Français dropdown-ico

Manuel d’utilisation JVC HR-VP634U

60 pages 1.8 mb
Télécharger

Aller à la page of 60

Summary
  • JVC HR-VP634U - page 1

    H R-VP634U VIDEO CASSETTE RECORDER INSTRUCTIONS PU30425-1786 For Customer Use: Enter below the Serial No. which is located on the rear of cabinet. Retain this information for future reference.  Model No. HR-VP634U  Serial No. POWER 2 2 REW   FF   PLAY VIDEO (MONO) L – AUDIO – R MENU CH OK q REC 5 / 8 STOP/EJECT ...

  • JVC HR-VP634U - page 2

    2 Dear Customer , Thank you for purchasing the JVC VHS video cassette recorder . Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new VCR. CAUTIONS W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION: This video cassette recorder sh ...

  • JVC HR-VP634U - page 3

    3 IMPOR T ANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety . In order not to defeat the built-in safeguards, observe the following basic rules for its install ...

  • JVC HR-VP634U - page 4

    4 SERVICING 1. Servicing If your product is not operating correctly or exhibits a marked change in performance and you are unable to restore normal operation by following the detailed procedure in its operating instructions, do not attempt to service it yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Ref ...

  • JVC HR-VP634U - page 5

    5 CONTENTS T IMER RECORDING 36 VCR Plus+ Timer Programming ............ 36 Enter Program Information .............................. 36 Instant Timer Recording (ITR) ............... 38 On-Screen Timer Programming ........... 38 Check And Cancel Programs .......................... 40 Auto T imer ...................................................... ...

  • JVC HR-VP634U - page 6

    6 INST ALLING YOUR NEW VCR CHECK CONTENTS 1 Make sure the package contains all of the accessories listed in “SPECIFICA TIONS” ( Z pg. 56). SITUA TE VCR 2 Place the VCR on a stable, horizontal surface. CONNECT VCR TO TV 3 The connection method you use depends on the type of TV you have. RF Connection ● T o Connect T o A TV With NO A V Input T ...

  • JVC HR-VP634U - page 7

    7 INITIAL SETTINGS Dual Quick Set With the antenna cable connected the Dual Quick Set function allows the clock and tuner to be set automatically when the power plug is first connected to an AC outlet. The time and date can be set automatically from clock setting data that is transmitted by one of the regular TV broadcast channels. W e call this TV ...

  • JVC HR-VP634U - page 8

    8  12 45 3 6 8 0 7 9   INITIAL SETTINGS (cont.) Clock 2 2 q5 / 8 6 POWER OK MENU MAIN MENU PROGRAM SET FUNCTION SET TUNER SET = CUSTOM SET AUTO PICTURE PRESS ( 5 , ∞ ), THEN (OK) PRESS (MENU) TO END CH 5∞ Preparation TURN ON THE VCR 1 Press POWER . If watching channel 3 or 4, press TV/VIDEO to select the VIDEO mode. VIDEO is displayed ...

  • JVC HR-VP634U - page 9

    9  12 45 3 6 8 0 7 9   2 2 q5 / 8 6 CH MENU OK CH OK MENU SHUTTLE PLUS Clock Setting This step must be performed before going on to Auto, Semi-Auto or Manual clock setting procedures (each starts from step 2 ). ACCESS MODE SELECT SCREEN 1 Place the arrow at the Custom Set screen next to “OVERRIDE AUT O CLOCK SET” by pressing CH 5 ∞ o ...

  • JVC HR-VP634U - page 10

    10  12 45 3 6 8 0 7 9   SELECT TIME ZONE 5 Y ou can either select “AUT O”, or select the correct zone. If you selected "AUT O" in step 4 and if you live near the boundary of an adjacent time zone, or receive cable TV channels, a PBS channel from a different time zone may become your host channel. Therefore, in this case make ...

  • JVC HR-VP634U - page 11

    11  12 45 3 6 8 0 7 9   2 2 q5 / 8 6 CH MENU OK CH OK MENU NUMBER SHUTTLE PLUS Manual SELECT MODE 2 At the Override Auto Clock Set screen, place the arrow next to “MANUAL CLOCK SET” by pressing CH ▲▼ or SHUTTLE PLUS 5 ∞ , then press OK . SET DA TE, TIME AND D.S.T . 3 The Manual Clock Set screen is displayed and the first setting ...

