Français dropdown-ico

Manuel d’utilisation Hitachi CL42PD2100

46 pages Non applicable
Télécharger

Aller à la page of 46

Summary
  • Hitachi CL42PD2100 - page 1

    Users Guide CL32PD2100 CL37PD2100 CL42PD2100 SCREEN X832136-02-02.qxd 11/19/01 10:44 AM Page 1 ...

  • Hitachi CL42PD2100 - page 2

    Sof tware Notice It is prohibited for the end user of this product to copy , reverse engineer or reverse compile the sof tware included therein, save to the extent permitted by law . Caution T o prevent scratching or damaging the plasma screen face, do not knock or rub the surface with sharp or hard objects. Clean the screen with a sof t cloth mois ...

  • Hitachi CL42PD2100 - page 3

    contents contents safety aspects television safety ................................................................................4 battery safety and installation ............................................................6 rear sock et and scart details. ..............................................................7 set-up plasma screen, A VC ...

  • Hitachi CL42PD2100 - page 4

    DO NOT remove any fixed cover as this may expose dangerous voltages. DO NOT position the plasma screen on top of the A VC unit as it could cause damage to the unit. 4 television safety safety aspects This plasma television has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be take ...

  • Hitachi CL42PD2100 - page 5

    DO NOT cut off the fitted mains plug as it may contain a special radio interference filter , the removal of which could lead to impaired performance. If you wish to extend the lead, obtain an appropriate extension lead or consult your dealer . DO NOT leave equipment switched on when it is unattended unless it is specifically stated that it is desig ...

  • Hitachi CL42PD2100 - page 6

    6 always battery safety and installation safety aspects 1. When inserting the batteries mak e sure the polarities are correct, that is, ‘+’ to ‘+’, ‘-’ to ‘-’. 2. Replace the batteries with the equivalent ‘ AA ’ type. 3. Discard old batteries safely , following the battery safety guidelines. batter y installation 1 2 Remove cove ...

  • Hitachi CL42PD2100 - page 7

    7 rear sock et and scart details Use this sock et to connect ordinary VHS, S- VHS or Hi8 equipment to your TV . (Connect VCR to A V1 for Viewlink). Use this to connect digital video broadcasting equipment and home entertainment systems to your TV . This should be permanently connected to an RF source - i.e your aerial antenna. AV2 scart input AV1 s ...

  • Hitachi CL42PD2100 - page 8

    8 plasma screen, A VC unit and equipment connection set-up TV Setup AUX VCR TV IN OUT IN OUT IN OUT AV1/TV AV2/ DECODER IN OUT 4 5 RF LEADS (1 SUPPLIED) SCART LEADS * (optional) DVD PL A YER/GAMES VCR DIGIBOX AERIAL * Scart leads should be fitted between your TV and other equipment to enhance your picture and sound quality . Scart leads are essenti ...

  • Hitachi CL42PD2100 - page 9

    9 plasma screen, A VC unit and equipment connection set-up U.K. ONLY U.K. ONLY EUROPE 6 Connect aerial connection lead to the Digibox ‘in ’ sock et mark ed . 4 Connect Digibox ‘out’ to VCR ‘in ’ sock et mark ed . Connect VCR ‘out’ to TV ‘in’ socket mark ed . 5 6 VHS video equipment should be connected to the A V1 scart socket lo ...

  • Hitachi CL42PD2100 - page 10

    10 front control panel details This will be green when your TV is on and red when in standby mode. This is for reading commands sent from your remote control handset. (Underside of plasma screen). Use this to switch the plasma screen on and off. (When switched off using this button the screen consumes no power - unlik e when in standby mode). These ...

  • Hitachi CL42PD2100 - page 11

    11 Press this button to leave the menu you are on and return to normal TV operation. This button is used to enter the main menu. This is where your TV ’s features options are displayed. Use this button to move the menu selection box right. Use this button to move the menu selection box lef t. Use this button to move the menu selection box down. c ...

  • Hitachi CL42PD2100 - page 12

    12 Use this button to display the current time on screen. time Used to switch your TV in and out of standby mode. standby Used to increase ‘+’ or decrease ‘-’ your TV ’s volume. volume controls Used to select a signal source for external equipment. AV select This button allows you to switch the TV ’s sound on and off. sound mute Press t ...

  • Hitachi CL42PD2100 - page 13

    13 T elete xt functions handset controls (red, green, yellow, blue) On certain pages in teletext, these will have coded instructions i.e. a shortcut to a teletext page or title. colours Restores TV picture whilst the TV is l ooking for the entered T eletext page. Use this to access a subtitle ser vice directly rather than through a teletext ser vic ...

