Français dropdown-ico

Manuel d’utilisation Transition Networks MIL-SM808GPXX

117 pages 1.09 mb
Télécharger

Aller à la page of 117

Summary
  • Transition Networks MIL-SM808GPXX - page 1

    8 Port 1 00BAS E-FX Plus On e SFP Intelligen t Fiber Swit ch MIL-SM 808GPxx USER GUI DE ...

  • Transition Networks MIL-SM808GPXX - page 2

    ii Regulatory A pproval - FCC Class A - UL 1950 - CSA C22.2 No. 950 - EN60950 - CE - EN55022 Class A - EN55024 Canadian EMI Notice This Class A digital apparatu s meets all the requirements of the Canadian Interfe rence-Causing Equipment Regulations. Cet appareil numerique de la classe A respecte toutes le s e xigences du Reglement sur le materiel ...

  • Transition Networks MIL-SM808GPXX - page 3

    iii T o Cont act MiLAN T echnology For prompt response whe n calling for service information, have the following i nformation ready: - Product seri a l number a nd revision - Date of purcha se - V e ndor or place o f purchase Y ou can reach MiLAN T echnology technical support at: E-mail: support@mila n .com T e lephone: +1. 408.744.2751 Fax: +1.408 ...

  • Transition Networks MIL-SM808GPXX - page 4

    iv T able of Cont ent s 1. Introduction Features Intelligent Management Feature s Package Contents Management Methods Console and T elnet M anagement Web-based Ma nagement SNMP Networ k Management 2. Hardware Description Front Panel LED Indicators Rear Panel Desktop Installation 3. Network A ppli cation Segment Application 4. Network Configuration ...

  • Transition Networks MIL-SM808GPXX - page 5

    v 4-3-4-2. Create a VLAN Gr oup 4-3-4-3. Edit / Delete a VLAN Group 4-3-5. Priority Configuration 4-3-6. MAC Address Configuration 4-3-6-1. S tatic MAC Address 4-3-6-2. Filtering MAC Address 4-3-7. Misc. Configuration 4-3-7-1. Port Security 4-3-7-2. MAC Age Interval 4-3-7-3. Broadcast S tor m Filtering 4-3-7-4. Max Bridge Tra nsmit Delay Bound 4-4. ...

  • Transition Networks MIL-SM808GPXX - page 6

    vi 5-4-3. Console Port Information 5-4-4. Port Controls 5-4-5. T r unk ing 5-4-5-1. Agg regator Settin g 5-4-5-2. Agg regator Inform ation 5-4-5-3. S tate Activity 5-4-6. Filter Dat abase 5-4-6-1. IGMP Snooping 5-4-6-2. S tatic MAC Address 5-4-6-3. Port Security 5-4-6-4. MAC Filtering 5-4-7. VLAN Configuration 5-4-7-1. Basic 5-4-7-2. Port VID 5-4-8 ...

  • Transition Networks MIL-SM808GPXX - page 7

    1 1. Introduction The MIL-S M808G manag ed compact desk top switch is an ideal solution for a Fiber net work in frastructure. It pro vides wire-sp eed, Fast Etherne t switching providing high- performance data t ransf er . The s witch features a store-and-f orward architectur e with auto- learning of source addre sses with an 8K-entr y MAC address ...

  • Transition Networks MIL-SM808GPXX - page 8

    2 Featu res  Conforms to IEEE802.3u, IEEE802.3z and IEEE802.3x Ethernet S tandards  Eight 100Mbp s Fast Ethernet Fiber ports and one S FP port  One Console p o rt on the front for switch softw are configuration  Half-duplex mode for b ack pressure and f low control for full-duplex  S tore-and-forward switching architecture  Automa ...

  • Transition Networks MIL-SM808GPXX - page 9

    3 Package Cont ent s Unpack the contents of the package and verify them against the checklist below .  MIL-SM808G Switch  Power Co rd  Four Rubber Feet  RS-232 cab le  User Gui de ( CD Man ual)  Warranty Card If any item is missing or dam aged, p lease contact your local dealer f or service. Management Methods The MIL-S M808G swit ...

  • Transition Networks MIL-SM808GPXX - page 10

    4 Web-based Manag ement The switch pro vides an emb edded HT ML web server residing in f lash memory . It offers advanced manag ement features and allo ws users to manage the s witch from anywhere o n the net work through a standar d browser such as Microsoft Intern et Explorer o r Netscape. ...

  • Transition Networks MIL-SM808GPXX - page 11

    5 SNMP Netwo rk Managemen t SNMP (Simple Net work Managemen t Prot ocol) provides a me ans to monitor and c ontrol n etwork devices , and to manag e conf igurations, statistic collection, performance , and secu rity . ...

  • Transition Networks MIL-SM808GPXX - page 12

    6 2. Hardw are Description Front Panel The Front Panel of th e MIL-SM808G switch series con sists of eight 100Mbps Fast Ether net Fiber por ts, one SFP port, one conso le port, o ne LED-Indicator for Power , one LED-Ind icator (L NK/ACT) for the SFP port and two L ED-Indicators (LN K/ACT , FDX/COL) f or each Fiber port. Conso le LED SFP Fast Ethern ...