  • JVC HR-VP634U - page 12

    12 T uner Set Receivable Channels TURN ON THE VCR 1 Press POWER . If watching on channel 3 or 4, press TV/ VIDEO to select the VIDEO mode. VIDEO is displayed on the front display panel. ACCESS MAIN MENU SCREEN 2 Press MENU as many times as necessary . ACCESS TUNER SET SCREEN 3 Place the arrow next to "TUNER SET" by pressing CH 5 ∞ or SH ...

  • JVC HR-VP634U - page 13

    13 PERFORM AUTO CHANNEL SET 6 Place the arrow next to "AUT O CHANNEL SET" by pressing CH 5 ∞ or SHUTTLE PLUS 5 ∞ , then press OK . Receivable channels in your area are automatically assigned to the CH 5 ∞ buttons, and non-receivable channels are skipped. NOTES: ● At the end of Auto Channel Set, “SCAN COM- PLETED” appears on sc ...

  • JVC HR-VP634U - page 14

    14 Add Or Delete A Channel ACCESS TUNER SET SCREEN 1 Access by performing steps 2 and 3 of the T uner procedure on page 12. ● T o add a channel, go to step 2 . ● T o delete a channel, skip to step 4 . ACCESS AFC SCREEN 2 Place the arrow next to "AFC" by pressing CH 5 ∞ or SHUTTLE PLUS 5 ∞ , then press OK . MAKE SELECTION 3 Place t ...

  • JVC HR-VP634U - page 15

    15 This procedure is required if you receive your TV channels through a cable box (descrambler). The Cable Box Controller allows the VCR to automatically switch cable box channels, allowing you to timer -record programs from various cable stations. The Cable Box Controller is effective for recording shows that have been programmed using VCR Plus+ ( ...

  • JVC HR-VP634U - page 16

    16 Set Cable Box Output Channel  12 45 3 6 8 0 7 9   2 2 q5 / 8 6 CH MENU OK CH MENU SHUTTLE PLUS POWER POWER OK TV/VIDEO TURN ON THE VCR 1 Press POWER . If watching channel 3 or 4, press TV/ VIDEO to select the VIDEO mode. VIDEO is displayed on the front display panel. ACCESS MAIN MENU SCREEN 2 Press MENU as many times as necessary . ACCE ...

  • JVC HR-VP634U - page 17

    17 SELECT CABLE BOX OUTPUT CHANNEL 6 Y our selection depends on how your cable box is connected to your VCR. If your cable box is connected to your VCR using an RF connection . . . . . . press CH 5 ∞ or SHUTTLE PLUS 5 ∞ to place the arrow next to the channel number representing the cable box’ s output (2–6). If your cable box is connected t ...

  • JVC HR-VP634U - page 18

    18 RETURN TO NORMAL SCREEN 4 Press MENU as many times as necessary . Y ou can now set up the VCR Plus+ feature ( Z pg. 19). CABLE BOX BRAND LIST BRAND CODE ARCHER 52, 53, 54, 85, 86 CABLEVIEW 85, 86 CITIZEN 85, 86 CURTIS 13, 14, 15, 16 DIAMOND 52, 53, 54 EAGLE 30, 31, 32, 33, 34, 35, 36, 37 EASTERN 51 GC BRAND 85, 86 GEMINI 55, 56 GENERAL ELECTRIC ...

  • JVC HR-VP634U - page 19

    19 The VCR Plus+ timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the PlusCode number for the TV program you wish to record (found in most TV listings) and the VCR’ s timer is automatically programmed. Depending on the TV or cable stations that you ...

  • JVC HR-VP634U - page 20

    20 ACCESS CUSTOM SET SCREEN 3 Press CH 5 ∞ or SHUTTLE PLUS 5 ∞ to place the arrow next to “CUST OM SET”, then press OK . ACCESS VCR PLUS+ SET -UP SCREEN 4 Press CH 5 ∞ or SHUTTLE PLUS 5 ∞ to place the arrow next to “VCR PLUS+ SET -UP”, then press OK . ACCESS GUIDE CHANNEL SET SCREEN 5 Press CH 5 ∞ or SHUTTLE PLUS 5 ∞ to place th ...

  • JVC HR-VP634U - page 21

    21 INPUT RECEIVING CHAN- NEL NUMBER 7 Press CH 5 ∞ , SHUTTLE PLUS 5 ∞ or the appropriate NUMBER keys to input the number of the channel on which the Guide Channel’ s broadcasts are received. Then press OK . ● If there is more than one mismatch, repeat steps 6 and 7 for each instance. RETURN TO VCR PLUS+ SET -UP SCREEN 8 Press MENU . CHECK I ...

