-
BENDIX BIW 103 W - page 1
OPERA TING & INST ALLA TION INSTR UCTIONS W ASHING MA CHINE BIW 103 W 35.292.794/3 ...
-
BENDIX BIW 103 W - page 2
2 Installation ● This appliance is heavy . Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this product in any way . ● All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in inst ...
-
BENDIX BIW 103 W - page 3
3 Contents F or the User Important Safety Information 2 Y our New W ashing Machine 4 Description of the Appliance 5 Detergent dispenser drawer 5 The Control Panel 6 Operating sequence 7-10 W ashing 4.5 kg of white cotton at 90¡C 7 Load the laundry 7 Measure out the detergent 7 Measure out the fabric softener 7 Select the required option 7 Select t ...
-
BENDIX BIW 103 W - page 4
4 Y our New W ashing Machine Y our new washing machine meets all moder n r equirements for effective treatment of laundry with low water , energy and detergent consumption. ● Automatic cooling of the wash water to 60¡C before draining, with the 90¡C programme. This reduces thermal shock to fabrics, helping to prevent creasing. ● The special w ...
-
BENDIX BIW 103 W - page 5
5 Description of the Appliance 1 Detergent dispenser drawer 2 Programme guide 3 Rinse hold button 4 Half load button 5 ON/OFF button 6 Mains-on light 7 Programme selector dial 8 Door opening handle 9 Drain pump 10 Adjustable feet Deter gent dispenser dr a w er Prewash Main wash Fabric softener C0069 ...
-
BENDIX BIW 103 W - page 6
1 Pr ogr amme guide 2 RINSE HOLD button Press this button to make the machine stop with water in the drum after the wash cycle. This prevents any creasing which may take place if the clothes are left damp in the drum. When it is convenient for you to empty the machine, simply press this button again so that the machine can proceed to drain and shor ...
-
BENDIX BIW 103 W - page 7
7 Operating Sequence Before the first wash, we recommend that you run a cotton cycle at 60¡C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. W ASHING 4.5 KG OF WHITE COTTON A T 90¡C Suppose you have 4.5 kg of normally s ...
-
BENDIX BIW 103 W - page 8
8 6. Star t the machine Before starting up the machine check that: ● the appliance is plugged in ● the water supply taps are turned on ● the drain hose is correctly and securely positioned ● the door and the detergent dispenser drawer are closed. Depress the ON/OFF button: the mains-on light will illuminate and the machine starts operating. ...
-
BENDIX BIW 103 W - page 9
9 W ASHING 2 KG OF MIXED F ABRICS A T 50¡C Suppose you have 2 kg of Mixed fabrics to wash. They are rather delicate fabrics and should not be washed at a high temperature. 1. Load the laundr y Open the door by pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door . ...
-
BENDIX BIW 103 W - page 10
10 W ashing Hints Do NOT overload the machine. W eigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g T ablecloth 400-500 g Serviette 50-100 g T ea towel 70-120 g Linen hand towel 100-150 g T owelling hand towel 150-2 ...
-
BENDIX BIW 103 W - page 11
11 And in which f orm? Not only are there different types of deter gent, but they are also available in different forms. Whether you chose a powder or liquid in traditional or compact form is your own personal choice. TRADITIONAL POWDERS Pour the powder directly into the dispenser drawer . Do not sprinkle powder onto clothes in the machine drum. TR ...
-
BENDIX BIW 103 W - page 12
12 W ash Car e Symbols W ash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. W ASHING SYMBOL BLEACHING IRONING DR Y CLEANING TUMBLE DR YING ...
-
BENDIX BIW 103 W - page 13
13 (*) This programme at 60¡C with cold water filling and a wash load of 4.5 kg is the reference programme for the Energy label according to EEC Directive 92/75. W ater filling: 30¡- 30¡-40¡ programmes: cold water filling 50¡-60¡ pr og r ammes: hot and cold filling 90¡ pr og r ammes: hot water filling The programme times are intended as a gu ...