  • Hitachi CL42PD2100 - page 14

    14 TV set-up and automatic tuning procedure tuning in impor tant note on VCR and satellite Do not switch your TV on until all external equipment is connected. If you have a Video Cassette Recorder or a Satellite receiver connected to this TV please ensure that they are switched on before automatic tuning begins. In the case of a VCR, if it is not V ...

  • Hitachi CL42PD2100 - page 15

    15 Y our TV will now search through the frequencies, storing them in order . 7 The next screen viewed will ask you to insert your aerial connection lead. If you are satisfied all external equipment has been connected, press the OK button on your handset and AUTOTUNE will begin. 4 Once highlighted, accept selection. 3 Once the country of choice is v ...

  • Hitachi CL42PD2100 - page 16

    16 Press the MENU button. The MAIN MENU appears. Press the cursor DOWN button to select INST ALL. Once highlighted, accept selection. Press the cursor DOWN button to select MANUAL SETUP . Once highlighted, accept selection. 1 2 3 4 5 ...notes on manual tuning As well as an automatic tuning procedure your HIT ACHI television also allows you to input ...

  • Hitachi CL42PD2100 - page 17

    17 entr y method 1 The first option will be to fine tune the chosen frequency either UP or DOWN using the LEFT/RIGHT cursor k eys or search tune UP or DOWN using the UP/DOWN cursor k eys. manual tuning procedure tuning in entr y method 2 If the CH k ey is pressed, you can enter a two digit channel number (CH) using buttons 0 - 9 on your handset. en ...

  • Hitachi CL42PD2100 - page 18

    programme sort tuning in Press the MENU button. MAIN MENU appears. Press the cursor DOWN button to select INST ALL. Once highlighted, accept selection. Press the cursor DOWN button to select MANUAL SETUP . Once highlighted, accept selection. Using the UP/DOWN buttons again you can move the selection to occupy a new position of your choice. Note: Us ...

  • Hitachi CL42PD2100 - page 19

    ...notes on programme name change Programme name change can be very useful if you connect external equipment to your television. For example, if you have a games machine connected, you can name the allocated channel ‘GAME’, making it easier to find. programme name change and download tuning in Press the MENU button. The MAIN MENU appears. Press ...

  • Hitachi CL42PD2100 - page 20

    20 viewlink tuning in What is Viewlink ? The Viewlink function allows the direct communication between your TV and a Viewlink compatible VCR*, enabling features such as downloading of tuning information from the TV to the VCR, making TV/Video setup easier. T o use Viewlink functions... * A Viewlink compatible VCR means a Hitachi VCR with the viewli ...

  • Hitachi CL42PD2100 - page 21

    21 viewlink tuning in Viewlink features - continued PLEASE NOTE: Generally , the VCR cannot record a TV channel that cannot be received properly by the VCR’s tuner , even though you can view that channel on the TV . However , some VCR’s can use the TV ’s output to record a TV channel. For details, refer to your VCR instruction manual. Direct ...

  • Hitachi CL42PD2100 - page 22

    22 customer I.D. tuning in ...notes on Customer I.D. The Customer I.D. feature allows the user to enter a personal security code and address information into the television’s memory , so that in the unfortunate event of thef t, it will help the P olice trace the owner . Please follow the steps below . Press the MENU button. The MAIN MENU appears. ...

  • Hitachi CL42PD2100 - page 23

    23 Repeat steps 6, 7 and 8 to highlight and change your address and postcode. If you mak e a mistak e, or wish to cancel the change of address, press X k ey on your handset . 11 Press O .K. to complete. 10 PLEASE NOTE : After you have changed your address etc., please see ‘password change’ section of this manual before returning to normal TV op ...

  • Hitachi CL42PD2100 - page 24

    24 picture controls programme, sound and vision adjustment Press the MENU button to obtain MAIN MENU. The MAIN MENU highlights the PICTURE option automatically - press OK to select. 1 2 Select the picture control to be adjusted by using the UP / DOWN cursor buttons . Once highlighted, adjust the chosen controls by pressing the LEFT/RIGHT cursor but ...

  • Hitachi CL42PD2100 - page 25

    Nicam and stereo sound controls programme, sound and vision adjustment 25 ...notes on NICAM features NICAM is a method for transmitting and receiving stereo sound. If your TV is unable to receive NICAM because of the wrong geography , climate etc., or when NICAM in not transmitted in your location it will produce a monaural sound source. stereo Thi ...

