Français dropdown-ico

Manuel d’utilisation RCA VPT 385

32 pages 1.74 mb
Télécharger

Aller à la page of 32

Summary
  • RCA VPT 385 - page 1

    VideoCassette Recorder Owner's Manual ...

  • RCA VPT 385 - page 2

    Wai, ranty Registration No other RCA Video Cassette Recorder has the same serial number as yours. It is important that you record the number and other vital information here, in case your VCR is stolen or in case you need a complete description for any other reason. You will find the model and serial numbers on the back of the VCR. You will also fi ...

  • RCA VPT 385 - page 3

    Using This Manual Congratulations on your choice of an RCA VCR. You have selected a high-quality, precision-engineered instrument designed to give you years of video and audio enjoyment, To get the best performance from your new VCR, it is important that you carefully read and follow the operating instructions in this manual in the sequence in whic ...

  • RCA VPT 385 - page 4

    Installation Unpacking When you unpack your new VCR, be sure you have removed all the accessories and information sheets. We recommend that you save the packing materials and box in case you ever need to ship or store your VCR. The accessories supplied for connecting your antenna, VCR, and TV set are shown here. The remote control unit and its batt ...

  • RCA VPT 385 - page 5

    Antenna Connections Disconnect Existing Antenna from TV and Connect it to VCR. • (Your antenna connections will probably resemble those in one of the diagrams on this page.) A. B! 1. If your existing antenna is connected to your TV like this: CASLe(S) BACK FROM OF TV , Disconnect the antenna from your TV and connect it to your VCR like this: FROM ...

  • RCA VPT 385 - page 6

    Antenna Connections (Continued) 2. Connect VCR to back of TV. (The antenna connections on the back of your TV will probably resemble those in one of the diagrams below,) A. |. If the antenna connection on the back of ,our TV looks like this: @ _ @v VHF _ I_ 3P ®_ _H UHF _ F OR @@ @@] VHF UHF BACK OF TV 2. Connect the VCR to your TV like this: BACK ...

  • RCA VPT 385 - page 7

    Cable- TV Connections Your VCR is designed to receive unscrambled cable channels 1 through 48 plus 98 and 99 without a "converter box". (These channels are sometimes designated 2 through 13, A through W, W+ 1 through W+I2, A-2, A-I and A-8.) IF YOUR THEN USE "IV IS: DIAGRAM(S): A cable-compatible not cable-compatible AND YOUR CABLE-T ...

  • RCA VPT 385 - page 8

    Cable- TV Connections (continued) C. When you use these connections the A*B switch is used to select either the converter output or the VCR output. This arrangement will let you use your VCR G) Disconnect Cable-TV from converter. (_) Disconnect TV from converter cable. @ Connect Cable-TV to input of splitter. CONVERTER BOX FROM ,,,_, CABLE I - TV I ...

  • RCA VPT 385 - page 9

    TV Monitor/Receiver Connections - Direct Video and Audio Connections Connecting the video output and audio output jacks of your VCR to the corresponding video and audio input jacks of your TV monitor/receiver may produce a slightly better picture during playback. This "direct" signal connection bypasses the TV tuner during playback. FROM ...

  • RCA VPT 385 - page 10

    What Your VCR Will Do Broadcast/Cable Frequency-Synthesis Tuner Provides accurate selection of VHF/UHF or up to 50 unscrambled cable channels.* Quartz-controlled electronics automatically lock the system onto the signal, eliminating the need for fine tuning. Bright, easy- to-read channel display. *Local systems may vary; check your cable company&ap ...

  • RCA VPT 385 - page 11

    Video Cassettes RCA recommends that RCA cassettes be used with this unit. The tape in RCA cassettes is of high-quality formulation, intended for use with multi-speed VHS video cassette recorders. It has been manufactured to RCA's critical specifications for excellent performance with RCA VCR's. Use of tape not meeting these specifications ...