-
BENDIX BIW 103 W - page 14
14 W ashing Pr ogrammes Pr ogr ammes for synthetics, delicates and w ool Mixed fabrics Synthetic or mixed fabrics, underwear , coloured garments, non- shrink shirts, blouses. 7 Prewash W ash at 50˚C 3 rinses Short spin (*) 2 kg W ash programme Degree of soil and type of laundry Programme dial position Description Max. load Possible options W ool w ...
-
BENDIX BIW 103 W - page 15
15 Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply . Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening po ...
-
BENDIX BIW 103 W - page 16
16 ¥ When no more water comes out, unscrew the pump cover and remove it. Always keep a rag nearby to dry up spillage of water when removing the cover . • Remove any objects from the pump impeller by rotating it. ¥ Put the cap back on the emergency em ptying hose and place the latter back in its seat. ¥ Screw the pump cover fully in. ¥ Close t ...
-
BENDIX BIW 103 W - page 17
17 Something Not W orking Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer . Before contacting your local Service Force Centre, please carry out the checks listed below . IMPOR T ANT : if you call out an engineer to a fault listed below , or to repair a fault caused by ...
-
BENDIX BIW 103 W - page 18
18 Symptom The door will not open Possible causes ● The programme is still running. ● The door lock has not yet released. ● W ater in the tub: the door cannot be opened if water is present in the tub. Spinning starts late or the machine does not spin ● The electronic unbalance detection device has cut in because the laundry is not evenly di ...
-
BENDIX BIW 103 W - page 19
19 Guarantee Conditions Standar d guar antee conditions This guarantee is in addition to your statutory and other legal rights. W e, Bendix, undertake that if, within 12 months of the date of the purchase, this BENDIX appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option, r ...
-
BENDIX BIW 103 W - page 20
20 Installation Instructions T echnical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way . Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or co ...
-
BENDIX BIW 103 W - page 21
21 Unpacking All transit bolts and packing must be removed before using the appliance Y ou are advised to keep all the packaging for re-use in case the appliance has to be transported again. ■ Unscrew and remove the three rear transit bolts (using a spanner). ■ Lay the machine gently on its back, making sure that the hoses are not squashed. W e ...
-
BENDIX BIW 103 W - page 22
22 W ater inlet The inlets on the back of the appliance are colour coded, blue for cold and red for hot. Connect the hoses to a tap with a 3/4 thread. Do not use already employed inlet hoses. If only a cold water supply is available, connect the two hoses to a cold water outlet by means of a ˙Y¨ connection piece. Installation should comply with l ...
-
BENDIX BIW 103 W - page 23
23 W ater dr ainage This appliance is designed to be permanently plumbed into your home’s water supply and drainage system. The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic U-Piece supplied. The standpipe should have an internal diameter of approximately 38mm (see diagram) thus ensuring ...
-
BENDIX BIW 103 W - page 24
24 Le v elling Level the washing machine by loosening or tightening the feet. Once in the right position fix the feet by pushing the nuts against the base of the case. Accurate levelling prevents vibration, noise and displacement of the machine during operation. After levelling the machine, secure the feet by tightening the ring nuts with the aid o ...
-
BENDIX BIW 103 W - page 25
25 Electrical connections Any electrical work required to install this appliance should be carried out by a qualified electrician.or competent person W ARNING: THIS APPLIANCE MUST BE EAR THED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the same ...
-
BENDIX BIW 103 W - page 26
...
-
BENDIX BIW 103 W - page 27
...
-
BENDIX BIW 103 W - page 28
The Electrolux Group is the worldÑs largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. 14 billion USD in more than 150 countries around the world. E ...
Avez-vous une question à propos de BENDIX BIW 103 W?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec BENDIX BIW 103 W, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec BENDIX BIW 103 W il est probable qu’il a envie de partager la façon de le résoudre.