Français dropdown-ico

Manuel d’utilisation Aleratec 330107

45 pages 1.18 mb
Télécharger

Aller à la page of 45

Summary
  • Aleratec 330107 - page 1

    USER GUIDE Aleratec 1:1 1 USB Copy Cruiser SA™ Part No. 330107 ...

  • Aleratec 330107 - page 2

    www .aleratec.com Copyright/Model Identification The content of this manual is for informational purposes only and is subject to change without notice. This manual is copyright with all rights reserved. Under copyright laws, this manual and the software described within may not be copied, except in the normal use of the product(s) described within ...

  • Aleratec 330107 - page 3

    www .aleratec.com Radio/TV Interference Statement The equipment described in this guide emits radio frequency energy . If it is not installed in accordance with the manufacturer ’ s instructions, it may cause interference with radio or television reception. This equipment has been tested and found to comply with the limits for a Class B digital d ...

  • Aleratec 330107 - page 4

    www .aleratec.com Safety Regulations W ARNING T o prevent re or shock hazard, do not expose the unit to rain or moisture. T o avoid electrical shock, do not open the cabinet. Refer servicing to authorized personnel only . ...

  • Aleratec 330107 - page 5

    www .aleratec.com T able of Contents Introduction .......................................................................................1 Product Features ..................................................................................... 1 Key Items – 1:1 1 USB Copy Cruiser SA ................................................ 1 1:1 1 USB Copy ...

  • Aleratec 330107 - page 6

    www .aleratec.com ...

  • Aleratec 330107 - page 7

    www .aleratec.com 1 Introduction Thank you for purchasing this 1:1 1 USB Copy Cruiser SA. Please read this User Guide thoroughly before using this product. • Page 2 shows the 1:1 1 USB Copy Cruiser SA Display Panel. Product Features • Stand Alone, no computer required. • Copy to, Compare, or Erase up to 1 1 drives simultaneously . • Backlig ...

  • Aleratec 330107 - page 8

    www .aleratec.com 2 Introduction 1:1 1 USB Copy Cruiser SA Display Panel 1 Display shows all functions and messages 2 ENT button is used to execute a selected function 3 ESC button is used to cancel a selected function 4 UP arrow is used to scroll up through functions or menus 5 DOWN arrow is used to scroll down through functions or menus 1 3 5 2 4 ...

  • Aleratec 330107 - page 9

    www .aleratec.com 3 Precautions Bef ore in stall ing your 1: 1 1 US B Cop y C rui ser S A, ple ase r ead th e f ollow ing . Installation A void placing the 1:11 USB Copy Cruiser SA in a location subject to: • High humidity • High temperature • Excessive dust • Mechanical vibration • Direct sunlight • Electromagnetic radiation Operation ...

  • Aleratec 330107 - page 10

    www .aleratec.com 4 Overview Main Menu This section provides a listing of the functions of the 1:1 1 USB Copy Cruiser SA. Detailed descriptions of each function are given in the next section. The functions are numbered for easy reference; these numbers are also used in the next section. OK ESC   USB Duplicator 1. Copy USB Duplicator 2. Compar ...

  • Aleratec 330107 - page 11

    www .aleratec.com 5 Overview Subfunctions of Main Menu Items 5, 6, and 7 The main menu “Information” function has 2 subfunctions. These are: The main menu “Utility” function has 6 subfunctions. These are: 5.1 USB Info 5.2 System Info USB Duplicator 5. Information OK ESC   6.1 Format F A T 6.2 Measure Speed USB Duplicator 6. Utility OK ...

  • Aleratec 330107 - page 12

    www .aleratec.com 6 Overview Subfunctions of Main Menu Items 5, 6, and 7 - continued The main menu “Setup” function has 8 subfunctions. These are: 7.1 Start-up Menu 7.2 Copy Area USB Duplicator 7. Setup OK ESC   7.3 Button Beep 7.4 Asyn Hold Time 7.5 Ignore Size 7.6 Asynchronous Enable/Disable 7.7 Language 7.8 Working Mode Normal/T urbo E ...

