Français dropdown-ico

Manuel d’utilisation White 1000

33 pages 1.05 mb
Télécharger

Aller à la page of 33

Summary
  • White 1000 - page 1

    INSTRUCTION MANUAL FOR SEWING MACHINE #1000 EL MANUAL DE INSTRUCCION PARA COSER MAQUINA #1000 WHITE j ...

  • White 1000 - page 2

    IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be folowed, including the following: Read all instructions before using (this appliance) DANGER To reduce the risk of electric shock: An appliance should never be left unattended when plugged in. Always unplug this appliance from the electric ou ...

  • White 1000 - page 3

    POLARIZED PLUGS CAUTION This product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, con ...

  • White 1000 - page 4

    Adjusting.thread tensions . Regulating the presser foot pressure Darning plate Fabric. Thread. Needle guide Sewing (pattern selector) and operation table To start sewing to finish a seam Straight stitch zig zag stitch Blind hemming Three step zig-zag Overcasting edges-binding Straight stretch stitch Sewinq on buttons Sewing in zips Button hole sewi ...

  • White 1000 - page 5

    NAME OF PARTS (FRONT SIDE) 1 Pattern selector dial 2 Take up lever 3 Tread tension dial 4 Tread guide for upper threading 5 Presser foot 6 Shuttle cover 7 Extension table 8 Spool pin 9 Top cover 10 Stitch length dial 11 Reverse button 12 Bobbin winder spindle 13 Bobbin winder stopper 14 Stop motion knob 15 Hand wheel 16 Handle 17 Upper thread guide ...

  • White 1000 - page 6

    ACCESSORI ES Zigzag foot (On machine) Button foot Machine Oil Zipper foot #11 #14 Bobbin Felt Button hole foot Screw driver Button hole cutter Needle 7 ...

  • White 1000 - page 7

    8 To convert the machine from flat-bed use to free-arm use simply remove the ex tension table as shown. REMOViNG EXTENSION TABLE THIS IS ONLY APPLICABLE TO MACHINES MANUFACTURED FOR THE UNITED KINGDOM IMPORT ANT The wires in this mains lead are coloured in accordance with the following code: BLUE — NEUTRAL BROWN — LIVE NOTE. A the colours of th ...

  • White 1000 - page 8

    BEFORE SEWING 1. Fit the machine pug into the machine. 2. Plug the machine to the power supply. 3. Sewing speed can be varied by the speed controller. (BE SURE TO FIT A CORRECT PLUG TO SUPPLY CORD) 1. Remove or install lamp from inside of face cover. 2. Open face cover in direction of arrow. 3. Rerncve lamp by unscrewing it counter clockwise. 4. In ...

  • White 1000 - page 9

    I FITTING SHANK AND QUILTING SEAM GUIDE Raise the presser bar and fit shank as shown. (1) Insert quilting/seam guide carefully so as not to damage the holding spring. (2) FITTING OF PRESSER FEET Raise the presser foot. Pull the one-touch lever towards you and the foot will be released. Centre new foot under shank. Lower shank until groove is direct ...

  • White 1000 - page 10

    WINDING THE BOBBIN 1. Release stop motion knob. 2. Thread as shown. 3. Place bobbin onto spindle and hand-wind thread onto bobbin in an anti-clockwise direction for 5 or 6 turns. (When bobbin is filled re-tighten stop motion knob) 4. Push bobbin winder spindle against stopper, in direction of arrow, and depress foot pedal. 5. When bobbin winding is ...

  • White 1000 - page 11

    REMOVING BOBBIN CASE AND BOBBIN 1. Raise needle to its highest 2. Open hinged latch of position and open the bobbin case and pull bob- shuttle race cover, bin case out of machine. 3. Release the latch and bob bin will fall out easily. INSERTING BOBBiN INTO BOBBIN CASE SLOT Hinged 1. Pull off 5cm of thread from bobbin and insert it into bobbin case ...

  • White 1000 - page 12

    7 INSERTING BOBBIN CASE INTO SHUTTLE RACE nse 1. Ensure needle is at its highest position. Pulling thread to the front, open the latch of bobbin case and hold it. CHANGING NEEDLE 2. Holding latch open, piace bobbin case onto centre pin in shuttle and release latch. 1. Raise needle to its highest position. 2. Loosen needle clamp screw and re move ol ...

