Français dropdown-ico

Manuel d’utilisation Intel 100BASE-TX

59 pages 0.49 mb
Télécharger

Aller à la page of 59

Summary
  • Intel 100BASE-TX - page 1

    Intel Express 100BASE-TX Stackable Hub User Guide ...

  • Intel 100BASE-TX - page 2

    ...

  • Intel 100BASE-TX - page 3

    iii © 1995 by Intel Corporation. All rights reserved. †Other brand and product names are registered trademarks or trademarks of their respective holders. Statement of Conditions In the interest of improving internal design, operational function, or reliability, Intel Corp. reserves the right to make changes to the products described in this docu ...

  • Intel 100BASE-TX - page 4

    iv Certificate of the Manufacturer/Importer It is hereby certified that the 100BASE-TX Stackable Hub has been suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test transmitters) in accordance with the regulations may, however, be subject to certain res ...

  • Intel 100BASE-TX - page 5

    v Limited 1-year hardware warranty Intel warrants to the original owner that the hardware product delivered in this package will be free from defects in material and workmanship. This warranty does not cover the product if it is damaged in the process of being installed or improperly used. THE ABOVE WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHE ...

  • Intel 100BASE-TX - page 6

    ...

  • Intel 100BASE-TX - page 7

    i Contents Chapter 1 Overview .................................................... 1 Features............................................................................................... 1 Physical Description........................................................................... 2 Chassis ..................................................... ...

  • Intel 100BASE-TX - page 8

    ii Appendix A Technical Specifications and Optional Equipment ................................................ 33 Technical Specifications .................................................................. 33 Optional Equipment ......................................................................... 35 Media Adapters .............................. ...

  • Intel 100BASE-TX - page 9

    1 Overview This chapter introduces the Intel Express 100BASE-TX stackable hub and covers the following topics: • A summary of the key features of the Express hub • A physical description of the Express hub and its components • A description of the upcoming optional equipment supported by the Express hub Features The key features of the Expres ...

  • Intel 100BASE-TX - page 10

    C H A P T E R 1 Intel Express 100BASE-TX St ackable Hub 2 – 100BASE-T Media adapter slot to accommodate an optional media adapter that allows the repeater to be connected to other 100BASE-T network devices. – MDI/MDI-X push-button switch that allows 100BASE-T port 1 to be configured to connect to a 100BASE-T switch or other 100BASE-T internetwo ...

  • Intel 100BASE-TX - page 11

    CHAPTER 1 O v e r v i e w 3 Chassis The Express hub components are enclosed in a 19-inch (48.26- centimeter) wide chassis, which is 1.5 EIA rack-mount spaces high. The chassis consists of a metal frame and a plastic front panel, and it contains components that are pertinent to the operation of the hub. Cover Motherboard Fans Power supply Front p ...

  • Intel 100BASE-TX - page 12

    C H A P T E R 1 Intel Express 100BASE-TX St ackable Hub 4 Front Panel The front panel of the Express hub provides 12 100BASE-T ports, an MDI/MDI-X switch, an LED matrix, a media adapter slot, and an expansion slot. Pwr Stat RPS Col Data % Expansion Slot 1 1 13 2 14 3 15 4 16 5 17 6 18 7 19 8 20 9 21 10 22 11 23 12 Mstr Stat Enbl Stat 24 Port Status ...

  • Intel 100BASE-TX - page 13

    CHAPTER 1 O v e r v i e w 5 The maximum cable distance between the port and the attached device is 100 meters (328 feet), including all patch cables, panels, and connectors. MDI/MDI-X Switch The MDI/MDI-X switch on the front panel of the Express hub is a recessed push-button switch that allows you to select MDI or MDI-X wiring for port 1. As indica ...

  • Intel 100BASE-TX - page 14

    C H A P T E R 1 Intel Express 100BASE-TX St ackable Hub 6 This shows the LED matrix on the Express hub. Pwr Stat RPS Col Data % Expansion Slot 1 1 13 2 14 3 15 4 16 5 17 6 18 7 19 8 20 9 21 10 22 11 23 12 Mstr Stat Enbl Stat 24 Port Status Media Adapter Management 1 5 10 20 35 50 100BASE-T Hub 5897 LED matrix on the Express hub Type Label Color Mea ...

  • Intel 100BASE-TX - page 15

    CHAPTER 1 O v e r v i e w 7 Type Label Color Meaning 100BASE-T Media adapter status Media Adapter 1 Green Amber Off A media adapter is installed in the media adapter slot, link status is good, and the port is not partitioned. Link status is good and the port is partitioned. Link status is not detected or a media adapter is not installed in the medi ...

