Français dropdown-ico

Manuel d’utilisation BenQ MW769

101 pages Non applicable
Télécharger

Aller à la page of 101

Summary
  • BenQ MW769 - page 1

    Digital Projector Us er Ma n u a l MX768/MW769 ...

  • BenQ MW769 - page 2

    Table of conten ts 2 Important safety instructions ................... 3 Introduction .................. 7 Projector featu res .......... ........... .......... ...... 7 Shipping content s ........... ............. .......... .... 8 Projector exte rior view ...... ........... ........ 10 Controls and functions ..... ........... .......... 11 Positi ...

  • BenQ MW769 - page 3

    Important sa fety instructions 3 Impor tant safety instructions Y our projector is designed and tested to meet the latest st andards for safety of information technology equipment. Howev er , to ensure saf e use of this product, it is important that you follow the instructions mentioned in th is manual and mark ed on the pr oduct. Safety Instructio ...

  • BenQ MW769 - page 4

    Important safety instruction s 4 Safety Instructions (Contin ued) 7. The lamp becomes extr emely hot during operation. Allow the projector to cool for appr oximately 45 minutes prior to r emoving the lamp assembly f or replacement. 8. Do not operate lamps beyond the rated lamp life. Excessive operation of lamps beyond the rated life could cause the ...

  • BenQ MW769 - page 5

    Important sa fety instructions 5 Safety Instructions (Continu ed) 13. Do not place this projector in an y of the following envir onments. - Space that is poorly v entilated or confined. Allow at least 50 cm clearance from walls and free flow of air ar ou nd the projector . - Locations where temperatur es may become excessively high, such as the ins ...

  • BenQ MW769 - page 6

    Important safety instruction s 6 Safety In struct ions (Con tinued) 16. Do not stand the projector on end vertically . Doing so ma y ca use the projector to fall ov er , causing injur y or resulting in damage to the projector . 17. Do not step on the projector or place any objects upon it. Besides pr oba ble ph ysical damage to the projector , doin ...

  • BenQ MW769 - page 7

    Introduction 7 Intr oduction Pr ojector featur es This model is one of the best pr ojecto rs a v ailable in the w orld. Y ou can enjoy the best video quality across various devices such as PC, laptop, D VD and VCR even document camera to bring all possibility to life. The projec to r offe rs t he fo llow ing feat ures. • 2D k eystone for easy hor ...

  • BenQ MW769 - page 8

    Introduction 8 Shipping contents Carefull y unpack and v erify that you ha ve all of the items sho wn below . If an y of these items are missing, please contact y our place of purchase. Standard accessories The supplied accessories will be suitable for y our region, and ma y differ from those illustrated. *The warranty card is only supplied in some ...

  • BenQ MW769 - page 9

    Introduction 9 Optional accessories 1. Spare lamp kit 2. Ceiling mount kit 3. BenQ wireless dongle 4. carry bag 5. 3D glasses ...

  • BenQ MW769 - page 10

    Introduction 10 Pr ojector exterior view 1. External control panel (See "Projector" on page 11 for details.) 2. Lamp cov er 3. Focus ring 4. Projection lens 5. Lens cov er 6. V entilation holes (intak e) 7. Zoom slide lever 8. Fr ont IR re mote sensor 9. Quick-release button 10. Audio output jack 11. Audio input jack 12. Audio (L/R) input ...

  • BenQ MW769 - page 11

    Introduction 11 Contr ols and functions Pr ojector 5. ECO BLANK Press the ECO BLANK button to turn off the image for a perio d of time with 70% lamp pow er sa ving. See "Hiding the image" on page 44 for details. 6. AUTO Automati cally d etermines t he best picture timings f or the displa yed image . See "Auto-adjusting the image" ...

  • BenQ MW769 - page 12

    Introduction 12 Mounting the projecto r W e want you to ha ve a pleasant experience using your BenQ pr ojector , so we need to bring this safety matter to your attent ion to prevent possible damage to person and property . If you intend to mount y o ur projector on the ceiling or wall, w e st rongl y recommend that you use a proper f itting BenQ pr ...

  • BenQ MW769 - page 13

    Introduction 13 Remote contr ol 1. ON T urns on the projector . See "Star ting up the projector" on page 27 for details. 2. COMPUTER 1/COMPUTER 2 Displa ys RGB (PC)/Component video (YPbPr/ YCbCr) signal. 3. MENU/EXIT T urns on the On-Screen Displa y (OSD) menu. Goes back to pre vious OSD menu, exits and sa ves menu settings . See "Us ...

  • BenQ MW769 - page 14

    Introduction 14 12. NETW ORK SETTING Displa ys Network Settings menu. See f or details. See "Network Settings" on page 71 for details. 13. Numbe r ke ys 14. OFF T urns off the projector . See "Shutting down the projector" on page 66 for details. 15. COMPO 1/COMPO 2 Not operational on th is projector . 16. HDMI 1/HDMI 2 Displa ys ...