  • White 1000 - page 13

    THREADING UPPER THREAD / / Thread the machine from A to G as illustrated. A. Through the thread guide. B. Between the tension discs. C. Up and into the tension spring. D. Into the thread take-up ever from right to left. E. Down behnd the thread guide. F. Behind the needle clamp thread guide. G. Through the needle from front to back Fig. 1 & 2 a ...

  • White 1000 - page 14

    DRAWING UP BOBBIN THREAD Hoid the top thread with a slight tension ri your left hand and rotate the hand wheel towards you so that the needle goes down and up again, then gently pull your thread out towards the rear and under your sewing foot and you are ready to start sewing. CHANGING SEWING DIRECTIONS ( I 4 1. Lower needle down into fabric and ra ...

  • White 1000 - page 15

    ADJUSTING UPPER THREAD TENSION It is only normally necessary to adjust the upper thread tension to achieve the correct balance between the upper and lower threads. The higher the number on the dial the greater the tension. Incorrect Inside of fabric Upper thread ADJUSTING LOWER THREAD TENSION Lower thread tension can be adjusted by turning the scre ...

  • White 1000 - page 16

    REGULATING THE PRESSER FOOT PRESSURE To release the pressure, push ring (A) downwards. This causes the regulator to spring up to its highest position. The material is now free from any pressure of the presser foot. For sewng thin or light materials, push regulator (B) down just a little to provide the light pressure required. If you are sewing thic ...

  • White 1000 - page 17

    FABRIC THREAD NEEDLE GUIDE Length of stitches Indica Pressure of of Fabric Thread Needle presser foot ST. ZZ. tension Pressure Stitch length regulation a t o I Nylon 80 Cotton Light Tricot 605. Fibe 11 Silk 50 silk 0.5-3 0.5-3 50S.Fibe Wool silk Silk 11 Medium 60-80 Gingham Cotton or 0.5-4 0.5—4 1 E hinJerse6QSFibe 14 5 Gabardine 50 Si ...

  • White 1000 - page 18

    I 1 1 4 SEWING (PATTERN SELECTOR) AND OPERATION TABLE Stitch Stitch Patterns Setch Length Presser Foot Drop !ecd 1 Straight Stitch • 2 ZZag B i nd Hem - • Thread step-Zigzag > j2 Stitch 3 Slant Overedge Straight Stretch Stitch 5 Button Hoie exCept 1 6 Twin Needle buttOn hce 4 Freehand Not Embroidery — . [f Necessary I 19 ...

  • White 1000 - page 19

    SEWING (PATTERN SELECTOR) AND OPERATION TABLE 20 ...

  • White 1000 - page 20

    TO START SEWING Important Hints. 1. Raise the take-up lever to its highest position when starting and stopping sewing. 2. Hold both threads about 10 cms to the rear of machine for the first two or three stitches. 3. Sufficient fabric should be placed under needle before lowering presser foot. 4. Depress foot/Speed control and start to sew. 5. Test ...

  • White 1000 - page 21

    STRAIGHT STITCH While ‘2” or “3” on the dial gives a suitable stitch length for ordinary purposes, the stitch length varies with the weight of fabric, thickness of thread and pur poses, the stitch length varies with the weight of fabric, thickness of thread and purpose of sewing. Generally speaking, the finer the fabric, the finer the threa ...

  • White 1000 - page 22

    /7 BLIND HEMMING I Fold the fabric as illustrated with the “wrong” side facing upwards.(1) I Place the folded fabric under the foot as shown. I Turn the hand wheel towards you by hand, urtil the needle swings over to the :1 far left. It should then just pierce the fold of the fabric. (2( If it does not then adjust the position of the fabric. On ...

  • White 1000 - page 23

    THREE STEP ZIG-ZAG The three step zig-zag stitch has a wide range of sewing applications, such as patching, darning, repairing tears, mending, sewing on elastic and lace, oversew ing edges etc. on a wide range of fabrics. The illustration shows patching, where the stitches are to the edge of the patch and a tear, where the stitches go firstly over ...

  • White 1000 - page 24

    4 OVERCASTING EDGES For thicker fabrics Both these stitches are designed to overlock the edge of a fabric. When the needle is at its extreme right position, aflow it to just pass over or just pierce the edge of the fabric according to the effect you require. Using the overcasting foot will prevent puckering of thin fabrics. I BINDING 25 ...

