Manuel d’utilisation Audiovox PRO 9171FT

12 pages 0.13 mb
Télécharger

Aller à la page of 12

Summary
  • Audiovox PRO 9171FT - page 1

    3 Channel Remote Car Starter Installation Instructions For installation in vehicles with 12 volt negative ground circuits, gasoline engines, with automatic transmission only! Model PRO 9171FT Installation Manual KIT CONTENTS (1 ) Remote Start Control Module (2 ) 3 Button RF Keychain Transmitters (2 ) Wiring Harnesses (1 ) Parts Bag Containing (2) F ...

  • Audiovox PRO 9171FT - page 2

    The PRO-9171FT is for Automatic Transmission vehicles only! Although it is a sophisticated system, with multiple built-in safety features, it must not be installed into vehicles with manual transmissions. Doing this can cause serious personal injury and property damage. IMPORTANT ! DO NOT PLUG THE SIX PIN MAIN POWER HARNESS OR THE 12 PIN INPUT / OU ...

  • Audiovox PRO 9171FT - page 3

    LIGHT GREEN Wire : Ignition 2 Output Connect this wire to the ignition 2 wire from the ignition switch. This wire will show +12 Volts when the ignition key is turned to the “ RUN or ON “ position, and in some cases, the “ START or CRANK “ position. This wire will show 0 Volts when the key is turned to the “ OFF “ and “ ACCESSORY “ p ...

  • Audiovox PRO 9171FT - page 4

    4 This wire provides a 500 mA + 12 Volt transistorized output when the ignition key is turned to the “ON” position, and 0 Volts when the ignition key is “OFF” and when the vehicle is running under the control of the remote starter. This wire should be connected to the ignition input of the alarm system. The Yellow w/ Black wire output will ...

  • Audiovox PRO 9171FT - page 5

    5 DARK GREEN Wire: Tach Sensor Input This wire will continually monitor the tach rate while the engine is running under power supplied by the Remote Starter. This wire will be routed through the fire wall into the engine compartment. It is necessary to use an existing grommet when passing wires through the fire wall to prevent short circuiting. Con ...

  • Audiovox PRO 9171FT - page 6

    To program these selectable features: 1. Start with the programming switch in the OFF position. 2. Turn the ignition key to the ON position. 3. Flip the program switch ON - OFF - ON - OFF - ON - then OFF. 4. Immediately turn the ignition key OFF, then back to ON. 5. Flip the program switch ON - OFF - ON - then OFF. 6. Use button 1 on the transmitte ...

  • Audiovox PRO 9171FT - page 7

    NEUTRAL ST ART SAFETY TEST : The intent of the neutral start switch is to prevent the vehicle from starting while the gear selector is in any position other than Park, or Neutral. When installing a Remote S tart Device, it is imperative that the Y ellow Starter wire be connected to the ignition switch side of the Neutral Start Switch. Consideration ...

  • Audiovox PRO 9171FT - page 8

    KEY IN SENSOR CIRCUITS: If the vehicle you are working on does not have or you cannot locate the ECM reference wire, there are two alternatives available. Although not preferred, the vehicle Key In Sensor may be reconfigured to allow a margin of safety and will prevent the vehicle with a Mechanical Neutral S t art Switch from starting in gear . AUD ...

  • Audiovox PRO 9171FT - page 9

    T o connect to the key in sensor as shown in method 1: A . Locate the control wire that connects the drivers door pin switch to the key in sensor switch. B . Cut this wire and connect the ignition cylinder side to chassis ground. C. Locate the key in sensor switch wire that connects the chime module to the ignition cylinder . D. Cut this wire and c ...

  • Audiovox PRO 9171FT - page 10

    10 NOTE: A second 4002 series diode may be required to maintain t he integrity of the hood open, shut down circuit. If this is the case, it must be installed as shown in the diagram above. The anode (Non Striped) side must be connected to the Gray/Black wire of the Remote Start Unit. The cathode (Striped) side must be connected to the hood pin swit ...

  • Audiovox PRO 9171FT - page 11

    12 PIN CONNECTOR WIRING THE 12 PIN INPUT / OUTPUT HARNESS CONTROL SWITCH TO ALARM'S IGNITION INPUT- (YELLOW WIRE OF AUDIOVOX ALARMS) LIGHT BLUE WHITE WHITE POSITIVE INHIBIT 1 NEGATIVE INHIBIT 2 TACH     SPLICE EXISTING BRAKE SWITCH IGNITION 3 O R SHOCK BY-PASS TO CHASSIS GROUND EXISTING PARKING LAMP WIRE SPLICE  PARKING LAMP BRO ...

  • Audiovox PRO 9171FT - page 12

    © 1998 Audiovox Corporation, Hauppauge, NY 11788 128-5404 ...

Fabricant Audiovox Catégorie Remote Starter

Les documents que nous recevons du fabricant de l'appareilAudiovox PRO 9171FT peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Audiovox
- manuels d’utilisations PRO 9171FT
- fiches produit Audiovox
- dépliants
- ou étiquettes-énergie Audiovox PRO 9171FT
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Audiovox PRO 9171FT.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Audiovox PRO 9171FT, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Audiovox PRO 9171FT. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Audiovox PRO 9171FT.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Audiovox PRO 9171FT, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Audiovox PRO 9171FT par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Audiovox PRO 9171FT.

Le manuel d’utilisation complet Audiovox, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Audiovox PRO 9171FT - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Audiovox PRO 9171FT, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lAudiovox PRO 9171FT qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Audiovox PRO 9171FT - qui devraient nous aider dans les premières étapes lors de l'utilisation Audiovox PRO 9171FT
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Audiovox PRO 9171FT
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Audiovox PRO 9171FT dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Audiovox PRO 9171FT?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Audiovox PRO 9171FT, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Audiovox PRO 9171FT il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)