-
Compaq HW191 - page 1
19 inch Wide Screen TFT LCD Monitor HW191 USER’S MANUAL ...
-
Compaq HW191 - page 2
User’s Manual Before operating the monitor, please read th is manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference S t atement This equipment has been tested and found to comp ly with the limit s for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designe ...
-
Compaq HW191 - page 3
User’s Manual Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirement s in the world. This makes for a high performance product, designed with the user in focus that also mini ...
-
Compaq HW191 - page 4
User’s Manual Recycling Information We, Hanns.G care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable materials, which can be re-dec omposed and re-integrated int ...
-
Compaq HW191 - page 5
User’s Manual T ABLE OF CONTENTS SAFETY NOTICE ........................................................................................... 6 PRECAUTIONS ......................................................................................... 6 SPECIAL NOTES ON LCD MONIT ORS ................................................... 7 BEFORE YOU OPERA T ...
-
Compaq HW191 - page 6
User’s Manual SAFETY NOTICE 1. The changes or modifications not expr essly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord , if any , must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for an ...
-
Compaq HW191 - page 7
User’s Manual SPECIAL NOTES ON LCD MONIT ORS The following symptoms are normal with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen may flicker during initial use. T urn off the Power Switch and then turn it on agai n to make sure the flicker disappears. • Y ou may find slightly uneven brigh ...
-
Compaq HW191 - page 8
User’s Manual BEFORE YOU OPERA TE THE MONITOR FEA TURES • 19” Wide screen TFT Color LCD Monitor • Crisp, Clear Display for Windows • Recommended Resolutions : 1440 X 900 @60Hz • EP A ENERGY ST AR ® • Ergonomic Design • S pace Saving, Comp act Case Design CHECKING THE CONTEN TS OF THE P ACKAGE The product package should include the ...
-
Compaq HW191 - page 9
User’s Manual INST ALLA TION INSTRUCTIONS Inst all Remove Figure.1. Installing and Removing the Base INSTALLATION: 1. Align the monitor with the opening in the base. 2. Note that the longer secti on of the base points forward. 3. Snap the monitor into its base. A clear c lick sound will affirm that the base is connected correctly. 4. Verify that ...
-
Compaq HW191 - page 10
User’s Manual MAKING CONNECTIONS CONNECTING TO A PC: T urn of f your computer before performing the procedure below . 1. Connect one end of the D-Sub cable to the back of the monitor and connect the other end to the computer ’s D-Sub port. 2. Connect one end of the DVI- D cable (Dual input mode opti onal) to the back of the monitor and connect ...
-
Compaq HW191 - page 11
User’s Manual ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of t he monitor , then adjust the monitor ’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor ’s angle. • Y ou are able to adjust t he monitor ’s angle from 0 ° to 20 ° ...
-
Compaq HW191 - page 12
User’s Manual OPERA TING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other contro l buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the Sign ...
-
Compaq HW191 - page 13
User’s Manual FRONT P ANEL CONTROL • Power Button: Press this button to switch ON/OFF of monitor ’s power . • Power Indicator: Green — Power On mode. Orange — Power saving mode. • MENU / ENTER: 1. Activates the OSD menu or confirms adjustments to settings. 2. Exit OSD volume display when in volume OSD status. • Volum e▲/▼ : 1. A ...
-
Compaq HW191 - page 14
User’s Manual HOW TO ADJUST A SETTING M M a a i i n n M M e e n n u u FUNCTION DESCRIPTION Brightness Select the 「 Brightness 」 option on the 「 Main Menu 」 . Enter the option by pressing the 「 Menu 」 button again, and adjust the level. Contrast Select the 「 Contrast 」 option on the 「 Main Menu 」 . Enter the option by pressing ...
-
Compaq HW191 - page 15
User’s Manual Phase Adjustment Select the 「 Phase Adjustment 」 option to reduce the horizontal flicker of characters on the screen. Enter the option and adjust the level. Exit Exit the OSD menu function. C C o o l l o o r r S S e e t t t t i i n n g g FUNCTION DESCRIPTION 5500K/6500K/ 9300K Move the cursor to one of t he preset options and se ...
-
Compaq HW191 - page 16
User’s Manual OSD Color Select the 「 OSD Color 」 setting option to adjust t he color of the OSD. Enter the option and adjust the level. Language Select the 「 Language 」 option to change the language of the OSD. Enter the option and select a language. (Reference only , the OSD Langua ge is depended on selected model) Exit Exit the OSD menu ...
-
Compaq HW191 - page 17
User’s Manual PLUG AND PLA Y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B cap abilities ac cording to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional info rmation about its display cap abilities. The DDC2B is a bidirec ...
-
Compaq HW191 - page 18
User’s Manual TECHNICAL SUPPORT (F AQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position *Power Cord should be connected No Plug & Play *Check if the PC system is Plug & Play compatible *Check if the V ideo Card is Plug & Play compatible *Check ...
-
Compaq HW191 - page 19
User’s Manual ERROR MESSAGE & PO SSIBLE SOLUTIONS CABLE NOT CONNECTED : 1. Check that the signal-cable is properly con nected, If the connector is loose, tighten the connector ’s screws. 2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuitable di splay mode, set the compu ...
-
Compaq HW191 - page 20
User’s Manual APPENDIX SPEC IFICA TIONS Driving system TFT Color LCD LCD Panel Size 48.2cm(19.0") Pixel pitch 0.283mm(H) x 0.283mm(V) V ideo H-Frequency 31KHz – 80KHz V -Frequency 56 – 75Hz Display Colors 16.2M Colors Maximum Screen Size Hor. :408.24mm; V er . :255.15mm Max. Resolution 1440 x 900 @75Hz Plug & Play VESA DDC2B TM ON Mo ...
Avez-vous une question à propos de Compaq HW191?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Compaq HW191, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Compaq HW191 il est probable qu’il a envie de partager la façon de le résoudre.