Manuel d’utilisation Sennheiser EM 3532-U

35 pages 7.33 mb
Télécharger

Aller à la page of 35

Summary
  • Sennheiser EM 3532-U - page 1

    Instructions for use EM 3532-U ...

  • Sennheiser EM 3532-U - page 2

    38 ...

  • Sennheiser EM 3532-U - page 3

    39 Chapter Contents ............................................................................................................................. Page 1 Brief description, special features ........................................................................... 40 2 Connections and operating elements ............................................. ...

  • Sennheiser EM 3532-U - page 4

    40 Thank you for choosing Sennheiser! W e have designed this pr oduct to give y ou reliable operation o ver man y years. Please take a few moments to r ead these instructions carefully , as we want you to enjo y your new Sennheiser product quickly and to the full. 1 Brief description W ith the E M 35 32-U twin receiver , Sennheiser offers the pr of ...

  • Sennheiser EM 3532-U - page 5

    41 2 Connections and operating elements  Headphone socket 1 / 4 ” (6.3 mm) ø  Headphone volume contr ol  Multi-function LC displa y panel  Buttons for selecting and programming the menus  S ET/storage button  ON / O F F switch  Fuse holder and mains v oltage selection  2-pin I EC mains connector  Cable g rip for mains ...

  • Sennheiser EM 3532-U - page 6

    42 3 Noise reduction with HiDyn plus ™ Pr og ress you can hear: This receiv er is equipped with HiDyn plus ™ , the Sennheiser noise r eduction system that reduces RF interference. It incr eases the signal-to-noise ratio in wireless audio transmission to up to 110 dB. The 96 dB dynamic range of a C D is thus considerably surpassed. HiDyn plus ? ...

  • Sennheiser EM 3532-U - page 7

    43 electronic switching from one signal to another receiver 2 receiver 1 AF-signal AF-signal 4 Diversity reception The E M 3 53 2 receiv er operates on the “true diversity” principle: A receiving antenna r eceiv es not only the electr omagnetic wav es which reach it b y a dir ect path, but also the reflections of these wa v es which ar e create ...

  • Sennheiser EM 3532-U - page 8

    44 5 Assembly and mounting Use as a stand-alone receiver When using the E M 35 32 as a stand-alone receiver , it is easiest to use the supplied telescopic antennæ. They can b e mounted quickly and easily to the r ear of the receiver and ar e suitable for all applications where – good r eception conditions provided – a wir eless transmission sy ...

  • Sennheiser EM 3532-U - page 9

    45 Mounting the receiver into a rack W ith the two supplied rack mount “ears” , the r eceiv er can be mounted into a 19” rack (1 U). The rack mount “ ears” a re sc rewe d t o the receiv er on the left and right  . Note If you wish to connect the antennæ to the fr ont side, y ou must pull the cables of the GA 303 0-AM antenna mount th ...

  • Sennheiser EM 3532-U - page 10

    46 6 Connection and mounting of remote antennæ If the receiv er position is not the b est antenna position for optimum reception, you can use r emote antennæ and antenna boosters. These are available as accessories. The best reception quality is obtained with the Sennheiser A12 AD-U H F active antenna. Antenna and receiv er can be connected with ...

  • Sennheiser EM 3532-U - page 11

    47 7 Selecting the mains voltage Before y ou plug the mains connector into the mains, please check first of all that the receiver is set to the correct mains v oltage! Y ou can change the mains voltage b y remo ving the fuse holder  with the inserted fuse  , turning it through 180 °  and inserting it again  . The set voltage can be see ...

  • Sennheiser EM 3532-U - page 12

    48 8 Putting the EM 3532 into operation The receiv ers are switched on separately with the ON / O F F switches  . The respectiv e displa y panel  is now lit up to sho w that the receiver is switched on, and the standar d display is sho wn (see chapter 11). The displa y “ MUTE ”  (see chapter 15) lights up, and the RF field strength is ...

  • Sennheiser EM 3532-U - page 13

    49 9 Basic functions of the Sennheiser operating menu A special feature of the Sennheiser 3000 series is the similar operation of transmitters and r eceivers. In stressfull situations, for example on stage or during a liv e sho w or presentation, it is important that the receiv er is easy to operate and that adjustments to the receiver settings can ...

  • Sennheiser EM 3532-U - page 14

    50 10 Menus / Overview FREQUENCY indicates the current r eceiving frequency . (  chapter 12) CHANNEL indicates the currently assigned channel number . (  chapter 14) SQUELCH indicates the squelch threshold. (  chapter 15) SCAN scans for available RF signals, the receiving fr equency found is shown on the displa y . (  chapter 1 7) BOOST ...

