Français dropdown-ico

Manuel d’utilisation Hearth and Home Technologies Grand-XTS

45 pages 2.53 mb
Télécharger

Aller à la page of 45

Summary
  • Hearth and Home Technologies Grand-XTS - page 1

    1 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 Model(s): Supreme-XTS Grand-XTS • Do not store or use gasoline or other fl am- mable vapors and liquids in the vicinity of this or any other appliance. • What to do if you smell gas - Do not try to light any appliance - Do not touch any electrical switch. Do not use any p ...

  • Hearth and Home Technologies Grand-XTS - page 2

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 2 Congratulations Listing Label Information/Location Model Name: ___________________________________________ Date purchased/installed: __________________ Serial Number: __________________________________________ Location on appliance: ____________________ Dealership purchased fr ...

  • Hearth and Home Technologies Grand-XTS - page 3

    3 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 T able of Contents 1 Listing and Code Approvals A. Appliance Certi fi cation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 B. BTU Speci fi cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 C. High Altitude Installations . . . . . . . . . . . ...

  • Hearth and Home Technologies Grand-XTS - page 4

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 4 Note : T o assure top performance, safety and ef fi ciency , inserts must be installed with an approved fl ue liner as per CAN/CGA B-149 or National Fuel Gas Code ANSI Z223 and these instructions. Not e: This installation must c onform wi th local c odes. In the absenc e of ...

  • Hearth and Home Technologies Grand-XTS - page 5

    5 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 Heat & Glo gas inserts are designed for recessed installa- tions into solid fuel masonry or factory built non-combustible fi replaces that have been installed in accordance with the National, Provincial, State and local building codes. Prior to installing the gas insert: ...

  • Hearth and Home Technologies Grand-XTS - page 6

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 6 T OP VIEW A C B 3 3 F ireplace Size Requirements Figure 3.1 Fireplace Opening Minimum Appliance Size Location Grand-XTS Supreme-XTS Inches Millimeters Inches Millimeters A Front Width 33-1/4 845 29-1/4 743 B Rear Width 24-1/4 616 20-1/4 515 C Depth 13-5/8 346 13-5/8 346 * Heig ...

  • Hearth and Home Technologies Grand-XTS - page 7

    7 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 B. Clearances Figure 3.2 Clearances to Mantels or other Combustibles above Appliance Fire Risk. • Locate and install appliance to all clearance speci fi cations in manual. Fire Risk. Odor Risk. • Clearance to combustible material under the insert is 1/4 inch (0.6 cm). • ...

  • Hearth and Home Technologies Grand-XTS - page 8

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 8 Fire Risk. Asphyxiation Risk. • T erminations MUST meet minimum clearances. • Exhaust gases are hot. • Nearby vents may draw fumes into house. A. V ent T ermination Minimum Clearances Figure 4.1 speci fi es minimum vent heights for various pitched roofs. Roof Pitch H (M ...

  • Hearth and Home Technologies Grand-XTS - page 9

    9 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 CAUTION ALL vent speci fi cations MUST be followed. • This product is tested and listed to these speci fi cations. • Appliance performance will suffer if speci fi cations are not followed. EXHAUST VENT PIPE TERMINA TION CAP ADAPTOR INSULA TION SEAL INLET VENT AIR PIPE F ...

  • Hearth and Home Technologies Grand-XTS - page 10

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 10 6 6 Installation Preparation Fire Risk. A hearth or hearth extension (if present) must comply with either of the following: • The solid fuel burning fi replace manufacturer’s speci fi cation. • Local building codes required by authority having jurisdiction. • NFPA 2 ...

  • Hearth and Home Technologies Grand-XTS - page 11

    11 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 A. V enting Components 7 7 Installing V ent P ipe and Appliance The vertical vent termination system installed on this model includes: • One length of 3-inch fl exible vent pipe for combustion air (included with vent kit). Pipe will be either a 4-foot or 30-foot section de ...

  • Hearth and Home Technologies Grand-XTS - page 12

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 12 Figure 7.2 CUT AND BEND FLASHING AS NEEDED TO FIT CHIMNEY SEALANT ADHESIVE • T rim chimney top plate to minimize excess overhang or bend over fl ue tile (see Figure 7.2). • Place 3/8 inch bead of 300º F silicone on fl ue tile top. C. Placing, Securing and Leveling the ...

