured for C AS, Time Slot 16 is u se d f or signaling and is u navai l able f or c ross-conn ection. When a G.703 por t is c o nfigured for C CS in a DS0 Cross Connect, the user must cros s-connect Time S ...

  • Paradyne 8779 - page 168

    E. Cr oss-Connect ion Wor ksheets E-18 May 2002 8700-A2- GB20-40 T ime Slot Assignm ents – G.703 Port 8 * NO TE: When a G.703 por t is c o nfigured for C AS, Time Slot 16 is u se d f or signaling and is u navai l able f or c ross-conn ection. When a G.703 por t is c o nfigured for C CS in a DS0 Cross Connect, the user must cros s-connect Time Slo ...

  • Paradyne 8779 - page 169

    E. Cros s-Connecti on W orksh eets 8700-A 2-GB20-40 May 200 2 E-19 T ime Slot Assignm ents – DS L P or t 1 TS01 Po r t T y p e (D = DSL ( G = G.703) P or t Number (1 – 8) Time S lot (1 – 31 ) d (Dat a) or v (V oice) TS01 TS02 T S03 TS 04 TS05 T S06 TS07 GGGGGGG TS08 TS09 T S10 TS 11 TS12 T S13 TS14 GGGGGGG TS15 TS16 T S17 TS 18 TS19 T S20 TS2 ...

  • Paradyne 8779 - page 170

    E. Cr oss-Connect ion Wor ksheets E-20 May 2002 8700-A2- GB20-40 T ime Slot Assignm ents – DS L P or t 2 TS01 Po r t T y p e (D = DSL ( G = G.703) P or t Number (1 – 8) Time S lot (1 – 31 ) d (Dat a) or v (V oice) TS01 TS02 T S03 TS 04 TS05 T S06 TS07 GGGGGGG TS08 TS09 T S10 TS 11 TS12 T S13 TS14 GGGGGGG TS15 TS16 T S17 TS 18 TS19 T S20 TS21 ...

  • Paradyne 8779 - page 171

    E. Cros s-Connecti on W orksh eets 8700-A 2-GB20-40 May 200 2 E-21 T ime Slot Assignm ents – DS L P or t 3 TS01 Po r t T y p e (D = DSL ( G = G.703) P or t Number (1 – 8) Time S lot (1 – 31 ) d (Dat a) or v (V oice) TS01 TS02 T S03 TS 04 TS05 T S06 TS07 GGGGGGG TS08 TS09 T S10 TS 11 TS12 T S13 TS14 GGGGGGG TS15 TS16 T S17 TS 18 TS19 T S20 TS2 ...

  • Paradyne 8779 - page 172

    E. Cr oss-Connect ion Wor ksheets E-22 May 2002 8700-A2- GB20-40 T ime Slot Assignm ents – DS L P or t 4 TS01 Po r t T y p e (D = DSL ( G = G.703) P or t Number (1 – 8) Time S lot (1 – 31 ) d (Dat a) or v (V oice) TS01 TS02 T S03 TS 04 TS05 T S06 TS07 GGGGGGG TS08 TS09 T S10 TS 11 TS12 T S13 TS14 GGGGGGG TS15 TS16 T S17 TS 18 TS19 T S20 TS21 ...

  • Paradyne 8779 - page 173

    E. Cros s-Connecti on W orksh eets 8700-A 2-GB20-40 May 200 2 E-23 T ime Slot Assignm ents – DS L P or t 5 TS01 Po r t T y p e (D = DSL ( G = G.703) P or t Number (1 – 8) Time S lot (1 – 31 ) d (Dat a) or v (V oice) TS01 TS02 T S03 TS 04 TS05 T S06 TS07 GGGGGGG TS08 TS09 T S10 TS 11 TS12 T S13 TS14 GGGGGGG TS15 TS16 T S17 TS 18 TS19 T S20 TS2 ...

  • Paradyne 8779 - page 174

    E. Cr oss-Connect ion Wor ksheets E-24 May 2002 8700-A2- GB20-40 T ime Slot Assignm ents – DS L P or t 6 TS01 Po r t T y p e (D = DSL ( G = G.703) P or t Number (1 – 8) Time S lot (1 – 31 ) d (Dat a) or v (V oice) TS01 TS02 T S03 TS 04 TS05 T S06 TS07 GGGGGGG TS08 TS09 T S10 TS 11 TS12 T S13 TS14 GGGGGGG TS15 TS16 T S17 TS 18 TS19 T S20 TS21 ...

