-
Panasonic EB-GD30 - page 1
Operating Instructions EB-GD30 Digital Cellular Telephone Main Kit Before operating this equipment please read these instructions completely. ...
-
Panasonic EB-GD30 - page 2
...
-
Panasonic EB-GD30 - page 3
Contents Introduction ........................1 Symbols Used ......................1 Using This Manual ....................1 Safety ...........................3 Getting Started ......................4 Fitting/Removing the SIM ................4 Fitting/Removing the Battery ..............5 Charging the Battery ..................6 Low Battery Warning ...
-
Panasonic EB-GD30 - page 4
Retrieving a Number ..................2 3 Editing Phonebook Entries ...............2 4 Hot Key Phone Numbers ................2 4 Advanced Phonebook .................2 5 Note Pad ........................2 5 Recent Numbers ....................2 5 Fixed Dial .......................2 6 Service Dial ......................2 7 Short Text Messages ........ ...
-
Panasonic EB-GD30 - page 5
Introduction Thank you for purchasing this Panasonic GD30 digital cellular phone. This phone is designed to operate on the Global System for Mobile Communications (GSM), GSM900 or GSM1800. These operating instructions detail use of the equipment contained in the Main Kit. Some services are network dependent or may only be available on a subscriptio ...
-
Panasonic EB-GD30 - page 6
Short Text Messages: Details how to set up your phone to receive and send Short Text Messages and to receive Cell Broadcasts. Alpha Entry: Details how to access alternative characters with the keypad. Menu Structures: Details the features that can be accessed from the phone menu. The remaining sections details how to take care of your phone, lists ...
-
Panasonic EB-GD30 - page 7
Safety This equipment is intended for use when supplied with power from the built-in charger or Dual Charger (EB-CRD30) through the AC Adaptor (EB-CAD70Vxx)*. Other usage will invalidate any approval given to this apparatus and may be dangerous. The use of approved accessories is recommended to ensure optimum performance and avoid damage to your ph ...
-
Panasonic EB-GD30 - page 8
Getting Started Fitting/Removing the SIM The SIM is fitted into a holder at the back of the phone underneath the battery. Fitting the SIM Removing the SIM To remove the SIM follow the above steps in reverse. 4 Getting Started 3 1 ...
-
Panasonic EB-GD30 - page 9
Fitting/Removing the Battery Fit a fully charged battery pack. If the battery pack is not fully charged then it must be charged as shown in “Charging the Battery”. Fitting the Battery Removing the Battery 5 Getting Started ...
-
Panasonic EB-GD30 - page 10
Charging the Battery The battery pack must be attached to the phone before the AC Adaptor. NOTE: DO NOT force the connector as this may damage the phone and/or the AC Adaptor. When charging is complete remove the AC Adaptor. To maintain maximum performance of Ni-MH Battery Packs always use until the Low Battery Warning and then fully recharge. Oper ...
-
Panasonic EB-GD30 - page 11
Location of Controls g Navigation key – pressing up/down scrolls through options in the main area of the display or adjusts the volume. Pressing left/right scrolls through options in the option area of the display B Select key – selects an option in the option area of the display A accesses Phonebook or switches character types D makes a call o ...
-
Panasonic EB-GD30 - page 12
Display Following some operations the display will automatically clear after three seconds or after pressing any key. Y lights when you are registered to a non-home network - roaming t lights when call divert is enabled ] lights when vibration alert is enabled [ lights when all tones or ring volume is off N flashes when an unread message is stored ...
-
Panasonic EB-GD30 - page 13
Basic Operation Power On/Off To turn the phone on or off. FE and hold to switch power on A greeting will be displayed. FE and hold to switch power off Making a Call Make sure that the phone is switched on and the signal strength meter is displayed. 1 F area code and phone number 2 FD International Dialling Using the Automatic International Access C ...
-
Panasonic EB-GD30 - page 14
Emergency Calls To make an emergency call the antenna symbol ( S ) must be present. F 112 D or press B when “SOS” is displayed in the option area of the display Automatic Redial When a call is unsuccessful the phone will ask if you want to redial the phone number again automatically. FB when “OK” is displayed in the option area Auto Redial ...
-
Panasonic EB-GD30 - page 15
Caller Identification This feature allows you to identify incoming calls and accept or reject them. The caller’s phone number, and name if stored in Phonebook, will be displayed. NOTE: Caller Identification may not always be available. Volume Control Earpiece Volume Four levels of volume adjustment are available. During a call: Fa to decrease the ...