  • Hearth and Home Technologies Grand-XTS - page 13

    13 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 D. Installing Adaptor and T ermination Cap For installation of termination cap see minimum vent heights for various pitched roofs (see Figure 7.2) . T o install adaptor see Figure 7.3. Roof Pitch H (Min.) Ft. Flat to 6/12.................... 1.0* Over 6/12 to 7/12 ........1.2 ...

  • Hearth and Home Technologies Grand-XTS - page 14

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 14 • Ensure that gas line does not come in contact with outer wrap of appliance. Follow local codes. • Incoming gas line should be piped into the valve compartment and connected to the 1/2 inch connection on the manual shutoff valve. • Check all fi ttings and connections ...

  • Hearth and Home Technologies Grand-XTS - page 15

    15 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 Fire hazard. Do NOT change the valve settings. • This valve has been preset at the factory . • Changing valve settings may result in fi re hazard or bodily injury . HIGH AL TITUDE INST ALLA TIONS U.L. Listed gas appliances are tested and approved without requiring change ...

  • Hearth and Home Technologies Grand-XTS - page 16

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 16 A. Wiring the Appliance 9 9 Elect rical Infor mation Note : This appliance must be electrically wired and grounded in accordance with local codes or , in the absence of local codes, with National Electric Code ANSI/NFP A 70-latest edition or the Canadian Electric Code, CSA C2 ...

  • Hearth and Home Technologies Grand-XTS - page 17

    17 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 B. Junction Box Installation Figure 9.2 Junction box installation JUNCTION BOX SIDEW ALL JUNCTION BOX ACCESS SCREW PROVIDED Optional Accessories Connecting the electrical junction box is required if using a blower or remote. • Plug the cord into a convenient outlet. • An ...

  • Hearth and Home Technologies Grand-XTS - page 18

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 18 Figure 9.4 Fan/Rheostat Wire Diagram NOTE: IF ANY OF THE ORIGINAL WIRE AS SUPPLIED WITH THE APPLIANCE MUST BE REPLACED, IT MUST BE REPLACED WITH TYPE 105 0 C RA TED WIRE. JUNCTION BOX V ARIABLE SPEED CONTROL TEMPERA TURE SENSOR SWITCH WHT GRN BLK BLK 1 10-120 V AC BLOWER BLOW ...

  • Hearth and Home Technologies Grand-XTS - page 19

    19 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 A. Mantel Projections Figure 10.1 shows the minimum vertical and corresponding maximum horizontal dimensions of appliance mantels or other combustible projections above the top front edge of the appliance, not the surround. 1 0 10 Fin ishing Figure 10 .1 Clearances to Mantels ...

  • Hearth and Home Technologies Grand-XTS - page 20

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 20 Figure 1 1.1 Placement of Embers 1 1 11 Appliance Setup A. Remove Shipping Materials Remove shipping materials from inside or underneath the fi rebox. B. Clean the Appliance Clean/vacuum any sawdust that may have accumulated inside the fi rebox or underneath in the control ...

  • Hearth and Home Technologies Grand-XTS - page 21

    21 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 Log Set Assembly: LOGS-SXT E. Positioning the Logs CAUTION: Logs are fragile! Carefully remove the logs from the packaging. If the gas logs have been factory installed they should not need to be positioned. If the logs have been packaged separately , refer to the following in ...

  • Hearth and Home Technologies Grand-XTS - page 22

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 22 LOG #3 (SRV327-703): Position log #3 by locating its slot over the tab on the right front of the burner . The slot on the right side of log #3 fi ts over the bar grate. LOG #2 (SRV349-702): Position log #2 by locating its slot over the tab on the front left of the burner . T ...

  • Hearth and Home Technologies Grand-XTS - page 23

    23 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 LOG #6 (SRV349-706): Position the "Y" end of log #6 into the cutout on log #4 and its opposite end into the groove on log #2. LOG #5 (SRV327-705): Rest log #5 in the cutouts on both log #1 and log #3 as shown. The front edge of log #1 should be at the top of the hol ...

