Manuel d’utilisation Lexmark X790

16 pages 0.81 mb
Télécharger

Aller à la page of 16

Summary
  • Lexmark X790 - page 1

    X790 Series Maintenance Guide August 2011 www.lexmark.com ...

  • Lexmark X790 - page 2

    Contents Maintaining the printer ................................................................................3 Cleaning the exterior of the printer .......................................................................................................... 3 Cleaning the scanner glass .............................................................. ...

  • Lexmark X790 - page 3

    Maintaining the printer Periodically, certain tasks are required to maintain optimum print quality. Cleaning the exterior of the printer 1 Make sure that the printer is turned off and unplugged from the wall outlet. CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer, unplug the power cord from the ...

  • Lexmark X790 - page 4

    Cleaning the scanner glass Clean the scanner glass if you encounter print quality problems, such as streaks on copied or scanned images. 1 Slightly dampen a soft, lint-free cloth or paper towel with water. 2 Open the scanner cover. 1 White underside of the ADF cover 2 White underside of the scanner cover 3 Scanner glass 4 ADF glass 3 Wipe the areas ...

  • Lexmark X790 - page 5

    4 Open the bottom ADF door. 5 Wipe the ADF scanner glass under the ADF door. 6 Close the bottom ADF door. 7 Close the scanner cover. Cleaning the ADF parts Clean the ADF parts periodically to maintain optimal printing performance. Residue on the ADF parts may cause print quality issues and false 280–299 paper jam messages. 1 Turn the printer off. ...

  • Lexmark X790 - page 6

    4 Remove the pick roller assembly. 5 Wipe the surface of both pick rollers. 6 Replace the pick roller assembly. 7 Wipe the entire surface under the ADF cover. 8 Close the ADF cover. Maintaining the printer 6 ...

  • Lexmark X790 - page 7

    Cleaning the printhead lenses Clean the printhead lenses when you encounter print quality problems. 1 Open the front door. 2 Remove all print cartridges. Warning—Potential Damage: Do not touch the shiny area on the photoconductor drum. Doing so can damage the photoconductor. 3 Locate the four printhead lenses. 4 Clean the lenses using compressed ...

  • Lexmark X790 - page 8

    6 Close the front door. Storing supplies Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them. Do not expose supplies to: • Direct sunlight • Temperatures above 35°C (95°F) • High humidity above 80% • Salty air • Corrosive gases • Heavy dust ...

  • Lexmark X790 - page 9

    Ordering supplies To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place where you purchased the printer. Notes: • The toner gauge is an estimate of how much toner is l ...

  • Lexmark X790 - page 10

    Ordering a waste toner bottle When 82 Waste toner bottle nearly full appears, order a replacement waste toner bottle. When 82 Replace waste toner bottle appears, replace the waste toner bottle. Note: Waste toner bottle reuse is not recommended. Part name Part number Waste toner bottle C792X77G Ordering staple cartridges When Staples Low or Staples ...

  • Lexmark X790 - page 11

    Replacing supplies Replacing a print cartridge 1 Open the front door. 2 Lift the green handle and pull the print cartridge. Grasp the top handle and lift the cartridge out of the machine. 3 Place the old cartridge in the replacement cartridge shipping box, and then attach the return label to the box for shipping. Maintaining the printer 11 ...

  • Lexmark X790 - page 12

    4 Unpack a new print cartridge. Warning—Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print quality of future print jobs. 5 Shake the new cartridge front ‑ to ‑ back and side ‑ to ‑ side to evenly distribute the toner. Maintaining the printer 12 ...

  • Lexmark X790 - page 13

    6 Remove the red packing strip from the new cartridge. 7 Insert the new cartridge into the printer, and then push the green handle back in place. Note: Make sure the cartridge is fully pushed in. 8 Close the front door. Maintaining the printer 13 ...

  • Lexmark X790 - page 14

    Replacing the waste toner bottle Replace the waste toner bottle when 82.xx Replace waste toner bottle appears. The printer will not continue printing until the waste toner bottle is replaced. 1 Remove the replacement waste toner bottle from its shipping box, and then unpack it. 2 Open the printer front door, and then open tray 1. 3 Pull the green t ...

  • Lexmark X790 - page 15

    6 Peel the recycling label off, and place it on the shipping box. 7 Insert the new waste toner bottle into the printer. 8 Close tray 1, and then close the front door. Moving the printer Before moving the printer CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. ...

  • Lexmark X790 - page 16

    Moving the printer to another location The printer and options can be safely moved to another location by following these precautions: • Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any cart used to move the options must have a surface able to support the dimensions of the options. • K ...

Fabricant Lexmark Catégorie Printer

Les documents que nous recevons du fabricant de l'appareilLexmark X790 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Lexmark
- manuels d’utilisations X790
- fiches produit Lexmark
- dépliants
- ou étiquettes-énergie Lexmark X790
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Lexmark X790.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Lexmark X790, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Lexmark X790. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Lexmark X790.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Lexmark X790, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Lexmark X790 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Lexmark X790.

Le manuel d’utilisation complet Lexmark, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Lexmark X790 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Lexmark X790, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lLexmark X790 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Lexmark X790 - qui devraient nous aider dans les premières étapes lors de l'utilisation Lexmark X790
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Lexmark X790
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Lexmark X790 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Lexmark X790?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Lexmark X790, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Lexmark X790 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)