  • BenQ MW769 - page 15

    Introduction 15 Infra-Red (IR) r emote control sens or is locate d on the front of the pr ojecto r . The remote control m ust be held at an angle within 22.5 degrees perpendicular to the pr ojector's IR remote contr ol sensor to function corre ctly . The distance between the remote contr ol and the sensor should not exceed 8 meters (~ 26 feet) ...

  • BenQ MW769 - page 16

    Positioning your projector 16 P ositioning y o ur pr ojector Choosing a location Y our room la yout or personal preference will dictate which installation location you select. T ake into consideration the size and position of y our screen, the lo cation of a suitable power outlet, as w ell as the location and distance between the pr o jector and th ...

  • BenQ MW769 - page 17

    Positioning your projector 1 7 Obtaining a pr eferr ed pr ojected imag e siz e The distance fr om the pr ojecto r lens to the scr een, the zoom setting (if a vailable), and the video format each factors in the projected image size. The projector should al ways be placed hori zontally lev el (like flat on a table), and positioned directly perpendicu ...

  • BenQ MW769 - page 18

    Positioning your projector 18 Pr ojection dimensions Refer t o "Dimensions" on page 93 for the center of lens dimensions of this projector befor e calculating the appr opriate position. MX768 For example, If you ar e using the MX768 and a 200-inch screen, the pr ojection distance is 7417 mm and with a vertical offset of 457 mm. If you ar ...

  • BenQ MW769 - page 19

    Positioning your projector 1 9 MW769 For example, If you ar e using the MW769 and a 200-inch screen, the pr ojection distance is 7797 mm and with a vertical offset of 337 mm. If you ar e using the MW769 and your measur ed projection distance is 5.8 m (5800 mm), the closest match in the "Distance fr om screen (mm)" column is 5848 mm. Looki ...

  • BenQ MW769 - page 20

    Connection 20 Connection When connecting a sig nal sour ce to the proj ector , be sure to: 1. T urn all equipment off bef ore making an y connections. 2. Use the correct si gnal cables for each sour ce. 3. Ensure th e cables are f irmly inserted. • In the connections shown belo w, some cab les ma y not be included with the projector (see "Sh ...

  • BenQ MW769 - page 21

    Connection 21 Computer system r equirements f or USB displa y:: Computer system requir ements for WiFi displa y:: Computer system requir e men ts for LAN display:: 1. Audio cable 7. USB cable (mini-B to type A) 2. Microphone 3.5 mini jack cable 8. Audio L/ R cable 3. V GA cable 9. Video cable 4. V G A to D VI-A cable 10. S-Video cable 5. HDMI cable ...

  • BenQ MW769 - page 22

    Connection 22 Connecting a computer or monitor Connecting a computer The projector can connect to both IBM ® compatibles and Macintosh ® computers. A Mac adapter is needed if you ar e connect ing legacy version Macintosh computers. T o connect the projector to a notebook or desktop compu ter (using V GA): 1. T ake the supplied V GA cable and conn ...

  • BenQ MW769 - page 23

    Connection 23 T o connect the projector to a notebook or desktop compu ter (using HDMI): 1. T ake a HDMI cable and connect one end to the HDMI jack of the computer . 2. Connect the other end of the cable to the HDMI-1 or HDMI-2 jack on the pr ojector . • Many notebooks do not turn on thei r external video por ts when connected t o a projector . U ...

  • BenQ MW769 - page 24

    Connection 24 Connecting Video sour ce de vices Y ou need only conne ct the pr ojector to a Vide o source device using just one of the abov e connecting methods, howe ver each pro vides a differ ent level of video quality . The method you choose will most likel y depend upon the a vailability of m atching terminals on both the projector and the Vid ...

  • BenQ MW769 - page 25

    Connection 25 • In the unlikely e vent that you connect the projector to a D VD play e r via the projector's HDMI input and the pr ojected picture displa ys wr ong colors, please change the color space to YUV . See "Changing Color Space" on page 37 for deta ils . Connecting a Component Video sour ce de vice Examine your Video sour ...

  • BenQ MW769 - page 26

    Connection 26 Connecting an S-Video/co mposite sour ce de vice Examine your Video sour ce device to determine if it has an unuse d S-Video/composite output jack a vailable: • If it has both jacks, use the S-Video output jack for connection as the S-Video terminal pr ovides better picture qualit y than the Video terminal. • If it has either of t ...

  • BenQ MW769 - page 27

    Operation 27 Operation Star ting up the pr ojector 1. Plug the power cord into the pr ojector and into a pow er outlet. Check that the PO WER indicator light on the projector lights orange after power has been applied. • Please use the original acce ssori es (e .g. power cable) only with the devi ce to av oid possible dangers such as electric sho ...

  • BenQ MW769 - page 28

    Operation 28 Y ou can also press SOURCE on the pr ojector or r emote cont rol to select y our desired input signal. See "Switching input signal" on page 36 for details. • If no signal is detected fo r 3 minutes, the projector auto matically enters ECO BLANK mode. Adjusting the pr ojected imag e Adjusting the pr ojection angle The projec ...