  • Transition Networks MIL-SM808GPXX - page 13

    7 LED Indicators Figure 2-2. L ED Indicators There are t wo LED-Indicators (LNK/A CT , FDX/CO L) for each Fiber port, one LED-Indicator (L NK/ACT) for the SFP port and one LED-In dicator for power . The f ollowing table provides descriptions of the LE D statuses and meaning. They pro vide a real-time indication of systematic ope ration status. LED ...

  • Transition Networks MIL-SM808GPXX - page 14

    8 Rear Panel The 3-pronge d power plug and the po wer on/off s witch are located at th e Rear Pane l of the MIL- SM808G swit ch, as shown in Figure 2-3. The switches will work wi t h AC in the ra nge 10 0-240V A C, 50-60Hz . Power Plug Power On/Of f Switch Figure 2-3. The Rear Panel of the MIL-SM8 08G Switch Desktop Inst allati on Set the switch on ...

  • Transition Networks MIL-SM808GPXX - page 15

    9 Figure 2-4. Att ach ing Rubber Feet t o each c orner on the bottom of the Switch Power On Connect the power cord to the po wer sock et on the rear panel of the Switch. Connect th e other end of the cord to an appropr iate power outlet. The interna l po wer suppl y in the switch works with AC in the voltage range 100-240V AC, f requency 50~ 60Hz. ...

  • Transition Networks MIL-SM808GPXX - page 16

    10 3. Netw ork Appl ication Segment Application For enterprise network s where large da t a br oadcasts are constant ly processed, th is switch is sui table for department user s to conn ect to the corporate back bone. Y ou can use the MIL-S M808G switc h to connect PC s, works t ations, and servers to eac h other by connecting th ese de vices dire ...

  • Transition Networks MIL-SM808GPXX - page 17

    1 1 4. Netw ork Configuration Conn ecting a T ermi nal or PC to the Con sole Port Console manag ement in volves the adm inistration o f the switch via a direct connect ion to the RS-232 conso le port. This port is a female DB-9 connector . From the main menu of the conso le progr am, the user has access to mana ge the f unctions of the switch. Figu ...

  • Transition Networks MIL-SM808GPXX - page 18

    12 After the connect ion between Switch and PC is finished, turn on the PC and run a ter minal emulat ion program or Hyper T ermi nal to match th e following def ault char acteristics of the console port : Baud Rate: 9600 bp s Dat a Bit s: 8 Parity: none Stop Bit s: 1 Flow Control: None Figure 4-2. The sett ings of commun ication parameters After y ...

  • Transition Networks MIL-SM808GPXX - page 19

    13 logon screen and a n ew login is nec essary in orde r to continue . 4. The s witch is shipped with a def ault IP ad dress of 192 .168.1.77. The def ault subnet mask is 255.255.255.0. ...

  • Transition Networks MIL-SM808GPXX - page 20

    14 4-1 M ain Menu There are f ive items f or selection as follows: S tatus and Coun ters: Sho ws the status of t he switch. Sw itch S tat ic Configuration : Menus to configu re the switch. Protocol Related Configu ration: Con figures pro tocol feature s. Reboot Sw itch: Restarts the system or resets the switch to the def ault conf iguration. Logout ...

  • Transition Networks MIL-SM808GPXX - page 21

    15 4-2. St atus and Count ers Press the T ab or Backspace key to choo se action men u, and then press the Enter ke y to select the item. ...

  • Transition Networks MIL-SM808GPXX - page 22

    16 4-2-1. Port St a tus T ype: Disp lays the port type o f either 100 Mbps or 1000Mbps. Enabled: A port tha t is enab led will be displa yed as “Y e s”. A po rt that is disabled will be displayed as “No”. S tatus: Displays the port's link. “Down” the port has no link, and “Up” the port has a link with the rem ote device. Mode: ...

  • Transition Networks MIL-SM808GPXX - page 23

    17 4-2-2. Port Count ers The f oll o wing inf ormation provides a view of the current da t a pack et informatio n of the uni t. T he screen is not automatica lly updated. T o see updated statistic s, exit the menu and re-e nter . Actions-> Press the T ab or Backspace key to choo se action men u, and then press Enter ke y to select item <Quit& ...

  • Transition Networks MIL-SM808GPXX - page 24

    18 4-2-3. System Inf ormation System Desc ription: Disp lays the name of the device. M AC A ddr ess: The unique hard ware add ress assigned by manuf acturer . Firmw are V ersion: Displays the s witch’s firmware versio n. Hardw are V ersion: D isplays the s witch’s Hardware versi on. Kernel ver sion: Displa ys Boot PRO M version. ...

  • Transition Networks MIL-SM808GPXX - page 25

    19 4-3. Switch St a tic Configu ration Press the T ab or Backsp ace k ey to choo se action men u, and then pr ess the Enter ke y to select item . 4-3-1. A dmin istratio n Configurati on ...

  • Transition Networks MIL-SM808GPXX - page 26

    20 ...

  • Transition Networks MIL-SM808GPXX - page 27

    21 4-3-1-1. Device Inf ormation Device Name: 10 charact ers can be u sed to give the swit ch a unique name in order to d istinguish it on the networ k. After conf iguration this n ame will show at the top of each me nu screen. Device Co ntent: 32 charact ers can be u sed to d escribe devices attached. Device Loca tion: 32 characters ca n be used t ...