  • Sennheiser EM 3532-U - page 15

    51            11 LC display panel  Displa y for the “ FREQUENCY ” menu. This displa y can b e the receiv er’s standard displa y which alwa ys appears after switch-on.  Displa y for the “ BOOSTER FEED ” menu.  Displa y for the “ CHANNEL ” menu. This displa y can also b e the receiv er’s ...

  • Sennheiser EM 3532-U - page 16

    52 12 Setting a receiving frequency , allocating a frequency memory and assigning a channel number The E M 35 32 receiver has a switchable fr equency memory to store a maximum of 3 2 receiving frequencies with their r espective channel numbers. The storing pr ocedure is similar for each entry or modification: 씰 Pr ess the  /  buttons to sel ...

  • Sennheiser EM 3532-U - page 17

    53 씰 W ith the  /  buttons you can no w select a frequency memory (nos. 1 to 32). If the frequency memory has been assigned a channel number , this is also indicated. I f no channel number has b een assigned, three “h yphens” appear on the display , indicating that the frequency memory is empty (see chapter 13). 씰 Hav e you set the fr ...

  • Sennheiser EM 3532-U - page 18

    54 13 Deleting a receiving frequency , emptying a frequency memory 씰 Y ou can empty a frequency memory if y ou enter thr ee “hyphens” when assigning a channel number . 씰 The last frequency stor ed cannot b e deleted. If you try to delete the last frequency stor ed, the displa y briefly indicates “ LASt ” and then switches back to the st ...

  • Sennheiser EM 3532-U - page 19

    55 14 Setting the receiving frequency via the channel number In the “ CHANNEL ” menu, you can dir ectly change fr om one stor ed receiving fr equency to the next. 씰 Pr ess the  /  buttons to select the “ CHANNEL ” menu. Then press the SET button. The “ CHANNEL ” displa y on the displa y panel  b egins to flash: The displa y i ...

  • Sennheiser EM 3532-U - page 20

    56 15 Squelch (Muting) The E M 3 53 2 receiver is equipped with an adjustable squelch which eliminates anno ying noise when the transmitters are switched on and off. It also suppr esses sudden noise when a transmitter leav es the reception area and ther e is no longer sufficient transmitter po wer r eceived b y the receiv er . The adjustment of the ...

  • Sennheiser EM 3532-U - page 21

    57 16 Advanced muting function This receiv er also features AM F ( A dvanced M uting F unction). This special electronic featur e comes into effect when an RF signal drops b y about 4 0 dB in a short time. The r eception is then muted for at least three seconds. AM F thus suppresses the anno ying switch-off click when a transmitter is switched off. ...

  • Sennheiser EM 3532-U - page 22

    58 17 Automatic transmitter search tuning – Scan function The E M 3 5 32 receiver featur es a scan function to scan the frequency range of the tuner for a transmitter . F or some countries, this menu is locked via a special configuration program, since not all tunable receiving fr equencies ar e appro ved in these countries. If the “ SCAN ” m ...

  • Sennheiser EM 3532-U - page 23

    59 씰 If no transmitter is found, the search tuning stops at the upper or lo w er limit of the 24 M Hz frequency windo w . The display then indicates: 씰 If a transmitter with a strong enough RF signal (higher than the squelch level, but at least 5 μ V) is found, this frequency is indicated on the displa y . In addition, the deviation and the RF ...

  • Sennheiser EM 3532-U - page 24

    60 18 Adding a supply voltage for antenna boosters Antenna boosters can b e connected to the antenna inputs of the E M 3 5 32 receiver and can be supplied b y the r eceiver via the antenna cables. The supply v oltage can b e switched on or off. Both receiv ers in the E M 35 32 should b e set to the same setting, i.e. both receiver should be set to ...

  • Sennheiser EM 3532-U - page 25

    61 19 Stand-by operation The E M 35 32 receiver can be set to stand-b y operation. During stand-b y operation, information from the RF section is no longer processed and the AF section is muted (M UTE). All other menus – except for “ REMOTE ” and “ ST ANDBY ” – are locked. If you try to select an y other menu, “ Loc ” appears on the ...

  • Sennheiser EM 3532-U - page 26

    62 20 Remote control The E M 35 32 receiver can be set for “computer remote contr ol only” . When set for remote control, all other menus – except for “ REMOTE ” – are locked. If y ou try to select an y other menu, “ Loc ” appears on the displa y . 씰 Pr ess the  /  buttons to select the “ REMOTE ” menu. The current setti ...