  • BenQ MW769 - page 29

    Operation 29 • Using the pr ojector or remote contr ol Press / / / to display the 2D Keystone page. Press / to adjust v ertical values fr om -30 to 30. Press / to adjust horizontal values from -25 to 25. •U s i n g t h e O S D m e n u 1. Press MENU/EXIT and select the DISPLAY menu. 2. Press to select 2D Keystone and press MODE/ENTER . 3. Press ...

  • BenQ MW769 - page 30

    Operation 30 2. Press / / / to select one of the four corners and pres s MODE/ENTE R . 3. Press / to adjust vertical values from 0 to 60. 4. Press / to ad just horizon tal values from 0 to 60. •U s i n g t h e QUICK INSTA LL key 1. Press QUICK INSTALL o n t h e re m o te c o nt ro l. 2. Press to select Corner Fit and press MODE/ ENTER . 3. Follow ...

  • BenQ MW769 - page 31

    Operation 31 3. Press / to select the direction and press MODE/ENTER . Only one Surface Fit setting will be stor ed so if you want to change from the pr evious direction to the other , the notice message will pop-up to r emind you to reset the pr evious Surface Fit setting. 4. Press / to adjust the left or/and right side conv ex or conca ve. Defaul ...

  • BenQ MW769 - page 32

    Operation 32 8. Press / to adjust the top or/and bottom side conv ex or conca ve. Default is 0 and value is -40~0~40. Single side adjustment is only for distortion. 9. For both sides of the vertical surface fit, use / to adjust the center of the cur ve because it is not alwa ys at the center . Default is 0 and value is -40~0~40. •U s i n g t h e ...

  • BenQ MW769 - page 33

    Operation 33 Using the menus The projector is equipp ed with On-Screen Displa y (OSD) menus for making various adjusents an d settings. Below is the ov erview of the OSD menu. The following example describes ho w to set the OSD menu. 1. Pres s MENU/ EXIT on the pr ojecto r or re m o te c on t rol t o tu r n t h e OS D menu on. 3. Pres s to select B ...

  • BenQ MW769 - page 34

    Operation 34 Securing the pr ojector Using a security cable lock The projector has to be installed in a safe pl ace to prev ent theft. Otherwise, purchase a lock, such as the K ensington lock, to secur e the projector . Y ou can locate a K ensington lock slot on the rear side of the pr ojector . See item 25 on page 10 for details. A K ensington sec ...

  • BenQ MW769 - page 35

    Operation 35 If y o u forg et the passw ord If the passw ord function is activated, yo u will be asked to enter the six-digit password e very time you turn on the projector . If you enter the wrong passw ord, the passw ord err or message as pictured to the right displa ys lasting for three seconds, and the message 'INPUT P ASSW O RD' foll ...

  • BenQ MW769 - page 36

    Operation 36 7. T o lea ve the OSD men u, pres s MENU/ EXIT. Disabling the pass w ord function T o disable passw o rd pr otection, go back to the SYSTEM SETUP: Advanced > Security Settings > Change Security Settings menu after opening the OSD men u system and pr ess MODE/ENTER . The message 'INPUT P ASSW O RD' displa ys. Enter the c ...

  • BenQ MW769 - page 37

    Operation 37 image distortion or loss of picture clarity . See "Selecting the aspect ratio" on page 37 for details. Changing Color Space In the unlik ely ev ent that you connect the projector to a D VD play er via the projector's HDMI input and the projecte d picture displa ys wr ong colors, please change the color space to YUV . 1. ...

  • BenQ MW769 - page 38

    Operation 38 About the aspect ratio In the pictures belo w , the black portions are in active ar eas and the white portions are active areas. OSD menus can be displa yed on those unused black ar eas. 1. Auto : Scales an imag e proportionall y to fit the projector's nativ e resolution in its horizontal or vertical width. This is suitable for th ...

  • BenQ MW769 - page 39

    Operation 39 Optimizing the imag e Selecting a pictur e mode The projector is pr eset with several pr edefined picture modes so that y ou can choose one to suit your operating environment and input signal picture type. T o select an operation mode that suits your need, you can follow one of the following steps. •P r e s s MODE/ENTER o n t h e r e ...

  • BenQ MW769 - page 40

    Operation 40 Using W all Color In the situation wher e y ou are projecting on to a colored surface such as a pai nted wall which ma y not be white, the Wall Color feature can help cor rect th e projected pictur e’ s color to prev ent possible color difference betw een the source and pr ojected pictures. T o use this function, go to the DISPLAY &g ...

  • BenQ MW769 - page 41

    Operation 41 Selecting a Color Temperature The options available for color temperature* settings vary according to the signal type selected. 1. Cool: Makes images app ear bluish white . 2. Normal: Maintains normal colorings for white. 3. Wa r m : Makes images appear reddish white . *About color te mperatur es: There ar e many diff erent sh ades tha ...