  • Transition Networks MIL-SM808GPXX - page 28

    22 4-3-1-2. I P Configuration This menu en ables the user to chang e the def ault settings of the IP address, subnet mask and gat eway . Rebooting the switch is necessar y to have the conf iguration change t ake affe ct. Actions-> <Edit>: C onfigures a ll items. W hen finished, pressi ng ESC retu rns to the action men u line. <Save>: ...

  • Transition Networks MIL-SM808GPXX - page 29

    23 4-3-1-3. Change Username Use this s creen to ch ange the User Name. The def ault user name is root. 4-3-1-4. Change Password Use this s creen to ch ange the Pass word. The def ault p ass word is root. ...

  • Transition Networks MIL-SM808GPXX - page 30

    24 4-3-2. Port / T run k Configu ration This page can ch ange every p ort status and conf igure trunk g roups. Press T A B key to change the configurat ion of each item. 1. Enabled: User can disa ble or enable the port. Port 9 is always enabled. 2. Auto Ne g otiate: Por ts 1 t o 8 (100Mbps Fi ber) are d isabled, Port 9 (SFP port) is enab led. 3. Sp ...

  • Transition Networks MIL-SM808GPXX - page 31

    25 Actions-> <Quit>: Exits the por t conf iguration page and retur ns to previo us menu. <Edit>: C onfigures a ll items. W hen finished, pressi ng ESC retu rns to the action men u line. <Save>: Saves all c onfigured va lues. ...

  • Transition Networks MIL-SM808GPXX - page 32

    26 4-3-3. Port Mirroring Configura tion Port mirro ring is a method for monitor ing traffic in switch ed network s. T r af f ic through ports can be monitored by one specific port. The traffic being received or transm itted by the monitored por ts will be duplicated into the mon itoring port. Press the S pace key to chang e the conf iguration of an ...

  • Transition Networks MIL-SM808GPXX - page 33

    27 action men u line. <Save>: Saves all c onfigured va lues. ...

  • Transition Networks MIL-SM808GPXX - page 34

    28 4-3-4. VL A N Con figuration All ports are automatically placed in VLAN 1, t he d efault VLAN. T o create new VLANs, use the Create a V LAN Group m enu and add a VLA N. Make s ure when you enter a VLAN name you do not leave spaces. For example VLA N2 is correct; VLAN 2 will give a n error . The VLA N name c an be any 15 alphan umeric characters. ...

  • Transition Networks MIL-SM808GPXX - page 35

    29 4-3-4-1. VL A N Co nfigure Choose a VLAN In the VLAN Configur e menu select the type of VLAN you want to configure: No VLAN (default), Port Bas ed, 802.1Q, or 802.1Q with GVRP . Save the co nfig uration. There are 4 d ifferent options f or VLANs to choose f rom using the space bar: Disabled, Port Based , 802.1Q and 802.1Q with GVRP . T o configu ...

  • Transition Networks MIL-SM808GPXX - page 36

    30 If more than one VL AN is necessar y , the additiona l VLANs ma y be created. PVID (Port VID): Set t he port VLAN ID t hat will b e a ssigned t o untagg ed traffic on a given po rt. This feature is u seful f or accommodat ing devices that you want to participate in t he VLAN, but don’t support tagging. Only one untagg ed VLAN is a llowed per p ...

  • Transition Networks MIL-SM808GPXX - page 37

    31 4-3-4-2. Create a V L A N Grou p T o create a VL AN and add tagg ed /untagged member por ts to it: 1. VL AN Name: T ype a name for the ne w VLAN using 15 a lphanumeric characters an d no spaces. 2. VL AN ID: T ype a VID (bet ween 2~409 4). The default is 1. 3. Protocol V LAN: P re ss the Sp ace key to choose protocol type. W hen set, this acts a ...

  • Transition Networks MIL-SM808GPXX - page 38

    32 ...

  • Transition Networks MIL-SM808GPXX - page 39

    33 4-3-4-3. Edit / Delet e a VL A N Gr oup Use this men u to edit or delete a VL AN group. W hen editing the cho sen VLAN, the user can cha nge the pro tocol VLAN or a member port. A n ew protocol can be co nfig ured and th e por ts c an be c hanged to tagged or un t agg ed or deleted a s member ports from this VLAN. In ed it mode the VLAN Name and ...

  • Transition Networks MIL-SM808GPXX - page 40

    34 4-3-5. Priorit y C onfigurat ion 1. There a re eight (0 to 7) priority le vels that can be m apped as h igh or lo w priority qu eues. 2. High/Low Q ueue S ervice Ration ( High:Low ): User can sele ct the ratio of high prior ity packet s and low pr iority packet s. Actions-> <Edit>: C onfigures a ll items. W hen finished, pressi ng ESC r ...

  • Transition Networks MIL-SM808GPXX - page 41

    35 High : 1 Lo w means t hat the switch se nds 2 h igh priority packets bef ore sending 1 low priority pa ck et. ...

  • Transition Networks MIL-SM808GPXX - page 42

    36 4-3-6. M A C A dd ress Configur ation 4-3-6-1. St ati c MA C A ddr ess W hen a st atic MAC address is added , i t remains i n the switch' s address table, regardless of wh eth er the device is physically connected to the switch. This saves the s witch f rom having to re- learn a device's MAC address when the device is d isconnected or ...