-
Panasonic EB-GD30 - page 16
Vibration Alert When vibration alert is switched on the phone will vibrate when a call is received. Switching on vibration alert will silence the ring volume. However, when the ring volume is adjusted after the vibration alert is switched on, the phone will ring and vibrate when a call is received. During standby: F# and hold to switch on or off. W ...
-
Panasonic EB-GD30 - page 17
Phone Clock This phone incorporates a clock with date/time, an alarm and a power on/off feature. Initially Setting the Clock When “Menu” is displayed in the option area of the display: 1 FB and e to point to “Applications” 2 FB and e to point to “Clock Function” 3 FB and e to point to “Clock Set” 4 FB 5 F enter the digits for the da ...
-
Panasonic EB-GD30 - page 18
7 Fe to select the frequency of the alarm 8 FB Once the alarm has been set, ? will be displayed when the phone is in standby mode. Muting the Alarm When the set time is reached the alarm will sound and the display will flash with an alarm message. The alarm will sound for 30 seconds. If the alarm goes off during a call, it will activate vibration a ...
-
Panasonic EB-GD30 - page 19
Setting a Power On/Off Time You can set your phone to turn itself on or off automatically at a specified time using the Power On/Off feature. The procedure for setting the Power On/Off automatically is similar to that for setting the Alarm. Adjustment of the Power On/Off Time is also similar to that for the alarm. For either setting or adjusting th ...
-
Panasonic EB-GD30 - page 20
Phone Security There are a number of security features for this phone that will protect against unauthorized use, and enable you to restrict access to certain features. It is recommended that you memorize your security codes. If you need to make a note of your security codes, never write them in a way that they can be recognized by another person. ...
-
Panasonic EB-GD30 - page 21
PIN The PIN (Personal Identification Number) protects your SIM card against unauthorized use. If you enable the PIN, every time the phone is turned on you will be asked to enter the PIN. Once this has been correctly entered you will be able to use the phone. As with the Phone Lock you can change the PIN at any time. PIN2 controls security for the F ...
-
Panasonic EB-GD30 - page 22
Advanced Operation DTMF Tones DTMF tones can be sent during conversation. These are often used to access voice mail, paging and computerized home banking. For example, you may need to input a number to remotely access voice mail messages. Send DTMF Tones During a Call F digits (0 to 9, # and *) Pause Dial Using pauses allows you to send DTMF tones ...
-
Panasonic EB-GD30 - page 23
5 F enter the phone number or recall from the Phonebook – see “Retrieving a Number” page 23 6 FB 7 F and use e to select the ring tone that you wish to use for incoming calls from this phone number 8 FB Call Hold and Call Waiting Holding/Resuming a Call 1 FB when “Hold” is displayed in the option area 2 FB when “Resume” is displayed i ...
-
Panasonic EB-GD30 - page 24
Operation During Two Calls Swapping Between Calls FB when “Swap” is displayed in the option area End Current Call 1 Ff to display “End” in the option area 2 FB The held call will remain held. End Both Calls FE Call Transfer With two calls connected, Call Transfer enables you to connect them together ending your connection, leaving them to t ...
-
Panasonic EB-GD30 - page 25
Adding to Multi-party You can add to the Multi-party call (up to a maximum of five). Either by making a call or accepting an incoming call. The call can then be merged into the Multi-party. NOTE: When making a call or accepting an incoming call the Multi-party call will be placed on hold. The callers in the Multi-party call can continue to communic ...
-
Panasonic EB-GD30 - page 26
Phonebook Basics Phone numbers can be stored in two locations. You can store numbers in the SIM Phonebook (therefore the number of locations, length of name and number of phone numbers are SIM dependant). Alternatively you can store phone numbers in the Mobile Phonebook, this means that if you change the SIM the numbers in the phone are not lost. S ...
-
Panasonic EB-GD30 - page 27
Browsing Phonebooks by Name or Location You can search the phonebook by either Name or Location. The default setting for browsing is “Names”. All Phonebook entries will be listed in alphabetical order of both SIM and Mobile Phonebook merged. When browsing by name pressing a lettered key will take you to the first entry starting with that letter ...
-
Panasonic EB-GD30 - page 28
Editing Phonebook Entries You can View, Recall, Edit, Delete or Create in the Phonebook. To access these features you follow the same procedure. With a phone number or name displayed: 1 Ff and scroll between “View”, “Recall”, “Edit”, “Delete” or “Create” 2 FB to select an option View Displays an individual phone number and name ...