  • Intel 100BASE-TX - page 16

    C H A P T E R 1 Intel Express 100BASE-TX St ackable Hub 8 100BASE-T Media Adapter Slot The media adapter slot is located in the upper left-hand corner of the Express hub and accommodates an optional 100BASE-T media adapter. A 100BASE-T media adapter allows you to connect to other 100BASE-T network devices using a different media. 5906 Media adapter ...

  • Intel 100BASE-TX - page 17

    CHAPTER 1 O v e r v i e w 9 Rear Panel The rear panel of the Express hub provides an AC power receptacle, a Redundant Power connector, and two cascade cable connectors. 5898 Redundant Power 100-240V 5.0-3.0A 47-63HZ Cascade Down Cascade Up Unit Position 1 2 3 Rear panel of the Express hub Power Receptacle The AC power receptacle is prov ...

  • Intel 100BASE-TX - page 18

    C H A P T E R 1 Intel Express 100BASE-TX St ackable Hub 10 The cascade cable extends the functionality of one hub to a maximum of six hubs in a stack. This stack then functions as a single repeater or collision domain. The cascade cable daisy chain creates a cascade bus that carries the following information to each hub in the stack: • Multidrop ...

  • Intel 100BASE-TX - page 19

    11 Installing and Removing the Express Hub This chapter describes • Preparing the installation site. • Unpacking the equipment. • Meeting tool and materials requirements. • Installing the hub. • Installing multiple hubs. • Removing a hub. • Installing and removing filler panels. NOTE Only qualified technicians should install and maint ...

  • Intel 100BASE-TX - page 20

    C H A P T E R 2 Intel Express 100BASE-TX St ackable Hub 12 Site Preparation Before you install the Express hub, prepare the installation site. Make sure the operating environment meets the physical requirements of the equipment. Operating environment Requirement Temperature Ambient temperature between 5° C and 40° C (41° F and 104° F) No nearby ...

  • Intel 100BASE-TX - page 21

    C H A P T E R 2 Installi ng and Removing the Express Hub 13 Package Contents Before you install the Express hub, check to see that you have these items: Screws & Feet 5907.1 Power cord 100BASE-T hub 10 bracket screws, 4 rack screws with nylon washers 2 mounting brackets User guide Intel Express 100BASE-TX Stackable Hub Technology by ...

  • Intel 100BASE-TX - page 22

    C H A P T E R 2 Intel Express 100BASE-TX St ackable Hub 14 Installing an Express hub This section provides information and instructions for installing a single Express hub in a rack or on a table or shelf. For instructions on installing multiple Express hubs, see “Installing Multiple Hubs” later in this chapter. Installing the Hub in a Rack To ...

  • Intel 100BASE-TX - page 23

    C H A P T E R 2 Installi ng and Removing the Express Hub 15 3. Insert two pan-head screws with nylon washers through each mounting bracket and into the rack. 4. Using a #2 Phillips screwdriver, tighten the screws to secure the hub to the rack. 5. Continue with “Completing the Installation” to finish this installation procedure. Installing the H ...

  • Intel 100BASE-TX - page 24

    C H A P T E R 2 Intel Express 100BASE-TX St ackable Hub 16 2. Install any optional modules in the media adapter and/or expansion slots in the hub. a. Remove the filler panel from the slot. For instructions on removing filler panels, see “Installing and Removing Filler Panels” later in this chapter. b. Install the module in the appropriate slot. ...

  • Intel 100BASE-TX - page 25

    C H A P T E R 2 Installi ng and Removing the Express Hub 17 Installing Multiple Hubs This section describes building a stack of Express hubs. Included in this section are the guidelines for stacking and cascading Express hubs and the physical requirements for installing multiple hubs. Review the guidelines and requirements before installing your eq ...

  • Intel 100BASE-TX - page 26

    C H A P T E R 2 Intel Express 100BASE-TX St ackable Hub 18 Mounting Requirements for Installing Multiple Hubs Position the hub you want to be numbered 1 at the top of the stack. When an NMM is installed in the stack, it assigns unit numbers starting from the top of the stack. For information about the unit numbering convention, see “Unit Numberin ...

  • Intel 100BASE-TX - page 27

    C H A P T E R 2 Installi ng and Removing the Express Hub 19 Installing and Connecting Multiple Hubs The procedure for installing and connecting multiple hubs is similar for rack installations and table or shelf installations. When installing multiple hubs, follow this sequence: • Install the hubs. • Connect the hubs together using the cascade c ...