  • Transition Networks MIL-SM808GPXX - page 43

    37 Add st ati c MAC add ress 1. Press the < Add> ke y . Then press the <Edi t> key on this menu to add a static MAC addre ss. 2. Enter the MAC addre ss to and f rom which the port should perman ently forward traff ic, regardless of the device’s network act ivity . 3. In the Port num f ield, enter the port number f or the device. 4. If ...

  • Transition Networks MIL-SM808GPXX - page 44

    38 Edit st ati c MAC addre ss 1. Press <Ed it> key to m odify a static MAC address. 2. Choose the MAC address t hat you want to modif y and then pr ess enter . 3. Press the < Edit> ke y to modify a ll the items. 4. Press ESC to g o back action m enu line, a nd t hen select <Save> to save all conf igured values. Delete static MAC a ...

  • Transition Networks MIL-SM808GPXX - page 45

    39 4-3-6- 2.Filtering MAC A dd ress Edit Filteri ng MAC ad dress 1. Press the < Edit> ke y to modify a static Filtering address. 2. Choose the MAC address t hat you want to modif y and then pr ess enter . 3. Press the < Edit> ke y to modify a ll the items. 4. Press ESC to g o back action menu line, a nd t hen select < Save> to sav ...

  • Transition Networks MIL-SM808GPXX - page 46

    40 4-3-7. Misc Configu ration ...

  • Transition Networks MIL-SM808GPXX - page 47

    41 4-3-7-1. Port S ecurity A port se t in security mode will be “locke d” and be without a ddress lear ning. Only the incoming packets with the so urce MAC addr ess alrea dy existing in the address table can be fo rwarded. W ith port secur ity , use rs can d isable a port from learn ing new MAC add resses. The user may then return t o t he stat ...

  • Transition Networks MIL-SM808GPXX - page 48

    42 4-3-7-2. M A C A g e Int erval T o configure a different MAC Age Interval, type the nu mb er of s econds t hat a n inactive MAC address rema ins in the s witch’s address table bef ore it is deleted. Onc e the ad dress is remove d from the ta ble, a device will have to send out broadcast packets to be relearne d b y the swit ch and h ave it s a ...

  • Transition Networks MIL-SM808GPXX - page 49

    43 4-3-7-3. Broadcast Storm Fil tering Broadcast storm filtering is used to limit the amount of b roa dcast t raffic on the network. An excess ive amoun t of broadca st traffic can inhibit data p ack ets from timel y delivery . The valid thres hold v alues are 5%, 10%, 15% , 20%, 25% an d NO. If the broadcast traffic is greater than the config ured ...

  • Transition Networks MIL-SM808GPXX - page 50

    44 ...

  • Transition Networks MIL-SM808GPXX - page 51

    45 4-3-7-4. Max Bridg e T ransmit Dela y Bound Max bridge t ransmit dela y bound ( 0,1-4 sec): Lim it s th e packets queuing time in the switch. If enabled, the packets exceed ing the queu ing time will be dropped. Press the Spa ce k ey to set the time. V alid values are 1sec, 2sec, 4sec and Off. The def ault is 1 second wh en this f eature is enab ...

  • Transition Networks MIL-SM808GPXX - page 52

    46 Actions-> <Edit>: C onfigures a ll items. W hen finished, pressi ng ESC retu rns to the action men u line. <Save>: Saves all c onfigured va lues. <Quit>: Exits this pag e and returns to pr evious me nu. ...

  • Transition Networks MIL-SM808GPXX - page 53

    47 4-4.P rotocol Relat ed Configur ation 4-4-1. STP 4-4-1- 1.STP Enable This page enable s or disables t he S p ann ing T ree func tion. Press the Sp ace key to se lect Enable d or Disabled. ...

  • Transition Networks MIL-SM808GPXX - page 54

    48 ...

  • Transition Networks MIL-SM808GPXX - page 55

    49 4-4-1-2. System Con figuration S panning tree infor mation for th e Root Bridg e on the left is f or display only . Config ure new values f or the STP parameter on th e right. Y ou must enable ST P fu nction bef ore selecting the configur ation menu. Priorit y: The value used to ident ify the root bridge. The bri dge with the l owest value has t ...

  • Transition Networks MIL-SM808GPXX - page 56

    50 from i ts S panning- T ree P rotoco l learning and li steni ng states to the fo rw ar ding state. Enter a num ber 4 through 3 0. ...

  • Transition Networks MIL-SM808GPXX - page 57

    51 4-4-1-3. STP Port Configurat ion 1. PortSt ate: S panning tre e status for each port . 2. PathCost : S pecif ies the path cost of the port that the switch u ses to determine which ports are the forwarding ports. If you chang e the value, you need to r estart the switch f or valid value change to take effect. 3. Priorit y: S pec ifies the path co ...

  • Transition Networks MIL-SM808GPXX - page 58

    52 4-4-2. SNMP Any Net work Managemen t station running the Simple Ne twork M anag ement Protocol ( SNMP) can ma nage the switch provided that the Manag ement Information Base (MIB) is installed. SN MP is a protoc ol that go verns the transfe r o f information between management an d agent. The switch suppor ts SNMP V1. Use this men u to defi ne ma ...

