-
GarrettCom 84-00136 - page 1
i www Garre t t C om c om .. www Garre t t C om c om .. Corporate Headquarters GarrettCom, Inc. 47823 Westinghouse Dr. Fremont, CA 94539-7437 Phone (510) 438-9071 Fax (510) 438-9072 Website: http ://www.GarrettCom .com email support@garrettc om.com Magnum 6K16-Series Managed Fiber Switch Hardware Installation and User Guide Ma g num 6K16V m ounted ...
-
GarrettCom 84-00136 - page 2
Magnum 6K16-Series Managed Fiber Switch Installation & User Guide (04/06) i www Garre t t C om c om .. Magnum 6K16-Series Managed Fiber Switch Hardware Installation and User Guide Part #: 84-00136 (Rev. B) Trademarks Ethernet is a trademark of Xerox Corporation NEBS is a trademark of Telcordia Technologies UL is a registered trademark of Un ...
-
GarrettCom 84-00136 - page 3
Magnum 6K16-Series Managed Fiber Switch Installation & User Guide (04/06) ii www Garre t t C om c om .. Contacting GarrettCom, Inc Please use the mailing address, phone and fax numbers and email address listed below: GarrettCom, Inc. 47823 Westinghouse Dr. Fremont, CA 94539-7437 Phone (510) 438-9071 Fax (510) 438-9072 Website: http ://www.Garre ...
-
GarrettCom 84-00136 - page 4
Magnum 6K16-Series Managed Fiber Switch Installation & User Guide (04/06) iii www Garre t t C om c om .. Table of Contents .............................................................................. Page 1.0 SPECIFICATIONS ............................................................................... 1 1.1 Technical Speci fications ........ ...
-
GarrettCom 84-00136 - page 5
Magnum 6K16-Series Managed Fiber Switch Installation & User Guide (04/06) iv www Garre t t C om c om .. 4.0 OPERATION ....................................................................................... 40 4.1 Switching Func tionality ..................................................................... 40 4.2 Status LEDs ................... ...
-
GarrettCom 84-00136 - page 6
Magnum 6K16-Series Managed Fiber Switch Installation & User Guide (04/06) v www Garre t t C om c om .. Revisions 04/06: minor updates as PoE m odules option added on Sec 5.2.10/11 10/05: minor updates as MDIX support added on all RJ -45 port modules 02/05: minor updates and tweaks on LC port m odule 07/04 : 6K16 carrier class managed switc h ha ...
-
GarrettCom 84-00136 - page 7
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide 04/06) www Garre t t C om c om .. THE MAGNUM LINE Ethernet connect ivity products "Designed and Manufactured i n the USA" Overview GARRETTCOM, INC. OFFERS THE PREMIUM-QUALITY MAGNUM LINE OF ETHERNET LAN CONNECTIVITY PRODUCTS WITH INDUSTRY-STANDARD FUNCTIONAL ITY AND B ...
-
GarrettCom 84-00136 - page 8
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide 04/06) www Garre t t C om c om .. 8 OR 9-PORT AND 4 OR 5-PORT PE RSONAL HUBS, W/ MAN. UP-LINK SW . MEDIA CONVERTERS, 10MB AND 100MB SERIES ALL MEDIA COMBINATIONS, INCL . FIBER ST, SC, MM., S INGLE MODE THE “X-LINE” OF CONFIGURABLE MIX ED MEDIA PRODUCTS: STACKABLE CONCENTRATORS, ...
-
GarrettCom 84-00136 - page 9
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 1 www Garre t t C om c om .. 1.0 SPECIFICATIONS 1.1 Technical Specifications Performance Filtering / Forwarding Rate: Ethernet(10Mb):14,880 pps Fast Ethernet(100Mb): 148,800 pps Gigabit Ethernet(1000Mb): 1, 488,000 pps Switching Processing Type: Store and Forward w ith IEEE ...
-
GarrettCom 84-00136 - page 10
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 2 www Garre t t C om c om .. Fiber Single-mode conn ector types: Fiber Port, SC-type: Fiber optic single-mode, 100BASE-FX Fiber Port, LC-type Fiber SFF single-mode, 100BASE-FX Fiber Port, 1000BASE-FX, GBIC modules LEDs: Per Port (one set at the port, one set on rear top) 6K ...
