Français dropdown-ico

Manuel d’utilisation Sub-Zero BI-36U

40 pages 2.29 mb
Télécharger

Aller à la page of 40

Summary
  • Sub-Zero BI-36U - page 1

    Built-In Refrigeration Design Guide ...

  • Sub-Zero BI-36U - page 2

    Features and specications ar e subject to change at any time without notice. Visit subzero.com/specs for the most up-to-date information. IMPORT ANT NOTE: Throughout this guide, dimensions may vary by ± 1 / 8 " (3) . Dimensions in parentheses ar e millimeters unless otherwise specied. Contents 3 Built-In Refrigeration 4 Design Options 6 ...

  • Sub-Zero BI-36U - page 3

    subzero.com/specs | 3 BUIL T -IN REFRIGERA TION • Ener gy efcient; many models ar e ENERGY ST AR ® qualied. • Advanced water ltration and air purication systems. • NEW! French door models r equires less space for door clearance to accommodate virtually any-size kitchen. • NEW! Internal dispenser models provide ice and chilled w ...

  • Sub-Zero BI-36U - page 4

    4 | Sub-Zero Customer Car e 800.222.7820 Built-In Design Options FRAMED For the classic Sub-Zero look, choose framed custom door panels that contrast with the stainless steel full-length handles and louvered grille (shown). The framed applica- tion is an overlay model with framed design features. Panel, grille and handle options are available. Pane ...

  • Sub-Zero BI-36U - page 5

    subzero.com/specs | 5 Built-In Design Options FLUSH INSET The ush inset design option allows for ush door and grille panels and custom handle hardwar e. Shown with tubular handle option to match W olf built-in ovens. The ush inset application is an overlay model with ush inset panels. Cus- tomize with panel, grille and handle options. P ...

  • Sub-Zero BI-36U - page 6

    6 | Sub-Zero Customer Car e 800.222.7820 Overall Dimensions ALL REFRIGERA TOR / ALL FREEZER Models BI-36R, BI-36RG and BI-36F . BUIL T -IN REFRIGERA TION 36" (914) 84" (2134) 4" (1 02) 73 3 / 4 " (1873) 23 7 / 8 " (606) 37 1 / 4 " (946) 14 1 / 8 " (359) 23 7 / 8 " (606) 2 3 / 8 " (60) HEIGHT DIMENSIONS ? ...

  • Sub-Zero BI-36U - page 7

    subzero.com/specs | 7 BUIL T -IN REFRIGERA TION Overall Dimensions OVER-AND-UNDER Models BI-30U and BI-30UG. 30" (762) 84" (2134) 4" (1 02) 50 3 / 4 " (1289) 23" (584) 23 7 / 8 " (606) 23 5 / 8 " (600) 31 1 / 4 " (796) 12 1 / 8 " (308) 26 3 / 16 " (665) 23 7 / 8 " (606) 2 3 / 8 " (60) HEIG ...

  • Sub-Zero BI-36U - page 8

    8 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Overall Dimensions OVER-AND-UNDER Model BI-36UFD. 36" (914) 84" (2134) 4" (1 02) 50 3 / 4 " (1289) 23" (584) 23 7 / 8 " (606) 23 5 / 8 " (600) 19 1 / 2 " (495) 8" (203) 23 7 / 8 " (606) HEIGHT DIMENSIONS ± 1 / 2 " ( 13) 2 3 / 8 ...

  • Sub-Zero BI-36U - page 9

    subzero.com/specs | 9 BUIL T -IN REFRIGERA TION Model BI-36S. 36" (914) 84" (2134) 4" (1 02) 73 3 / 4 " (1873) 23 7 / 8 " (606) 22 1 / 4 " (565) 7 1 / 4 " (184) 8 3 / 4 " (222) 23 7 / 8 " (606) 2 3 / 8 " (60) HEIGHT DIMENSIONS ± 1 / 2 " ( 13) 26 3 / 16 " (665) Overall Dimensions SIDE-BY - ...

  • Sub-Zero BI-36U - page 10

    10 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Overall Dimensions SIDE-BY -SIDE Model BI-48S, BI-48SID and BI-48SD. 48" (1219) 84" (2134) 4" (1 02) 73 3 / 4 " (1873) 23 7 / 8 " (606) 23 7 / 8 " (606) 30" (762) 11 5 / 8 " (295) 8 3 / 8 " (213) 2 3 / 8 " (60) HEIGHT DIMENSIONS ± ...

