Français dropdown-ico

Manuel d’utilisation Husqvarna ZTH

60 pages 1.58 mb
Télécharger

Aller à la page of 60

Summary
  • Husqvarna ZTH - page 1

    ZTH Oper a tor´s manual Please read these instructions car efully and make sur e you understand them bef ore using the machine. English ...

  • Husqvarna ZTH - page 2

    ...

  • Husqvarna ZTH - page 3

    English- 1 OPERATOR’S MANUAL Contents Contents ..................................................................1 Introduction ............................................................3 Congratulations ....................................................3 General ................................................................3 Driving and Tr ...

  • Husqvarna ZTH - page 4

    English- 2 ...

  • Husqvarna ZTH - page 5

    English- 3 INTRODUCTION Intr oduction Congratulations Thank you f or purchasing a Husqvarna r ide-on mow er . This machine is built f or the greatest ef fi ciency and rapid mo wing primar ily of large areas. Controls in one place and a h ydrostatic transmission regulated by steering controls also contr ibute to the machine ’ s perf or mance. Thi ...

  • Husqvarna ZTH - page 6

    English- 4 INTRODUCTION Good Service Husqv ar na ’ s products are sold all ov er the world and only in specialized retail trade with complete service. This ensures that you as a customer receiv e only the best suppor t and ser vice. Before the product is deliv ered, the machine has, f or example , been inspected and adjusted by y our retailer , s ...

  • Husqvarna ZTH - page 7

    English- 5 SYMBOLS AND DECALS Symbols and Decals These symbols are f ound on the machine and in the operator ’ s manual. Study them carefully so that you kno w what the y mean. Used in this publication to notify the reader of a risk of personal injury , par ticular ly if the reader should neglect to f ollow instructions giv en in the manual. Used ...

  • Husqvarna ZTH - page 8

    English- 6 SAFETY INSTRUCTIONS Safety Instructions These instructions are for y our saf ety . Read them carefully . General Use • Read all instructions in this operator ’ s manual and on the machine bef ore star ting it. Ensure that you understand them and then abide by them. • Learn how to use the machine and its controls saf ely and learn h ...

  • Husqvarna ZTH - page 9

    English- 7 SAFETY INSTRUCTIONS • Be careful when rounding fi x ed objects, so that the blades do not hit them. Nev er drive o ver f oreign objects. • Only use the machine in da ylight or in other well-lit conditions . K eep the machine a saf e distance from holes or other irregularities in the ground. P a y attention to other possible risks. ? ...

  • Husqvarna ZTH - page 10

    English- 8 SAFETY INSTRUCTIONS Driving on Slopes Driving on slopes is one of the operations where the risk is greatest that the driver will lose control or the machine will tip ov er , which can result in serious injur y or death. All slopes require e xtra caution. If you cannot re v erse up a slope or if you f eel unsure, do not mow the slope . Do ...

  • Husqvarna ZTH - page 11

    English- 9 SAFETY INSTRUCTIONS Children • Serious accidents may occur if y ou f ail to be on guard f or children in the vicinity of the machine. Children are often attracted to the machine and mowing w ork. Nev er assume that children will sta y put where you last sa w them. • K eep children awa y from the mowing area and under close super visi ...

  • Husqvarna ZTH - page 12

    English- 10 SAFETY INSTRUCTIONS • Allow the engine to cool bef ore refueling. Do not smoke . Do not fi ll fuel in the vicinity of sparks or open fl ames. • If leaks arise in the fuel system, the engine must not be star ted until the problem has been resolv ed. • Store the machine and fuel in such a wa y that there is no risk of leaking fuel ...

  • Husqvarna ZTH - page 13

    English- 11 SAFETY INSTRUCTIONS • Ne v er use the machine indoors or in spaces lacking proper v entilation. The e xhaust fumes contain carbon mono xide, an odorless, poisonous, and lethal gas . • Stop and inspect the equipment if you run ov er or into anything. If necessar y , make repairs bef ore star ting. • Ne v er make adjustments with th ...

  • Husqvarna ZTH - page 14

    English- 12 PRESENTATION Presentation This operator ’ s manual describes the Husqv ar na Le v er-Steered Rider . The r ider is fi tted with a Kaw asaki f our-stroke V -T win engine de v eloping 23/25 horse pow er . T ransmission from the engine is made via two belt-driven h ydraulic pumps, which in turn drive a h ydraulic motor for each driv e w ...