  • Intel 100BASE-TX - page 28

    C H A P T E R 2 Intel Express 100BASE-TX St ackable Hub 20 d. Tighten the screw locks on the cable connectors to secure the plug to the hub. e. Repeat steps a through d for all the hubs in the stack. 3. Connect the power cords to the AC power receptacles on the rear panel of all the hubs in the stack. Connect the power cord to the AC power receptac ...

  • Intel 100BASE-TX - page 29

    C H A P T E R 2 Installi ng and Removing the Express Hub 21 For hubs that are mounted on a rack, you may have to remove the inoperable hub from the stack and move the adjacent hub up one rack mounting space, or install a replacement hub in the rack, before connecting the cascade cable to the new hub. For hubs that are mounted on a table or shelf, r ...

  • Intel 100BASE-TX - page 30

    C H A P T E R 2 Intel Express 100BASE-TX St ackable Hub 22 To remove a filler panel, loosen the screws on the front of the filler panel, grasp the tab on the front of the panel, and pull the filler panel out of the slot. 5914 Technology by Bay Networks Intel 100BASE Removing a filler panel To install a filler panel, follow these steps: 1. Align ...

  • Intel 100BASE-TX - page 31

    23 Physical Configuration Guidelines This chapter describes • Making connections to ports on the Express hub. • Verifying the installation. • The unit numbering convention. • Typical 100BASE-T network configurations. Making Connections to 100BASE-T Ports This section provides the information you need to know before you connect cables to the ...

  • Intel 100BASE-TX - page 32

    C H A P T E R 3 Intel Express 100BASE-TX St ackable Hub 24 Network Configuration Decisions Before connecting your network devices to the ports on the Express hub, make sure you have made the following network configuration decisions: • Ensure that the new connections are within the simple Fast Ethernet repeater rules. • Ensure that all 100BASE- ...

  • Intel 100BASE-TX - page 33

    C H A P T E R 3 Physical Configurati on Guidelines 25 Connecting Cables to the Hub You can connect devices directly to ports on the Express hub, or to ports on installed media adapter and host modules. This illustration shows how to connect UTP or STP cable to RJ-45 connectors and fiber optic cable to SC connectors. 5919.1  UTP or STP cable c ...

  • Intel 100BASE-TX - page 34

    C H A P T E R 3 Intel Express 100BASE-TX St ackable Hub 26 Verifying Installation After you complete all port and power connections to the Express hub, verify that the installation is successful by observing the LEDs on the front panel of the hub. This section provides information about the operating conditions of the LEDs after power is first appl ...

  • Intel 100BASE-TX - page 35

    C H A P T E R 3 Physical Configurati on Guidelines 27 • If an optional module is installed in the expansion slot, the Expansion Slot Stat LED lights green to indicate the module in the expansion slot has passed the confidence test and is operating normally. • If an optional NMM is installed in the expansion slot, the Management LEDs light as fo ...

  • Intel 100BASE-TX - page 36

    C H A P T E R 3 Intel Express 100BASE-TX St ackable Hub 28 Unit Numbering Convention This section provides information about the hub unit numbering convention. The unit numbering convention is invoked when an NMM is installed in one of the Express hubs in a stack. When Express hubs are stacked, cascaded, and powered, they are assigned “unit” nu ...

  • Intel 100BASE-TX - page 37

    C H A P T E R 3 Physical Configurati on Guidelines 29 In a stack of four hubs, if you remove a hub that is assigned unit 2 and connect the cascade cable of unit 1 to unit 3, the hub that was assigned unit 3 will reset and be renumbered as unit 2. 100BASE-T Network Configurations This section provides information about the typical 100BASE-T network ...

  • Intel 100BASE-TX - page 38

    C H A P T E R 3 Intel Express 100BASE-TX St ackable Hub 30 Connecting 100BASE-T Workstations to the Hub You can connect up to 12 workstations to 12 fixed ports with RJ-45 connectors on the Express hub, provided that the workstations are configured to operate at 100 Mbps (see “100 Mbps Network Devices” earlier in this chapter). This illustration ...

  • Intel 100BASE-TX - page 39

    C H A P T E R 3 Physical Configurati on Guidelines 31 100BASE-T Switched LAN Integrating switching into the network enables network microsegmentation, which increases the total capacity and performance of the network. You can add 100 Mbps workgroups to the network and connect them to individual ports on the switch. For those networks that still sup ...