  • White 1000 - page 25

    STRAIGHT STRETCH STITCH The straight stretch sews two stitches forward and one stitch backwards, thereby giving “triple” strength. Use it for stretch fabrics and for areas of “stress” where a strong stitch is required. Ill II ill ill II Ii Iii 26 ...

  • White 1000 - page 26

    I SEWING ON BUTTONS 1. Fit darning pate as described on page 12. 2. Use button presser foot and attach firmly 3. Place button between presser foot and fabric and lower presser foot. 4. Manuaily turn hand wheel towards you ensuring that the needle enters into both holes of button without obstruction. (Increase or decrease width settng(. 5. Sew about ...

  • White 1000 - page 27

    SEWING IN ZIPS Ft the Zipper foot. The Zipper foot can be moved to the left or right. (2) To sew on the right hand side of the zipper, move foot over to the right as illustrated and reverse the procedure to sew the left hand side of the zipper. (3) To move the “zip slider” out of the way, leave needle in the fabric, raise foot and slide it behi ...

  • White 1000 - page 28

    /7, BUTTON HOLE SEWING Ft the button hole foot. Set the s:tch length dial within the green marking to achieve the correct density (closeness) of satin sttch. (1) Sew in the sequence illustrated (1) selecting patterns 18, 19, 20 and 19 again. USER TIPS Always sew a sample buttonhole on some spare fabric as settings will change according to the fabri ...

  • White 1000 - page 29

    HEMMING 1. Raise the foot and the needle to its highest position. Replace the foot with the hemmer foot. 2. Fold over the fabric edge by about 3mm and place it under the foot. Secure the folded edge with a few stitches. Take out the workpiece and draw the hem into the hemmer foot by pulling the threads. 4. During sewing, fold the fabric to the left ...

  • White 1000 - page 30

    TWIN NEEDLE Thread machine as for normal sewing using both spool cins and pass the threads through the same procedure but through the eye of each needle. NB. Sewng width shouid not exceed the third wdest stitch :vlath eAceedEng this will result n breakinc of needles. Suitable for stitch numbers 1, 2, 3 and 13 only, FREEHAND EMBROIDERY Stretch the f ...

  • White 1000 - page 31

    CLEANING OF RACE AND SHUTTLE HOOK Raise the needle bar to its highest point by turning the hand wheel toward you. Open shuttle cover. 1) Take out the bobbin case. 2) Unlock the shuttle race holder. 3) Release the shuttle race cover. 4) Take out the shuttle hook Clean dust and gummed oil off each part with an oiled cloth. When finished cleaning, rea ...

  • White 1000 - page 32

    0 V 0 :3 :3 C, Ct, c. a cz 0 C D 0. Ct, a CD 0 0 CD a C CD 0 V CE, :3 0 -o C-) 0 CE, :3 a. 0 V 0 :3 a C, 0) (13 C) Co 0) 3 :3 (C, (13 (13 a a 0 (C, C) m z z z 0 z 7- ...

  • White 1000 - page 33

    TROUBLE-SHOOTING GUIDE Threod is of poor quality Fool pressure is 100 light Bobbin is thieoc t ed incorrectly Moteiiol is being pulled by operator I Mac hint needc c,,l 2 tint and oil residue hose collected in hook or on needle bar 3 Inferior oil has been used and gums-up mochine 4 Needle is donaged. 5. Maiiiine requires servicing I Use quality thr ...

Fabricant White Catégorie Sewing Machine

Les documents que nous recevons du fabricant de l'appareilWhite 1000 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques White
- manuels d’utilisations 1000
- fiches produit White
- dépliants
- ou étiquettes-énergie White 1000
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation White 1000.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation White 1000, manuels d’entretien, brefs manuels ou manuels de l’utilisateur White 1000. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit White 1000.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil White 1000, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser White 1000 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs White 1000.

Le manuel d’utilisation complet White, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel White 1000 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières White 1000, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lWhite 1000 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil White 1000 - qui devraient nous aider dans les premières étapes lors de l'utilisation White 1000
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de White 1000
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service White 1000 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de White 1000?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec White 1000, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec White 1000 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)