  • Transition Networks MIL-SM808GPXX - page 59

    53 ...

  • Transition Networks MIL-SM808GPXX - page 60

    54 4-4-2-1. System Opt ions Press <Edit > to ent er all item s, and then press <Sa ve> to save th e co nfigu red values. 1. System Name : Ente r a name to identify t he switch. 2. System Con t act: Enter the name of the contact perso n or org anization. 3. System L ocation: Ent er the location of the switch. ...

  • Transition Networks MIL-SM808GPXX - page 61

    55 4-4-2-2. Communit y Strings Communit y strings se rve as passwords a nd can be enter ed as one of the following : Read on ly : Enables requests accompanied by thi s string to display MIB-obj ect information. Read Write : Enab les requests accom p an ied by this string to d isplay MIB-obj ect information and to set MIB objects. T o enter SNMP Com ...

  • Transition Networks MIL-SM808GPXX - page 62

    56 <Save>: Saves all c onfigured va lues. <Quit>: Exits this pag e and returns to pr evious me nu. ...

  • Transition Networks MIL-SM808GPXX - page 63

    57 4-4-2-3. T rap Mana gers A trap m anager is a manage ment station that rec eives traps. The switch generates s ystem alerts. If no trap manag er is defined, no tr aps are issued. Create a t rap manage r by entering the IP address of the station and a communit y string. Actions-> < A dd>: Creates a trap manage r . <Edit>: C onfigur ...

  • Transition Networks MIL-SM808GPXX - page 64

    58 4-4-3. GVRP Use the GVRP Config uration sc reen to enable or disab le GVRP (G ARP V LAN Registration Protocol) sup port. Press the S pace key to choo se Enab led or Disabled . Actions-> <Edit>: C onfigures a ll items. Press t he Sp ace ke y to choose E nabled or Disabled mode. W hen fin ished, pressi ng ESC retur ns t o the action menu ...

  • Transition Networks MIL-SM808GPXX - page 65

    59 4-4-4. L A CP ...

  • Transition Networks MIL-SM808GPXX - page 66

    60 4-4-4-1. Aggregato r Setting 1. Group: Di splays the t runk group ID. NOTE: Bef ore setting LACP support, you must first set t he trunk g roup using the Port / T run k Configurat ion screen. 2. LACP: Pre ss the Sp ace ke y to enable or disable LA CP (L ink Agg regation Control Prot ocol) sup port. If e nabled, the g roup is an LACP static trunki ...

  • Transition Networks MIL-SM808GPXX - page 67

    61 4-4-4-2. St ate A c tivit y Active: The port au tomatica lly sends LAC P prot ocol packets. Passive: The port do es not aut omatically se nds LACP protoco l packets, and responds only if it receives LACP protocol packets f rom the opposite d evice. Actions-> <Edit>: C onfigures a ll items. W hen finished, pressi ng ESC retu rns to the a ...

  • Transition Networks MIL-SM808GPXX - page 68

    62 4-4-4-3.L A CP S tatus W hen setting a trunki ng group, the r elationsh ip status informa tion may be seen on the LACP Group S tatus screen. Actions-> <Quit>: Exits this pag e and returns to pr evious me nu. ...

  • Transition Networks MIL-SM808GPXX - page 69

    63 4-5.Rebo ot Switch Default: Res ets the switch to the factory defau lt configuration . The software version tha t the switc h will be reset t o can be f ound on the “S ystem Information” menu under the main menu “S tatus and Counters ”. Rest art: Reboots the switch t o enab le items that have been con figured. W arning: The unit must be ...

  • Transition Networks MIL-SM808GPXX - page 70

    64 4-6.Updating Firmware using the Console P ort 1. W hile booting the s witch, press the X key t o st art the Xmodem routine on the device. 2. Pressing X will cause th e switch Xmode m applicati on to begin a nd cause the baud rat e to cha nge to 57600 b ps. Y ou will n eed to disconn ect the cable conn ected to t he serial port, a nd chang e the ...

  • Transition Networks MIL-SM808GPXX - page 71

    65 ...

  • Transition Networks MIL-SM808GPXX - page 72

    66 6. After successf ully upgrading to the new f irmware, chan ge the b aud rate back to the d efault 9600 bps. ...

  • Transition Networks MIL-SM808GPXX - page 73

    67 5. W eb-Based Management This section introduces the c onfigurat ion and f unctions of the web-based management of MIL-S M808G switc h series. The managed s witch ser ies provides an e mbedded HTML website residing in f lash memory . This feature allows users to m anag e t he switch from anywhere on the network through a standard web browser . N ...

  • Transition Networks MIL-SM808GPXX - page 74

    68 ...

  • Transition Networks MIL-SM808GPXX - page 75

    69 5-1. Web Man agement Ho me Overview 1. Home Page. ...

  • Transition Networks MIL-SM808GPXX - page 76

    70 5-2. Port stat us S tate: Disp lays port status off or on depend ing on user sett ing. “Un link” means the por t is offline or “off ”. Link St atus: Down is “No Link ”, Up is “L ink” Auto Neg otiation: Ind icates if the port is in auto negotiation mode. Speed st atus: Displays link speed. Ports 1-8 are 100Mbps. Port 9 is 1000Mbps ...

