Français dropdown-ico

Manuel d’utilisation Heatiator HEIR50T

79 pages 4.88 mb
Télécharger

Aller à la page of 79

Summary
  • Heatiator HEIR50T - page 1

    1 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 • DO NOT store or use gasoline or other fl am- mable vapors and liquids in the vicinity of this or any other appliance. • What to do if you smell gas - DO NOT try to light any appliance. - DO NOT touch any electrical switch. DO NOT use any phone in your building. - Immediate ...

  • Heatiator HEIR50T - page 2

    2 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Listing Label Information/Location Model Name: ___________________________________________ Date purchased/installed: __________________ Serial Number: __________________________________________ Location on fi replace: _____________________ Dealership purchased from: ____________ ...

  • Heatiator HEIR50T - page 3

    3 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury . • W ARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury . • CAUTION! Indicates a hazardous situation ...

  • Heatiator HEIR50T - page 4

    4 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12  = Contains updated information. 14 Appliance Setup A. Remove Fixed Glass Assembly . . . . . . . . . . . . . . . . . . . . 53 B. Remove the Shipping Materials . . . . . . . . . . . . . . . . . . . . 53 C. Clean the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Heatiator HEIR50T - page 5

    5 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 B. Limited Lifetime W arranty 4021-645C 12-29-10 Page 1 of 2 Hearth & Home T echnologies Inc. LIMITED LIFETIME W ARRANTY Hearth & Home T echnologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, pellet, coal and electr ...

  • Heatiator HEIR50T - page 6

    6 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 4021-645C 12-29-10 Page 2 of 2 W ARRANTY CONDITIONS:  7KLVZDUUDQWRQOFRYHUV++7DSSOLDQFHVWKDWDUHSXUFKDVHGW KURXJKDQ++7 DXWKRUL]HGGHDOHURUGLVWULEXWRU  $ OLVWRI ++7DXWKRUL]HGGHDOHUVLVDYDLODEOHRQWKH? ...

  • Heatiator HEIR50T - page 7

    7 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 C. BTU Speci fi cations This product is listed to ANSI standards for “V ented Gas Appliance Heaters” and applicable sections of “Gas Burn- ing Heating Appliances for Manufactured Homes and Recreational V ehicles”, and “Gas Fired Appliances for Use at High Altitudes”. ...

  • Heatiator HEIR50T - page 8

    8 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 H. Requirements for the Commonwealth of Massachusetts For all side wall horizontally vented gas fueled equipment installed in every dwelling, building or structure used in whole or in part for residential purposes, including those owned or operated by the Commonwealth and where t ...

  • Heatiator HEIR50T - page 9

    9 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Figure 2.1 General Operating Parts B. Y our Fireplace W ARNING! DO NOT operate fi replace before read- ing and understanding operating instructions. Failure to operate fi replace according to operating instructions could cause fi re or injury . DECORA TIVE DOORS (NOT SHOWN) SE ...

  • Heatiator HEIR50T - page 10

    10 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 C. Clear Space W ARNING! DO NOT place combustible objects in front of the fi replace or block louvers. High temperatures may start a fi re. See Figure 2.2. Avoid placing candles and other heat-sensitive objects on mantel or hearth. Heat may damage these objects. Figure 2.2 Cle ...

  • Heatiator HEIR50T - page 11

    11 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 J. Before Lighting Fireplace Before operating this fi replace for the fi rst time, have a quali fi ed service technician : • V erify all shipping materials have been removed from inside and/or underneath the fi rebox. • Review proper placement of logs, ember material and ...

  • Heatiator HEIR50T - page 12

    12 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 K. Lighting Instructions (IPI) 1. This appliance is equipped with an ignition device which automatically lights the burner. DO NOT try to light the burner by hand. 2. Wait fi ve (5) minutes to clear out any gas. Then smell for gas, including near the fl oor. If you smell gas, ...