-
GarrettCom 84-00136 - page 11
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 3 www Garre t t C om c om .. For DC internal power supplie s at –48VDC, 24VDC and 125VDC, including Dual Source options ( for continuity of operation when either of the DC input sources are interrupted) , see Appendices B and C. Per-port MDI or MDIX on RJ-45 The copper da ...
-
GarrettCom 84-00136 - page 12
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 4 www Garre t t C om c om .. 1.2 Ordering Information Magnum Managed Fiber Switch (16 ports max) MODEL DESCRIPTION Magnum 6K16V -Magnum 6K16V Managed Fiber Sw itch, base unit for vertical mounting. Worldwide AC power. May be c onfigured with a selection of 10/100/1000 fiber ...
-
GarrettCom 84-00136 - page 13
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 5 www Garre t t C om c om .. fiber ports connector GBPMV-2OTX Two-port Gigabit 6K module for 6K 16-Series Switches, provides two GBIC open transceiver port for a use r-selectable GBIC transceiver module GBPMV-COTX One slot Gigabit 6K module for 6K 16-Series Switches, uses o ...
-
GarrettCom 84-00136 - page 14
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 6 www Garre t t C om c om .. Gigabit (1000Mb) module option for Magnum 6K16V 6KP5-G4RJ “G+2” module, w/one GBIC transceiver and four 10/100 RJ-45 connectors 6KP3-G2SC “G+2” module, w/one GBIC tran sceiver and two 100Mb 2km FX SC fiber ports connector GBPM-2OTX Two-p ...
-
GarrettCom 84-00136 - page 15
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 7 www Garre t t C om c om .. 6K PoE Modules with 48VDC Pass-Through Configuration options: only one A, B or C module slot of 6K-S eries switch with 48VDC power input may be configured with a PoE Module s New P6KP8-RJ45 8 port PoE module for 6ks with 48vdc PS, w/eight PoE po ...
-
GarrettCom 84-00136 - page 16
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 8 www Garre t t C om c om .. 2.0 Introduction 2.1 Inspecting the Package and Product Examine the shipping container for obvious damage prior to installing this product; notify the carrier of any damage that you believe occurred during shipment or delivery. Inspect the conte ...
-
GarrettCom 84-00136 - page 17
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 9 www Garre t t C om c om .. 2.2 Product Description - M agnum 6K16-Series (6K16/6K16V) M agnum 6K16-Series Managed Switches, available as Magnum 6K16 and 6K16V models, and equipped w ith 16 modular ports, is specially designed to focus on two different aspects of Ether ...
-
GarrettCom 84-00136 - page 18
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 10 www Garre t t C om c om .. Security with control via Web and command line interface (CLI). For high availability LANs using ring topologies, Spanning Tree Protocol, Link-Loss-Learn and S-Ring are available. See the Managed Networks So ftware (MNS-6K) and S-Ring dat ...
-
GarrettCom 84-00136 - page 19
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 11 www Garre t t C om c om .. choice of popular DC options or industry standard AC internal input. The plug-n-play Magnum 6K16V managed fiber switch, should be mounted vertically using the vertical mounting brackets which come with the unit or by using the DIN- RAIL-KIT (op ...
-
GarrettCom 84-00136 - page 20
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 12 www Garre t t C om c om .. requirement of this space. Magnum 6K mana gement features not only allow the easy monitoring of the switch through SNMP, but also protect the network through its security features of port-security, SNMP3, VLAN et c. The redundant feature throug ...
-
GarrettCom 84-00136 - page 21
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 13 www Garre t t C om c om .. Media Copper & Fiber Same Port Module can be 10,100 or 1000Mb Same Suitable for Applic ati ons Telco, Offic e, Industrial Utility,Industrial,Outdoors Operation Plug-n-Play Same MDI/MDIX on RJ-45 Yes Same Note- The Redundant S-Ring feature f ...
-
GarrettCom 84-00136 - page 22
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 14 www Garre t t C om c om .. HDX type of Fast Et hernet devices). There are three LED’s per fiber port. The Link (LK) LED indicates “ ready for operation” on that port when lit, the F/H LE D indicates operation in full-duplex mode when ON (half-duplex when OFF), and ...
-
GarrettCom 84-00136 - page 23
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 15 www Garre t t C om c om .. or 100Mb speed and full- or half-duplex m ode per-port as per user requirement. (See Magnum MNS-6K Software Manual for details info.). 2.2.4 New PoE(Power Pass-through), model P6KP8-RJ45 (MDIX), 10/100Mb 8- port The PoE (Power-pass-through) RJ- ...