  • Aleratec 330107 - page 13

    www .aleratec.com 7 Using the USB Duplicator Synchronous and Asynchronous The 1:1 1 USB Copy Cruiser SA supports two copying methods: • Synchronous • Asynchronous Synchronous Copying Synchronous Copying means that all ash drives begin copying together . Synchronous Copying is used when the source data is larger than the system buffer (256MB) ...

  • Aleratec 330107 - page 14

    www .aleratec.com 8 Using the USB Duplicator Main Menu Functions are selected with the arrow keys. The numbers correspond to the Function listing in the previous section. Copy This function makes USB ash copies. The duplicator auto detects and supports Synchronous, and Asynchronous methods of Copy . Synchronous Copying In Synchronous Copying all ...

  • Aleratec 330107 - page 15

    www .aleratec.com 9 Using the USB Duplicator Synchronous Copying - continued 4. Finish loading the blank target ash drives, then press the OK button on the display panel. 5. The LCD will display the status of the copying process. 6. When Copy is complete LCD will display the following status: If the Copy fails, the LCD will display the number of ...

  • Aleratec 330107 - page 16

    www .aleratec.com 10 Using the USB Duplicator 2. Press the OK button on the display panel. The USB Duplicator will start to read the source content into the system’ s buffer and immediately start copying any loaded target USB ash drives. 3. Load the blank tar get ash drives into the USB Duplicator . The LCD will display the number of blank ...

  • Aleratec 330107 - page 17

    www .aleratec.com 1 1 Using the USB Duplicator Main Menu Compare This function will compare the nished target USB ash drives to the source USB ash drive after copying is complete. The USB Duplicator supports Compare in both Synchronous, and Asynchronous modes. Synchronous Compar e In Synchronous Compare all USB ash drives are compared s ...

  • Aleratec 330107 - page 18

    www .aleratec.com 12 Using the USB Duplicator 4. When Compare is complete the display will show the total, and the number that pass and fail. Asynchronous Compar e Asynchronous Compare is used only when the source content is the same as or less than the system buffer (256MB). With the source content read into the systems buffer you can compare a ...

  • Aleratec 330107 - page 19

    www .aleratec.com 13 Using the USB Duplicator Asynchronous Compar e - continued 4. As nished drives are removed, and new ash drives inserted, the display will show the number of comparisons completed and the number of USB ash drives still in the comparison process. If the Compare fails, the LCD will display the number of ash drives that ...

  • Aleratec 330107 - page 20

    www .aleratec.com 14 Using the USB Duplicator Main Menu Copy+Compare This function will Copy and Compare USB ash drives. The duplicator auto detects and supports Synchronous, and Asynchronous methods of Copy+Compare. Synchronous Copy+Compar e In Synchronous Copy+Compare all USB ash drives are copied and compared simultaneously . Synchronous C ...

  • Aleratec 330107 - page 21

    www .aleratec.com 15 Using the USB Duplicator Synchronous Copy+Compar e - continued 4. Finish loading the blank tar get ash drives, then press the OK button on the display panel. 5. The LCD will display the status of the copying process. 6. When Copy is complete LCD will display the following status: If the Copy fails, the LCD will display the n ...

  • Aleratec 330107 - page 22

    www .aleratec.com 16 Main Menu Asynchronous Copy+Compar e Asynchronous Copy+Compare is used only when the source content is the same as or less than the system buffer (256MB). With the source content read into the systems buffer you can copy and compare ash drives continuously by taking out the drive which has nished its Copy+Repair cycle, an ...

  • Aleratec 330107 - page 23

    www .aleratec.com 17 Using the USB Duplicator Asynchronous Copy+Compar e - continued 4. If the Copy fails, the LCD will display the number of ash drives that failed and passed. Note: During Asynchronous Copying you can use the UP and DOWN arrow keys to check each flash drives copying status. 5. When Copy is complete the Compare portion will aut ...

  • Aleratec 330107 - page 24

    www .aleratec.com 18 Using the USB Duplicator Main Menu Capacity Check This function will check the capacity of each ash drive inserted. When nished the following screen will appear . Using the UP and DOWN arrows, you can scroll thru each drive loaded to display capacity . Information This function includes 2 subfunctions. These are: 5.1 USB ...