  • BenQ MW769 - page 42

    Operation 42 T o adjust the settings: 1. Go to the PICTURE menu and sel ect 3D Color Management . 2. Press MODE/ENTER and the 3D Color Management page displays. 3. Select Primary Color and press / to select a color from among Red, Y ellow , Green, Cyan, Blue, or Magenta. 4. Press to select Hue and press / to select its range . Increase in the range ...

  • BenQ MW769 - page 43

    Operation 43 Setting the pr esentation timer The presentation timer can indicate the pr es entation time on the screen to help you achieve better time management when giving pr esentations. Follow these steps to utilize this function: 1. Go to the SYSTEM SETUP: Basic > Presentation Timer men u and press MODE/ENTER to displa y the Presentation Ti ...

  • BenQ MW769 - page 44

    Operation 44 Hiding the imag e In order to dra w the audience's full attention to the presen ter , you can use ECO BLANK to hide the screen image. Pres s any k ey on the projector or remote contr ol to restore the image. Eco Blank wording appears at the sc reen while the image is hidden. When this function is activated with an audio input conn ...

  • BenQ MW769 - page 45

    Operation 45 Adjusting the sound The sound adjusents mad e as belo w will ha ve an effect on the projector speaker(s). Be sur e you ha ve made a cor rect con nection to the pr ojector audio input. See "Connection" on page 20 for how the audio input is connected. Muting the sound T o adjust the sound level, pr ess MUTE on the remote contro ...

  • BenQ MW769 - page 46

    Operation 46 P ersonalizing the pr ojector menu displa y The On-Screen Displa y (OSD) menus can be set according to your pr eferences. The following settings do not affect the pr ojection settings, operation, or performance . • Language in the SYSTEM SETUP: Basic menu sets your familiar language for the OSD menus. Pr ess MODE/ENTER t o d i s p l ...

  • BenQ MW769 - page 47

    Operation 47 U s e Te a c h i n g Te m p l a t e Making writing on the boar d easier for teachers, y ou can use build-i n template by OSD . Open the OSD menu and go to the DISPLAY > Teaching Template . Choose Blackboard/ Whiteboard > Off / Letter F ormation/W orksheet / Coordinate Cha rt . The T eaching T emplate displa ys. Teaching Template ...

  • BenQ MW769 - page 48

    Operation 48 Contr olling the pr ojector thr ough a LAN en vironment Network Settings allow you to manage th e pr ojector from a computer using a w eb bro wser when the computer and the pr ojector are pr operly connected to the same local area ne twork. Configuring the Wir ed LAN Sett ings If y ou ar e in a DHCP en vir onment: 1. T ake a RJ45 cable ...

  • BenQ MW769 - page 49

    Operation 49 Configuring the Wir eless LA N Settings 1. Connect the BenQ wir eless dongle (optio nal) to the USB TYPE-A input jack of the pr ojector . 2. Select Wireless LAN in SYSTEM SETUP: Advanced > Network Settings menu and pr ess MODE/ENTER . 3. For AP mode connection, you need to note SSID information, then sear ch the projector with the s ...

  • BenQ MW769 - page 50

    Operation 50 2. The BenQ remote netw ork operation page opens. • The web pag e control supports IE version 7.0 or higher . • The illustrations in web pa ge contr ol, Q Pr es enter a nd USB Read er secti ons ar e for t he purpose of explanation and ma y differ from the a ctual design of your projector . 3. Click Download to sa ve Q Presen ter so ...

  • BenQ MW769 - page 51

    Operation 51 i. The se buttons function the same as the ones on the remote contr ol. See "Remote control" on page 13 for details. The Displa y Setting page allows y ou to operate the projector as if y o u wer e using the OSD menus. These fu nctions are some useful menu set tings. The Pictur e Setting page allows y ou to manage the pr ojec ...

  • BenQ MW769 - page 52

    Operation 52 The Information page displa ys the info rmation and status of this projector . The Confer ence Contro l page allows you to co ntrol computer’ s displa y status of all the computers linked to this projector . ...

  • BenQ MW769 - page 53

    Operation 53 The Crestr on page is only a vailable when y ou are on a Wir ed LAN netw ork. It also allows you to contr ol the projector r emotely . The Crestr on supports RoomView version 6 .2.2.9. i. These buttons function the same as the ones on the OSD menus or remote control. See "2. PICTURE" on page 68 and "Remote contr ol" ...

  • BenQ MW769 - page 54

    Operation 54 i. Y ou ca n name the projector , keep track of its location a nd the person in charge of it. ii. Y ou can adjust the Wired LAN settings. iii. Once set, access to the r emote net wor k operation on this pr ojector has been passw ord-pr otected. iv . Once set, access to the tools page has been passwor d-protected. After making the adjus ...

  • BenQ MW769 - page 55

    Operation 55 The Admin page allows y ou to enter Basic, Wired LAN, Wireless LAN and Mail pages once the passw ord is entered. The default pa ssw ord is “0000”. If you wan t to change the passw ord, please enter Basic page. The Basic page allo ws you to change the passw ord and select connected persons. Th e number of connected persons ma y affe ...