  • RCA VPT 385 - page 12

    Basic Operation Basic Operating Controls and DispLays Now that you have connected your VCR to your TV and antenna or cable-TV system, you are ready to turn it on. You don't need to know all the details about the controls and display before you begin using your new VCR. so only, those you will use for basic recording and playback are discussed ...

  • RCA VPT 385 - page 13

    Basic Operation (continued) Turning on Your VCR for the First Time-- When you have finished connecting the cables to your antenna and TV, plug in the VCR's power cord and press POWER. The light above the STOP button should come on. If it flashes, too much moisture has collected inside the unit for it to operate. Leave the VCR turned on until t ...

  • RCA VPT 385 - page 14

    Basic Operation (continued) Setting Your "IV to the VCR Channel The "VCR Channel" is the TV channel you use for viewing what the VCR is recording or playing, and for viewing the signal from the VCR tuner when it is stopped. Your TV must be set to this channel, and the light above the VCR/TV switch on your VCR must be on. Selecting th ...

  • RCA VPT 385 - page 15

    Remote Control Before you use the remote control unit supplied with your VCR, install the batteries (instructions below). Several of the remote's buttons do the same things as buttons with the same names on the front of your VCR. and you can use whichever one is more convenient at the moment. The remote control has additional buttons for contr ...

  • RCA VPT 385 - page 16

    Setting the Clock Here are some things you should know before you set the clock: • When you first plug in your VCR, the clock will read • The buttons for setting the clock are on the remote hand unit. • While you are setting the clock, the display on the VCR will prompt you through the procedure. • If you press a wrong digit, press CLEAR re ...

  • RCA VPT 385 - page 17

    First Recording and Playback This page gives the basic steps for recording and playback. You should practice them until you can do them without referring to the manual. To save time, we suggest you record for only two or three minutes. The first drawing shows how to make a recording and the second one shows how to play it back and turn off the VCR. ...

  • RCA VPT 385 - page 18

    Operating Controls (Detailed Descriptions) The uses of the controls for basic operation are given on page 10. Now that you are familiar with the basic procedure for recording a TV program and playing it back. you are ready to learn the rest of the control functions. The controls of your VCR are designed so that: • Accidentally pressing a wrong bu ...

  • RCA VPT 385 - page 19

    button when the VCR is playing. Picture Search is explained on the next page. STOP: The STOP button will stop the normal functions of Record, Play, Rewind and Fast Forward and the SpeicaI-Effects functions described below and next page. RECORD: Press the RECORD button to start recording when the VCR is stopped. @ COUNTER: Press this button once to ...

  • RCA VPT 385 - page 20

    Special Effects and Features (continued) • Frame Advance is designed for use at the SLP speed. It may be used on tapes recorded at other speeds, but the picture quality will not be as good as that at SLP. Slow Motion • If a tape is playing, press SLOW on the remote control to begin slow-motion viewing. When you are using Stop-Action viewing (Pa ...

  • RCA VPT 385 - page 21

    Quick Reference Guides Normal TV Viewing Follow the two steps in the drawing for normal TV viewing. To view UHF stations, just tune your TV to the channel, regardless of what the VCR is doing. If you have a TV Monitor/Receiver and the VCR's audio and video outputs are connected to it, switch the TV to "Tuner Input" and select the cha ...

  • RCA VPT 385 - page 22

    Quick Reference Guides (continued) Recording and Viewing Different Programs _I, NSERT CASSETTE VCR LIGHT OFF SET SPEED SET TO TUNER , / /' / (7_OPERATE TV AS USUAL _RESS RECORD @SELECT CHANNEL STOP WHEN FINISHED Note: If you ',','ant to view what is being recorded, press the VCR/TV switch to turn on the light and then tune your ...

  • RCA VPT 385 - page 23

    Recording from Another VCR To copy (dub) tapes, connect the two VCR's as shown below. Use shielded audio/video cables (such as RCA =AH002 or =AH005). The connections from the recording VCR to your TV are the ones you normally use. h is preferable to play the original tape on the same machine that was used to record it. CAUTION: The unauthorize ...