  • Intel 100BASE-TX - page 40

    C H A P T E R 3 Intel Express 100BASE-TX St ackable Hub 32 By integrating the switching hub into the network that populates both 10 Mbps and 100 Mbps workstations, both groups experience the benefits of high-speed networking, even if they are not operating at the faster data transmission speed—both groups receive dedicated bandwidth (10 Mbps or 1 ...

  • Intel 100BASE-TX - page 41

    33 Appendix A: Technical Specifications and Optional Equipment This appendix provides technical specification for the Express 100BASE-TX stackable hub. It also describes optional equipment supported by the Express hub. Technical Specifications Network Protocol and Standards Compatibility IEEE 802.3u 100BASE-T Data Rate TX: 100 Mbps with 4B/5B codin ...

  • Intel 100BASE-TX - page 42

    APPENDIX A I n t e l E x p r e s s 100BASE-TX Stackabl e Hub 34 Physical Specifications Dimensions: 11.18 (l) by 17.25 (w) by 2.57 (h) in 28.40 (l) by 43.82 (w) by 6.53 (h) cm Weight: 10.0 lbs (4.5 kg) with filler panels installed 12.3 lbs (5.6 kg) with an NMM and a media adapter installed (optional equipment) Environmental Specifications Operating ...

  • Intel 100BASE-TX - page 43

    APPENDIX A T e c h n i c a l S p e c ifications and Optional Equipment 35 Interface Options RJ-45 connectors for Category 5 UTP (2-pair wire) and 100-ohm STP (2-pair wir e) 100BASE-TX Ethernet interface Fiber optic SC connectors for 100BASE-FX Ethernet interface with installed 100BASE-FX media adapter Optional Equipment The Express hub offers two s ...

  • Intel 100BASE-TX - page 44

    APPENDIX A I n t e l E x p r e s s 100BASE-TX Stackabl e Hub 36 Network Management Module The 100BASE-T NMM fits into the expansion slot and allows you to extend per-port advanced Simple Network Management Protocol (SNMP) management functions to each Express hub in your stack. Advanced SNMP management allows you to: • View configuration and statu ...

  • Intel 100BASE-TX - page 45

    APPENDIX A T e c h n i c a l S p e c ifications and Optional Equipment 37 You can install up to six 100BASE-TX Host Modules in an unmanaged stack to provide you with 144 ports per Fast Ethernet segment. In a managed stack, you can install up to five host modules to provide you with 132 ports per Fast Ethernet segment. For instructions on how to ins ...

  • Intel 100BASE-TX - page 46

    ...

  • Intel 100BASE-TX - page 47

    39 Appendix B: 100BASE-T Topology Rules and Guidelines This appendix describes • 100BASE-T physical layer media specifications • Repeater rules For a complete explanation of the set of 100BASE-T rules and guidelines, refer to the Institute of Electronics Engineers (IEEE) 100BASE-T 802.3u standard. For information about cables for Ethernet netwo ...

  • Intel 100BASE-TX - page 48

    APPENDIX B I n t e l E x p r e s s 100BASE-TX Stackabl e Hub 40 The following table lists the cable and connector types and the coding scheme that each media specification uses: Media specification Cable type(s) Connector type(s) Coding scheme 100BASE-TX Cat. 5 UTP (2-pair wire) RJ-45 4B/5B 100-ohm STP (2-pair wire) RJ-45 100BASE-FX 62.5/125 micron ...

  • Intel 100BASE-TX - page 49

    APPENDIX B 100BASE-T Topology Rules and Guidelines 41 This table lists the maximum diameter of Class I repeater collision domains when copper, fiber, and mixed copper and fiber media types are used: Repeater Model Copper links only Fiber links only Multiple copper links (TX) & one fiber link (FX) ✝ ✝ Multiple copper links (T4) & one fib ...

  • Intel 100BASE-TX - page 50

    APPENDIX B I n t e l E x p r e s s 100BASE-TX Stackabl e Hub 42 100BASE-T workstations  100BASE-T workstations  Stack of 100BASE-T hubs Stack of 100BASE-T hubs 100BASE-TX Switching hub Wiring closet 400 m total network topology 400 m total network diameter 100 meter Category 5 UTP 5872.1 Collision domain 1 Collision domain 2 ...

  • Intel 100BASE-TX - page 51

    APPENDIX B 100BASE-T Topology Rules and Guidelines 43 100BASE-T workstations  100BASE-T workstations  Stack of 100BASE-T hubs Stack of 100BASE-T hubs 100BASE-TX switching hub Wiring closet 521.6 m total network topology 100 meter Category 5 UTP 160.8 meter fiber 5872.2 Collision domain 1 Collision domain 2 160.8 m 160.8 m 10 ...