-
GarrettCom 84-00136 - page 24
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 16 www Garre t t C om c om .. The four RJ-45 ports operate just like the 8-port copper module with auto-cross (MDIX) feature to eliminate the us e of cro ss-over cable, and the two fiber ports operate at 100Mbps full-duplex (default) . User mode control per port through the ...
-
GarrettCom 84-00136 - page 25
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 17 www Garre t t C om c om .. 2.2.7 Gigabit (1000Mbps) port modules The Magnum 6K16-Series offered a wide option Gigabit speed with multiple choice for the modular slot. While up to two Gigabit modules (maxm.) can be configured in the modular slot. The Gigabit port option f ...
-
GarrettCom 84-00136 - page 26
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 18 www Garre t t C om c om .. standard and fulfills its role in support of QOS, giving packet processing priority to priority tagged packets according to the 802.1p standard. In addition to hardware support for QOS, the MNS software (R2) supports two priority queues that ca ...
-
GarrettCom 84-00136 - page 27
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 19 www Garre t t C om c om .. 2.2.10 Managed Network Software ( MNS-6K ) for Magnum 6K8-Series Magnum 6K8-Series’s come with license d MNS-6K Firmware (Rel 3.2), which allows to configure the Magnum 6Ks as a Managed Switch and othe r Software enabled features. For additio ...
-
GarrettCom 84-00136 - page 28
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 20 www Garre t t C om c om .. 2.3 Features and Benefits Managed switching for high performance Ethernet LANs Magnum 6K16-Series Switches provide non-bloc king (all ports can run at full speed at once) performance with standard Managed Networks Software (MNS-6K) included ...
-
GarrettCom 84-00136 - page 29
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 21 www Garre t t C om c om .. 2.4 Applications Magnum 6K16-Series Fiber Switches o ffer high performance, modularity and availability. They provide the flexibility of 100Mbps fiber and copper ports as well as single or dual Gigabit(1000Mb) ports, with industry-standard LAN ...
-
GarrettCom 84-00136 - page 30
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 22 www Garre t t C om c om .. The option for setting the ports at 10 or 100Mb on copper, and supporting the 10 or 100Mb fiber media, provide a very wide spread option to the users to mix match their legacy and advance network needs. The modularity of the 6K16-Series Managed ...
-
GarrettCom 84-00136 - page 31
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 23 www Garre t t C om c om .. running in mili-seconds . The ring topology of the network consists of high speed LAN segments supported by 100Mbps full-duplex future-proof fiber media to provide secure long distance LAN connection. The entire network is sharing a higher band ...
-
GarrettCom 84-00136 - page 32
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 24 www Garre t t C om c om .. Example 3. In another application, in a Telco environment, 12 port Nebs compliant, -48VDC operated m anaged switch is required to meet the fiber and copper connection to store the sensitive da tas. The switch must be snm p enabled and managed t ...
-
GarrettCom 84-00136 - page 33
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 25 www Garre t t C om c om .. 3.0 Installation Before installing the equipment, it is necessary to take the following precautions: 1.) If the equipment is mounted in an enclosed or multiple rack assembly, the environmental temperature around the equipment must be less than ...
-
GarrettCom 84-00136 - page 34
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 26 www Garre t t C om c om .. IEEE Standard Media Type Max. Dis tance Port Modu le Fiber: 100BASE-FX m m 1 Fiber 220m ( ft) GBIC-SXSC sgl.m 2 Fiber 5Km GBIC-LXSC 100BASE-FX m m 1 Fiber 2.0km (6,562 ft) 6K6-MSC, -MST sgl.m 2 Fiber 18.0km (95K ft) SSC, SSCL small form factor ...
-
GarrettCom 84-00136 - page 35
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 27 www Garre t t C om c om .. (9/125 microns for single-mode, 50/125 or 62.5/125 microns for multi-mode where xx/xx are the diameters of the core and the core plus the cladding respectively). Single-mode fiber allows full bandwidth at longer distan ces, and may be used to c ...
-
GarrettCom 84-00136 - page 36
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 28 www Garre t t C om c om .. NOTE : It is recommended that high quality CAT. 5E cables (which work for both 100 Mb and 1000Mb) be used whenever possible in order to provide flexibility in a mixed-speed network. The following procedure describes how to connect a 1000BASE-T ...