  • Heatiator HEIR50T - page 13

    13 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 L. After Fireplace is Lit Initial Break-in Procedure • The fireplace should be run three to four hours continuously on high. • T urn the fi replace off and allow it to completely cool. • Remove fi xed glass assembly . See Section 14.H. • Clean fi xed glass assembly . ...

  • Heatiator HEIR50T - page 14

    14 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 3 3 Maintenance and Ser vice A. Maintenance T asks-Homeowner The following tasks may be performed annually by the homeowner . If you are uncomfortable performing any of the listed tasks, please call your dealer for a service ap- pointment. More frequent cleaning may be required ...

  • Heatiator HEIR50T - page 15

    15 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 B. Maintenance T asks-Quali fi ed Service T echnician The following tasks must be performed by a quali fi ed ser- vice technician. Glass Cleaning (Exterior and Interior of Installed Glass) Frequency: Seasonally By: Quali fi ed Service T echnician T ools Needed : Protective gl ...

  • Heatiator HEIR50T - page 16

    16 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Figure 3.1 IPI Pilot Flame Patterns Burner Ignition and Operation Frequency: Annually By: Quali fi ed Service T echnician T ools needed: Protective gloves, vacuum cleaner , whisk broom, fl ashlight, voltmeter , indexed drill bit set, and a manometer . • V erify burner is pro ...

  • Heatiator HEIR50T - page 17

    17 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 A. T ypical Appliance System NOTICE: Illustrations and photos re fl ect typical installations and are for design purposes only . Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual. Figure 4.1 T ypical System HORIZONT AL TERMINA TION C ...

  • Heatiator HEIR50T - page 18

    18 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 B. Design and Installation Considerations Heatilator direct vent gas appliances are designed to op- erate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside. No additional outside air source is required. Installation MUST ...

  • Heatiator HEIR50T - page 19

    19 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 5 5 F raming and Clearances A. Selecting Appliance Location When selecting a location for the appliance it is important to consider the required clearances to walls (see Figure 5.1). W ARNING! Risk of Fire or Burns! Provide adequate clearance around air openings and for service ...

  • Heatiator HEIR50T - page 20

    20 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 C B D A B. Constructing the Appliance Chase A chase is a vertical box-like structure built to enclose the gas appliance and/or its vent system. In cooler climates the vent should be enclosed inside the chase. NOTICE: T reatment of ceiling fi restops and wall shield fi restops ...

  • Heatiator HEIR50T - page 21

    21 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 D. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances as speci fi ed. Framing or fi nishing material closer than the minimums listed must be constructed entirely of non- combustible materials (i.e., steel studs, concrete board, etc). Comb ...

  • Heatiator HEIR50T - page 22

    22 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 6 12 10 18 21 FIREPLACE OPENING 1-1/4 IN. SEE SECTION 13.D 1/2 IN. NON-COMBUSTIBLE MA TERIAL HEIR36 HEIR42 MAX. MIN. Note: All measurements in inches. Note: Measurement is taken from top of the opening, NOT the top of the fi replace. Non-Combustible Mantel Projections 1 9 3 6 1 ...

  • Heatiator HEIR50T - page 23

    23 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Figure 5.10 Non-Combustible Hearth Extension Dimensions MODEL A B in. mm in. mm HEIR36 12 305 57-1/4 1454 HEIR42 12 305 63-5/16 1608 HEIR50 12 305 71-5/16 181 1 A B NON-COMBUSTIBLE NON-COMBUSTIBLE BOARD HEARTH CLEARANCE BRACKET WOOD OR OTHER COMBUSTIBLE FLOOR OR PLA TFORM 4 IN. ...

  • Heatiator HEIR50T - page 24

    24 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 A. V ent T ermination Minimum Clearances Roof Pitch H (Min.) Ft. Flat to 6/12...........................................................1.0* Over 6/12 to 7/12 .................................................1.25* Over 7/12 to 8/12 ............................................... ...

  • Heatiator HEIR50T - page 25

    25 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 O N P R Q C J B D B F B A E V V V V V V M H or i V G X V H A V V H Electrical Service V K V K V L C V Figure 6.3 Minimum Clearances for T ermination X = AIR SUPPL Y INLET A = 12 inches................. clearances above grade, veranda, porch, deck or balcony B = 12 inches........ ...

