-
Zanussi FLS 1084 - page 1
W ASHING MA CHINE FL S 1084 Whites Fast coloureds Non-fast coloureds Synthetics Mixed fabrics Wool A B C D J K L Temp. 95º 60º 40º 50º 40º Delicates Quick wash Worn once Rinses Spin P Q R M F N G H Temp 40º 40º 30º INS TRUCTION BOOKLE T 124976350 ...
-
Zanussi FLS 1084 - page 2
2 Y our New W ashing Machine i Y our new washing machine meets all modern needs for effective treatment of laundry with low water , energy and deter gent consumption. ■ A utomatic cooling of the w ash water to 60°C before draining, with the 95°C programme, pre vents distortion of plastic pipes in the domestic water system due to the high temper ...
-
Zanussi FLS 1084 - page 3
Istallation ■ This appliance is heavy . Care should be taken when moving it. ■ It is dangerous to alter the specifications or attempt to modify this product in any way . ■ All packing and transit bolts must be remov ed before use. Serious damage can occur to the product and to property if this is not adhered to. See relev ant section in instr ...
-
Zanussi FLS 1084 - page 4
4 Contents F or the User Y our New W ashing Machine 2 Important Safety Information 3 Description of the Appliance 5 Door locked light 5 Detergent dispenser drawer 5 The Control Panel 6 Operating sequence 7-10 W ashing 4.5 kg of withe cotton a t 95°C 7 Load the laundry 7 Measure out the detergent 7 Measure out the fabric softener 7 Select the requi ...
-
Zanussi FLS 1084 - page 5
5 Description of the Appliance 1 Detergent dispenser drawer 2 Programme guide 3 “Options” buttons 4 “Mains-on” light 5 Programme selector dial/ON/OFF switch 6 Door opening handle 7 Filter 8 Adjustable feet Deter gent dispenser dr a w er Pre wash W ash Fabric softener 2 7 6 5 4 3 1 8 C0006 ...
-
Zanussi FLS 1084 - page 6
6 The Contr ol Panel Whites Fast coloureds Non-fast coloureds Synthetics Mixed fabrics Wool A B C D J K L T emp. 95º 60º 40º 50º 40º Delicates Quick wash Worn once Rinses Spin Drain P Q R M F N G H T emp. 40º 40º 30º 12 3 4 5 6 7 5 Extr a Rinse button By depressing this button the machine will perform the rinses with high water le vel. This ...
-
Zanussi FLS 1084 - page 7
7 Operating Sequence Before the first w ash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remov e any manuf acturing residue from the drum and tub . Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. W ASHING 4.5 KG OF WHITE CO TTON A T 95°C Suppose you hav e 4.5 kg of norm ...
-
Zanussi FLS 1084 - page 8
8 5. Select the r equir ed pr ogr amme T urn the programme selector dial clockwise to the required programme. 6. Star t the machine Before starting up the machine check that: ■ the appliance is plugged in ■ the water supply taps are turned on ■ the drain hose is correctly and securely positioned ■ the door and the detergent dispenser dra we ...
-
Zanussi FLS 1084 - page 9
9 P0004 C0004 W ASHING 2 KG OF MIXED F ABRICS A T 40°C Suppose you hav e 2 kg of Mixed f abrics to wash. The y are rather delicate fabrics and should not be washed at a high temperature. 1. Load the laundr y Open the door by pulling the catch outward. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close th ...
-
Zanussi FLS 1084 - page 10
10 5. Select the r equir ed pr ogr amme T urn the programme selector dial clockwise to the required programme. 6. Star t the machine Before starting up the machine check that: ■ the appliance is plugged in ■ the water supply taps are turned on ■ the drain hose is correctly and securely positioned ■ the door and the detergent dispenser drawe ...
-
Zanussi FLS 1084 - page 11
11 W ashing Hints i Do NO T overload the machine. W eigh the laundry the first fe w times you use the appliance. The av erage weights of the most common items are listed below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g T ablecloth 400-500 g Serviette 50-100 g T ea to wel 70-120 g Linen hand towel 100-150 g T owelling hand to we ...