-
GarrettCom 84-00136 - page 37
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 29 www Garre t t C om c om .. the top when the 6K16V is installed on a DIN Rail. To install the 6K16V with the DIN-Rail brackets and latches attached to it, hold the 6K16V in the vertical position with the bo ttom out, and with the top moved in toward the DIN-Rail. Position ...
-
GarrettCom 84-00136 - page 38
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 30 www Garre t t C om c om .. The DIN-Rail mounting brackets and latches are optional and need to be ordered as separate items, e.g Model # DIN-RAIL-VRM 3.3.1 Mounting Dimensions for 6K16Vwith metal brackets Each Mangum 6K16V is supp lied with metal mounting brackets and sc ...
-
GarrettCom 84-00136 - page 39
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 31 www Garre t t C om c om .. 3.3.2 Rack-mounting options (Magnum 6K16) for Telco and ET SI Standard Magnum 6K16, a carrier class focused managed switch can be mounted as rack-mount usi ng the following kit options offered for this product – K16-RMB Set of two rack-mount ...
-
GarrettCom 84-00136 - page 40
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 32 www Garre t t C om c om .. 3.4 Powering the Magnum 6K16- Series Managed Fiber Switch The Magnum 6K16-Series Switches incor porate an internal universal power supply and have a recessed male IEC connector for the AC power cord at the left-rear. A manual power ON-OFF switc ...
-
GarrettCom 84-00136 - page 41
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 33 www Garre t t C om c om .. failure of the power supply inside of th e Magnum 6K16 Switch. Useful info. about Alarm contacts: 1. There is four terminal block (1,2,3 ,4)provided next to AC/DC power supply 2. The top two pins (1,2) are software operated 3. The bottom two pi ...
-
GarrettCom 84-00136 - page 42
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 34 www Garre t t C om c om .. contains (Daughterboard (Bigger) and Gr anddaughter board (smaller), three 5/8 stand offs for Granddaughter board, 6 st andoff for daughter Board, nine #4-40 Pan-Head screws along with Front pane l face plate package. The Front panel faceplate ...
-
GarrettCom 84-00136 - page 43
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 35 www Garre t t C om c om .. When the chassis top cover has been re m oved, the interior of the unit is exposed. Looking down into the Magnum 6K16-Se ries unit, notice that there are individual PM installation spaces and female latch (white) connectors provided on the main ...
-
GarrettCom 84-00136 - page 44
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 36 www Garre t t C om c om .. screw down tightly with the three 5/16 stand-off (male) on the top of the Granddaughter board The 5/16 stand off has been used to place the daughter board on the top of the granddaughter board and latch it securely. Step 3. The figure here illu ...
-
GarrettCom 84-00136 - page 45
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 37 www Garre t t C om c om .. Step 5. Once the latching connectors are aligned properly and the mounting holes are aligned with stand offs then press slowly and firmly with two fingers (as shown below in Fig. 3.6.2f) on the top of the latching connectors until the connector ...
-
GarrettCom 84-00136 - page 46
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 38 www Garre t t C om c om .. installed inside of the top cover. Step 8. Once all 6KP M cards have been installed (including faceplates for empty slots), the chassis cover should be repl aced. Make sure the chassis cover is aligned properly before securing the enclosure. 3. ...
-
GarrettCom 84-00136 - page 47
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 39 www Garre t t C om c om .. 3.7 Connecting a Management Console Terminal to Magnum 6K16- Series Use a DB-9 “null modem” cable (use on any serial port)or “one DB-9 and one USB” ( USB port on the laptop) null modem cable to connect the Magnum6K16-Series Console Port ...
-
GarrettCom 84-00136 - page 48
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 40 www Garre t t C om c om .. 4.0 OPERATION This chapter describes the functions and operation of the Magnum 6K16-Series Switch. 4.1 Switching Functionality A Magnum 6K16-Series provides switched c onnectivity at Ethernet wire-speed among all of its ports. Th e Magnum 6K16- ...
-
GarrettCom 84-00136 - page 49
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 41 www Garre t t C om c om .. 4.2 Status LEDs For Magnum 6K16-Series models (6K16/6K16V) : PWR : Power LED, O N when external power is applied to the unit. LK : Steady ON, Link status for 10 Mbps and 100Mbps operation. ACT : ON with port activity for 10 Mbps and 100Mbps ope ...