  • Transition Networks MIL-SM808GPXX - page 77

    71 5-3. Port St ati stics 1. The f oll o wing inf ormation provides a view of the current status of the unit. A s ingle port counter scre en: 5-4. A d min istrator The manag ement f unctions includ e IP a ddress, s witch settings, conso le port informatio n, port cont rols, link ag gregation, f ilter database, VL AN conf iguration, spanning tree, p ...

  • Transition Networks MIL-SM808GPXX - page 78

    72 ...

  • Transition Networks MIL-SM808GPXX - page 79

    73 5-4-1. I P A dd ress The IP Setting s can be change d by entering new values and clicking the app ly button. The s witch must be reset for the n ew IP address to take effect. Default IP:19 2.168.1. 77 Subnetmask :255.255 .255.0 Gateway:192. 168.1. 6 5-4-2. Switch Set tings 5-4-2-1. Basic Descriptio n: Displays th e name of device type. M AC A dd ...

  • Transition Networks MIL-SM808GPXX - page 80

    74 ...

  • Transition Networks MIL-SM808GPXX - page 81

    75 5-4-2-2. Advanced 1. Miscellane ous Settin gs: M AC A ddr ess A ge-o ut Time: T ype the number of seconds t hat an inacti ve MAC address rema ins in the s witch's address table. The valid range is 300 to 765 seconds. Defa ult is 300 second s. Max bridge t ransit dela y bound co ntrol: Limit s the packets q ueuing time in the switch. If enab ...

  • Transition Networks MIL-SM808GPXX - page 82

    76 2. Priorit y Queue Ser vice settings : First C o me Firs t Service: The seq uence of packets sent i s dependent on the order of arrival. The first packets in the qu eue are trans mitted bef ore any other packets. All High before Low : The high pr iority pack ets are sent bef ore the lo w priority packets. Weighted Round Robin: This opt ion e nab ...

  • Transition Networks MIL-SM808GPXX - page 83

    77 ...

  • Transition Networks MIL-SM808GPXX - page 84

    78 3. Protoco l Enable Set ting: Enable Sp anning T ree Prot ocol: Enable s STP . T he recomm ended def ault is to disable STP . Enable Inte rnet Group M ulticast Protoc ol: Enab les IGMP protocol. IGMP Query Mode: Recognizes d ifferent queries f rom clients or servers to decide which Query will be t he f irst priority . The f our modes ar e: Auto ...

  • Transition Networks MIL-SM808GPXX - page 85

    79 4. IGMP Theor y of Operation The f oll o wing three top ologies detail ho w IGMP Q uery work s and to be conf igured within a ne twork: 1. Auto m od e needs to be ena bled when the ro uter ’ s IP a ddress is sma ller than other s witches in the subnet. 2. IGMP needs to be enabled when the router ’ s IP a dd ress is not sma ller than other s ...

  • Transition Networks MIL-SM808GPXX - page 86

    80 ...

  • Transition Networks MIL-SM808GPXX - page 87

    81 3. The f ollowing topo logy m ust be set when the I P a ddress of the switch is n ot the smallest in the subnet. The network will cause a multi-cast stor m from the IGMP c lient re port if it is in Auto mo de. All switches must be in disable mode when the VOD serve r is configu red for IGMP Querier . Note: It is sugg ested t hat the VOD se rver ...

  • Transition Networks MIL-SM808GPXX - page 88

    82 5-4-3. Console Port Informati on Console is a standard UART interface to comm unicate with a serial port . The W indows HyperT erminal prog ram can be us ed to link the switch wit h the console po rt. In order to chang e any of these param eters, you must be connected to the con sole port. Baud rate (bi ts/ sec) : 9600 Dat a Bits: 8 Parity Check ...

  • Transition Networks MIL-SM808GPXX - page 89

    83 5-4-4. Port Control s The menu a llows changing of port configurat ions. S tate: User ca n disable or en able ports 1-8, port 9 is always en abled. Auto Neg otiation: Por t s 1-8 ar e f ixed to disabled mode, and por t 9 is enabled. Speed setting: Ports 1-8 are set at a f ixed speed of 100 Mbps. Port 9 is fixed at 1000 Mbps (SFP por t). Duplex s ...

  • Transition Networks MIL-SM808GPXX - page 90

    84 on the network . LACP operation require s full-dupl ex mode. For more detailed informatio n refer to IEEE 80 2.3ad. If there are t wo trun k g roups A and B, a nd B grou p is e nab led L ACP , then i t w ill act as a redund ant link (Backup group f or T runk group A). If trunk g roup A fails, Group B will be it's back up. ...

  • Transition Networks MIL-SM808GPXX - page 91

    85 5-4-5- 1. A ggreg ato r Setting System Priority: A v alue used to identify the active LACP . The switch with t he lowest va lue has the highest priority and is select ed as the act ive LACP . T o create a trunk across two or more ports: 1. Group ID: Choose the " Group ID" and click " Get". 2. LACP: If enabled, the group supp ...

