Français dropdown-ico

Manuel d’utilisation Russound ST2S

40 pages 3.64 mb
Télécharger

Aller à la page of 40

Summary
  • Russound ST2S - page 1

    ST2S Smar t T uner Installation Manual ...

  • Russound ST2S - page 2

    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER - SERVICEABLE P ARTS INSIDE. REFER SER- VICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to ...

  • Russound ST2S - page 3

    T ABLE OF CONTENTS Pr oduct Introduction ..........................................................................................................................4-5 Component Guide ST2S Front Panel ................................................................................................................................6 ST2S Rear Panel .... ...

  • Russound ST2S - page 4

    4 INTRODUCTION DESCRIPTION Thank you for choosing the Russound ST2S Smart T uner . Whether you are adding radio to an existing system, expanding a CAi Series system or taking advantage of the CAV6.6’ s robust RNET ® communication link, the ST2S T uner is designed to meet your needs. The ST2S T uner is like having two radios in one. The AM/FM tun ...

  • Russound ST2S - page 5

    5 INTRODUCTION INST ALLA TION APPLICA TIONS RNET -enabled System When the ST2S T uner is used with an RNET- enabled device such as the CAV6.6 and is con- nected to it through the Link In or Link Out port, the tuner will be controlled by the CA V6.6 through the UNO-S2 keypad. Thr ough RNET , tuner information such as T uner 1 or 2, station frequency ...

  • Russound ST2S - page 6

    6 COMPONENT GUIDE ST2S FRONT P ANEL Mode Band Mode Band ESPN Radio ESPN Radio DROP-DOWN COVER - Hinged see-through cover pr otects the selection buttons on the tuner MAIN POWER SWITCH - T urns power on and off BANK SELECT BUTTON - Selects bank 1-6 MEMORY SELECT BUTTONS - Sets and selects memory pr esets 1-6 for each bank POWER ON/OFF LED - Indicate ...

  • Russound ST2S - page 7

    LR RNET Link RS232 Interface 1 Keypad 2 FM Coax 75 Ω Loop Antenna GND AM Tuner 2 IR LR Power 12VDC 1.25A Serial Tuner 1 IR ST2 Smart Tuner Designed in USA Made in China In Out RNET LINK IN/LINK OUT - Links to other Russound components that are RNET compatible, displays frequency and other information on the UNO keypads RS-232 INTERF ACE - The RS- ...

  • Russound ST2S - page 8

    8 TUNE TUNE FAV 1 SEEK ST/ MONO LOC/ DX SEEK TUNE TUNER 1 TUNER 2 4 M E M B A N K 123 56 789 0 PWR MEM TUNE AM/FM FAV 2 OK POWER - Puts the tuner in/out of standby mode TUNER CONTROL - Select TUNER 1 (SIRIUS) or TUNER 2 (AM/FM) and all subsequent button presses affect that tuner NUMERIC INPUT - Number buttons for direct selection of station, channe ...

  • Russound ST2S - page 9

    9 Power T o power the tuner , connect the 12VDC external power supply by inserting the power supply jack into the power supply connection on the tuner’ s rear panel. Audio Output Connect one end of a dual RCA audio cable to the T uner 1 Audio Output connection. Keep prop- er channel identity . Attach the other end of the RCA cables to the source ...

  • Russound ST2S - page 10

    10 LR RNET Link RS232 Interface 1 Keypad 2 FM Coax 75 Ω Loop Antenna GND AM T uner 2 IR LR Pow er 12VDC 1.25A Serial T uner 1 IR ST2 Smart T uner Designed in USA Made in China In Out 1 R L 2 1 R L 2 34 CA6.4i NEWMARKET , NH U.S.A. ~110VAC ~220-240VAC ~50-60Hz 400W VOLTAGE 110V 220-240V FUSE F4A F2A K EYPAD P ORTS Z ONE P REAMP O UTPUTS 123456 O U ...

  • Russound ST2S - page 11

    ST2S SETUP AND CONNECTIONS CA V6.6 SERIES CONNECTIONS LR RNET Link RS232 Interface 1 Keypad 2 FM Coax 75 Ω Loop Antenna GND AM T uner 2 IR LR Power 12VDC 1.25A Serial Tu ne r 1 IR ST2 Smart T uner Designed in USA Made in China In Out ST2 T une r CA V6.6 UNO-S2 keypads RCA Cable 99:Horizons Sirius antenna T uner 1 is Source 1 T uner 2 is Source 2 ...