  • Heatiator HEIR50T - page 26

    26 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 A. Approved Pipe This appliance is approved for use with Hearth & Home T echnologies DVP venting systems. Refer to Section 16.B for vent component information. DO NOT mix pipe, fi ttings or joining methods from differ- ent manufacturers. The pipe is tested to be run inside ...

  • Heatiator HEIR50T - page 27

    27 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 H 1 V 1 1. T op V ent - Horizontal T ermination Figure 7.3 One Elbow Fire Risk. Explosion Risk. Do NOT pack insulation or other combustibles between ceiling fi restops. • AL W A YS maintain speci fi ed clearances around venting and fi restop systems. • Install wall shield ...

  • Heatiator HEIR50T - page 28

    28 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 H 2 H 1 INST ALLED HORIZONT ALL Y V 1 Figure 7.4 T wo Elbows Note: Flue restrictor is permit- ted ONL Y on 30 ft. minimum vertical runs with no elbows. W ARNING! Risk of Fire! • HEIR36(NG/LP), HEIR42(NG/LP) and HEIR50(NG/LP) models require a minimum of 36 inches of vertical ve ...

  • Heatiator HEIR50T - page 29

    29 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 1. T op V ent - Horizontal T ermination - (continued) Figure 7.5 Three Elbows HEIR36 (NG/LP), HEIR42 (NG/LP), HEIR50 (NG/LP) V 1 H 1 V 2 H 2 2 ft 610 mm 7 in 178 mm * H 2 Max = 2 X V 2 3 ft 914 mm 2 ft 610 mm * H 2 Max = 2 X V 2 4 ft 1.2 m 4 ft 1.2 m * H 2 Max = 2 X V 2 5 ft 1.5 ...

  • Heatiator HEIR50T - page 30

    30 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 2. T op V ent - V ertical T ermination No Elbow Figure 7.6 V 1 = 50 ft. Max. (15.2 m) V 1 = 2 ft. Min. (610 mm) NOTE: Flue Restrictor ships in manual bag assembly . Note: Flue restrictor is permit- ted ONL Y on 30 ft. minimum vertical runs with no elbows. V 1 FLUE RESTRICTOR Fig ...

  • Heatiator HEIR50T - page 31

    31 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Figure 7.8 HEIR36 (NG/LP), HEIR42 (NG/LP), HEIR50 (NG/LP) V 1 H 1 V 2 2 ft 610 mm 1 ft 305 mm * 3 ft 914 mm 3 ft 914 mm * 4 ft 1.2 m 4 ft 1.2 m * 5 ft 1.5 m 9 ft 2.7 m * 6 ft 1.8 m 12 ft 3.7 m * V 1 + V 2 + H 1 = 50 ft (15.2 m) Max. *No speci fi c restrictions on this value EXC ...

  • Heatiator HEIR50T - page 32

    32 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Three Elbows HEIR36 (NG/LP), HEIR42 (NG/LP), HEIR50 (NG/LP) V 1 H 1 H 2 V 2 H t Max. 2 ft 610 mm * * ** 7 in 178 mm 3 ft 914 mm * * ** 2 ft 610 mm 4 ft 1.2 m * * ** 4 ft 1.2 m 5 ft 1.5 m * * ** 8 ft 2.4 m 6 ft 1.8 m * * ** 12 ft 3.7 m 7 ft 2.1 m * * ** 14 ft 4.3 m 10 ft 3.0 m * ...

  • Heatiator HEIR50T - page 33

    33 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 F . PVK-80 and PVI-SLP Information This section provides speci fi c detail for installation of HEIR36, HEIR42, and HEIR50 models with approved power vent kits. Follow instructions included with the PVK-80 or PVI-SLP power vent kits. See T able 7.1 below for approved Power V ent ...