  • Husqvarna ZTH - page 15

    English- 13 PRESENTATION Choke Control The choke control is used f or cold star ts in order to provide the engine with a richer fuel mixture. F or cold star ts the control shall be pulled out. Throttle Contr ol The throttle control regulates the engine speed and thereby e ven the rate of rotation of the blades , assuming the control f or engaging t ...

  • Husqvarna ZTH - page 16

    English- 14 PRESENTATION Engaging the Mo wer Dec k In order to engage the mow er deck, pull the button out; the mower dec k is disengaged when the button is depressed. P arking Brake The parking brake is f ound on the left of the machine. Pull the lev er backward to activ ate the brak e and f orward to release it. Seat Locking De vice T o the left ...

  • Husqvarna ZTH - page 17

    English- 15 PRESENTATION Adjusting the Seat The seat can be adjusted lengthwa ys. When making adjustments, the le ver under the front edge of the seat is mov ed to the left (as seen by the driv er in the seat), after which the seat can be mov ed backward or f orward. Steering Controls The machine ’ s speed and direction are continuously v ariable ...

  • Husqvarna ZTH - page 18

    English- 16 PRESENTATION Refueling The machine has two fuel tanks , one on each side just behind the seat. The tanks take 22 liters each. The engine shall be run on a minimum of 87- octane unleaded gasoline (no oil mix). Environmentally adapted alkylate gasoline can be used bene fi cially . See also T echnical Data concerning methanol and ethanol ...

  • Husqvarna ZTH - page 19

    English- 17 PRESENTATION Lifting Lever f or the Mower Deck The lifting le v er is used to place the mow er deck in the tr anspor t position or one of the 17 diff erent cutting height positions. The cutting height is set by placing a peg in the hole f or the desired cutting height and the peg is then lock ed on the inside (hidden in the illustration ...

  • Husqvarna ZTH - page 20

    English- 18 RUNNING Running Before Starting • Read the sections Saf ety Instructions and Presentation bef ore star ting the machine. • P erform the daily maintenance before star ting (see Maintenance Schedule in the Maintenance section). • Check that there is suf fi cient fuel in the fuel tanks. • Adjust the seat to the desired position. T ...

  • Husqvarna ZTH - page 21

    English- 19 RUNNING 4. Mov e the steer ing controls outward to the lock ed (outer) neutral position. 5. Mov e the throttle to the middle position. 6. If the engine is cold, the choke control shall be pulled out to its end position. 8011-526 Steering controls in the outward, lock ed neutral position 8011-509 Set the throttle 8011-508 Set the choke c ...

  • Husqvarna ZTH - page 22

    English- 20 RUNNING 7. Open the fuel tap f or the selected fuel tank. 8. Press in and turn the ignition key to the star t position. 9. When the engine star ts, immediately release the ignition ke y back to the drive position. 8011-506 Open the fuel tap 8011-559 T ur n to the star t position 8011-560 Return to dr ive position IMPORT ANT INFORMA TION ...

  • Husqvarna ZTH - page 23

    English- 21 RUNNING 10. Press the choke control in g radually when the engine has star ted. 11. Set the desired engine speed with the throttle. Allow the engine to run at a moderate speed, ” half throttle ” , f or 3-5 minutes bef ore loading it too heavily . Use full throttle when mowing. Running 1. Mov e the steer ing controls to the neutral p ...

  • Husqvarna ZTH - page 24

    English- 22 RUNNING 3. Select the cutting height by placing the peg in one of the holes. Lock the peg on the inside with the pin. 4. Press in the stop handle, counter hold, and carefully mov e the lifting lev er f orward from the tr anspor t position tow ard the peg. 5. Engage the mow er deck b y pulling out the le v er . 6. The machine ’ s speed ...

  • Husqvarna ZTH - page 25

    English- 23 RUNNING Mowing Tips • Localise and mark rocks and other fi x ed objects in order to av oid collisions. • Begin with a high cutting height and reduce it until the desired mowing result is attained. • The mowing result will be best with a high engine speed (the blades rotate rapidly) and lo w speed (the rider moves slowly). If the ...

  • Husqvarna ZTH - page 26

    English- 24 RUNNING Stopping the Engine F eel free to let the engine idle a minute in order to attain normal operating temperature bef ore stopping it if it has been worked hard. A void idling the engine f or longer periods, as there is a risk of the spar k plugs gaining a coating. 1. Disengage the mow er deck b y depressing the control. 2. Raise t ...