  • Hearth and Home Technologies Grand-XTS - page 24

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 24 Log Set Assembly: LOGS-GXT 2 2 3 3 6 6 5 5 4 4 1 1 Carefully remove the logs from the packaging. CAUTION: Logs are fragile! 339-935 2/02 LOG #1 (SRV339-701): Place log #1 in the back on the insert. Locate the left end of the log over the center of the pilot and the back side ...

  • Hearth and Home Technologies Grand-XTS - page 25

    25 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 LOG #3 (SRV327-703): Position log #3 by locating its slot over the tab on the right front of the burner . The slot in the right end of log #3 fi ts onto the bar grate. LOG #4 (SRV339-704): Nest log #4 in the smooth cut-out areas on the left side of log #1 and place the left ...

  • Hearth and Home Technologies Grand-XTS - page 26

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 26 LOG #6 (SRV327-705): Rest log #6 in the smooth area just to the left of the knothole in log #1 and on log #3. The front edge of log #1 should be at the top of the hole when looking through the hole in log #6. LOG #7 (SRV571-707): Rest log #7 in the smooth area just to the rig ...

  • Hearth and Home Technologies Grand-XTS - page 27

    27 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 Figure 1 1.5 Glass Assembly F . Glass Assembly G. Air Shutter Setting Optimal fl ame appearance is dependent on the air shutter setting. Adjustments should be made by a qualified technician. Handle glass doors with care. • Inspect the gasket to ensure it is undamaged. • ...

  • Hearth and Home Technologies Grand-XTS - page 28

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 28 Fire Risk. Explosion Risk. Gas may build up while lighting pilot. • Remove glass assembly before lighting pilot. • Replace glass assembly after lighting pilot. A. Before Lighting Appliance This appliance has a Standing Pilot Ignition. Before operating this appliance have ...

  • Hearth and Home Technologies Grand-XTS - page 29

    29 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 B. Lighting Appliance Standing Pilot Ignition 1. T urn off all electric power to the appliance if service is to be performed. 2. Open control access panel. 3. Move switch to “OFF” position. 4. Push in gas control knob slightly and turn clock- wise to OFF”. Do not force. ...

  • Hearth and Home Technologies Grand-XTS - page 30

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 30 C. Check Pilot Flame Appearance Pilot fl ame must contact the thermocouple and thermopile for reliable appliance operation. • Pilot fl ame should be as shown in Figure 12.1. D. After Appliance is Lit Initial Break-in Procedure When you light the appliance, you may notice ...

  • Hearth and Home Technologies Grand-XTS - page 31

    31 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 E. Frequently Asked Questions Fire Risk. High T emperatures. Keep combustible household items away from appliance. Do NOT obstruct combustion and ventilation air . • Do NOT place combustible items on top of or in front of appliance. • Keep furniture, draperies away from a ...

  • Hearth and Home Technologies Grand-XTS - page 32

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 32 A. Standing Pilot Ignition System 1 3 13 T roubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a quali fi ed service person i ...

  • Hearth and Home Technologies Grand-XTS - page 33

    33 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 T roubleshooting (continued) Symptom Possible Cause Corrective Action 3. Continued c. Defective valve. T urn the valve knob to the ON position. Place the ON/OFF switch in the ON position. Check the millivolt meter a the thermopile terminals. The millivolt meter should read gr ...

  • Hearth and Home Technologies Grand-XTS - page 34

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 34 1 4 14 Maintaining and Ser vicing Appliance Although the frequency of appliance servicing and maintenance will depend on use and the type of installation, a quali fi ed service technician should perform an appliance checkup at the beginning of each heating season. Annual ins ...

  • Hearth and Home Technologies Grand-XTS - page 35

    35 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 Inspect Maintenance T asks Doors, Surrounds and Fronts 1. Assess condition of screen and replace as necessary . Recommend addition of screen if one is not present. 2. Inspect for scratches, dents or other damage and repair as necessary . 3. V erify no obstructions to air fl ...