  • JVC HR-VP634U - page 22

    22  12 45 3 6 8 0 7 9   SIMPLE PLA YBACK AND RECORDING LOAD A CASSETTE 1 Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. Don’t apply too much pressure when inserting. ● The VCR’ s power comes on automatically . ● If watching channel 3 or 4, p ...

  • JVC HR-VP634U - page 23

    23 Simple Recording  12 45 3 6 8 0 7 9   2 2 q5 / 8 6 NUMBER SP/EP PAUSE STOP REC PLAY PAUSE REC STOP/EJECT PLAY LOAD A CASSETTE 1 Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette. SELECT RECORDING CHANNEL 2 Press CH 5 ∞ . Or press the appropriate NUMBER keys, then press E ...

  • JVC HR-VP634U - page 24

    24 Auto Picture PLA YBACK AND RECORDING FEA TURES Y our VCR is equipped with the Auto Picture feature, which checks the condition of the tape and compensates accordingly , giving you the best-possible playback picture every time. The default setting is "ON".  12 45 3 6 8 0 7 9   2 2 q5 / 8 6 POWER OK CH POWER TV/VIDEO MENU OK MEN ...

  • JVC HR-VP634U - page 25

    25 Playback The VCR assesses the quality of the tape once you initiate playback. Before beginning, perform steps 1 and 2 on page 22.  12 45 3 6 8 0 7 9   2 2 q5 / 8 6 PLAY ST ART PLA YBACK 1 Press PLA Y . ● The VCR adjusts the playback picture quality based on the quality of the tape in use. ● The Auto Picture screen only appears at th ...

  • JVC HR-VP634U - page 26

    26 P AUSE DURING PLA YBACK 1 Press P AUSE . If there is vertical jitter , press CH 5 or ∞ on the VCR's front panel or remote to stabilize the picture. FRAME-BY -FRAME PLA YBACK 2 Advance the tape one frame by pressing P AUSE again. ● T o control the direction of Frame-by-Frame playback, press SHUTTLE PLUS ™ or £ during still picture mod ...

  • JVC HR-VP634U - page 27

    27 Manual T racking Once playback begins, the VCR’ s automatic tracking function is engaged. If noise appears in the picture, you can override this and make the adjustment manually . ENGAGE MANUAL TRACKING MODE 1 During playback, press the CH 5 ∞ buttons on the VCR's front panel simultaneously to cancel the automatic tracking mode and enab ...

  • JVC HR-VP634U - page 28

    28 Select The Soundtrack Y our VCR can record two soundtracks simultaneously (Normal and Hi-Fi) and play back the selected one, or both together . ACCESS MAIN MENU SCREEN 1 Press MENU during playback or when VCR is in stop mode. ● If the VCR Plus+ screen appears press MENU again. ACCESS FUNCTION SET SCREEN 2 Place the arrow next to "FUNCTION ...

  • JVC HR-VP634U - page 29

    29 Superimpose This function, switchable between ON and OFF , determines whether or not operational indicators will appear on screen. ACCESS MAIN MENU SCREEN 1 Press MENU as many times as necessary . ACCESS FUNCTION SET SCREEN 2 Place the arrow next to "FUNCTION SET" by pressing CH 5 ∞ or SHUTTLE PLUS 5 ∞ , then press OK . ACCESS SUPE ...

  • JVC HR-VP634U - page 30

    30 Skip Search Repeat Playback ST ART REPEA T 1 Press and hold PLA Y (until "PLA Y" blinks on the front display panel) during playback, then release. ● The entire tape is played back 20 times. STOP REPEA T 2 T o stop, press STOP at any time. NOTE: Pressing PLA Y , REW , FF , P AUSE or SHUTTLE PLUS ™ or £ also stops Repeat Playback. I ...

  • JVC HR-VP634U - page 31

    31 Instant ReV iew At the press of a button, you can power up your VCR, rewind the tape and begin viewing the most recent timer -recorded program. ACTIV A TE INST ANT REVIEW 1 After ensuring that the VCR is off and the T imer mode is disengaged, press REVIEW . ● The power comes on and the VCR searches for the index code indicating the start of th ...