  • RCA VPT 385 - page 24

    Camera Recording In addition to the camera itself, you will need a Camera AC Power Supply (such as RCA Model CPS03 for use with RCA cameras). Plug the camera cable into the power supply and then connect the cables from the power supply to the VCR as the drawing shows. The connections from the VCR to your TV are the same ones you normally use. To st ...

  • RCA VPT 385 - page 25

    Express Recording Express Recording (XPR) lets you record up to four hours without programming the timer. It also allows you to start (or continue) recording immediately or to delay recording up to 24 hours. When the recording is finished, the VCR will turn off automatically. Note: Although you do not have to program the timer, the clock must be se ...

  • RCA VPT 385 - page 26

    Programming the Timer The programmable clock/timer permits unattended recording of up to four different TV programs. The timer is actually a small computer which will turn on the VCR at the time you select, record for a selected length of time, and then turn off the VCR... all automatically without you being there. You can program the timer to do t ...

  • RCA VPT 385 - page 27

    Programming the Timer (continued) f 151 The display will prompt you to select either AM or PM. ON C" J--I [] NORM I Press "1'" for AM or "2" for PM. The display will prompt you to select the [6] stopping time. ,,I/ AM I"_ J..._[ OFF -- ,..CH Jl,.,,,.I /1" ] NORM Press four digits, two for the hour and two mor ...

  • RCA VPT 385 - page 28

    Timer Recording The information on this page tells you how to set up your VCR for Timer Recording after you have programmed the timer. (The programming instructions are on pages 24-25.) When you have finished programming the timer, follow the steps in the drawing to prepare for timer recording. We suggest that you make one or more short timer recor ...

  • RCA VPT 385 - page 29

    Alternate Remote Control Units Selected models of RCA color TV receivers and monitor/receivers feature infrared hand units that will also remotely control your VCR. Only the buttons that are used for controlling your VCR are described here. These buttons have generally the same functions as the ones with the same names on the front panel of the VCR ...

  • RCA VPT 385 - page 30

    Cabinet Cleaning Cleaning Dust exposed surfaces as required, using a soft cloth or the dusting attachment of your vacuum cleaner. Occasionally use the vacuum cleaner to remove dust from the ventilation holes on the top, back, sides, and bottom of the cabinet. Some of the plastic surfaces are easily scratched and they can be marred by alcohol and va ...

  • RCA VPT 385 - page 31

    Index A/B Switch ...................... 6 Accessories (Included) ............ 2 ADD Button .................... I 1 Adding Channels to Scan List .... 11 Alternate Remote Controls ....... 27 Antenna Connection ........... 2,3,4 AUTO PROG Button ............ 11 Basic Operation ................. 10 Basic Playback (Quick Guide) .... 20 Battery Installa ...

  • RCA VPT 385 - page 32

    Specifications Format VHS Reeord/Playback System: 3-Head: 2 video record/ playback heads, l special effects head Video Signal: EIA standard: NTSC color Antenna 75-ohm external VHF antenna terminal 300-ohm external UHF antenna Tuner 120-channel Type Frequency synthesis Broadcast Channels: VHF 2 - 13, UHF 14 - 83 Cable-TV Channels: Power Requirements ...

Fabricant RCA Catégorie VCR

Les documents que nous recevons du fabricant de l'appareilRCA VPT 385 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques RCA
- manuels d’utilisations VPT 385
- fiches produit RCA
- dépliants
- ou étiquettes-énergie RCA VPT 385
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation RCA VPT 385.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation RCA VPT 385, manuels d’entretien, brefs manuels ou manuels de l’utilisateur RCA VPT 385. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit RCA VPT 385.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil RCA VPT 385, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser RCA VPT 385 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs RCA VPT 385.

Le manuel d’utilisation complet RCA, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel RCA VPT 385 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières RCA VPT 385, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lRCA VPT 385 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil RCA VPT 385 - qui devraient nous aider dans les premières étapes lors de l'utilisation RCA VPT 385
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de RCA VPT 385
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service RCA VPT 385 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de RCA VPT 385?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec RCA VPT 385, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec RCA VPT 385 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)