  • Heatiator HEIR50T - page 34

    34 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 A* B 10 in. 12 in. DO NOT P ACK WITH INSULATION OR OTHER MATERIAL A. Pipe Clearances to Combustibles W ARNING! Risk of Fire! Maintain air space clearance to vent. DO NOT pack insulation or other combustibles: • Between ceiling fi restops • Between wall shield fi restops ? ...

  • Heatiator HEIR50T - page 35

    35 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 C. Install the Ceiling Firestop A ceiling fi restop MUST be used between fl oors and attics. • DVP pipe only - Frame an opening 10 in. by 10 in. (254 mm by 254 mm) whenever the vent penetrates a ceiling/ fl oor (see Figure 8.3). • Frame the area with the same sized lumber ...

  • Heatiator HEIR50T - page 36

    36 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 D. Install Attic Insulation Shield W ARNING! Fire Risk. DO NOT allow loose materials or insulation to touch vent. Hearth & Home T echnologies Inc. requires the use of an attic shield. The National Fuel Gas Code ANSI Z223.1 and NFPA 54 requires an attic shield constructed of ...

  • Heatiator HEIR50T - page 37

    37 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 9 9 Appliance Preparation A. V ent Preparation Figure 9.2 Seal Cap and Gasket Location SEAL CAP SEAL CAP GASKET GASKET CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp. NOTICE: This ap ...

  • Heatiator HEIR50T - page 38

    38 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Figure 9.3 Side Nailing T ab in Shipping Position Figure 9.4 Nailing T ab Bent Out for Installation HEA T SHIELD NAILING T AB IN SHIPPING POSITION Figure 9.5. Heat Shields and Nailing T abs in Installation Position B. Securing and Leveling the Appliance W ARNING! Risk of Fire! P ...

  • Heatiator HEIR50T - page 39

    39 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Figure 9.6 Shipping Location of Non-Combustible Board C. Installing Non-combustible Facing Material W ARNING! Risk of Fire! • Follow these instructions exactly . • Facing materials must be installed properly to prevent fi re. • No materials may be substituted without auth ...

  • Heatiator HEIR50T - page 40

    40 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 1 0 10 Inst alling V ent Pipe (D VP Pipe ) A. Assemble V ent Sections Attach V ent to the Firebox Assembly Note: The end of the pipe sec tions wi t h the lanced tabs w ill face toward the appliance. Attach the fi rst pipe section to the starting collar: • Lanced pipe end of t ...

  • Heatiator HEIR50T - page 41

    41 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 120º Figure 10.5 Securing V ertical Pipe Sections 120º Figure 10.6 Securing Horizontal Pipe Sections C. Disassemble V ent Sections • Rotate either section (see Figure 10.7) so the seams on both pipe sections are aligned as shown in Figure 10.8. • Pull carefully to separate ...

  • Heatiator HEIR50T - page 42

    42 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 D. Install Metal Roof Flashing • See minimum vent heights for various pitched roofs (Figure 10.9) to determine the length of pipe to extend through the roof. • Slide the roof fl ashing over the pipe sections extending through the roof as shown in Figure 10.10. Roof Pitch H ...

  • Heatiator HEIR50T - page 43

    43 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 SCREWS CAULK STORM COLLAR (1 of 3) Figure 10.13 Figure 10.13 TERMINA TION CAP F . Install V ertical T ermination Cap • Attach the vertical termination cap by sliding the inner collar of the cap into the inner fl ue of the pipe section while placing the outer collar of the cap ...

  • Heatiator HEIR50T - page 44

    44 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 A. Fuel Conversion • Make sure the appliance is compatible with available gas types. • Conversions must be made by a qualified service technician using Hearth & Home T echnologies speci fi ed and approved parts. B. Gas Pressure • Optimum appliance performance requires ...

  • Heatiator HEIR50T - page 45

    45 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 1 2 12 Electr ical Information Figure 12.1 IPI Wiring Diagram TO JUNCTION BOX (1 10V) MODULE I S FLAME SENSE IGNITER GROUND ORANGE (PILOT) GREEN (MAIN) BROWN BLACK RED BA TTERY P ACK 6V DC FLAME MODULA TION ORANG E WHITE TO CUSTOM ER-SUPPLIED W ALL SWITCH JUMPE R WIRE BLAC K RED ...