-
Panasonic EB-GD30 - page 29
Advanced Phonebook Note Pad During a call you can enter numbers which you may wish to dial when the call has ended. During a call: 1 F phone number 2 When the call has ended press D to call that number To store in Phonebook, press A while the number is displayed – see “Storing a Number” page 22. Recent Numbers Recently dialled phone numbers w ...
-
Panasonic EB-GD30 - page 30
Returning an Unanswered Call When the display shows that you have received calls but not answered them. 1 FB 2 The last caller’s phone number will be displayed if it is available 3 Fe to point at the phone number you wish to dial 4 FD Fixed Dial The Fixed Dial Store is part of Phonebook, but with additional security. When the security feature Fix ...
-
Panasonic EB-GD30 - page 31
Service Dial Your Service Provider may program some special phone numbers into your SIM. It is not possible to modify the Service Dial numbers. 1 FA and hold 2 Fg to browse through the Service Dial list of phone numbers The phone number pointed to can only be recalled or dialled. 27 Advanced Phonebook ...
-
Panasonic EB-GD30 - page 32
Short Text Messages You can receive, display, edit and/or send short text messages, of up to 160 characters to mobile phones on the same network or any network that has a roaming agreement. Setting your Phone for Short Text Messages Before you can send a message you must enter the Message Centre number into Parameters (your Service Provider will su ...
-
Panasonic EB-GD30 - page 33
Sending a Short Text Message You have the option to either create your own message or use a pre-defined message. When “Menu” is displayed in the option area of the display: 1 FB and e to point to “Messages” 2 FB and e to point to “Create” 3 FB and e to select “<Create>” or a pre-defined message 4 FB enter the message (up to 16 ...
-
Panasonic EB-GD30 - page 34
Changing the Pre-Defined Message Language With the pre-defined message highlighted: 1 Use f to select “Lang” 2 FB and e to select a language 3 FB and f to point to “Select” 4 FB twice to send the message Receiving Short Text Messages When a Short Text Message is sent to your phone the message indicator ( N ) will flash in the display, with ...
-
Panasonic EB-GD30 - page 35
Cell Broadcasts Cell broadcasts are general information that is sent to your phone by a network operator. The information can be district traffic or weather. Selecting Broadcast Topics You need to specify the topic(s) of information that you wish to receive as broadcasts before you can receive them. When “Menu” is displayed in the option area o ...
-
Panasonic EB-GD30 - page 36
Alpha Entry Alpha Entry is used to enter alphanumeric characters into Phonebook, Short Text Messages, Price Per Unit and the Greeting Message. Each time a key is pressed in quick succession it will display the next character available on that key (or if the key is pressed and held down it will cycle through the available characters). Releasing the ...
-
Panasonic EB-GD30 - page 37
Menu Structures When the word “Menu” is in the option area of the display pressing the B will display a menu of phone features. To select a feature press e so that the pointer is showing next to the feature that you require then press B . A quick way of selecting a feature is to press the menu number shown in the bottom left of the display. To ...
-
Panasonic EB-GD30 - page 38
Messages Most common use of the Messages is covered in “Short Text Messages” – see page 28 Received messages will be stored in the Receive List . Flashing “•” will indicate unread messages. Once the message is selected, you can read, delete, edit and reply. With the word “Sender:” displayed or a phone number in quotation marks (“ ...
-
Panasonic EB-GD30 - page 39
Broadcasts The Message List will display the last received broadcast messages. The Language in which broadcast messages are displayed can be changed. Applications For instructions on “Phone Clock” - see page 13. Personalise The Language that the phone will use for display messages can be changed. In Tones , the phone key, ring and warning tones ...
-
Panasonic EB-GD30 - page 40
Animation allows the animated themes to be changed or disabled. When the phone is mounted in the optional Car Mount Kit and the vehicle ignition is turned off the In Vehicle - Keep Alive timer will start, delaying the switching off of the phone. If the ignition is turned off during a call, the call will be maintained; when the call ends the timer w ...
-
Panasonic EB-GD30 - page 41
Caller’s ID allows you to check the status of Caller’s Identification. The phone must be registered with a network. Using Withhold ID it is possible to check if you send Caller’s Identification information when you make a call. When checking the Status of Withhold ID the phone must be registered with a network. Call Charge will set the cost o ...