  • Sub-Zero BI-36U - page 11

    subzero.com/specs | 11 Specications BUIL T -IN MODELS INTERIOR CAP ACITY ALL REFRIGERA TOR / ALL FREEZER R CU FT (L) F CU FT (L) BI-36R 23.5 (665) BI-36RG 23.4 (663) BI-36F 22.7 (643) OVER-AND-UNDER R CU FT (L) F CU FT (L) BI-30U 13.2 (374) 4.2 (119) BI-30UG 13.1 (371) 4.2 (119) BI-36U 16.4 (464) 5.3 (150) BI-36UG 16.3 (462) 5.3 (150) BI-36UFD 1 ...

  • Sub-Zero BI-36U - page 12

    12 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Opening Dimensions ST ANDARD INST ALLA TION 83 3 / 4 " (2127) OPENING HEIGHT 24" (610) OPENING DEPTH NOTE: Shaded line represents profile of unit. FRONT VIEW SIDE VIEW T OP VIEW W OPENING WIDTH OPENING WIDTH MODEL W BI-36R, BI-36RG, BI-36F 35 1 / 2 " (902) BI-30U, BI ...

  • Sub-Zero BI-36U - page 13

    subzero.com/specs | 13 BUIL T -IN REFRIGERA TION Opening Dimensions FLUSH INSET INST ALLA TION FLUSH INSET WIDTH MODEL W BI-36R, BI-36RG, BI-36F 38" (965) BI-30U, BI-30UG 32" (813) BI-36U, BI-36UG, BI-36UFD, BI-36S 38" (965) BI-42UFD, BI-42S, BI-42SID, BI-42SD 44" (1118) BI-48S, BI-48SID, BI-48SD 50" (1270) Dimensions assum ...

  • Sub-Zero BI-36U - page 14

    14 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Opening Dimensions DUAL ST ANDARD INST ALLA TION 83 3 / 4 " (2127) OPENING HEIGHT 24" (610) OPENING DEPTH NOTE: Shaded line represents profile of unit. FRONT VIEW SIDE VIEW TO P VIEW W OPENING WIDTH OPENING WIDTH MODELS W T wo 30" Models 59 3 / 4 " (1518) 30&quo ...

  • Sub-Zero BI-36U - page 15

    subzero.com/specs | 15 BUIL T -IN REFRIGERA TION Opening Dimensions DUAL FLUSH INSET INST ALLA TION 84" (2134) FLUSH INSET HEIGHT 1 / 4 " (6) 26 3 / 16 " (665) FLUSH INSET DEPTH 2 3 / 16 " (56) *3 " (76) typical depth. Shaded areas will be visible and should be finished to match cabinetr y. NOTE: Shaded line represents prof ...

  • Sub-Zero BI-36U - page 16

    16 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Plumbing The water supply line should be located within the shaded area shown in the illustration below . The water supply line should be connected to the house supply with an easily accessible shut-off valve. Do not use self-pier cing valves. The water supply line must not interfe ...

  • Sub-Zero BI-36U - page 17

    subzero.com/specs | 17 FRAMED P ANELS The framed application is an overlay model with framed design features. It is not a separate model. If the custom panel is thinner than 1 / 4 " (6) , a ller material must be added to achieve a proper t. If the panel is thicker than 1 / 4 " (6) , rout an edge ar ound the panel or mount the custom ...

  • Sub-Zero BI-36U - page 18

    18 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION P ANEL MOUNTING KIT A Sub-Zero custom panel mounting kit eliminates the need for a backer and spacer panel and is avail able through an authorized Sub-Zero dealer . For local dealer information, visit the nd a showroom section of our website, subzer o.com. The kit consists of mo ...

  • Sub-Zero BI-36U - page 19

    subzero.com/specs | 19 BUIL T -IN REFRIGERA TION Custom Panels FLUSH INSET P ANELS The ush inset application is an overlay model with ush inset panels. It is not a separate model. The ush inset design allows custom panels to be installed ush with adjacent cabinets. Similar to overlay , ush inset panels are typically cr eated by combi ...

  • Sub-Zero BI-36U - page 20

    20 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION MODEL BI-36U, BI-36UG REFRIGERA TOR W H Door Panel 35 3 / 4 " (908) 49 15 / 16 " (1268) FREEZER W H Drawer Panel 35 3 / 4 " (908) 18 11 / 16 " (475) GRILLE (OPTIONAL) W H Grille Panel 35 3 / 4 " (908) 8 15 / 16 " (227) BI-36UG A Stiles / Rails 5 3 / 16 ...

  • Sub-Zero BI-36U - page 21

    subzero.com/specs | 21 BUIL T -IN REFRIGERA TION Framed Panel Dimensions MODEL BI-36S REFRIGERA TOR W H Door Panel 19 13 / 16 " (503) 69 9 / 16 " (1767) FREEZER W H Door Panel 15 7 / 16 " (392) 69 9 / 16 " (1767) GRILLE (OPTIONAL) W H Grille Panel 35 3 / 4 " (908) 8 15 / 16 " (227) MODEL BI-42S, BI-42SID, BI-42SD REFRI ...