  • Husqvarna ZTH - page 27

    English- 25 MAINTENANCE Maintenance Maintenance Schedule The f ollowing is a list of maintenance procedures that m ust be perf ormed on the machine. F or those points not described in this manual, visit an authorized ser vice workshop. An annual ser vice carried out by an authorized ser vice workshop is recommended in order to maintain your machine ...

  • Husqvarna ZTH - page 28

    English- 26 MAINTENANCE 1) First change after 8 hours. When oper ating with a heavy load or at high ambient temperatures , replace e very 50 hours. 2) In dusty conditions, cleaning and replacement are required more often. 3) For daily use, the machine shall be lubricated twice weekly . 4) Perf or med by authorized service workshop. ● = Described ...

  • Husqvarna ZTH - page 29

    English- 27 MAINTENANCE Ignition System The engine is equipped with an electronic ignition system. Only the spark plugs require maintenance. F or recommended spark plugs, see T echnical Data. 1. Remov e the ignition cable shoe and clean around the spark plug. 2. Remov e the spar k plug with a 13/16" (21 mm) spark plug sock et wrench. 3. Check ...

  • Husqvarna ZTH - page 30

    English- 28 MAINTENANCE 8011-553 Saf ety system Start motor Works Does not work Ignition system ...

  • Husqvarna ZTH - page 31

    English- 29 MAINTENANCE Checking the Engine's Cooling Air Intake Check that the engine ’ s cooling air intake is free from leav es, grass , and dir t. If the cooling air intake is clogged, engine cooling deteriorates, which can lead to engine damage. Checking and Adjusting the Throttle Cable Check that the engine responds to throttle increas ...

  • Husqvarna ZTH - page 32

    English- 30 MAINTENANCE Replacing the Air Filter If the engine seems weak or runs une venly , the air fi lter ma y be clogged. If run with a soiled air fi lter , the spar k plugs can obtain a coating that disrupts operation. F or this reason, it is impor tant to replace the air fi lter regularly (see the heading Maintenance Schedule f or the pro ...

  • Husqvarna ZTH - page 33

    English- 31 MAINTENANCE Replacing the Fuel Filter Replace the line-mounted fuel fi lter e v er y 100 hours (once per season) or more regularly if it is clogged. Replace the fi lter as f ollows: 1. Mov e the hose clamps awa y from the fi lter . Use fl at-nosed pliers. 2. Pull the fi lter loose from the hose ends. 3. Push the new fi lter into t ...

  • Husqvarna ZTH - page 34

    English- 32 MAINTENANCE Checking the P arking Brake Visually check that no damage is f ound on the le v er , links, or s witch belonging to the parking brake . P erform a test drive and chec k that there is a braking eff ect. T o adjust the handbrak e, contact the service workshop . Checking the Blades In order to attain the best mowing eff ect, it ...

  • Husqvarna ZTH - page 35

    English- 33 LUBRICATION Lubrication Lubrication Schedule General Remov e the ignition key to pre vent unintentional mo v ements during lubr ication. When lubricating with an oilcan, it ought to be fi lled with engine oil. When lubricating with grease, unless otherwise stated, grease 503 98 96-01 or another chassis or ball bearing grease off ering ...

  • Husqvarna ZTH - page 36

    English- 34 LUBRICATION Lubricating the Cables If possible , grease both ends of the cab les and move the controls to end stop positions when lubricating. Re fi t the rubber cov ers on the cab les after lubrication. Cables with sheaths will bind if the y are not lubricated regular ly . If a cable binds, it can disrupt operation. If a cable binds , ...

  • Husqvarna ZTH - page 37

    English- 35 LUBRICATION 3. Engine Oil Changing the Engine Oil The engine oil shall be changed f or the fi rst time after 8 hours of operation. Thereafter , it shall be changed e v er y 100 hours. 1. Place the machine on a fl at surf ace. 2. Place a container under the engine where the hose from the oil drainage tap e xits. 3. Remov e the dipstick ...

  • Husqvarna ZTH - page 38

    English- 36 LUBRICATION The oil le v el shall lie between the markings on the dipstick. If the lev el is approaching the ” ADD ” mar k, top up the oil to the ” FULL ” mark on the dipstick. Ne v er fi ll to abov e the ” FULL ” mar k. The oil is topped up through the hole the dipstick sits in. Use engine oil SAE 30 or SAE 10W -30 or , al ...