  • BenQ MW769 - page 56

    Operation 56 The Wired LAN page allows you to adjust the Wired LAN sett ings. The Wireless LAN page allo ws you to adjust the Wirless LA N settings. Max. length for SSID string is 16 bytes. Plea se use a differ ent SSID when more than two projectors ar e connecting thr ough wireless LAN. ...

  • BenQ MW769 - page 57

    Operation 57 The Mail page a llows you to send al ert e-mail to your ITS administrator . Y ou can first tr y the Mail T est function to check if the Aler t Mail works. Using the W e b Contr ol Lock This function is designed to prev ent unauth orized people from maliciously changing the projector settings thr ough the Projector Network Displa y Syst ...

  • BenQ MW769 - page 58

    Operation 58 1. Go to the SYSTEM SETUP: Advanced > Security Settings > Chang e Security S ettings menu after opening the OSD menu system. Press MODE/ ENTER . The message “INPUT P ASSW ORD” appears. Enter the curr ent password. If the password is correct, the OSD menu returns to the Security Sett ings page . Press to select Web Control Loc ...

  • BenQ MW769 - page 59

    Operation 59 ii. Projectors link ed in the LAN will be found. Then select the projector you want to link. iii. Click “Connect”. Then you should be able to see the image on pr ojector . iv . Y ou can click to disconnect all connected projectors.. The Special Feature page allows y ou to hav e some advanced functions to manage th e displa y image ...

  • BenQ MW769 - page 60

    Operation 60 appers on th epr ojector . Y ou can change th elocation anytime y ou want, ev en back to ful l scr een or blank out. The Basic and Advanced Setti ngs pages allow y ou to configure th e Q Presenter . i. Y ou ca n select whether to activa te Remote Desktop function. If t he Remote Desktop function is activated, you can ch ange the Name a ...

  • BenQ MW769 - page 61

    Operation 61 vii. Y ou can select Video or Graphic displa y mode . Graphic Mode: worse image quality but faster tramsmission speed. Video Mode: better image quality but slow er transmission speed. How ev er , th e actual transmission performance was determined by the status of network usage at that time . viii. Y ou can select whether to automatica ...

  • BenQ MW769 - page 62

    Operation 62 Using the br oadcassting function When it comes to 1:N LAN Dispa ly ,ther e are two wa ys to do this function: 1. By TCP/IP (support up to 8 porjectors, original design) 2. By Multicast(support up to 255 projectors, this ne w design) Y ou can select channel 1, 2, 3, 4, 5,6...25 with showing the corrspondent IP(gra y o ut). There ar e 1 ...

  • BenQ MW769 - page 63

    Operation 63 Remote Desktop Contr ol through Q Pr esenter The Q Presen ter can pr oceed the Remote Desktop Control (RDC) the host PC fr om projector site. 1. Setup the RDC login account (User name and Password ) in Q Presenter . • Name: must be 8 English capital letters A~Z an d number 0 ~9. • Passw ord: must be 6 digi ts and limit the range fr ...

  • BenQ MW769 - page 64

    Operation 64 2. Activate Remote Desktop Contr ol Function in Q Pr esenter > Settings > Basic Settings . 3. Open the OSD menu and go to the SYSTEM SETUP: Advanced > Netwo rk Settings menu. Pr ess MODE/ENTER . 4. Select Remote D esktop and press MODE/ ENTER . 5. Enter the Account and Pas swo r d the same as step 1. 6. Select Connect and pre ...

  • BenQ MW769 - page 65

    Operation 65 T o view y o ur pictures as a slidesho w , follow these steps: 1. Connect a USB flash drive to y our computer and cop y files from y our com puter to the USB flash drive. 2. T urn on your pr ojector if needed. 3. Remove the USB flash drive fr om your computer and plug it into the USB TYPE-A jack of the pr ojector . 4. Select USB Reader ...

  • BenQ MW769 - page 66

    Operation 66 Shutting do wn the pr ojector 1. Press Power on the projector . A confirmation message displa ys prompting you. If you don't r espond in a few seconds, the message will disappear . If you use the remote control, pr ess OFF to shut down the projector . 2. Press Power on the projector a second time. The PO WER indicator light flashe ...

  • BenQ MW769 - page 67

    Operation 67 Menu operation Menu system Please note that the on-screen displa y (OSD) menus var y acco rding to the signal type selected. Main menu Sub-menu Options 1. DISPLAY Wall Color Off /Light Y ellow/Pink/Light Green/ Blue/Blackboard Aspect Ratio Auto /Real/4:3/16:9/16 :10 2D Keystone Corner Fit Surface Fi t Horizontal Surface Fit Vertical Su ...