-
Panasonic EB-GD30 - page 42
Security Most common uses of Security are detailed in “Phone Security” - see page 16 Call Bar is used to restrict certain outgoing and/or incoming calls. Call Bar is controlled by a security Password that is supplied by your Service Provider . When updating or checking the Status of Call Bar the phone must be registered with a network. Differen ...
-
Panasonic EB-GD30 - page 43
When the Search Mode is set to “Automatic” the phone will automatically reselect a new network in order to maintain optimum network availability. While the Search Mode is set to “Manual” the phone will only use a selected network. If coverage is lost another network should be selected. The Network List is used when the Search Mode has been ...
-
Panasonic EB-GD30 - page 44
Care and Maintenance Pressing any of the keys may produce a loud tone. Avoid holding the phone close to the ear while pressing the keys. Extreme temperatures may have a temporary effect on the operation of your phone. This is normal and does not indicate a fault. Do not disassemble the equipment. There are no user-serviceable parts. Do not subject ...
-
Panasonic EB-GD30 - page 45
Glossary of Terms DTMF Tones Dual Tone Multi-Frequency tones allow you to communicate with computerized phone systems, voice mailboxes etc. GSM Global System for Mobile Communications. The name given to the advanced digital technology that your phone uses. Home country The country where your home network operates. Home network The GSM network on wh ...
-
Panasonic EB-GD30 - page 46
Registration The act of locking on to a GSM network. This is usually performed automatically by your phone. Roaming The ability to use your phone on networks other than your Home network. Service Provider The organization responsible for providing access to the GSM network. SIM Subscriber Identity Module. A small smart-card which stores unique subs ...
-
Panasonic EB-GD30 - page 47
Trouble Shooting Should any problem persist contact your dealer. Problem Cause Remedy Telephone will not switch on. Check that the Battery Pack is fully charged and correctly connected to the phone. Extremely short battery life for a new battery pack. The network you are using and the condition of the battery pack can affect battery life. Short bat ...
-
Panasonic EB-GD30 - page 48
The phone cannot be switched on when charging When the Battery Pack has been deeply discharged the phone will take a short time to detect which type of Battery Pack it is charging Leave the phone charging the Battery Pack for a few minutes before attempting to switch it on. Calls cannot be made. The phone is locked. Unlock the phone (Menu: Security ...
-
Panasonic EB-GD30 - page 49
Emergency calls cannot be made. You are not in a GSM coverage area. Check that the antenna symbol S is displayed. Move to a coverage area and operate your phone when the antenna symbol is displayed. Telephone numbers cannot be recalled. The phone is locked. Unlock the phone (Menu: Security: Phone Lock) Fixed Dial is switched on. Switch off Fixed Di ...
-
Panasonic EB-GD30 - page 50
Important Error Messages Area not Allowed Roaming in the selected area is not allowed. Network not Allowed Roaming with the selected network is not allowed. Security Failure The network has detected authentication failure because your SIM is not registered with that network. Contact your Service Provider. SIM Blocked The SIM is blocked because the ...
-
Panasonic EB-GD30 - page 51
Specifications Telephone Type GSM900 Class 4 GSM1800 Class 1 Temperature range Charging Storage +5°C to +35°C -20°C to +60°C Battery – Attached to phone Battery Pack (S) Battery Pack (L) Weight 130g 170g Dimensions Height x Width x Depth 135 x 45 x 20.5mm 135 x 45 x 30mm Supply Voltage 3.6V DC, 670mAh Ni-MH 3.6V DC, 1340mAh Ni-MH Standby time ...
-
Panasonic EB-GD30 - page 52
Notes 48 Notes ...
-
Panasonic EB-GD30 - page 53
49 Notes ...
-
Panasonic EB-GD30 - page 54
50 Notes ...
-
Panasonic EB-GD30 - page 55
The Serial Number can be found on the outside of the phone under the battery. For your convenience we recommend that you note the following details as a record of your purchase. Part Number Serial Number Dealer Name Purchase Date BULL CP8 PATENT © Matsushita Communication Industrial UK Limited 1999 Information in this document is subject to change ...
-
Panasonic EB-GD30 - page 56
Printed in UK www.mcuk.panasonic.co.uk 991004 7LB270A ...
Avez-vous une question à propos de Panasonic EB-GD30?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Panasonic EB-GD30, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Panasonic EB-GD30 il est probable qu’il a envie de partager la façon de le résoudre.