  • Russound ST2S - page 12

    12 ST2S SETUP AND CONNECTIONS ANTENNA CONNECTIONS AM Antenna Connect the included loop antenna for AM recep- tion to the back panel, attaching the GND (ground) and AM ends to the appr opriate con- nections for T uner 2. It is recommended to use an external outdoor or attic-mounted long wire antenna for best per- formance for AM reception. Use a 75- ...

  • Russound ST2S - page 13

    13 ST2S SETUP AND CONNECTIONS ANTENNA CONNECTIONS SIRIUS Signal Strength Mode T o test the SIRIUS signal reception, turn the unit on. When the SIRIUS radio is powered for the first time, the SIRIUS service will start playing Preview Channel 184, a pr eview/promotional channel. V erify that Channel 184 is playing by pressing the T une Up/T une Down ...

  • Russound ST2S - page 14

    14 ST2S SETUP AND CONNECTIONS ANTENNA CONNECTIONS Gr ounding an Outdoor Antenna If the tuner is used with an outdoor antenna, the antenna must be grounded against static char ges and voltage sur ges. Consult the instructions that came with the antenna or contact the antenna manu- facturer for pr oper installation instructions. The diagram gives a g ...

  • Russound ST2S - page 15

    15 SIRIUS Radio Activation SIRIUS Radio delivers over 120 channels of digital entertainment - 65 channels with 100% commer- cial-free music and 55 channels of news, sports and entertainment. SIRIUS radio is a subscription- based service with a monthly provider fee and an activation char ge. Billing and activation are done directly thr ough SIRIUS. ...

  • Russound ST2S - page 16

    16 SIRIUS Radio Modes There ar e six user “modes” for selecting music, viewing music information, retrieving ID and locking channels on the SIRIUS T uner: Preset (default or normal) Category Search Now Playing Display Prefer ences SIRIUS ID Channel Lock These modes are accessed thr ough cer tain button and key pr esses from the tuner panel, r e ...

  • Russound ST2S - page 17

    17 ST2S OPERA TION SIRIUS RADIO MODES ST2S ST2-RC ST2-KP UNO-S2 UNO-LRC1 Preset Mode Next Preset MEM Previous Pr eset MEM Next Bank Hold Hold Hold Previous Bank Hold Hold Hold Channel Up TUNE Channel Down TUNE Preset (default) Mode This is the normal operating mode of the SIRIUS tuner . In this mode the SIRIUS tuner operates similar- ly to the AM/F ...

  • Russound ST2S - page 18

    18 ST2S ST2-RC ST2-KP UNO-S2 UNO-LRC1 Category Search Mode Mode Band OK Next Category MEM Previous Category MEM Category Channel Up TUNE Category Channel Down TUNE ST2S OPERA TION SIRIUS RADIO MODES Category Search Mode ( 1 1 . . C C A A T T S S E E A A R R C C H H ) (continued) Next Category This button press accesses the next category fr om the c ...

  • Russound ST2S - page 19

    19 ST2S ST2-RC ST2-KP UNO-S2 UNO-LRC1 Display Prefer ence Mode Mode Band OK Next Display Prefer ence TUNE MEM MEM Previous Display Pr eference TUNE MEM MEM ST2S OPERA TION SIRIUS RADIO MODES Display Prefer ence Mode ( 3 3 . . D D S S P P L L Y Y P P R R E E F F ) This mode allows you to choose how SIRIUS channel information will be displayed on the ...

  • Russound ST2S - page 20

    ST2S OPERA TION SIRIUS RADIO MODES Channel Lock Mode ( 5 5 . . C C H H A A N N L L O O C C K K ) This mode allows you to lock/unlock a channel or channels to prevent audio access. This par ental control is set/clear ed with a four-digit code entered using the UNO-LRC1 or ST2-RC r emote controls. Channel to be locked/unlocked must be selected before ...

  • Russound ST2S - page 21

    Fr ont Panel Operation T urning the unit on T o turn the unit on, push the On/Off button up on the front panel. Pushing the On/Off button down turns the tuner off. Selecting the desired tuner From the fr ont panel, use to toggle between SIR- IUS and AM/FM. A backlight shows behind the select- ed label SIRIUS (green) or AM/FM (amber) to indicate the ...