  • Transition Networks MIL-SM808GPXX - page 92

    86 5-4-5-2. A ggreg ato r Information The LACP Aggregator relat ion inform ation is displa yed as shown . 5-4-5-3. S tate A cti vity Active (se lect) : The act ive port automati cally sen ds LACP protoco l packet s. Passive (not selected ) : The passive port does not aut omatically se nd LACP protocol packets, but responds onl y if it rece ives LAC ...

  • Transition Networks MIL-SM808GPXX - page 93

    87 ...

  • Transition Networks MIL-SM808GPXX - page 94

    88 5-4-6. Filter Database 5-4-6-1. I GMP Snooping The switch su pports IP multicasting. Y ou c an enable IG MP via the web management ’s configuration scree n. In add ition, you can view different multicast groups, VIDs and mem ber por ts, and IP m ulti cast ad dresses that range f rom 224.0.0.0 through 239.255 .255.255. The I nternet G roup Mana ...

  • Transition Networks MIL-SM808GPXX - page 95

    89 5-4-6-2. S tatic MA C A dd ress W hen a st atic MAC address is added , i t remains i n the switch' s address table, regardless of wh eth er or not the d evice is ph ysically conne cted to the s witch. This saves t he switch fr om having to re- learn a de vice's MAC addr ess when the device is disconn ected or powe red-off. T o add a st ...

  • Transition Networks MIL-SM808GPXX - page 96

    90 5-4-6-3. Port Secu rity A port in securit y mode will be “lock ed” with addre ss learning blocked. On ly the incoming packets with SMAC alread y existing in the addres s table can be forwarded norm ally . The user ca n d isable the port from learning an y new MAC addresses, then use the static MAC addre sses screen to define a list of MAC ad ...

  • Transition Networks MIL-SM808GPXX - page 97

    91 5-4-6- 4. M A C Fil tering MAC address filtering allows the s witch to drop un wanted traffic. T raffic is f ilt ered ba sed on the destination a ddresses. S teps to sp ecify a M AC address to filter: 1. In the MAC A ddre ss box, e nter the MAC a ddress to f ilter . 2. If tag-based (802. 1Q) VL AN are set up on the switch, in the VL AN ID box, t ...

  • Transition Networks MIL-SM808GPXX - page 98

    92 5-4-7. VL A N Con figuration A Virtual LAN (VLAN) is a logical net work grouping that limits the broa dcast domain. It allows you to isolate net work traffic so only me mbers of the VLAN receive traffic f rom the same V LA N m embers. Bas ically , cre ating a VLAN from a switch is logically eq uivalent of reconnecting a group of network devices ...

  • Transition Networks MIL-SM808GPXX - page 99

    93 5-4-7-1. Basic VL AN Configuration By default, there are no V LANs set for the switch. In order to c onfigure any of the different types of VLANs, VLANs need to be enabled in the s witch using Settings/Advanced/Protocol Ena ble Settings/VLAN Operational M ode. The following are the choices offered: Port Based VLANs This screen shows the c urrent ...

  • Transition Networks MIL-SM808GPXX - page 100

    94 switch on separate VLANs except for the port that has the server connected to it. This port is then shared by all t he VLANs. This enables security between ports, but allows all ports access to the server . Create a VLAN and add t agged m ember ports to it. 1. From the main menu, c lick A dmin istrator -- VL AN Configura tion . 2. Click Add. 3. ...

  • Transition Networks MIL-SM808GPXX - page 101

    95 5-4-7-2. Port VID Configure port VID settings: From t he mai n T a g-based (IEEE 802.1Q) V LAN page, cl ick P ort VID S etti ngs. Port VID (PVID) Used for setting the Port VLAN ID th at will b e ass igned to un tagged traffic on a given port . For example, if port 9's Def ault PVID is 100 , all untagged packets on port 9 will belong t o VLA ...

  • Transition Networks MIL-SM808GPXX - page 102

    96 Ingress Filt ering Rule 2 : Drop Untagged Fr ame. By def ault all untagged frames are f orwarded. ...

  • Transition Networks MIL-SM808GPXX - page 103

    97 5-4-8. Sp annin g T ree The S panning-Tree P r otocol (STP) is a standardized me thod (IEEE 802.1D) for avoiding loo p s in switched networks. W hen STP is enab led it ensures that only one path at a time is active between any two nodes on the net work. S panning -T ree Protoco l can be enab led using web manag ement’s switch setting ad vanced ...

  • Transition Networks MIL-SM808GPXX - page 104

    98 Information a bout th e current spanning tree status is displa yed in this table. Parameter Description Priority The priori ty value used to i dentify the root bridge can be changed. The bridge with the lowest value has the highest pri ority and is sele cted as the root. Enter a number 1 thro ugh 65535. Max A ge Max Age value is the number of se ...

  • Transition Networks MIL-SM808GPXX - page 105

    99 The priorit y and path cost can be configured for ea c h port. Click the Ap pl y button to modify the configuratio n . Parameter Descripti on Port Priority A ch ange to the Port Priority affects which p ort will be the root port. The lowest n umber has the highest priorit y . The range i s 0-255 and the default setting for all ports is 128. Path ...

  • Transition Networks MIL-SM808GPXX - page 106

    100 5-4-9. Port Mirroring The Port Mirroring f eature is disabled b y default. Selecting enab le from the pull down m enu will cause the se lected traffic f rom the selected monitor por ts to be mirrored to the selected anal ysis port. Press the Appl y button to submit the change s. Port Mirrori ng St ate: Enable s or disables the port mirro ring f ...