  • Heatiator HEIR50T - page 46

    46 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Figure 12.3 Junction Box Detail NOTICE: DO NOT wire 1 10 V AC to wall switch. GRN wire inside box Copper ground attached to GRN screw with GRN wire WHT WHT BLK BLK 14/2WG Romex Connector D. Electrical Service and Repair W ARNING! Risk of Shock! Label all wires prior to dis- conn ...

  • Heatiator HEIR50T - page 47

    47 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 1 3 13 Fi nishing A. Finishing T emplates T wo side fi nishing templates and one top fi nishing template are supplied with the appliance. They are fastened to the top surround. INSIDE FIT Method: The fi nishing template pieces are required for installations that require more ...

  • Heatiator HEIR50T - page 48

    48 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Figure 13.6. Splatter Guard Installation B. Splatter Guard The splatter guard is a piece of corrugated material used to protect the appliance during the installation process before fi nishing work on the whole hearth is complete. Splatter guards may be factory installed or acco ...

  • Heatiator HEIR50T - page 49

    49 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 C. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances as speci fi ed. Framing closer than the minimums listed must be constructed entirely of non-combustible materials (i.e., steel studs, concrete board, etc.). FIREPLACE OPENING COMBUSTIBL ...

  • Heatiator HEIR50T - page 50

    50 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Non-Combustible Mantel Projections Combustible Mantel Projections 1 9 3 6 12 9 12 15 18 21 FIREPLACE OPENING 1/2 IN. NON-COMBUSTIBLE MA TERIAL HEIR36 HEIR42 MAX. MIN. Note: All measurements in inches. Note: Measurement is taken from top of the opening, NOT the top of the fi rep ...

  • Heatiator HEIR50T - page 51

    51 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 D. Facing Material • Metal front faces may be covered with non-combustible materials only . • Facing and/or fi nishing materials must not interfere with air fl ow through louvers, operation of louvers or doors, or access for service. • Facing and/or fi nishing materials ...

  • Heatiator HEIR50T - page 52

    52 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 FINISHING MA TERIAL FINISHING MA TERIAL IF FINISHING MA TERIAL IS THICKER THAN 1-1/2 IN. DOORS WILL ONL Y OPEN AS F AR AS PICTURED 1-1/2 IN. MEASURE FROM FIREPLACE OPENING Figure 13.16 Minimum Side Clearance for Operable Doors A B COMBUSTIBLE MA TERIAL C (ARCH) DIMENSION INOPERA ...

  • Heatiator HEIR50T - page 53

    53 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 A. Remove Fixed Glass Assembly See Section 14.H. B. Remove the Shipping Materials Remove shipping materials from inside or underneath the fi rebox. C. Clean the Appliance Clean/vacuum any sawdust that may have accumulated inside the fi rebox or underneath in the control cavity ...

  • Heatiator HEIR50T - page 54

    54 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 G. Install the Log Assembly Log Set Assembly: LOGS-HEIR36 LOGS-HEIR42 Models: HEIR36H, HEIR36S HEIR42H, HEIR42S Figure 4 CAUTION: Logs are fragile, handle with care. Log #1 (2284-701) : Locate log placement slot on the bottom of log #1. See Figure 2. Mate slot on the bottom of L ...

  • Heatiator HEIR50T - page 55

    55 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Figure 8 Log #4 (2284-704) : See Figure 8. Place Log #4 in appliance with burned edge facing center . The bottom of Log #4 will rest on bottom refractory . Slide bottom of Log #4 forward until it contacts back side of Log #2. Log should also be positioned as close to the burner ...

  • Heatiator HEIR50T - page 56

    56 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 2284-935C Log #5 (2284-705) : Locate fl at areas on Log #1 and Log #3 that will be used to position Log #5. See Figure 1 1. Place Log #5 into appliance as shown in Figure 12. Log #5 should contact base refractory and rest on the fl at areas as shown in Figure 1 1. Burned porti ...