  • JVC HR-VP634U - page 32

    32 COUNT 0:33:27 T ape Position Indicator The T ape position indicator appears on screen when, from the stop mode, you press FF , REW or perform an Index Search or Instant ReV iew . The position of " " in relation to "B" (Beginning) or "E" (End) shows you where you are on the tape. NOTE: "SUPERIMPOSE" must be ...

  • JVC HR-VP634U - page 33

    33 2 2 q5 / 8 6 OK CH ACCESS FUNCTION SET SCREEN 4 Press CH 5 ∞ or SHUTTLE PLUS 5 ∞ to place the arrow next to “FUNCTION SET”, then press OK . ACCESS SPECIAL FUNCTION SCREEN 5 Press CH 5 ∞ or SHUTTLE PLUS 5 ∞ to place the arrow next to “SPECIAL FUNCTION”, then press OK . ENABLE A V COMPU LINK PLA YBACK 6 Press CH 5 ∞ or SHUTTLE PL ...

  • JVC HR-VP634U - page 34

    34 PLA YBACK AND RECORDING FEA TURES (cont.) Record One Program While W atching Another ENGAGE TV MODE 1 During recording... ● If using the RF connection ( Z pg. 6), press TV/VIDEO . The VCR's VIDEO indicator goes out and the TV broadcast being recorded disappears. ● If using the A V connection ( Z pg. 6), change the TV's input mode f ...

  • JVC HR-VP634U - page 35

    35  12 45 3 6 8 0 7 9   2 2 q5 / 8 6 CH MENU OK CH OK MENU SHUTTLE PLUS Stereo And SAP (Second Audio Pr ogram) Y our VCR’ s built-in MTS decoder enables reception of Multi- channel TV Sound broadcasts. ● The ST indicator on the front display panel lights during stereo broadcast reception, and SAP lights during SAP program reception. ? ...

  • JVC HR-VP634U - page 36

    36 VCR Plus+ Timer Pr ogramming  12 45 3 6 8 0 7 9   2 2 q5 / 8 6 MENU OK OK MENU NUMBER NUMBER "9" NUMBER "8" TIMER TV/VIDEO CANCEL TIMER RECORDING LOAD A CASSETTE 1 Make sure the record safety tab is present. ● The VCR’ s power comes on automatically . ● If you’re watching on channel 3 or 4, press TV/VIDEO to ...

  • JVC HR-VP634U - page 37

    37  12 45 3 6 8 0 7 9   2 2 q5 / 8 6 CH OK CH OK MENU TIMER SHUTTLE PLUS SET T APE SPEED 5 Press SP/EP . CHECK/CORRECT INPUT DA T A 6 If the data is correct as it is, go to step 7 . If not, press OK or SHUTTLE PLUS ™£ until the item you want to change begins to blink. Then press the appropriate NUMBER keys, CH 5 ∞ or SHUTTLE PLUS 5 ? ...

  • JVC HR-VP634U - page 38

    38 TIMER RECORDING (cont.) Instant Timer Recording (ITR) This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the VCR off after recording is finished. ST ART RECORDING 1 Press REC . ENGAGE ITR MODE 2 Press REC again. ITR blinks and 0:30 appears on the front display panel. SET RECORDING DURA T ...

  • JVC HR-VP634U - page 39

    39  12 45 3 6 8 0 7 9   2 2 q5 / 8 6 CH MENU OK CH OK MENU NUMBER NUMBER "9" NUMBER "8" TIMER SHUTTLE PLUS SELECT PROGRAM NUMBER 3 Press the appropriate NUMBER keys or CH 5 ∞ or SHUTTLE PLUS 5 ∞ to select a vacant program number , then press OK . The first time you do this, all numbers will be vacant, so just press ...

  • JVC HR-VP634U - page 40

    40 TIMER RECORDING (cont.) DISENGAGE TIMER 1 Press TIMER , then press POWER . ACCESS PROGRAM SET SCREEN 2 Press MENU , then press OK . CHECK PROGRAM INFOR- MA TION 3 Press CH 5 ∞ or SHUTTLE PLUS 5 ∞ to check the programs in succession. Check And Cancel Pr ograms CANCEL A PROGRAM 4 Press CANCEL . ● Repeat steps 3 and 4 as many times as necessa ...