  • Aleratec 330107 - page 25

    www .aleratec.com 19 Using the USB Duplicator 5.1 USB Info. USB Info is a function that displays the USB ash drives basic information such as ash type, content size, and available space. 1. Use UP or DOWN arrow to scroll through the menu until Information is displayed on the LCD screen. Press the OK button to select or press ESC to go to the ...

  • Aleratec 330107 - page 26

    www .aleratec.com 20 Using the USB Duplicator Main Menu Utility The main menu Utility function has 6 subfunctions. These are: 6.1 Format F A T 6.2 Measure Speed USB Duplicator 6. Utility OK ESC   6.3 Media Check 6.4 Quick Erase USB 6.5 Full Erase USB 6.6 System Update 6.7 Calc. Checksum ...

  • Aleratec 330107 - page 27

    www .aleratec.com 21 Using the USB Duplicator Main Menu 6.1 Format F A T This function is used to format ash drives with the duplicator . If the original format is F A T , then the format operation will not change the format, but will write over any data on the ash drive. If the format is not F A T (e.g. NTFS, Linux, or F A T multi-partition) ...

  • Aleratec 330107 - page 28

    www .aleratec.com 22 Using the USB Duplicator 6.2 Measure Speed This function will measure the read and write speeds of drives loaded in the ports. 1. Load drives. Use UP or DOWN arrow to scroll through the menu until Utility is displayed on the LCD screen. Press the OK button to select or press ESC to go to the next setting. 2. Press OK and scroll ...

  • Aleratec 330107 - page 29

    www .aleratec.com 23 Using the USB Duplicator 2. Press OK and scroll to Media Check. The LCD will display the following status: 3. Use UP or DOWN arrow to scroll through the available options: 6.3.1 Safe Check This function will read all the data on the ash drive with no writing so as to preserve all of the data and format on the drive. Use the ...

  • Aleratec 330107 - page 30

    www .aleratec.com 24 Using the USB Duplicator 6.4 Quick Erase USB Quick Erase USB is a function that can quickly erase the target USB ash drive. Note: The Quick Erase USB function will only erase the F A T table index of each target flash drives. 1. Use UP or DOWN arrow to scroll through the menu until Utility is displayed on the LCD screen. Pr ...

  • Aleratec 330107 - page 31

    www .aleratec.com 25 Using the USB Duplicator 6.5 Full Erase USB Full Erase USB is a function what will erase all data on the target USB ash drive. Note: The Full Erase USB will completely erase data of each of the target flash drives This function will also clear the F A T table in the flash drive. Y ou will not be able to read the flash dri ...

  • Aleratec 330107 - page 32

    www .aleratec.com 26 Using the USB Duplicator 6.7 Calc. Checksum The Calculate Checksum function computes a checksum for the contents of the source drive. This alphanumeric can be used to ensure that no minor changes due to alteration or virus have occurred on the source drive since its last use. 1. Use UP or DOWN arrow to scroll through the menu u ...

  • Aleratec 330107 - page 33

    www .aleratec.com 27 Using the USB Duplicator Main Menu Setup This function includes 8 subfunctions. These are: 7.1 Start-up Menu 7.2 Copy Area USB Duplicator 7. Setup OK ESC   7.3 Button Beep 7.4 Asyn Hold Time 7.5 Ignore Size 7.6 Asynchronous Enable/Disable 7.7 Language 7.8 Working Mode Normal/T urbo ...

  • Aleratec 330107 - page 34

    www .aleratec.com 28 Using the USB Duplicator 7.1 Startup Menu Startup Menu allows you to select which function displays rst when the USB Duplicator is turned on. This function selects the menu item that will be the rst item shown on the display when you turn on the duplicator . The default setting is Copy . 1. Use the UP or DOWN arrow to scr ...

  • Aleratec 330107 - page 35

    www .aleratec.com 29 Using the USB Duplicator 7.3 Button Beep This setting controls the button sound. 1. Use the UP or DOWN arrow to scroll through the menu until Setup is displayed on the LCD screen. Press the OK . 2. Use the UP or Down arrow to scroll through the Setup options until Button Beep is displayed on the LCD screen. 3. Default setting i ...