  • Transition Networks MIL-SM808GPXX - page 107

    101 5-4-10. SNMP SNMP is a protoco l that governs t he transf er of information be tween management and age nt. The switch supp orts SNMP V1. Any Ne twork Management station running th e Simple N etwork Manag ement Pro tocol (SNMP) ca n manage the switch provide d that the Management Inf ormation Base (MIB) is installed. Use this men u to defi ne m ...

  • Transition Networks MIL-SM808GPXX - page 108

    102 Read on ly: Enables req uests accompanied b y this string to d isplay MIB- object inf ormation. Read wr ite: Enables req uests accompanied b y this string to d isplay MIB- object inf ormation an d to set MIB o bjects. 3. T rap Manager A trap m anager is a manage ment station that rec eives traps. T raps are the system alerts generated by the sw ...

  • Transition Networks MIL-SM808GPXX - page 109

    103 5-4-1 1. Securit y Ma nager The user can chang e the user name and password to keep the switch secure. The def ault user name and password are be low . User Name: root Password : root ...

  • Transition Networks MIL-SM808GPXX - page 110

    104 5-4-12. TFTP Up date Fi rmware The f oll o wing menu opt ions prov ide some system con trol fu nctions to allow a user to updat e f irmware and remote ly boot the switch sy stem: • Executing TFT P software • Copy f irmware update v ersion image.b in to TFTP softw are director y . • In web manag ement select Administ rator— TFTP update f ...

  • Transition Networks MIL-SM808GPXX - page 111

    105 5-4-13- 2. TFTP Backup Confi guration Use this s creen to se t the TFTP ser ver IP address. Y ou can s ave current EEPROM value f rom here, then go to the TF TP Restore Configuration screen to restore the EEPROM value. ...

  • Transition Networks MIL-SM808GPXX - page 112

    106 5 -4-14. Reset S ystem Reset S witch to defau lt configur ation. 5-4-15. Reboot Select Reb oot to restart the syste m with the cur rent saved co nf i g uration. ...

  • Transition Networks MIL-SM808GPXX - page 113

    107 6. T echnical Specif ica tions This section provides the specif ications of MIL- SM808G s witch product. S tandards Complia nce IEEE 802.3u 100BA SE- FX Fast E thernet IEEE 802.3 z Gigabit Fiber Protocol CSMA/C D Max Forw arding and Max Filtering Rate 14,8800 p ps per Fast Etherne t port, 148,8000 p p s p er Gig abit Ethernet port (SF P) LED In ...

  • Transition Networks MIL-SM808GPXX - page 114

    108 Safet y UL, cUL ...

  • Transition Networks MIL-SM808GPXX - page 115

    109 7. T roubleshooti ng This section is intend ed to help you solve some co mmon pro blems encountered while u sing the MIL-S M808G switch series. Incorrect connecti ons  Faulty or loose cables Look fo r loose or obvious ly faulty conn ections. If they appear to be OK, make sure the connections are sn ug . If that do es not correct t he problem ...

  • Transition Networks MIL-SM808GPXX - page 116

    1 10 Diagnostic LE D Indicators The switch ca n be easily mon itored throug h panel indicators t o assist in identifying problems. If the power indicator does turn on when the power cord i s plugg ed in, you may have a pr oblem wit h power outl et or power cor d. Howeve r , if the switch po wers off after running for a while, check f or loose po we ...

  • Transition Networks MIL-SM808GPXX - page 117

    1 11  Cabling 100BASE-FX fiber port: Mult i-mode f iber connector t ypes mus t use 50/125 or 62.5/ 125 µ m mu lti-mode f iber cable. T wo devi ces may be connected ove r a 2 kilomet er distance. S ingle-mode f iber connect or types must us e 9/12 5 µ m single-m ode fiber cab le. T wo device s may be connected ove r a 15 o r 60 kilometer d ista ...

Fabricant Transition Networks Catégorie Switch

Les documents que nous recevons du fabricant de l'appareilTransition Networks MIL-SM808GPXX peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Transition Networks
- manuels d’utilisations MIL-SM808GPXX
- fiches produit Transition Networks
- dépliants
- ou étiquettes-énergie Transition Networks MIL-SM808GPXX
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Transition Networks MIL-SM808GPXX.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Transition Networks MIL-SM808GPXX, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Transition Networks MIL-SM808GPXX. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Transition Networks MIL-SM808GPXX.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Transition Networks MIL-SM808GPXX, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Transition Networks MIL-SM808GPXX par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Transition Networks MIL-SM808GPXX.

Le manuel d’utilisation complet Transition Networks, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Transition Networks MIL-SM808GPXX - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Transition Networks MIL-SM808GPXX, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lTransition Networks MIL-SM808GPXX qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Transition Networks MIL-SM808GPXX - qui devraient nous aider dans les premières étapes lors de l'utilisation Transition Networks MIL-SM808GPXX
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Transition Networks MIL-SM808GPXX
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Transition Networks MIL-SM808GPXX dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Transition Networks MIL-SM808GPXX?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Transition Networks MIL-SM808GPXX, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Transition Networks MIL-SM808GPXX il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)