  • Heatiator HEIR50T - page 57

    57 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Log Set Assembly: LOGS-HEIR50 Models: HEIR50T , HEIR50H LOG PLACEMENT INSTRUCTIONS CAUTION: Logs are fragile, handle with care. Log #1 (2285-701) : Locate log placement notch on the bottom of log #1. See Figure 2. Mate notch on the bottom of Log #1 with outside grate tines. Slid ...

  • Heatiator HEIR50T - page 58

    58 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Log #5 (2285-705) : Locate notched area on Log #1 that will be used to position Log #5. See Figure 2. Place Log #5 into appliance with “burned” edge toward center of appliance. See Figure 1 1. Log will sit on bottom refractory and should be about 1-1/2 inches from right grat ...

  • Heatiator HEIR50T - page 59

    59 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 2285-935 Figure 12. Log Set Installed 1 1 2 2 4 4 3 3 6 6 5 5 Log #6 (2285-706) : Place Log #6 into appliance as shown in Figure 12. Bottom corner of Log #6 should be about 1/2 inch from right hand grate tine. Log will contact right center grate tine. The top of Log #6 should re ...

  • Heatiator HEIR50T - page 60

    60 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Figure 14.4. Glass Clip T ool Location Figure 14.5 Inserting Glass Clip T ool Figure 14.3. Glass Clip T ool H. Fixed Glass Assembly W ARNING! Risk of Asphyxiation! Handle fi xed glass assembly with care. Inspect the gasket to ensure it is undamaged and inspect the glass for cra ...

  • Heatiator HEIR50T - page 61

    61 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 TOP RET AINING RAIL NOTCH TOP RET AINING RAIL NOTCH GLASS FRAME NOTCH GLASS FRAME NOTCH Figure 14.6 Figure 14.8. Replacing Fixed Glass Assembly This fi xed glass assembly is held in place by two side clips, one top retaining rail and lower glass clips. The HEIR36 has three lowe ...

  • Heatiator HEIR50T - page 62

    62 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 I. Air Shutter Setting Air shutter settings should be adjusted by a quali fi ed ser- vice technician at the time of installation. The air shutter is set at the factory for minimum vertical vent run. Adjust air shutter for longer vertical runs. See Figure 14.1 1. Flame Appearanc ...

  • Heatiator HEIR50T - page 63

    63 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 1 5 15 T roubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a quali fi ed service technician in the diagnosis of a problem and ...

  • Heatiator HEIR50T - page 64

    64 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 T roubleshooting (continued) Symptom Possible Cause Corrective Action 4. Pilot lights but contin- ues to spark, and main burner will not ignite. (If the pilot continues to spark after the pilot fl ame has been lit, fl ame recti fi cation has not occurred.) A. A shorted or loo ...

  • Heatiator HEIR50T - page 65

    65 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 1 6 16 Reference Materials Appliance Dimensions T able HEIR36 A. Appliance Dimension Diagram Dimensions are actual appliance dimensions. Use for reference only. For framing dimensions and clearances refer to Section 5. Figure 16.1 Appliance Dimensions (HEIR36) A B D C E I L M N ...

  • Heatiator HEIR50T - page 66

    66 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Appliance Dimensions T able HEIR42 Figure 16.2 Appliance Dimensions (HEIR42 & HEIR50) Appliance Dimensions T able HEIR50 A B D C E I L M N O P R Q GAS ACCESS ELECTRICAL ACCESS J K HEA T -ZONE ® PORT HEA T -ZONE ® PORT H F G Location Inches Millimeters J 24 610 K 23-1/2 597 ...

  • Heatiator HEIR50T - page 67

    67 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 B. V ent Components Diagrams Figure 16.3 DVP vent components 10-1/2 in. (267 mm) 10-7/8 in. (276 mm) 45 ° 7-3/8 in. (187 mm) 11-3/8 in. (289 mm) 1-1/4 in. (32 mm) 9-1/4 in. (235 mm) 13-1/4 in. (337 mm) 1/2 in. TYP DVP90ST (90° Elbow) 10 in. (254 mm) 10 in. (254 mm) 1 in. (25 m ...