  • JVC HR-VP634U - page 41

    41 Auto Timer When activated, this function automatically engages the timer when the VCR's power is turned off, and disengages it when the power is turned on. ACCESS MAIN MENU SCREEN 1 Press MENU as many times as necessary . ACCESS FUNCTION SET SCREEN 2 Place the arrow next to "FUNCTION SET" by pressing CH 5 ∞ or SHUTTLE PLUS 5 ∞ ...

  • JVC HR-VP634U - page 42

    42 Edit T o Or Fr om Another VCR Y ou can use your VCR as the player or the recorder . MAKE CONNECTIONS 1 Connect an A V cable (not supplied) between the player ’ s VIDEO OUT and AUDIO OUT connectors and the recorder’s VIDEO IN and AUDIO IN connectors. ● When using your VCR as the recorder and a monaural VCR as the player , connect the player ...

  • JVC HR-VP634U - page 43

    43 2 2 q5 / 8 6 Edit Fr om A Camcorder Y ou can use a camcorder as the player and your VCR as the recorder . AUDIO IN VIDEO IN Camcorder Player VIDEO OUT AUDIO OUT  12 45 3 6 8 0 7 9   CH MENU OK NUMBER "0" SHUTTLE PLUS Recorder Y our VCR Editing cable (not supplied) (JVC camcorder only) EDIT T o rear panel P AUSE/A V COMPU-LINK ...

  • JVC HR-VP634U - page 44

    44 ACCESS AUX INPUT SCREEN 9 Press CH 5 ∞ or SHUTTLE PLUS 5 ∞ to place the arrow next to “AUX INPUT”, then press OK . SELECT INPUT 10 If you are connecting the A V cable to the AV connectors on the front of the VCR , place the arrow next to "FRONT" by pressing CH 5 ∞ or SHUTTLE PLUS 5 ∞ . If you are connecting the A V cable to ...

  • JVC HR-VP634U - page 45

    45 Assemble Editing Assemble Editing adds one recorded scene to another in succession. T o use your VCR as the recorder ... LOAD CASSETTES 1 Insert the original cassette in the player , and the recording cassette in the recorder . SET T APE SPEED 2 Set to "SP" or "EP" by pressing the SP/EP button on the remote control. ENGAGE RE ...

  • JVC HR-VP634U - page 46

    46 SPECIAL FEA TURES  12 45 3 6 8 0 7 9   POWER NUMBER ENTER CH VOL. +/- TV/VIDEO STOP TV/CABLE/VCR TV Multi-Brand Remote Contr ol The VCR's remote control can control several functions on JVC remote control TVs and on the brands of remote control TVs listed below . TURN ON THE TV 1 T urn the power on using the TV's remote contro ...

  • JVC HR-VP634U - page 47

    47  12 45 3 6 8 0 7 9   POWER NUMBER ENTER CH STOP TV/CABLE/VCR Cable Box Multi-Brand Remote Contr ol The VCR's remote control can control functions on the brands of cable boxes listed below . Some cable box brands have more than one code. If your cable box does not function with a specified code, try other codes. CABLE BOX BRAND NAME ...

  • JVC HR-VP634U - page 48

    48 SPECIAL FEA TURES (cont.) Contr ol T wo JVC VCRs The supplied remote control is capable of controlling two JVC VCRs independently using the A/B CODE switch. Y ou can set this VCR so it responds to remote commands only when the switch is set to B , and another VCR so it responds to commands when the switch is set to A . The switch is preset to A ...

  • JVC HR-VP634U - page 49

    49 TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your VCR off for repair . POWER POSSIBLE CAUSE ● The power cord is disconnected. ● The TIMER mode is engaged with Auto T imer set to &q ...

  • JVC HR-VP634U - page 50

    50 TROUBLESHOOTING (cont.) CORRECTIVE ACTION Insert a cassette. Remove the cassette and cover the hole with adhesive tape, or load a cassette on which the record safety tab is intact. Set the VCR to the appropriate channel. Refer to the directions and the illustration under “Edit to And From Another VCR” ( Z pg. 42) or “Edit From A Camcorder? ...

  • JVC HR-VP634U - page 51

    51 8. T imer recording begins as sched- uled, but the channel is always incorrect. 9. W e moved, and now VCR Plus+ doesn’t work properly . 10. “PROGRAM FULL” is displayed on the VCR Plus+ screen. ● Even though you don't use an external Cable Box, "CABLE BOX OUTPUT" is set to "ON". ● The receivable stations in the ...

  • JVC HR-VP634U - page 52

    52 QUESTIONS AND ANSWERS PLA YBACK Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the VCR indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads. Q. During search, slow , still and frame-by-frame playback, I ...