  • Intel 100BASE-TX - page 52

    APPENDIX B I n t e l E x p r e s s 100BASE-TX Stackabl e Hub 44 100BASE-T workstations  100BASE-T workstations  Stack of 100BASE-T hubs Stack of 100BASE-T hubs Stack of 100BASE-T hubs Stack of 100BASE-T hubs 100BASE-TX switching hub 100BASE-TX switching hub 100 meter Category 5 UTP 160.8 meter fiber c ...

  • Intel 100BASE-TX - page 53

    APPENDIX B 100BASE-T Topology Rules and Guidelines 45 After you calculate values for each network device in the path, use these values to determine the PDV for all paths in your network. If your path delays exceed 512 bit times, your network may suffer from late collisions or cyclic redundancy check (CRC) errors. To calculate the worst case PDV, fo ...

  • Intel 100BASE-TX - page 54

    APPENDIX B I n t e l E x p r e s s 100BASE-TX Stackabl e Hub 46 2. Add the LSDVs for all the segments in the path. 3. Determine the delay for each repeater in the path. Repeater delay values are specified in bit times. The default maximum repeater delay value for a Class 1 repeater is 140 bit times. There is a one repeater maximum for networks usin ...

  • Intel 100BASE-TX - page 55

    47 Index 100 Mbps adapter cards, 24, 30 workgroups, 31 100BASE-FX Media Adapter description, 35 in media adapter slot, 8 installation guidelines, 18 network configuration, 31 100BASE-FX media specification, 40 100BASE-T network configurations 100BASE-T shared LAN, 29 100BASE-T switched LAN, 31 100BASE-T network devices, 24–25 100BASE-T network to ...

  • Intel 100BASE-TX - page 56

    INDEX 48 chassis, internal components, 3 Class I and Class II repeaters, 40 Class I repeater collision domains, 41 coding schemes, media specifications, 40 Col LED, operating conditions, 6 collision domains, Class I repeaters, 41 confidence test, 26 configuring network devices, 24 connecting cables to 100BASE-T ports, 25 customer support, 51 D – ...

  • Intel 100BASE-TX - page 57

    INDEX 49 Expansion Slot Stat operating conditions, 7 verifying installation, 27 Management Mstr verifying installation, 27 Management Stat operating conditions, 7 verifying installation, 27 Media Adapter 1 operating conditions, 7 verifying installation, 26 Port Status operating conditions, 7 verifying installation, 27 Pwr operating conditions, 6 re ...

  • Intel 100BASE-TX - page 58

    INDEX 50 removing filler panels, 22 hub rack installations, 21 table or shelf installations, 21 mounting brackets, 21 repeater delay values, 46 repeater rules for Class I repeaters, 40 requirements filler panels, 21 installation tools, 13 restrictions, power cords, 15–16, 19 RJ-45 connectors 100BASE-TX host module, 36 connecting cable, 25 hub fro ...

  • Intel 100BASE-TX - page 59

    51 Intel customer support Internet FTP and World Wide Web Download files or other information from Intel’s World Wide Web site or by anonymous FTP. CompuServe* Intel Forum. Must be a CompuServe subscriber. Dial in by modem (7-E- 1, up to 28.8Kbps). Intel BBS Connect to Intel’s bulletin board service. Dial in by modem (8- N-1, up to 14.4Kpbs). F ...

Fabricant Intel Catégorie Switch

Les documents que nous recevons du fabricant de l'appareilIntel 100BASE-TX peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Intel
- manuels d’utilisations 100BASE-TX
- fiches produit Intel
- dépliants
- ou étiquettes-énergie Intel 100BASE-TX
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Intel 100BASE-TX.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Intel 100BASE-TX, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Intel 100BASE-TX. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Intel 100BASE-TX.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Intel 100BASE-TX, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Intel 100BASE-TX par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Intel 100BASE-TX.

Le manuel d’utilisation complet Intel, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Intel 100BASE-TX - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Intel 100BASE-TX, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lIntel 100BASE-TX qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Intel 100BASE-TX - qui devraient nous aider dans les premières étapes lors de l'utilisation Intel 100BASE-TX
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Intel 100BASE-TX
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Intel 100BASE-TX dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Intel 100BASE-TX?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Intel 100BASE-TX, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Intel 100BASE-TX il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)