  • Sennheiser EM 3532-U - page 27

    63   21 Power of the received RF signal In displa y panel  , the po w er of the receiv ed R F signal  (in μ V) and the lev el contr ol of the AF signal (in %)  – i.e. the modulation of the RF signal – are shown. Both displa ys hav e an o v ermodulation displa y . If the signal is too high, “ PEAK ” lights up briefly . Short ...

  • Sennheiser EM 3532-U - page 28

    64 22 Monitoring the sound signal, headphone connection Sockets  on the E M 3 53 2 receiv er can be used to monitor the sound signal receiv ed with headphones. The headphone volume is adjusted with contr ols  . Please use headphones with a 1 / 4 ” (6.3 mm) ø stereo jack plug. The sound signal itself is mono. The Sennheiser H D 25 headphone ...

  • Sennheiser EM 3532-U - page 29

    65 23 Replacing a fuse Disconnect the receiv er completely from the mains! T o do so, pull out the mains connector  on the receiv er . Y ou can then remo ve the fuse holder  with the inserted fuse. Replace the fuse b y a new fuse with the same rating and switch on the receiv er again. Make sure that y ou hav e inserted the fuse holder the cor ...

  • Sennheiser EM 3532-U - page 30

    66  24 Sennheiser transmitters report their battery status Sennheiser supplies hand-held and pocket transmitters which pro vide information on the available transmitter battery status to the receiv er . This information can b e evaluated with the E M 3 5 32 receiv er .  The remaining battery capacity is first indicated via the six-step bar ...

  • Sennheiser EM 3532-U - page 31

    67 25 Suitable Sennheiser transmitters F or the optimum use of the excellent reception qualities of the E M 35 3 2 receiv ers, Sennheiser offers hand-held and pocket transmitters in a variety of configurations: P ocket transmitters: S K 1063-U (without display of battery status) B F 10 83-U (without display of battery status) S K 50-U (with displa ...

  • Sennheiser EM 3532-U - page 32

    68 26 Error checklist Error Possible cause Receiv er does not work; displa y panel dark  F use defective Receiv er does not work; displa y panel lit up  T ransmission frequency does not ag r ee with receiving fr equency  Squelch thr eshold adjusted too high Sound distorted  AF output signal adjusted too high. Input of the connected mixi ...

  • Sennheiser EM 3532-U - page 33

    69 28 Recommended accessories  Antenna mount GA 303 0-AM Cat. no. 04 36 8  Activ e antenna A 12 AD-U H F Cat. no. 04 156  Ground plane antenna GZA 1036-9 Cat. no. 02 33 2  Antenna booster AB 1036- TV Cat. no. 03 59 8  Co-axial cable, 1 m GZ L 1019 A1 Cat. no. 02 32 4  Co-axial cable, 5 m GZ L 1019 A5 Cat. no. 02 32 5  Co-axial ...

  • Sennheiser EM 3532-U - page 34

    70 29 T echnical data RF characteristics Fr equency range 43 0–9 60 M Hz Receiving fr equencies max. 3 2 (32 frequency memories) S witching bandwidth 24 M Hz Fr equency stability ± 10 ppm (– 1 0 ° C to + 5 5 ° C) Sensitivity (with HiDyn plus ™ )< 5 μ V for 90 dBA rms S N R Squelch treshold 0 to 1 00 μ V , adjustable Image rejection ? ...

  • Sennheiser EM 3532-U - page 35

    Sennheiser electronic GmbH & Co. KG 30900 Wedemark, Germany Phone +49 (5130) 600 0 Fax +49 (5130) 600 300 www.sennheiser.com Printed in Germany Publ. 08/02 68746/A 03 ...

Fabricant Sennheiser Catégorie Stereo Receiver

Les documents que nous recevons du fabricant de l'appareilSennheiser EM 3532-U peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Sennheiser
- manuels d’utilisations EM 3532-U
- fiches produit Sennheiser
- dépliants
- ou étiquettes-énergie Sennheiser EM 3532-U
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Sennheiser EM 3532-U.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Sennheiser EM 3532-U, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Sennheiser EM 3532-U. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Sennheiser EM 3532-U.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Sennheiser EM 3532-U, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Sennheiser EM 3532-U par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Sennheiser EM 3532-U.

Le manuel d’utilisation complet Sennheiser, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Sennheiser EM 3532-U - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Sennheiser EM 3532-U, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lSennheiser EM 3532-U qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Sennheiser EM 3532-U - qui devraient nous aider dans les premières étapes lors de l'utilisation Sennheiser EM 3532-U
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Sennheiser EM 3532-U
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Sennheiser EM 3532-U dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Sennheiser EM 3532-U?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Sennheiser EM 3532-U, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Sennheiser EM 3532-U il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)