  • BenQ MW769 - page 68

    Operation 68 2. PICTURE Pictur e Mode Dynamic / Presentation / sRGB / Cinema /(3D)/ Us er 1 / User 2 Reference Mode Dynamic / Presentation / sRGB / Cinema /(3D) Brightness Contrast Color Tint Sharpness Brilliant Color On/ Off Color Temperature Cool/ Normal /W arm Color Temperature Fine Tuni ng R Gain/G Gain/ B Gain/R Offset /G Offset/B Offset 3D Co ...

  • BenQ MW769 - page 69

    Operation 69 4. SYSTEM SETUP: Basic Presentation Timer Timer Period 1~240 minutes Timer Display Always /1 min/2 min/3 min/Ne ver Timer Position Top-Left /Bottom-Left/T op-Right/ Bottom-Righ t Timer Counting Direction Count Down /Cou nt Up Sound Reminder On/ Off On / Off Yes /No Language Projector Installa tion Front Table /Rear T able/Rear Ceiling/ ...

  • BenQ MW769 - page 70

    Operation 70 5. SYSTEM SETUP: Advanced High Altitude Mode On/ Off Ye s / No Audio Settings Mute On/ Off Volume 0~10 Microphone Volume 0~10 Power On/Off Ring Tone On /Off Lamp Settings Lamp Mode Normal/Economic/ Smart Eco Reset Lamp Timer Ye s / No Equivalent Lamp Hour Security Settings Change Password Change Security Power On Lock On/ Off Web Contr ...

  • BenQ MW769 - page 71

    Operation 71 Note that the menu items ar e available when th e pr ojector detect s at least one valid signal. If there is no equipment connected to the pr ojector or no signal detected, limited menu items are accessible. 5. SY STEM SETUP: Advanced Network Settings Wired LAN Status DHCP IP Address Subnet Mask Default Gatewa y DNS Ser ver Apply Wirel ...

  • BenQ MW769 - page 72

    Operation 72 Description of each menu • The default values listed in th is manual, especially on pag es 72-82 , are for reference only . They ma y var y between the projectors due to the continuous impr o vement to the products . FUNCTION DESCRIPTION Wall Color Corr ects the projected pictur e’ s colo r when the projection surface is not white. ...

  • BenQ MW769 - page 73

    Operation 73 FUNCTION DESCRIPTION 3D This projector f eature s a 3D function which enables you to enjoy the 3D movies, videos, and sporting ev ents in a more realistic wa y by presentin g the depth of the images. Y ou need to wear a pair of 3D glasses to view the 3D images. 3D Mode The default setting is Au to and the projector automatically choose ...

  • BenQ MW769 - page 74

    Operation 74 FUNCTION DESCRIPTION Picture Mode Pre- defined pictur e modes ar e provided so y ou can optimize y our projector image set-up to suit y our program type. See "Selecting a picture mode" on page 39 for details. Reference Mode Selects a picture mode that best s uits your need f or the image quality and further fine-tune the imag ...

  • BenQ MW769 - page 75

    Operation 75 FUNCTION DESCRIPTION Brilliant Color Adjusts white peaking while mainta ining correct color presentation. See "Adjusting Brilliant Color" on page 40 for det ail s. This function is only a vailabl e when User 1/2 is selected. Color Temperature See "Selecting a Color T emperature" on page 41 f or details. This functio ...

  • BenQ MW769 - page 76

    Operation 76 FUNCTION DESCRIPTION Presentation Timer Reminds the presenter to finish the presentation within a certain time frame. See "Setting the presentation timer" on page 43 for details. Timer Period Sets a prefer red length of time for presentation. Timer Display Sets whether to displa y the timer on screen. Timer Position Sets the ...

  • BenQ MW769 - page 77

    Operation 77 FUNCTION DESCRIPTION Operation Settings Direct Power On Selecting On enables the function. See "Starting up the pr ojector" on page 27 for details. Signal P o wer On Selecting On the pr ojector will turn on automat ically when V GA signal is detect ed. Selecting Off the pr ojector has to be turnned on manuall y (by k eypad or ...

  • BenQ MW769 - page 78

    Operation 78 FUNCTION DESCRIPTION Remote Receiver Sets which IR remote sensor of the projector will r eceive the signal from the r emote control. Panel Key Lock Disables or enables all panel ke y functions except P ower on the projector and k eys on the r emote control. Background Color Allows you to select which backgr ound co lor will display whe ...

  • BenQ MW769 - page 79

    Operation 79 FUNCTION DESCRIPTION High Altitude Mode A mo de fo r oper ati on in high alt itud e areas . Se e "Operating in a high altitude envir onment" on page 44 for details. Audio Settings Allows you to enter the audio setting menu. See "Adjusting the sound" on page 45 for details. Mute Sets the mute function. Volume Adjusts ...

  • BenQ MW769 - page 80

    Operation 80 FUNCTION DESCRIPTION Test Pattern Selecting On enables the function and the projector displa ys the grid test pattern. It helps you adjust the image size and focus and check that the projected image is fr ee from distortion. Closed Caption Closed Caption Enab le Activates the function by selecting On when the selected input signal carr ...