-
Zanussi FLS 1084 - page 12
12 W hich deter gent to use?.... For most clothes and household textiles, CONVENTIONAL DETERGENTS will gi v e good washing results. Con ventional detergents are av ailable in either a biological, such as Ariel, or a non-biological form, such as Fairy , and are particularly suitable for whites. Biological detergents pro vide improv ed stain remov al ...
-
Zanussi FLS 1084 - page 13
13 W ash Car e Symbols W ash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the cor rect programme on your washing machine. W ASHING SYMBOL BLEA CHING IR ONING DR Y CLEANING TUMBLE DR Y ...
-
Zanussi FLS 1084 - page 14
14 W ashing Pr ogrammes Degree of soil and type of laundry Description W ash programme Programme dial position Possible options Max. load NON- F AST COLOUREDS F AST COLOUREDS WHITES WITHOUT PREW ASH WHITES WITH PREW ASH QUICK W ASH White cotton, for example hea vy soiled work garments, sheets, household linen, underwear , to wels. Fast coloured cot ...
-
Zanussi FLS 1084 - page 15
15 W ashing Pr ogrammes Degree of soil and type of laundry Description W ash programme Programme dial position SYNTHETICS WITHOUT PREW ASH Possible options SPIN WOOL DELICA TES MIXED F ABRICS Synthetic or mixed fabrics, underwear , coloured garments, non-shrink shirts, blouses. Synthetic or mixed fabrics, underwear , coloured garments, non-shrink s ...
-
Zanussi FLS 1084 - page 16
16 Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply . Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening po wder in the machine. Do this separately from any laundry w ashing, and according to the softening ...
-
Zanussi FLS 1084 - page 17
17 Cleaning the filter The water drain filter A clean filter is important for the correct functioning of the machine, and should therefore be cleaned after ev ery washing programme. Open the filter door and place a container underneath to catch any spillage. If the filter is block ed and the machine is unable to drain you will need to drain the wat ...
-
Zanussi FLS 1084 - page 18
18 Something Not W orking Certain problems are due to lack of simple maintenance or oversights, which can be solv ed easily without calling out an engineer . Before contacting your local Service Force Centre, please carry out the checks listed below . Symptom The machine does not start Possible causes ■ The door has not been closed. ■ The plug ...
-
Zanussi FLS 1084 - page 19
19 If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number . This information can be found on the rating plate (see picture). Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls. In-guarantee customers should ensure that the above ...
-
Zanussi FLS 1084 - page 20
20 Peace of Mind for Twelve Months Zanussi standar d guar antee conditions This guarantee is in addition to your statutory and other legal rights. W e, Zanussi, undertake that if, within 12 months of the date of the purchase, this ZANUSSI appliance or any part thereof is prov ed to be defecti ve by reason only of faulty workmanship or materials, we ...
-
Zanussi FLS 1084 - page 21
21 Installation Instructions T echnical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way . Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or co ...
-
Zanussi FLS 1084 - page 22
22 P0233 2 1 P0255 P0234 P0020 P0256 Unpacking Before starting the machine up, the packing must be remov ed as follo ws. Y ou are advised to keep all the packaging for re-use in case the machine is to be transported again. Using a spanner unscrew and remo ve the rear right bolt. Lay the machine gently on its back, making sure that the hoses are not ...
-
Zanussi FLS 1084 - page 23
23 W ater inlet The inlets on the back of the appliance are colour coded, blue for cold and red for hot. Before connecting the hoses be sure to fit the mesh filters «A» supplied as per diagram. If only a cold water supply is a v ailable, connect the two hoses to a cold water outlet by means of a «Y» connection piece. Installation should comply ...
-
Zanussi FLS 1084 - page 24
24 Important Before connecting up the machine to new pipe work or to pipew ork that has not been used for some time, run of f a reasonable amount of water to flush out any debris that may hav e collected in the pipes. Le v elling Le vel the washing machine by raising or lo wering the feet. The feet may be tight to adjust as they incorporate a self ...
-
Zanussi FLS 1084 - page 25
25 Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EAR THED . The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the sam ...
-
Zanussi FLS 1084 - page 26
Z ...
Avez-vous une question à propos de Zanussi FLS 1084?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Zanussi FLS 1084, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Zanussi FLS 1084 il est probable qu’il a envie de partager la façon de le résoudre.