  • Husqvarna ZTH - page 39

    English- 37 LUBRICATION 5. Front Wheel Mount Lubricate with a grease gun, 1 nipple f or each wheel mount, until the grease is f orced out. Use only good quality molybdenum disulphide grease . Grease from well-kno wn brand names (petrochemical companies, etc.) usually maintains a good quality . 6. Front Wheel Bearings Lubricate with a grease gun, 1 ...

  • Husqvarna ZTH - page 40

    English- 38 LUBRICATION 9. Steering Control Shafts Tip the driver ’ s seat. Lubricate with a grease gun, 1 nipple f or each steering control shaft, until the grease is f orced out. Use only good quality molybdenum disulphide grease . Grease from well-kno wn brand names (petrochemical companies, etc.) usually maintains a good quality . 10. Mower D ...

  • Husqvarna ZTH - page 41

    English- 39 LUBRICATION 12. Belt Adjuster , Hydraulic Pumps Lubricate using a grease gun, 1 nipple, until the grease squeez es out. Use only good quality molybdenum disulphide grease . Grease from well-kno wn brand names (petrochemical companies, etc.) usually maintains a good quality . 13. Changing the Oil Filter 1. Drain the engine oil in accorda ...

  • Husqvarna ZTH - page 42

    English- 40 TROUBLE SHOOTING GUIDE T roub le Shooting Guide Problem Cause The engine will not start. • The control for engaging the mower deck is not depressed. • The steering controls are not locked in the neutral position. • The driver is not sitting in the driver ’ s seat. • The parking brake is not activated. • The battery is dead. ...

  • Husqvarna ZTH - page 43

    English- 41 TROUBLE SHOOTING GUIDE • Wrong fuel type. • Water in the fuel. • Clogged air filter. The engine seems weak. • Clogged air filter. • Defective spark plugs. • Carburetor incorrectly adjusted. The engine overheats. • Clogged air intake or cooling fins. • Engine overloaded. • Poor ventilation around engine. • Defective e ...

  • Husqvarna ZTH - page 44

    English- 42 TROUBLE SHOOTING GUIDE are uneven. • The chain fixture has come loose. • The blades are blunt. • Driving speed too high. • The grass is too long. • Grass collected under the mower deck. The machine vibrates. • The blades are loose. • The blades are incorrectly balanced. • The engine is loose. ...

  • Husqvarna ZTH - page 45

    English- 43 STORAGE Storage Winter Storage At the end of the mowing season, the machine should be readied f or storage (or if it will not be in use f or longer than 30 da ys). Fuel allowed to stand f or long periods of time (30 days or more) can leav e sticky residues that can plug the carburetor and disrupt engine function. Fuel stabilizers are an ...

  • Husqvarna ZTH - page 46

    English- 44 TECHNICAL DATA T echnical Data Meas., W eights, Etc. ZTH5223 ZTH6125 Length 2,057 mm (81 in.) 2,057 mm (81 in.) Width (low ered discharge deck) 1,600 mm (63 in.) 1,829 mm (72 in.) Width (raised discharge dec k) 1,346 mm (53 in.) 1,575 mm (62 in.) Height 1,073 mm (42.25 in.) 1,073 mm (42.25 in.) W eight 464.5 kg (1,024 lbs) 464.5 kg (1,0 ...

  • Husqvarna ZTH - page 47

    English -45 TECHNICAL DATA Noise Emissions and Cutting Width Measured noise le v el 104 dB(A) 104 dB(A) Guaranteed noise le vel 105 dB(A) 105 dB(A) Cutting width 1,321 mm (52 in.) 1,549 mm (61 in.) Electrical System T ype 12 V , negative earth 12 V , negative earth Batter y 12 V , maintenance-free 12 V , maintenance-free Primar y fuse Flat pin 20 A ...

  • Husqvarna ZTH - page 48

    English- 46 SERVICE JOURNAL Service Journal Action Delivery Service 1. Charge the battery . 2. Mount the rear wheels . 3. Adjust the tire pressure of all wheels to 1 bar (15 PSI). 4. Mount the steering controls in the nor mal position. 5. Connect the le ver to the seat stop . 6. Connect the contact bo x to the cable f or the seat ’ s saf ety s wi ...