  • Russound ST2S - page 22

    22 ST2S OPERA TION ST2-RC REMOTE CONTROL ST2-RC Remote Contr ol Operation The ST2-RC remote contr ol is the only means of remote operation of the ST2S in a non--RNET system. The ST2S front panel displays information for the tuner that is receiving commands fr om the ST2-RC. However , the ST2-RC commands do not change which tuner is playing; that is ...

  • Russound ST2S - page 23

    23 ST2S OPERA TION ST2-KP KEYP AD CONTROLS ST2-KP Keypad Operation T urning the keypad on/of f T o activate the ST2-KP , press . Press to power down the keypad display . The keypad remains powered until the ST2S T uner is turned off. Selecting the desired tuner T o select a different tuner , press and hold . (If the keypad has been hardwar e jumper ...

  • Russound ST2S - page 24

    24 ST2S OPERA TION UNO-S2 KEYP AD CONTROLS WITH CAV6.6 CA V6.6-UNO-S2 Keypad Operation NOTE: T o control the ST2 T uner through the UNO-S2 keypad, the tuner must be configured as a source using the CA V6.6 programming steps. T urning the unit on The tuner is power managed by the CAV6.6 or other RNET -enabled controller . If the tuner is in standby ...

  • Russound ST2S - page 25

    25 ST2S OPERA TION UNO-S2 KEYP AD CONTROLS WITH CAV6.6 ESPN Radio TUNER SELECTION - Select sour ce number assigned to TUNER 1 (SIRIUS) or TUNER 2 (AM/FM) TUNE UP/DOWN - Used for manual station or chan- nel selection SELECT - (AM/FM) Selects AM or FM band (SIRIUS) Operating mode toggle SEEK - (press) (AM/FM) Seeks next higher tuned station (SIRIUS) ...

  • Russound ST2S - page 26

    UNO-LRC1 Remote Contr ol Operation T urning the unit on The tuner is power managed by the CAV6.6 or other RNET -enabled controller . If the tuner is in standby mode, any button press of the UNO-LRC1 will bring the tuner out of standby mode when used with the UNO keypad. Selecting the desired tuner T o select a tuner , push and choose the source num ...

  • Russound ST2S - page 27

    27 ST2S OPERA TION UNO-LRC1 REMOTE CONTROL WITH CA V6.6 POWER - Power managed by CAV6.6 NUMERIC INPUT - Number buttons for direct input of frequency , channel, preset, bank TUNE UP/DOWN - Incrementally scr olls through channels or tuned stations EXIT - Exit SIRIUS operating mode TUNE UP/DOWN - Incrementally scr olls through channels or tuned statio ...

  • Russound ST2S - page 28

    28 ST2S T uner Setup Menus Note: The Setup Menu procedur es must be per formed fr om the ST2S T uner front panel. The ST2S T uner Setup Menus provide setup and naming pr ocedures for the ST2S main chassis, the SIRIUS tuner module and the AM/FM tuner module. These procedur es include source number assign- ments, assigning a custom name to a memory p ...

  • Russound ST2S - page 29

    29 ST2S TUNER PROGRAMMING ST2 TUNER SETUP MENU Press and Hold Select button ST2 Chassis Setup P rocedures This Procedure returns the ST2 Tuner to its Factory settings SOURCE NUM Procedure F ACTORY INIT Procedure UPDA TE FIRMW Procedure SYSTEM INFO Procedure HOLD MODE After update cycle Power Start Update Cycle Power TUNER # SOURCE NUM TUNER SETUP M ...

  • Russound ST2S - page 30

    System Info (Chassis) The System Info menu shows the ST2 T uner’s manufacturing build properties. 1. Enter the Setup Menu by pressing and holding the SELECT button. 2. TUNER SETUP appears. Press MEM Up/Down until SYSTEM INFO appears on the tuner . 3. Press MODE/BAND. 4. Press MODE/BAND at “Build Time” to view . 5. Press MEM Up/Down to advance ...

  • Russound ST2S - page 31

    31 ST2S TUNER PROGRAMMING ST2 TUNER SETUP MENU Press Select button to select SiriusTuner BANK # MEMORY # MEMORY NAME SA VE CHANGES? Sirius Setup Menu Memory Name Procedur e Selects character Selects character position Repeat for each character in name MEM NAME Procedure BANK NAME Procedure Sirius Setup Menu F ACTORY INIT Procedure CONTROLLR ID Proc ...