  • Heatiator HEIR50T - page 68

    68 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 DVP-TRAP1 DVP-TRAP2 DVP-TRAPK2 DVP-TRAPK1 DVP-TRAP Horizontal T ermination Cap 15-1/8 in. (384 mm) 12 in. (305 mm) 8 in. (203 mm) Max Effective Length Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be used on a wall 4 in. to 7-1 ...

  • Heatiator HEIR50T - page 69

    69 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 13-1/4 in. (337 mm) 24-5/8 in. (625 mm) 27-1/2 in. (699 mm) RF6M Roof Flashing Multi-pak 31 in. (787 mm) 24-5/8 in. (625 mm) 13-1/4 in. (337 mm) RF12M Roof Flashing Multi-pak BEK Trap Ca p Brick Extension 13-3/4 in. (349 mm) 5 in. (127 mm) 13-3/4 in. (349 mm) Cap Shield DRC-RADI ...

  • Heatiator HEIR50T - page 70

    70 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 7-1/4 in. 12 in. 305 mm (184 mm) 5-1/4 in. (133 mm) 12-1/2 in. (318 mm) DVP-TVHW VerticalTermination Cap (Highwind) PVK-80 (Approved for HEIR36, HEIR42, HEIR50) 11-1/2 in. (292 mm) 12-1/2 in. (318 mm) 16 in. (406 mm) 9 in. (229 mm) 2-3/4 in. (70 mm) 12-1/4 in. (311 mm) B. V ent ...

  • Heatiator HEIR50T - page 71

    71 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Service Parts IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot ITEM DESCRIPTION CO ...

  • Heatiator HEIR50T - page 72

    72 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Service Parts HEIR36T , HEIR36H IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot I ...

  • Heatiator HEIR50T - page 73

    73 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Service Parts IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot ITEM DESCRIPTION CO ...

  • Heatiator HEIR50T - page 74

    74 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Service Parts HEIR42T , HEIR42H IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot I ...

  • Heatiator HEIR50T - page 75

    75 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Service Parts IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot ITEM DESCRIPTION CO ...

  • Heatiator HEIR50T - page 76

    76 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Service Parts HEIR50T , HEIR50H IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot I ...

  • Heatiator HEIR50T - page 77

    77 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Service Parts IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot ITEM DESCRIPTION CO ...

  • Heatiator HEIR50T - page 78

    78 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Service Parts Beginning Manufacturing Date: May 2012 Ending Manufacturing Date: Active HEIR36, HEIR42, HEIR50 IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts liste ...

  • Heatiator HEIR50T - page 79

    79 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev . D • 8/12 Heatilator , a brand of Hearth & Home T echnologies Inc. 7571 215 th Street West, Lakeville, MN 55044 www .heatilator .com D. Contact Information Please contact your Heatilator dealer with any questions or concerns. For the location of your nearest Heatilator dealer , please ...

Fabricant Heatiator Catégorie Indoor Fireplace

Les documents que nous recevons du fabricant de l'appareilHeatiator HEIR50T peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Heatiator
- manuels d’utilisations HEIR50T
- fiches produit Heatiator
- dépliants
- ou étiquettes-énergie Heatiator HEIR50T
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Heatiator HEIR50T.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Heatiator HEIR50T, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Heatiator HEIR50T. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Heatiator HEIR50T.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Heatiator HEIR50T, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Heatiator HEIR50T par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Heatiator HEIR50T.

Le manuel d’utilisation complet Heatiator, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Heatiator HEIR50T - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Heatiator HEIR50T, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lHeatiator HEIR50T qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Heatiator HEIR50T - qui devraient nous aider dans les premières étapes lors de l'utilisation Heatiator HEIR50T
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Heatiator HEIR50T
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Heatiator HEIR50T dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Heatiator HEIR50T?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Heatiator HEIR50T, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Heatiator HEIR50T il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)