-
GarrettCom 84-00136 - page 50
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 42 www Garre t t C om c om .. 6K16-Series Switch’s RJ-45 ports handle this situation by configuring the ports as per desire through MNS software port settings a nd can check the port status of each port after the change. When Magnum 6K16-Series RJ-45 copper ports are set ...
-
GarrettCom 84-00136 - page 51
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 43 www Garre t t C om c om .. 4.5 Flow-control, IEEE 802.3x standard Magnum 6K16-Series Switches incorpor ate a flow-control mechanism for Full-Duplex mode. The purpose of flow-control is to reduce the risk of data loss if a long burst of activity causes the switch to save ...
-
GarrettCom 84-00136 - page 52
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 44 www Garre t t C om c om .. The following data has been collected from component manufacturer’s (Agilent’s and Lucent’) web sites and catalogs to provide gui dance to network designers and installers. Fiber Port Module Speed, Std. Mode Std. km fdx (hdx) Wave - lengt ...
-
GarrettCom 84-00136 - page 53
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 45 www Garre t t C om c om .. 5.0 Introduction - Magnum 6K16/6K 16V Managed Fiber Switch Port Modules This chapter describes each Port Module (PM), including appearance, functionality, and status displays. 5.1 Inspecting the Package and Product This section applies only to ...
-
GarrettCom 84-00136 - page 54
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 46 www Garre t t C om c om .. 5.2.1 6KP6-RJMST, 4@10/100Mbps RJ-45 and 2@100Mb multi-mode FX-ST “twist lock” Combo Module The Magnum 6KP6-RJMST is a co mbo 6 port module of RJ-45’s at 10/100Mbps and fiber optic ports at 100MB. The Combo module is equipped with dual- m ...
-
GarrettCom 84-00136 - page 55
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 47 www Garre t t C om c om .. 6KP4-RJ10MST, 4 Port@ 10Mb ST Fiber Port 2 6 T LK RX ACT F/H TX RX LK ACT F/H TX RX LK ACT F/H TX RX LK ACT F/H 1 5 3 2 1 FULL/HALF 1 ACTIVITY LINK 2 3 6KP4-RJ10MST, 4 Port@ 10Mb ST Fiber Port 2 6 T LK RX ACT F/H TX RX LK ACT F/H TX RX LK ACT F ...
-
GarrettCom 84-00136 - page 56
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 48 www Garre t t C om c om .. network to the Magnum 6K16-Seri es switch. They also provide a convenient way for the half duplex hub to connect to the switch through 10Mb fiber ports. Whereas the 100Mb ST fiber module, allow to connect the 100Mb demand of Switch devices. It ...
-
GarrettCom 84-00136 - page 57
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 49 www Garre t t C om c om .. module of the 6K16-Series Switch supporting four Copper and two single-mode fiber network segments. The 6KP6-RJSSC, when installed in a Magnum 6K16-Series Switch operates on copper at the 100m distance. The Fiber is single-mode and cable length ...
-
GarrettCom 84-00136 - page 58
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 50 www Garre t t C om c om .. to connect the legacy network of 10Mb requirement in the network. Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED indicating proper connectivity with the remote devi ce when lit, and a FDX/HDX LED indicati ...
-
GarrettCom 84-00136 - page 59
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 51 www Garre t t C om c om .. i.e., typically 2km at full-duplex and 412m at half-duplex. The 10Mb Multi-mode ST- Fiber connector supports the standard fiber optic distance limit of 2Km at Full and Half- duplex both. The functionality of this 100BASE- FX multi-m ode 4 port ...
-
GarrettCom 84-00136 - page 60
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 52 www Garre t t C om c om .. one housing that cannot be improperly insert ed. Each port has an Activity (ACT) LED indicating packets being received, a Link (L K) LED indicating proper connectivity with the remote device when lit, and a FDX/HDX LED indicating full-duplex mo ...
-
GarrettCom 84-00136 - page 61
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 53 www Garre t t C om c om .. shielded twisted pair (STP) cable connections. The 6KP8-R J45 module is equipped with a Media Dependent Auto-Crossover (MDI-X) switch, which controls all ports for cascaded connection. This feature eliminates th e need for a special twisted pai ...