  • Aleratec 330107 - page 36

    www .aleratec.com 30 Using the USB Duplicator 7.4 Asyn Hold T ime This function allows you to set the time to exit Asynchronous Copying when you pull all the USB ash drives out of the duplicator . The default setting is 30 seconds. If after 30 seconds no new drives are plugged into the USB Duplicator the LCD will ask to exit Asynchronous or to s ...

  • Aleratec 330107 - page 37

    www .aleratec.com 31 Using the USB Duplicator 7.5 Ignore Size - continued 1. Use the UP or DOWN arrow to scroll through the menu until Setup is displayed on the LCD screen. Press the OK button to select or press ESC to go to the next setting. 2. Use the UP or Down arrow to scroll through the options until Ignore Size is displayed on the LCD screen. ...

  • Aleratec 330107 - page 38

    www .aleratec.com 32 Using the USB Duplicator 7.6 Asynchronous (Enable/Disable) This function allows the user to enable/disable asynchronous copying. Use Up and Down arrow keys to toggle between and push OK to select, or ESC to exit. 7.7 Language This function selects the language shown on the display (English, T raditional Chinese, Simplied Chi ...

  • Aleratec 330107 - page 39

    www .aleratec.com 33 Specifications Operating T ype • Stand-alone (No PC Required) Number of T argets • 11 Supported Media • USB Flash/Pen Drive requiring less than 500mA from USB Port T ransfer Speed • 128MB/min T ypical Copy Mode • Synchronous or Asynchronous LCD Display • 2 x 16 Backlit Power Requirements • 115V or 230V Operating ...

  • Aleratec 330107 - page 40

    www .aleratec.com 34 T echnical Support After reading this User Guide, if you need additional assistance with this product, please contact Aleratec T echnical Support. Our technical staff will be happy to assist you, but they may need your help to better assist you. Calling Aleratec T echnical Support without all the necessary information can be bo ...

  • Aleratec 330107 - page 41

    www .aleratec.com 35 Service and Support Aleratec, Inc., Limited W arranty This Limited W arranty covers defects encountered in the course of normal use of this product and does not apply to damage from improper use, abuse, accidents, unauthorized service, or inadequate packaging when shipping the product to Aleratec, Inc. Aleratec, Inc. provides t ...

  • Aleratec 330107 - page 42

    www .aleratec.com 36 Service and Support Please Note: This W arranty is valid only within the United States and Puerto Rico, and applies only to products that are new and unopened on the date of purchase. For areas outside the United States and Puerto Rico, contact the authorized dealer from whom you purchased this product to determine which warran ...

  • Aleratec 330107 - page 43

    www .aleratec.com 37 Service and Support T o Obtain W arranty Service: Y ou must ship your subsystem to the authorized dealer where your subsystem was purchased within the one year warranty period and no later than thirty days after discovery of claimed defect, whichever occurs rst. In either case, you must provide proof of original purchase bef ...

  • Aleratec 330107 - page 44

    www .aleratec.com 38 T echnical Support F AX Back Form Aleratec, Inc. T echnical Support Fax Back Form Please record the following information to help expedite any warranty claim: Model No.: _____________ Serial No.: ____________________________ Date Purchased ________________________________________________ Place of Purchase: _____________________ ...

  • Aleratec 330107 - page 45

    Document Number: 330107_ENG_Rev . A Copyright © 2010 Specifications subject to change without notice. Aleratec, Inc. 9851 Owensmouth Avenue Chatsworth, CA 91311 U.S.A. www .aleratec.com ...

Fabricant Aleratec Catégorie Computer Accessories

Les documents que nous recevons du fabricant de l'appareilAleratec 330107 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Aleratec
- manuels d’utilisations 330107
- fiches produit Aleratec
- dépliants
- ou étiquettes-énergie Aleratec 330107
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Aleratec 330107.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Aleratec 330107, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Aleratec 330107. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Aleratec 330107.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Aleratec 330107, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Aleratec 330107 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Aleratec 330107.

Le manuel d’utilisation complet Aleratec, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Aleratec 330107 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Aleratec 330107, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lAleratec 330107 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Aleratec 330107 - qui devraient nous aider dans les premières étapes lors de l'utilisation Aleratec 330107
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Aleratec 330107
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Aleratec 330107 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Aleratec 330107?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Aleratec 330107, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Aleratec 330107 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)