  • Husqvarna ZTH - page 49

    English- 47 SERVICE JOURNAL Action 20. Inf or m the customer about: The need and adv antages of f ollowing the service schedule. The need and adv antages of leaving the machine f or ser vice e v er y 300 hours. The eff ects of ser vice and maintaining a ser vice jour nal on the machine ’ s resale value . Application areas f or BioClip . 21. Fill ...

  • Husqvarna ZTH - page 50

    English- 48 SERVICE JOURNAL Action Date, mtr reading, stamp, sign 25-Hour Service 1. Check the fuel pump ’ s air fi lter . 2. Check the h ydraulic system ’ s oil lev el. 3. Check the tire pressures. 4. Lubr icate the belt adjuster , mower dec k. 5. Lubr icate the belt adjuster , hydraulic pumps . 6. Check/clean the engine ’ s cooling air int ...

  • Husqvarna ZTH - page 51

    English- 49 SERVICE JOURNAL Action Date, mtr reading, stamp, sign 50-Hour Service 1. P erform the 25-hour ser vice. 2. Clean/replace the air cleaner ’ s fi lter car tr idge (paper fi lter) (shor ter inter vals f or dusty operating conditions). 3. Lubricate the front wheel bear ings. 4. Lubricate the steer ing control shafts. 5. Lubricate the mo ...

  • Husqvarna ZTH - page 52

    English- 50 SERVICE JOURNAL Action Date, mtr reading, stamp, sign 100-Hour Service 1. P erf or m the 25-hour ser vice. 2. P erf or m the 50-hour ser vice. 3. Change engine oil. 4. Chec k whether the h ydraulic oil needs changing (e v er y 300 hours). 5. Chec k whether the engine oil fi lter needs changing (e v er y 200 hours). 6. Clean/replace the ...

  • Husqvarna ZTH - page 53

    English- 51 SERVICE JOURNAL Action Date, mtr reading, stamp, sign 300-Hour Service 1. Inspect the machine . Come to agreement with the customer as to which additional work is to be carried out. 2. P erform the 25-hour ser vice. 3. P erform the 50-hour ser vice. 4. P erform the 100-hour ser vice. 5. Change the oil and fi lter in the h ydraulic syst ...

  • Husqvarna ZTH - page 54

    English- 52 SERVICE JOURNAL Action Date, mtr reading, stamp, sign At Least Once Each Y ear 1. Clean the engine ’ s cooling air intake (25 hours). 2. Replace the air cleaner ’ s pre- fi lter (Oil-foam) (300 hours). 3. Replace the air fi lter ’ s paper car tr idge (200 hours). 4. Change the engine oil (100 hours). 5. Replace the engine oil ? ...

  • Husqvarna ZTH - page 55

    English- 53 SERVICE JOURNAL Action Date, mtr reading, stamp, sign ...

  • Husqvarna ZTH - page 56

    English- 54 SERVICE JOURNAL Action Date, mtr reading, stamp, sign ...

  • Husqvarna ZTH - page 57

    English- 55 SERVICE JOURNAL Action Date, mtr reading, stamp, sign ...

  • Husqvarna ZTH - page 58

    ´+H(h¶6'¨ ...

  • Husqvarna ZTH - page 59

    ...

  • Husqvarna ZTH - page 60

    ´+H(h¶6'¨ 2002W14 114 00 87-26 ...

Fabricant Husqvarna Catégorie Lawn Mower

Les documents que nous recevons du fabricant de l'appareilHusqvarna ZTH peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Husqvarna
- manuels d’utilisations ZTH
- fiches produit Husqvarna
- dépliants
- ou étiquettes-énergie Husqvarna ZTH
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Husqvarna ZTH.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Husqvarna ZTH, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Husqvarna ZTH. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Husqvarna ZTH.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Husqvarna ZTH, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Husqvarna ZTH par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Husqvarna ZTH.

Le manuel d’utilisation complet Husqvarna, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Husqvarna ZTH - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Husqvarna ZTH, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lHusqvarna ZTH qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Husqvarna ZTH - qui devraient nous aider dans les premières étapes lors de l'utilisation Husqvarna ZTH
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Husqvarna ZTH
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Husqvarna ZTH dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Husqvarna ZTH?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Husqvarna ZTH, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Husqvarna ZTH il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)