  • Sub-Zero BI-36U - page 22

    22 | Sub-Zero Customer Car e 800.222.7820 Overlay Panel Dimensions MODEL BI-36R, BI-36RG, BI-36F REFRIGERA TOR / FREEZER W H Overlay Panel 36" (914) 69 3 / 4 " (1772) Spacer Panel 35 1 / 8 " (892) 68 15 / 16 " (1751) Backer Panel 35 3 / 4 " (908) 69 9 / 16 " (1767) GRILLE W H Overlay Panel 36" (914) 9 1 / 4 " ...

  • Sub-Zero BI-36U - page 23

    subzero.com/specs | 23 Overlay Panel Dimensions BUIL T -IN REFRIGERA TION H H H W A A A A H H W H H W H H W A A A B H H H W H W H H W W B A H H W W W H H H W A A A A H H W H H W H H W A A A B H H H W H W H H W W B A H H W W W BI-36S / BI-42S / BI-42SID BI-48S / BI-48SID BI-42SD / BI-48SD MODEL BI-42UFD REFRIGERA TOR (2 P ANELS) W H Overlay Panels 2 ...

  • Sub-Zero BI-36U - page 24

    24 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Flush Inset Panel Dimensions MODEL BI-36R, BI-36RG, BI-36F REFRIGERA TOR / FREEZER W H Flush Inset Panel 37" (940) 69 3 / 4 " (1772) Spacer Panel 35 1 / 8 " (892) 68 15 / 16 " (1751) Backer Panel 35 3 / 4 " (908) 69 9 / 16 " (1767) GRILLE W H Flush Ins ...

  • Sub-Zero BI-36U - page 25

    subzero.com/specs | 25 BUIL T -IN REFRIGERA TION Flush Inset Panel Dimensions MODEL BI-42UFD REFRIGERA TOR (2 P ANELS) W H Flush Inset Panels 21 3 / 8 " (543) 50 1 / 8 " (1273) Spacer Panels 20" (508) 49 5 / 16 " (1253) Backer Panels 20 5 / 8 " (524) 49 15 / 16 " (1268) FREEZER W H Flush Inset Panel 43" (1092) 19& ...

  • Sub-Zero BI-36U - page 26

    26 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Flush Inset Panels P ANEL OFFSETS The illustrations provide panel of fsets and reveals for built-in models in a ush inset application. Refer to the chart below for refer ence to the illustrations. P ANEL OFFSET ALL REFRIGERA TOR / ALL FREEZER ILLUS Door / Grille Sides A Grille T ...

  • Sub-Zero BI-36U - page 27

    subzero.com/specs | 27 BUIL T -IN REFRIGERA TION Dual Installation If two units are installed side by side, a dual installation kit may be requir ed. Installations without a custom ller strip requir e a dual installation kit. If a dual installation kit is not specied, a 2" (51) ller strip is recommended between units. A custom ller ...

  • Sub-Zero BI-36U - page 28

    28 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Dual Flush Inset Panel Dimensions MODEL BI-36R, BI-36RG, BI-36F REFRIGERA TOR / FREEZER W H Flush Inset Panel 36 1 / 2 " (927) 69 3 / 4 " (1772) Spacer Panel 35 1 / 8 " (892) 68 15 / 16 " (1751) Backer Panel 35 3 / 4 " (908) 69 9 / 16 " (1767) GRILLE W ...

  • Sub-Zero BI-36U - page 29

    subzero.com/specs | 29 BUIL T -IN REFRIGERA TION Dual Installation DUAL FLUSH INSET P ANEL OFFSETS The illustrations provide panel of fsets and reveals for built-in models in a dual ush inset application. Refer to the chart below for refer ence to the illustrations. P ANEL OFFSET ALL REFRIGERA TOR / ALL FREEZER ILLUS Door (hinge) / Grille Sides ...

  • Sub-Zero BI-36U - page 30

    30 | Sub-Zero Customer Car e 800.222.7820 Dual Installation DUAL WIDE GRILLE A dual wide grille spans the entire width of both units in a dual installation and is a part of a dual installation kit. For overlay and ush inset panel dimensions for the dual wide grille, refer to the charts below . Dimensions listed are for a standard 84" (2134) ...

  • Sub-Zero BI-36U - page 31

    subzero.com/specs | 31 Side Panel The custom side panels must be a minimum of 24" (610) deep and 1 / 2 " (13) thick. Routing will be necessary for the side panel to t ush against the side of the unit. Refer to the illustrations below . When installing a built-in unit with a custom side panel, an accessory kit is requir ed. Stainless ...