  • BenQ MW769 - page 81

    Operation 81 FUNCTION DESCRIPTION Standby Settings Network Selecting On enables the function, and the projector can be monitored or contr olled over a network when it is in standby mode. Microphone Selecting On enables the function, and the micr ophone can be used ev en in standby mode Monitor Out Selecting On enables the function. The pr ojector c ...

  • BenQ MW769 - page 82

    Operation 82 FUNCTION DESCRIPTION Network Settings AMX Device Discovery Selecting On the projector can be dete cted by AMX controller . Mac Addres s Show Mac address. Reset All Settings Returns all settings to the fact ory preset values. The foll owing sett ings will still remain: User 1, User 2, Pr ojector P osition, Color Space Conv ersion, High ...

  • BenQ MW769 - page 83

    Maintenance 83 Maintenance Car e of the projector Y our projector needs little maintenance. The on ly thing y ou need to do on a regu lar basis is to keep th e lens and case clean. Nev er remo ve any parts of the projector except th e lamp. Contact y our dealer if other parts need replacing. Cleaning the lens Clean the lens whenev er you notice dir ...

  • BenQ MW769 - page 84

    Maintenance 84 Lamp information Getting to kno w the lamp hour When the projector is in operation, the durati on (in hours) of lamp usage is automatically calculated by the built-in timer . The method of calculating the equivalent lamp hour is as follows: T otal (equivalent) lamp hour = 1 (hours used in Economic mode) + 4/3 (hours used in normal mo ...

  • BenQ MW769 - page 85

    Maintenance 85 presentation, s elect Disable . The projector will not automatically shut do wn in a certain time period. Timing of r eplacing the lamp When the Lamp indicator lights up red or a me ssage appears suggesting it is tim e to replace the lamp , please install a new lamp or consult your dealer . An old lamp ma y cause a malfunction in the ...

  • BenQ MW769 - page 86

    Maintenance 86 Replacing the lamp • Hg - Lamp contains merc ury . Manag e in accordance with local disposal la ws. See www .lamprecycle.org. • If lamp replacement is performed while the projector is suspended upside-do wn from the ceiling, make su re that no one is underneath the lamp socket to a void an y possible injur y or damage to the huma ...

  • BenQ MW769 - page 87

    Maintenance 87 3. Remove the lamp cov er by (a) sliding the cov er toward the side of the projector and (b) lifting it off. • Do not turn the power on with the lamp cov er remov ed. • Do not inser t your fing ers between the lamp and the projector . The sharp edges inside the projector ma y cause injuries. 4. Loosen the scre ws that secure the ...

  • BenQ MW769 - page 88

    Maintenance 88 11. Restart the projector . Do not turn the power on wi th the lamp cover r emoved. Resetting the lamp timer 12. After the startup logo , open the On-Screen Displa y (OSD) menu. Go to the SYSTEM SETUP: Advanced > Lamp Sett ings menu. Press MODE/ENTER . The Lamp S ettings page displa ys. Press to select Reset Lamp Timer and press M ...

  • BenQ MW769 - page 89

    Maintenance 89 Indicators Light Status & Description PO WER TEMP LAMP1 LAMP2 Po w e r e v e n t s Orange Off Off Of f Stand-by Gre en Flashing Off Off Off P owering up Gre en Off Off Off Normal operation Orange Flashing Off Off Off Normal power -down cooling Red Off Off Off Download Gre en Off Red Off CW start fail Red Flashing Off Off Off Scal ...

  • BenQ MW769 - page 90

    Maintenance 90 Gre en Flashing Red Off Off T emperatur e 2 err or (over limited temperatur e) Gre en Flashing Red Flashing Off Off Thermal Sensor 2 open err or Gre en Flashing Gre en Off Off Thermal Sensor 2 short err or Gre en Flashing Gre en Flashing Off Off Thermal IC #2 I2C Connection err or ...

  • BenQ MW769 - page 91

    Troubleshooting 91 T r oubleshooting The projector does not turn on. No picture Blurr ed image Remote contr ol does not work The passw ord is incorr ect Cause Remedy There is n o power fr om the power cab le. Plug the po wer cor d into the A C inlet on the projector , and pl ug the power cord into the power outlet. If the power outlet has a switch, ...

  • BenQ MW769 - page 92

    Specifications 92 Specifications All specifications ar e subject to change without notice. Lamp life res ults will vary depending on envir onmental conditions and usa ge. Optical Resolution (MX768) 1024 x 768 XGA (MW769) 1280 x 800 WXGA Display system 1-CHIP DMD Lens F/Number (MX768) F= 2.58~3.4 f= 15.94mm~25.5 mm (MW769) F= 2.42~2.98 f= 20.77mm~31 ...

  • BenQ MW769 - page 93

    Specifications 93 Dimensions 329 mm (W) x 137.2 mm (H) x 248.7 mm (D ) Ceiling mount installation 329 248.7 137.2 62.5 77.4 75.0 221.0 100.0 146.0 329.0 163.7 62.5 127.7 329.0 163.7 62.5 577.7 625.95 537.9 25 132.16 1 15.1 72.87 Ceiling moun t scre w: M4 (Max L = 25 mm; Min L = 20 mm) Unit: mm ...