  • Paradyne 8779 - page 175

    E. Cros s-Connecti on W orksh eets 8700-A 2-GB20-40 May 200 2 E-25 T ime Slot Assignm ents – DS L P or t 7 TS01 Po r t T y p e (D = DSL ( G = G.703) P or t Number (1 – 8) Time S lot (1 – 31 ) d (Dat a) or v (V oice) TS01 TS02 T S03 TS 04 TS05 T S06 TS07 GGGGGGG TS08 TS09 T S10 TS 11 TS12 T S13 TS14 GGGGGGG TS15 TS16 T S17 TS 18 TS19 T S20 TS2 ...

  • Paradyne 8779 - page 176

    E. Cr oss-Connect ion Wor ksheets E-26 May 2002 8700-A2- GB20-40 T ime Slot Assignm ents – DS L P or t 8 TS01 Po r t T y p e (D = DSL ( G = G.703) P or t Number (1 – 8) Time S lot (1 – 31 ) d (Dat a) or v (V oice) TS01 TS02 T S03 TS 04 TS05 T S06 TS07 GGGGGGG TS08 TS09 T S10 TS 11 TS12 T S13 TS14 GGGGGGG TS15 TS16 T S17 TS 18 TS19 T S20 TS21 ...

  • Paradyne 8779 - page 177

    8700-A 2-GB20-40 May 200 2 IN-1 Ind ex A Abort All Te sts, 8- 1 access SNMP, 6-5 to async hronous t ermi nal inter face, 2-3 access leve l eff ective, 6-2 funct ions ava il abl e for, 6- 2 admini ster login, 6-2 AIS ( Alarm In dication Signal) , statu s message, 7-3 Alar m LED, 7- 24 ASCII, pri nt able charact ers, 3-2 Assig n Time Sl ots, A-24 ATI ...

  • Paradyne 8779 - page 178

    Index IN-2 May 2002 8700-A2- GB20-40 cross -connec tion exam ple, 4 - 2 proce dures, 4-1 cust omer confi gur ation areas, 3-3 D Da ta P ath F ailu re , s e lf- tes t r es ul t, 7 - 7 data/ voice time sl ot assi gnment, A-27 defau lt conf igurati on area , 3-3 delet e login ID, 6-4 Desti nat ion, A-23 de vice mess ages, 7-10 name , 3-2 res e t, 3 - ...

  • Paradyne 8779 - page 179

    Inde x 8700-A 2-GB20-40 May 200 2 IN-3 Inban d Managem ent Channel (IBMC) Opti ons, A-37 stat us messages, 7-4 Inban d Managem ent Stat i stics , 7-20 int ended au dience, v IP a ddress exam ple, 5 - 2 sele cting, 5-1 SNMP manager , 6-5 K keyboa rd funct ion s, 2-6 L lam p t e st, 8-9 LEDs fro nt panel, 7-24 test ing, 8-9 viewi ng t hrough the ATI, ...

  • Paradyne 8779 - page 180

    Index IN-4 May 2002 8700-A2- GB20-40 P Passed, self-te st result, 7-8 patt ern test , 8-8 payl oad rate EIA-5 30, A-4 Paylo ad R ate Mi smatch status m ess age, 7-5 perf ormance sta ti st ics, 7- 13, 7- 19 DSX-1, 7-15 G.703, 7-17 Inban d Managem ent, 7-20 physi cal enviro nment requi re m ents , D-1 pin ass ignments fro nt pane l, C-1 Telco 50-pin, ...

  • Paradyne 8779 - page 181

    Inde x 8700-A 2-GB20-40 May 200 2 IN-5 ter m inal port, di rect connecti on, 2- 1 tes t abort i ng, 8-10 De vi ce T es t s , A- 3 9 DTE Loopback , 8-6 LED, 7-24 menu , 8-2 Networ k Lin e Loopbac k, 8-4 patt ern, 8 -8 proce dures, 8-1 Remote Send Li ne Loopback, 8-7 Repeate r Loopback, 8-5 Send a nd Mon i tor 51 1, 8- 8 – 8-9 stat us messages, 7-9 ...

  • Paradyne 8779 - page 182

    Index IN-6 May 2002 8700-A2- GB20-40 ...

Fabricant Paradyne Catégorie Network Router

Les documents que nous recevons du fabricant de l'appareilParadyne 8779 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Paradyne
- manuels d’utilisations 8779
- fiches produit Paradyne
- dépliants
- ou étiquettes-énergie Paradyne 8779
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Paradyne 8779.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Paradyne 8779, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Paradyne 8779. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Paradyne 8779.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Paradyne 8779, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Paradyne 8779 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Paradyne 8779.

Le manuel d’utilisation complet Paradyne, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Paradyne 8779 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Paradyne 8779, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lParadyne 8779 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Paradyne 8779 - qui devraient nous aider dans les premières étapes lors de l'utilisation Paradyne 8779
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Paradyne 8779
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Paradyne 8779 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Paradyne 8779?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Paradyne 8779, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Paradyne 8779 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)