  • Sub-Zero BI-36U - page 32

    32 | Sub-Zero Customer Car e 800.222.7820 Framed Panels FULL-SCALE TEMPLA TE BUIL T -IN REFRIGERA TION OPTIONAL EXTENDED FULL-LENGTH HANDLE ST ANDARD FULL-LENGTH HANDLE 1 / 4 " (6) FRAMED P ANEL DOOR 1" (25) 3" (76) 1 1 / 4 " (32) P ANEL 1" (25) P ANEL 1 / 2 " (13) P ANEL 3 / 4 " (19) P ANEL 2" (51) Framed pa ...

  • Sub-Zero BI-36U - page 33

    subzero.com/specs | 33 Overlay and Flush Inset Panels FULL-SCALE TEMPLA TE Overlay and ush inset panels must be a minimum of 5 / 8 " (16) thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door . BUIL T -IN REFRIGERA TION Overlay and ush inset pane ...

  • Sub-Zero BI-36U - page 34

    34 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION 23 7 / 8 " (606) TO REAR OF UNIT O VERALL WIDTH OF UNIT 1 1 / 4 " (32) 1 1 / 2 " (38) 1 3 / 4 " (44) 0" (0) 1" (25) 2" (51) 2 1 / 4 " (57) 2 1 / 2 " (63) 2 3 / 4 " (70) 3" (76) 3 1 / 4 " (83) 3 1 / 2 " (89) 1 / 4 &quo ...

  • Sub-Zero BI-36U - page 35

    subzero.com/specs | 35 BUIL T -IN REFRIGERA TION 1 1 / 4 " (32) ASSUMES 3 / 4 " (19) FLUSH INSET P ANEL THICKNESS 2 3 / 16 " (56) 24" (610) TO BA CK W ALL 3 / 4 " (19) THICK FLUSH INSET P ANEL (TYPICAL) 1 / 4 " (6) BACKER P ANEL 1" (25) THICK P ANEL 1" (25) 0" SCALE 110° door opening (top view). Flush I ...

  • Sub-Zero BI-36U - page 36

    36 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION 1 1 / 4 " (32) FILLER STRIP APPR OX PR OFILE OF ST AINLESS STEEL WRAPPED DOOR AND HANDLE DOOR OPEN 110° DOOR CLOSED Dual standard installation (top view). Dual Standard Installation FULL-SCALE TEMPLA TE T ypical framed, overlay or stainless steel dual installation with lle ...

  • Sub-Zero BI-36U - page 37

    subzero.com/specs | 37 BUIL T -IN REFRIGERA TION 1 1 / 2 " (38) 1 / 2 " (13) FILLER STRIP PROFILE OF 3 / 4 " (19) FLUSH INSET P ANEL AND TUBULAR HANDLE DOOR CLOSED DOOR OPEN 110° Dual ush inset installation (top view). Dual Flush Inset Installation FULL-SCALE TEMPLA TE T ypical ush inset dual installation with ller strip at ...

  • Sub-Zero BI-36U - page 38

    Sub-Zero Residential Limited Warranty FOR RESIDENTIAL USE FULL TWO YEAR WARRANTY* For two years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defec- tive in materials or workmanship. All service provided ...

  • Sub-Zero BI-36U - page 39

    Sub-Zero, Sub-Zero & Design, Dual Refrigeration, The Living Kitchen, Gr eat American Kitchens The Fine Art of Kitchen Design, and Ingredients are r egistered trademarks and service marks of Sub-Zero, Inc. Wolf, W olf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs ar e register ed trademarks and service marks of ...

  • Sub-Zero BI-36U - page 40

    SUB-ZERO, INC. P.O. BOX 44848 MADISON, WI 53744 SUBZERO.COM 800.222.7820 SZBIDG 1/ 201 4 ...

Fabricant Sub-Zero Catégorie Refrigerator

Les documents que nous recevons du fabricant de l'appareilSub-Zero BI-36U peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Sub-Zero
- manuels d’utilisations BI-36U
- fiches produit Sub-Zero
- dépliants
- ou étiquettes-énergie Sub-Zero BI-36U
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Sub-Zero BI-36U.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Sub-Zero BI-36U, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Sub-Zero BI-36U. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Sub-Zero BI-36U.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Sub-Zero BI-36U, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Sub-Zero BI-36U par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Sub-Zero BI-36U.

Le manuel d’utilisation complet Sub-Zero, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Sub-Zero BI-36U - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Sub-Zero BI-36U, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lSub-Zero BI-36U qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Sub-Zero BI-36U - qui devraient nous aider dans les premières étapes lors de l'utilisation Sub-Zero BI-36U
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Sub-Zero BI-36U
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Sub-Zero BI-36U dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Sub-Zero BI-36U?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Sub-Zero BI-36U, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Sub-Zero BI-36U il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)