  • Hitachi CL42PD2100 - page 26

    audio controls programme, sound and vision adjustment 26 Select the control to be adjusted by using the UP/DOWN cursor buttons. Once highlighted, adjust the chosen controls by pressing the LEFT/RIGHT cursor buttons. Press the MENU button to obtain MAIN MENU. Press the cursor DOWN button to select AUDIO . Once highlighted, accept selection . 1 2 3 4 ...

  • Hitachi CL42PD2100 - page 27

    27 Once highlighted, adjust the control by pressing the LEFT/RIGHT cursor buttons. (Options are OFF/LOW/MED/HIGH) T o return to normal TV operation press the TV button on your handset. 7 8 T ruBass programme, sound and vision adjustment In the AUDIO menu, select the TRUBASS option using the UP/DOWN cursor buttons. 6 T ruBass T ruBass takes advantag ...

  • Hitachi CL42PD2100 - page 28

    28 sleep timer and on screen display television features Use UP/DOWN cursor buttons to select option to adjust. Press the MENU button to obtain MAIN MENU. Press the cursor DOWN button to select FEA TURES. Once highlighted, accept selection. 1 2 3 4 Use LEFT/RIGHT buttons to adjust the number of minutes to be used in your television’s countdown. 5 ...

  • Hitachi CL42PD2100 - page 29

    29 ...notes on wide screen features V arious broadcast stations now transmit movies and programmes in true wide screen format. Y our TV detects these signals and automatically switches your TV to the correct viewing format. However , some broadcasters do not transmit this automatic sensing signal, and so your TV will not recognize which format is b ...

  • Hitachi CL42PD2100 - page 30

    30 wide screen viewing television features ...notes on Default Zoom V arious broadcast stations now transmit WSS (Wide Screen Signals) which identif y the picture format movies and programmes are broadcast in. Y our TV can detect these Wide Screen Signals and automatically switch to the correct format. However , some broadcasters do not transmit WS ...

  • Hitachi CL42PD2100 - page 31

    31 ...notes on T eletext T eletext is an on screen information magazine and it is entered by pressing the teletext button on your handset - a page similar to the one below will appear . Select the topic you want to view by entering a three digit number on your handset corresponding to the page number eg. press 1, 0, 1 for the News Headlines. Altern ...

  • Hitachi CL42PD2100 - page 32

    32 T o use headphones with your TV insert the headphone jack plug (3.5mm) into the corresponding sock et. Use this sock et, along with audio in right to obtain sound from your external equipment through your TV ’s speak ers. Use this sock et with an S- VHS or Hi8 camera to view your recordings. Use this in conjunction with a standard 8mm camera o ...

  • Hitachi CL42PD2100 - page 33

    33 Press the MENU button. The MAIN MENU appears. Press the cursor DOWN button to select INST ALL. Once highlighted, accept selection. Press the cursor DOWN button to select MANUAL SETUP . Once highlighted, accept selection. Use the UP/DOWN cursor k eys to select the programme you wish to use and the LEFT/RIGHT cursor k eys to move the selection bar ...

  • Hitachi CL42PD2100 - page 34

    34 option 2 A V2 is the signal source used when connecting external equipment such as home entertainment systems and Set T op Bo xes/Decoders through a scart lead to the A V2 socket at the rear of your TV . option 3 A V3 is the signal source used when connecting temporary equipment lik e a camcorder through the audio/video sock ets at the front of ...

  • Hitachi CL42PD2100 - page 35

    Language This enables you to change the language of the On Screen Displays. Please see below for details. language and installation other features Press the MENU button. The MAIN MENU appears. Press the cursor DOWN button to select INST ALL. Once highlighted, accept selection. 1 2 3 35 Press the cursor DOWN button to select LANGUAGE. 4 Adjust to yo ...

  • Hitachi CL42PD2100 - page 36

    programme download and demo mode other features Programme Download If you have purchased a Viewlink compatible VCR, select this feature to download the programme listings from your TV to the new VCR. REPEA T STEPS 1 - 3 AS PREVIOUS . Press the cursor DOWN button to select PROGRAMME DOWNLO AD. Once highlighted, accept selection. 1 4 5 Y our TV will ...

  • Hitachi CL42PD2100 - page 37

    screen saver , screen wipe and no signal shutdown other features Screen Saver This feature moves the picture around the screen in small amounts, at set inter vals, to reduce persistence. This is where stationary objects, such as screen logos, leave a slight image visible af ter they should have disappeared. T o return to normal TV operation, press ...

  • Hitachi CL42PD2100 - page 38

    PC mode other features 38 PC Mode This enables you to connect your home computer , or laptop computer , to your TV to use the plasma screen as a display . Once all equipment has been connected correctly and switched on, press the AV button on your handset until ‘PC’ is displayed on the screen. Once you have entered PC Mode, whatever is being di ...