  • Hearth and Home Technologies Grand-XTS - page 36

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 36 Figure 15.1 Appliance Dimensions 1 5 15 Reference Materials A. Appliance Dimension Diagram Dimensions are actual appliance dimensions. Use for reference only. Fo r framing dimensions and clearances refer to Section 3. A C B ELECTRICAL ACCESS GAS INLET D E F G H I L N K J M O ...

  • Hearth and Home Technologies Grand-XTS - page 37

    37 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 B. V ent Kits Components Direct V ent Flex Liner Kits (see Figure 15.2) LINK-DV -30B or (LINK-DV -30) : Masonry 3 inch fl ex liner kit. Expands to 30 feet. Includes: two liners, termination cap, fl ashing, and link adapter . LINK-DV4-30B or (LINK-DV4-30) : Masonry 3 inch ? ...

  • Hearth and Home Technologies Grand-XTS - page 38

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 38 Service Parts Diagram C. Service Parts SUPREME-XTS Beginning Manufacturing Date: Aug. 2007 Ending Manufacturing Date: ______ Part number list on following page. Log Set Assembly 1 2 3 4 5 6 8 7 19 18 17 16 15 14 13 12 11 10 9 ...

  • Hearth and Home Technologies Grand-XTS - page 39

    39 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 Service Parts Diagram SUPREME-XTS Service Parts IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . ...

  • Hearth and Home Technologies Grand-XTS - page 40

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 40 Service Parts Diagram GRAND-XTS Beginning Manufacturing Date: Aug. 2007 Ending Manufacturing Date: ______ Service Parts Part number list on following page. Log Set Assembly 1 2 3 7 6 4 5 8 20 19 18 17 16 15 14 13 12 11 10 9 ...

  • Hearth and Home Technologies Grand-XTS - page 41

    41 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 Service Parts Service Parts Diagram GRAND-XTS IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . S ...

  • Hearth and Home Technologies Grand-XTS - page 42

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 42 Service Parts Service Parts Diagram SUPREME-XTS, GRAND-XTS Beginning Manufacturing Date: Aug. 2007 Ending Manufacturing Date: ______ IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and seria ...

  • Hearth and Home Technologies Grand-XTS - page 43

    43 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 D. Limited Lifetime W arranty Hearth & Home T echnologies LIMITED W ARRANTY Hearth & Home T echnologies (“HHT”) and its respective brands extends the following warranty for HHT gas, wood, pellet and electric appliances purchased from an authorized HHT dealer and i ...

  • Hearth and Home Technologies Grand-XTS - page 44

    Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 44 D. Limited Lifetime W arranty (continued) • This limited warranty does not extend to or include surface fi nish on the appliance or terminations, door gasketing, glass gasketing, glass discoloration, fi rebrick, pellet logs, kaowool or other ceramic insulating materials. ...

  • Hearth and Home Technologies Grand-XTS - page 45

    45 Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev . G • 9/08 E. Contact Information - NOTES - ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ...

Fabricant Hearth and Home Technologies Catégorie Indoor Fireplace

Les documents que nous recevons du fabricant de l'appareilHearth and Home Technologies Grand-XTS peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Hearth and Home Technologies
- manuels d’utilisations Grand-XTS
- fiches produit Hearth and Home Technologies
- dépliants
- ou étiquettes-énergie Hearth and Home Technologies Grand-XTS
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Hearth and Home Technologies Grand-XTS.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Hearth and Home Technologies Grand-XTS, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Hearth and Home Technologies Grand-XTS. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Hearth and Home Technologies Grand-XTS.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Hearth and Home Technologies Grand-XTS, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Hearth and Home Technologies Grand-XTS par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Hearth and Home Technologies Grand-XTS.

Le manuel d’utilisation complet Hearth and Home Technologies, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Hearth and Home Technologies Grand-XTS - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Hearth and Home Technologies Grand-XTS, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lHearth and Home Technologies Grand-XTS qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Hearth and Home Technologies Grand-XTS - qui devraient nous aider dans les premières étapes lors de l'utilisation Hearth and Home Technologies Grand-XTS
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Hearth and Home Technologies Grand-XTS
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Hearth and Home Technologies Grand-XTS dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Hearth and Home Technologies Grand-XTS?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Hearth and Home Technologies Grand-XTS, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Hearth and Home Technologies Grand-XTS il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)