  • BenQ MW769 - page 94

    Specifications 94 Timing char t Supported timing for D-SUB input PC timing Resolution Mode Ve r t i c a l Fr equency (Hz) Horizontal Fr equency (kHz) Clock (MHz) 720 x 400 720 x 400 _70 70. 087 31.469 28.3221 640 x 480 VGA _ 6 0* 1 59.940 31.46 9 25.175 VG A_72 72.809 37.86 1 31.500 VG A_75 75.000 37.50 0 31.500 VG A_85 85.008 43.26 9 36.000 800 x ...

  • BenQ MW769 - page 95

    Specifications 95 * 1 Supported timing for 3D signal with Field Sequential, ov er -under and side-by-side format. * 2 Supported timing for 3D signal with Field Sequential format. * 3 Supported timing for 3D signal with ov er -under and side-by-side format. There 3D timing sho wing depend the EDID file and V GA display card. It is possible that user ...

  • BenQ MW769 - page 96

    Specifications 96 * 1 Supported timing for 3D signal with Field Sequential, ov er -under and side-by-side format. * 2 Supported timing for 3D signal with Field Sequential format. * 3 Supported timing for 3D signal with over -under and side-by-side format. There timing sho w ing depend the EDID file and V GA graphic card limitation. It is possibl e ...

  • BenQ MW769 - page 97

    Specifications 97 Supported timing for Component Video Input *Supported timing for 3D signal with Field Sequential format. Supported timing for Video and S-Video inputs *Supported timing for 3D signal with Field Sequential format. Timing Resolution Horizontal Fr equency (kHz) Ve r t i c a l Fr equency (Hz) Dot Clock Fr equency (MHz) 480i* 720 x 480 ...

  • BenQ MW769 - page 98

    Specifications 98 Support ed 3D signal for HDMI (HDCP) input Video timing PC timing Timing Resolution Horizontal frequency (KHz) Ve r t i c a l frequency (Hz) 3D Field Sequential 3D frame packing 3D ove r - under 3D side by side 480i 720 (1440) x 480 15.73 59.94 ◎ 480p 720 x 480 31.47 59.94 ◎ 576i 720 (1440) x 576 15.63 50 576p 720 x 576 31.25 ...

  • BenQ MW769 - page 99

    Specifications 99 Supported 3D signal for D-SUB inpu t PC timing 1280 x 800 WXGA_60 59.81 49.702 ◎◎ ◎ WXGA_75 74.934 62.795 WXGA_85 84.88 71.554 WXGA_120 (Reduce Blanking) 119.909 101.563 ◎ 1280 x 1024 SXGA_60 60. 02 63.981 ◎◎ SXGA_75 75.025 79.976 SXGA_85 85.024 91.146 1280 x 960 1280 x 960_60 60 60 ◎◎ 1280 x 960_85 85.00 2 85.938 ...

  • BenQ MW769 - page 100

    Specifications 100 Supported 3D signal for Video and S-Video input 1280 x 720 1280 x 720_60 60 45 ◎◎ ◎ 1280 x 720_120 120 90 ◎ 1280 x 768 1280 x 768_60 (Reduce Blanking) 60 47.396 ◎◎ ◎ 1280 x 768_60 59 .87 47.77 6 ◎◎ ◎ 1280 x 800 WXGA_60 59.81 49.702 ◎◎ ◎ WXGA_75 74.934 62.795 WXGA_85 84.88 71.554 WXGA_120 (Reduce Blanking ...

  • BenQ MW769 - page 101

    Warranty and Copyright information 101 W arran ty and Cop yright information P atents This BenQ pr ojector is cov ered b y the following patents: U.S. paten ts 6,837,608; 7,275,834; 7,18 1,318; TW patents 202690; 2054 70; I228635; I259932; China Patents ( 中国发明专利 ) ZL01143168.7; ZL03119907.0; ZL200510051609.2 Limited warranty BenQ warran ...

Fabricant BenQ Catégorie Video projector

Les documents que nous recevons du fabricant de l'appareilBenQ MW769 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques BenQ
- manuels d’utilisations MW769
- fiches produit BenQ
- dépliants
- ou étiquettes-énergie BenQ MW769
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation BenQ MW769.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation BenQ MW769, manuels d’entretien, brefs manuels ou manuels de l’utilisateur BenQ MW769. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit BenQ MW769.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil BenQ MW769, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser BenQ MW769 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs BenQ MW769.

Le manuel d’utilisation complet BenQ, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel BenQ MW769 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières BenQ MW769, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lBenQ MW769 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil BenQ MW769 - qui devraient nous aider dans les premières étapes lors de l'utilisation BenQ MW769
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de BenQ MW769
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service BenQ MW769 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de BenQ MW769?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec BenQ MW769, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec BenQ MW769 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)