  • Russound ST2S - page 32

    32 ST2S TUNER PROGRAMMING ST2 TUNER SETUP MENU Press Select button to select Sirius Tuner BANK # BANK NAME SA VE CHANGES? Sirius Setup Menu Bank Name Proc edure Selects character Selects character position Repeat for each character in name MEM NAME Procedure BANK NAME Procedure Sirius Setup Menu FA CTO RY INIT Procedure CONTROLLR ID Procedure SYSTE ...

  • Russound ST2S - page 33

    ST2S TUNER PROGRAMMING ST2 TUNER SETUP MENU Press Select button to select Sirius Tuner Sirius Setup Menu Con troller , Diagnostics, Factory Initialization and Sy stem Info Proc edures MEM NAME Procedure BANK NAME Procedure Sirius Setup Menu FACT ORY INIT Procedure CONTROLLR ID Procedure SYSTEM INFO Procedure DIAGNOSTICS Procedure This Procedure ret ...

  • Russound ST2S - page 34

    ST2S TUNER PROGRAMMING ST2 TUNER SETUP MENU T uner Setup Menu for AM/FM It is important to select the desired tuner (T uner 2 for AM/FM) using the SELECT button BEFORE accessing the T uner Setup Menus. Memory Name (AM/FM) A memory preset must be created and saved before it can be named (see page 21). Once it is saved, the preset’ s T uner #, Bank ...

  • Russound ST2S - page 35

    AM/FM Setup Menu MEM NAME Procedure AM/FM Setup Menu TUNER SETUP Menu SOURCE NUM Procedure Chassis Setup Menu FACT ORY INIT Procedure UPDA TE FIRMW Procedure SYSTEM INFO Procedure REGION Procedure BANK # BANK NAME SA VE CHANGES? Selects character Selects character position Repeat for each character in name BANK # MEMORY # MEMORY NAME Selects charac ...

  • Russound ST2S - page 36

    36 NOTE: The CAV6.6 (Rev . 3) must have firmware version 2.01.16 or higher , CAV6.6 (Rev . 4) must have firmware version 3.01.10 or higher ,and UNO-S2 firmwar e must be version 3.01.01 or higher to control the ST2S T uner . Use the System Info Menu of the CAV6.6 to check the firmwar e version. If the firmware is not the pr oper revision as noted he ...

  • Russound ST2S - page 37

    37 ST2S Smart T uner Dimensions: 17"W x 8"D x 1.8"H (43 x 20.3 x 4.4 cm) Weight: 7 lbs. (3.2kg) Power Supply: 12VDC 1.25A Frequency Range: AM 530 - 1710 kHz FM 87.7 - 107.9 MHz FM Antenna Impedance: 75 ohm unbalanced Impedance: 300 ohm balanced AM Sensitivity @ S/N: 20dB 55 dBu Image Rejection: 33dB S/N Ratio: 45 dB FM Sensitivity @ ...

  • Russound ST2S - page 38

    38 WARRANTY & REP AIR The Russound ST2S is fully guaranteed against all defects in materials and workmanship for two (2) years from the date of pur chase. During this period, Russound will replace any defective parts and correct any defect in workmanship without char ge for either par ts or labor . For this warranty to apply , the unit must be ...

  • Russound ST2S - page 39

    39 NOTES ...

  • Russound ST2S - page 40

    Russound 5 Forbes Road, Newmarket, NH 03857 tel 603.659.5170 • fax 603.659.5388 e-mail: tech@russound.com www .russound.com © 2005 Russound ® All rights reserved. All trademarks ar e property of their respective owners. © 2005 SIRIUS Satellite Radio Inc. “SIRIUS” and the SIRIUS dog logo are r egistered trademarks of SIRIUS Satellite Radio ...

Fabricant Russound Catégorie Stereo System

Les documents que nous recevons du fabricant de l'appareilRussound ST2S peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Russound
- manuels d’utilisations ST2S
- fiches produit Russound
- dépliants
- ou étiquettes-énergie Russound ST2S
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Russound ST2S.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Russound ST2S, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Russound ST2S. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Russound ST2S.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Russound ST2S, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Russound ST2S par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Russound ST2S.

Le manuel d’utilisation complet Russound, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Russound ST2S - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Russound ST2S, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lRussound ST2S qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Russound ST2S - qui devraient nous aider dans les premières étapes lors de l'utilisation Russound ST2S
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Russound ST2S
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Russound ST2S dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Russound ST2S?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Russound ST2S, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Russound ST2S il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)