  • JVC HR-VP634U - page 53

    53 INDEX List Of T erms This guide serves as a quick way to locate frequently used terms and on-screen display names. The first page on which the term appears is listed. Most terms appear more than once in the instruction manual. A A/B Code .................................................................... 48 Add Channel ......................... ...

  • JVC HR-VP634U - page 54

    54 INDEX (cont.) FRONT VIEW 1 Power ON/OFF Button ( Z pg. 8) 2 Cassette Loading Slot 3 Rewind Button ( Z pg. 22) Reverse Search Button ( Z pg. 26) 4 Play Button ( Z pg. 22) 5 Fast-Forward Button ( Z pg. 22) Forward Search Button ( Z pg. 26) 6 V ideo Input Connector ( Z pg. 43) 7 Mono Audio Input Connector ( Z pg. 43) Audio Input Connector [L] ( Z p ...

  • JVC HR-VP634U - page 55

    55 FRONT DISPLA Y P ANEL 1 V ideo Mode Indicator ( Z pg. 8) 2 Instant T imer Recording Indicator ( Z pg. 38) 3 T imer Mode Indicator ( Z pg. 39) 4 Clock Display ( Z pg. 7) 5 Counter Display ( Z pg. 31) 6 Multichannel TV Sound Indicators ( Z pg. 35) 7 Recording Mode Indicator ( Z pg. 23) 8 Play Mode Indicator ( Z pg. 22) 9 “Cassette Loaded” Mark ...

  • JVC HR-VP634U - page 56

    56 GENERAL Power requirement : AC 120 V ` , 60 Hz Power consumption : 21 W T emperature Operating : 5°C to 40°C (41°F to 104°F) Storage : –20°C to 60°C (–4°F to140°F) Operating position : Horizontal only Dimensions (W x H x D) : 360 x 94 x 276 mm (14-3/16" x 3-3/4" x 10-7 /8") W eight : 3.4 kg (7.5 lbs) Format : VHS NTSC ...

  • JVC HR-VP634U - page 57

    57 HOW TO LOCA TE YOUR JVC SERVICE CENTER TOLL FREE: 1-800-252-5722 JVC SERVICE & ENGINEERING COMP ANY OF AMERICA DIVISION OF US JVC CORP . F ACTOR Y SER VICE CENTER LOCA TIONS If you ship the product... ACCESSORIES 107 Little Falls Road 1500 Lakes Parkway 705 Enterprise Street Fairfield, NJ 07004-2105 Lawrenceville, GA 30243-5357 Aurora, IL 60 ...

  • JVC HR-VP634U - page 58

    58 LIMITED WARRANTY CONSUMER VIDEO 1-90 JVC COMP ANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONL Y TO THE ORIGINAL PURCHASER A T RET AIL to be FREE FROM DEFECTIVE MA TERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below . ("The Warranty Period") THIS LIMIT ...

  • JVC HR-VP634U - page 59

    59 ...

  • JVC HR-VP634U - page 60

    HR-VP634U COPYRIGHT © 1996 VICTOR COMPANY OF JAPAN, LTD. U Printed in Malaysia 0296HOV * UN * PJ JV C COMP ANY OF AMERIC A DIVISION OF US JVC CORP . 41 Slater Drive, Elmwood Park, N .J . 07407 ...

Fabricant JVC Catégorie VCR

Les documents que nous recevons du fabricant de l'appareilJVC HR-VP634U peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques JVC
- manuels d’utilisations HR-VP634U
- fiches produit JVC
- dépliants
- ou étiquettes-énergie JVC HR-VP634U
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation JVC HR-VP634U.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation JVC HR-VP634U, manuels d’entretien, brefs manuels ou manuels de l’utilisateur JVC HR-VP634U. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit JVC HR-VP634U.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil JVC HR-VP634U, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser JVC HR-VP634U par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs JVC HR-VP634U.

Le manuel d’utilisation complet JVC, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel JVC HR-VP634U - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières JVC HR-VP634U, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lJVC HR-VP634U qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil JVC HR-VP634U - qui devraient nous aider dans les premières étapes lors de l'utilisation JVC HR-VP634U
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de JVC HR-VP634U
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service JVC HR-VP634U dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de JVC HR-VP634U?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec JVC HR-VP634U, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec JVC HR-VP634U il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)