-
GarrettCom 84-00136 - page 62
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 54 www Garre t t C om c om .. 4 3 2 4 6 LK 2 ACT F/H ACT F/H 6KP8V - 6KP8-45-2MT 6 Port @ 10/10Mb p s & 2 port @100Mb Multi -Mode Fiber port 1 3 5 10/10 L 1 F/H AC 4 FULL/HALF 1 ACTIVITY LINK 2 3 10/100 10/100 F/H port. For non-PoE devices connected, the PoE port ...
-
GarrettCom 84-00136 - page 63
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 55 www Garre t t C om c om .. When installed in a Magnum 6K16-Series Switc h, it supports the standard distances as mentioned on 5.2.4. and the LEDs also act similarly. 5.2.13 GBIC-SXSC Gigabit fiber(1000Mb), multi-mode SC Connector The Magnum GBIC-SXSC is a multi-mode Giga ...
-
GarrettCom 84-00136 - page 64
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 56 www Garre t t C om c om .. 1@ 1000Mb Fiber SC + 2@ 100Mb SC The two Giga port has been offered as GBPM -2OTX (fiber or RJ-45), whereas the single Gigabit module comes in flavor of G+4(10/ 100 RJ-45 ports) or G+2 (100Mb fiber ports) as shown below in the above figure. Eac ...
-
GarrettCom 84-00136 - page 65
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 57 www Garre t t C om c om .. 6.0 TROUBLESHOOTING All Magnum Ethernet products are designed to provide reliability and consistently high performance in all network environments . The installation of a Magnum 6K16-Series Switch is a straightforward procedure (see INSTALLATIO ...
-
GarrettCom 84-00136 - page 66
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 58 www Garre t t C om c om .. 6.2 When Calling for Assistance Please be prepared to provide the following information. 1. A complete description of the problem, including the following points: a. The nature and duration of the problem; b. Situations when the problem occurs; ...
-
GarrettCom 84-00136 - page 67
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 59 www Garre t t C om c om .. GarrettCom will carefully test and evaluate all returned products, will repair products that are under warranty at no charge, and w ill return the warranty-repaired units to the sender with shipping charges prepaid (see Warranty Information, Ap ...
-
GarrettCom 84-00136 - page 68
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 60 www Garre t t C om c om .. B1.0 SPECIFICATIONS FOR MAG NUM 6K16-SERIES SWITCHES, DC POWER Magnum 6K16-Series models, for –48V and 24V DC & 125VDC and 5V Power input Each Magnum Model 6K16-Series Managed Switch (DC option) requires a DC power source, for 24VDC, -48V ...
-
GarrettCom 84-00136 - page 69
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 61 www Garre t t C om c om .. incorrect polarity connection, for example, w ill neither affect the Switch, its internal power supply, nor will it blow the fuse in the internal power supply. The manual power “On-Off” Switch (opti onal) is used for powering the unit on an ...
-
GarrettCom 84-00136 - page 70
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 62 www Garre t t C om c om .. Note: The GND should be hooked up first. Th e 6K16-Series unit has a floating ground, so the user may elect to G round either + or = terminal to s uit the customer’s use. Before connecting hot lin es to the Terminal Bl ock of –48VDC, 24VDC ...
-
GarrettCom 84-00136 - page 71
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 63 www Garre t t C om c om .. Power Supply (Internal, -48VDC Dual -Source, model # Dual-Src-48V) DC Power Connector: First Source: “A+”, “A -“ , 2nd Source “B - “, “B+” GND: Terminal for “earth” or ground wire connection to the hub chassis Input: Two sep ...
-
GarrettCom 84-00136 - page 72
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 64 www Garre t t C om c om .. its power from the DC source with the highest voltage at a given tim e. b) The Switch unit will not allow power to flow from a higher voltage input to a lower voltage input, i.e. the two DC power sources are not m ixed together by the hub. c) W ...
-
GarrettCom 84-00136 - page 73
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 65 www Garre t t C om c om .. C5.1 UL Requirements The following must be adhered to in or der to conform to UL requirements: 1. Minimum 18 AWG cable for connecti on to a Centralized DC power source. 2. Minimum 14 AWG cable for connection to earthing wiring. 3. Us e only wit ...
Avez-vous une question à propos de GarrettCom 84-00136?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec GarrettCom 84-00136, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec GarrettCom 84-00136 il est probable qu’il a envie de partager la façon de le résoudre.