  • Hitachi CL42PD2100 - page 39

    SETUP OPTIONS PC mode other features 39 Press the MENU button. The PC SETUP 1 menu appears. Press the UP/DOWN cursor buttons to select each option and the LEFT/RIGHT cursor buttons to change. Please see below for details on each of these options. Once you have altered the options, highlight PC SETUP 2 and press the LEFT/RIGHT cursor buttons. 1 3 4 ...

  • Hitachi CL42PD2100 - page 40

    PC mode other features 40 Recommended signal This A VC unit has the following input signals already stored. No. SIGNAL SIGNAL VGA VESA RESOLUTION VERT . FREQ. (Hz) HORIZONT AL FREQUENCY (KHz) DOTCL OCK FREQUENCY (MHz) NOTES 1 2 3 4 5 6 7 8 9 10 11 12 13 640 X 400 1280 X 1024 1280 X 1024 1280 X 768 1280 X 768 1280 X 768 800 X 600 800 X 600 800 X 600 ...

  • Hitachi CL42PD2100 - page 41

    trouble shooting guide information 41 questions answers remedy possible reason problem identification snowy picture - poor sound multiple images - sound O .K intermittent interference no picture or sound Connection of aerial lead to the TV is poor . Corroded or poor aerial connections. Aerial has moved position. Adverse weather conditions. T ransmi ...

  • Hitachi CL42PD2100 - page 42

    42 Thank Y ou for purchasing this Hitachi T elevision. In the unlik ely event that this product should develop a fault, we undertak e to repair or replace any part of the product which fails due to a manufacturing defect within 12 months of the date of purchase provided that... 1. the product has been installed and used only in accordance with the ...

  • Hitachi CL42PD2100 - page 43

    43 HIT ACHI environmental notice information Hitachi are signatories to the commitment made by the consumer electronics industry on reducing energy consumption by televisions and video recorders on standby . Even though your TV has a low power consumption, you can reduce waste to zero if you switch off the set at the mains af ter use. Y our TV shou ...

  • Hitachi CL42PD2100 - page 44

    44 scar t sockets 21 19 17 15 13 11 9 7 5 3 1 20 18 16 14 12 10 8 6 4 2 television specification TV Standard............................................................................................50Hz Aerial Impedance ..................................................................................75 unbalanced Screen Size .................... ...

  • Hitachi CL42PD2100 - page 45

    technical data information S- VHS socket FUNCTION CHROMINANCE INPUT LUMINANCE INPUT CHROMINANCE GROUND LUMINANCE GROUND FRAME GROUND PIN 1 2 3 4 5 1 2 4 5 3 45 mini D -sub 15 pin connector 1 2 4 5 3 INPUT SIGNAL R VIDEO G VIDEO B VIDEO NONE NONE R GND G GND B GND NONE GND NONE NONE H SYNC V SYNC NONE PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 7 9 10 ...

  • Hitachi CL42PD2100 - page 46

    Hitachi, Ltd. Tokyo, Japan International Sales Division THE HITACHI ATAGO BUILDING, No. 15 – 12 Nishi Shinbashi, 2 – Chome, Minato – Ku, Tokyo 105 - 8430, Japan. Tel: 03 35022111 HITACHI EUROPE LTD. HITACHI EUROPE S.A. Dukes Me adow 364, Kifissias Ave. & 1, Delfon Str. Millboard Road 152 33 Chalandri Bourne End Athens Buckinghamshire GREE ...

Fabricant Hitachi Catégorie Plasma TV

Les documents que nous recevons du fabricant de l'appareilHitachi CL42PD2100 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Hitachi
- manuels d’utilisations CL42PD2100
- fiches produit Hitachi
- dépliants
- ou étiquettes-énergie Hitachi CL42PD2100
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Hitachi CL42PD2100.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Hitachi CL42PD2100, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Hitachi CL42PD2100. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Hitachi CL42PD2100.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Hitachi CL42PD2100, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Hitachi CL42PD2100 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Hitachi CL42PD2100.

Le manuel d’utilisation complet Hitachi, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Hitachi CL42PD2100 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Hitachi CL42PD2100, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lHitachi CL42PD2100 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Hitachi CL42PD2100 - qui devraient nous aider dans les premières étapes lors de l'utilisation Hitachi CL42PD2100
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Hitachi CL42PD2100
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Hitachi CL42PD2100 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Hitachi CL42PD2100?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Hitachi CL42PD2100, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Hitachi CL42PD2100 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)