Français dropdown-ico

Manuel d’utilisation Symbol Technologies MC3000

152 pages 4.09 mb
Télécharger

Aller à la page of 152

Summary
  • Symbol Technologies MC3000 - page 1

    MC3000 User Guide ...

  • Symbol Technologies MC3000 - page 2

    ...

  • Symbol Technologies MC3000 - page 3

    MC3000 User Guide 72-68899-02 Rev A October 2005 ...

  • Symbol Technologies MC3000 - page 4

    © 2005 by Symbol T echnologies, Inc. All rights reserved. No part of this publication may be reproduced or used in any form , or by any electrical or mechanical means, without permission in writing from Symbol. This includes electronic or mechanical means, such as phot ocopying, recording, or information storage and retrieval sys tems. The materia ...

  • Symbol Technologies MC3000 - page 5

    Revision History Changes to the original manual are listed below: Change Date Description -01 Rev A Dec. 2004 Initial Release -01 Rev B June 2005 Added Four Slo t Ethernet cradle. Added Fabri c Holster . Appendix A, added Accessory Specificatio ns. Add Appendix C, Regulatory . -02 Rev A Sept. 2005 Global chan ges: Changed Windows CE.NE T 4.2 to Win ...

  • Symbol Technologies MC3000 - page 6

    ...

  • Symbol Technologies MC3000 - page 7

    Contents Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii About This Guide Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Symbol Technologies MC3000 - page 8

    MC3000 U ser Guid e vi Demo Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-11 Waking the Mobile Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-12 Main Battery Rem ...

  • Symbol Technologies MC3000 - page 9

    Contents vii Chapter 3. Using Bluetooth Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3- 3 Adaptive Frequency Hopping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Symbol Technologies MC3000 - page 10

    MC3000 U ser Guid e viii Chapter 4. Accessories Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3 Cradles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Symbol Technologies MC3000 - page 11

    Contents ix Appendix B. Keypad Functi ons/Special Characters Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3 Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Symbol Technologies MC3000 - page 12

    MC3000 U ser Guid e x ...

  • Symbol Technologies MC3000 - page 13

    About This Guide Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Documentation Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Symbol Technologies MC3000 - page 14

    MC3000 U ser Guid e xii ...

  • Symbol Technologies MC3000 - page 15

    xiii Introduction This guide provides information abo ut using the MC3000 mob ile computers and accessories . Screens and windows pictured in this guide are samples and may differ from actua l screens. Documentation Set The documentation set for the MC3000 is divided into guides that provide information for specific user needs. • Microsoft Applic ...

  • Symbol Technologies MC3000 - page 16

    MC3000 U ser Guid e xiv Configurations This guide covers the following configurations: MC3000-R - color or monochrome dis play , 32MB/64 MB or 64MB/64MB memory , laser scanner in rotating turret, Windows CE .NET 5.0 Core or Win dows CE .NET 5.0 Professional Operating System. MC3090-G - 802.11b/g/a radio, color or mono chrome display , 32MB/64MB or ...

  • Symbol Technologies MC3000 - page 17

    xv Notational Conventions The following conve ntions are used in this document: • The term “mobile computer” refers to the Symbol MC3000. • Italics are used to highlight the following: • Chapters and section s in this and related documen ts • Dialog box, window an d screen names • Drop-down list and list box names • Check box and ra ...

  • Symbol Technologies MC3000 - page 18

    MC3000 U ser Guid e xvi Service Information If an equipment problem occurs, contact the appropriate regional Symbol Support Center , see page xv i for contact information. Before calling, have the model number , serial number and several bar code sy mbols at hand. Call the Support Center from a p hone near the scanning e quipment so that the servic ...

  • Symbol Technologies MC3000 - page 19

    xvii Finland/Suomi Oy Symbol T echnolo gies Kaupintie 8 A 6 FIN-00440 H elsinki, Finl and 9 5407 580 (Inside Fin land) +358 9 5407 580 (Outsid e Finland) France Symbol T echnol ogies France Centre d'Af faire d'Anto ny 3 Rue de la Re naissance 92184 Anto ny Cedex, France 01-40-96-52-2 1 (Inside France) +33-1-40- 96-52-50 (Outs ide France) ...

  • Symbol Technologies MC3000 - page 20

    MC3000 U ser Guid e xviii If the Symbol product was purchased from a Symbol Bu siness Partner , contact that Business Partn er for service. Sweden/Sverige “Letter” address: Symbol T echnologies AB Box 1354 S-171 26 SOLNA Sweden Visit/shipping addr ess: Symbol T echnologies AB Solna Strandvä g 78 S-171 54 SOLNA Sweden Switchboard: 08 445 29 00 ...

  • Symbol Technologies MC3000 - page 21

    Getting Started Chapter Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Unpacking the Mobile Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Symbol Technologies MC3000 - page 22

    MC3000 U ser Guid e 1-2 Introduction This chapter describes the mobile co mputer physical characteristics, how to install and charge the batteries, how to remove and replace the Strap/Door Assemb ly and how to start the mobile computer for the first time. Unpacking the Mobile Computer Carefully remove all protective material from around the mob ile ...

  • Symbol Technologies MC3000 - page 23

    Getting Started 1-3 Accessories T able 1-1 lists the MC3000 accessories. T able 1-1. MC3000 Accessories Accessory Description Single Slot Ser ial/USB Cradle Charges the mobile co mputer main ba ttery and a s pare battery, and synchronizes the mo bile computer with a host computer through eit her a serial o r USB connection. Four Slot Charge Only Cr ...

  • Symbol Technologies MC3000 - page 24

    MC3000 U ser Guid e 1-4 Parts There are three versions of th e MC3000 mobile computers, the MC3 000 1D/2D Imager (MC3000-K or MC3090-K), the MC3000 Laser with Rotating Scan T urret (MC3000-R or MC3090-R) and the MC 3090 Gun (MC3090-G). Fo r more information on the Rotating Scan T urret, see Figure 1-3 on page 1-5 . Figure 1-1. MC3000 Imager and MC3 ...

  • Symbol Technologies MC3000 - page 25

    Getting Started 1-5 Figure 1-2. MC3000 Imager and MC3000 Laser Mobile Computers (Back View) Rotating Scan T urret The MC3000-R mobile computer features a Rotating Scan T urret with three po sition stops. This feature offers greater scann ing flexiblilty . Figure 1-3. Rotating Scan T urret Strap/Door Assembly Scan Window Stylus MC3000-K MC3000-R Lat ...

  • Symbol Technologies MC3000 - page 26

    MC3000 U ser Guid e 1-6 Figure 1-4. MC3000-G Mobile Computer Mobile Computer Startup T o start using the mobile computer: • Install the main battery . • Charge the main battery and the back up battery . • Start the mobile computer . Install Main Battery If the main batte ry is charged, the mobile c omputer can be us ed immediately . If the ma ...

  • Symbol Technologies MC3000 - page 27

    Getting Started 1-7 3. Insert the battery into the slot, bottom first and press the battery gently into the slot. The b attery clip locks the battery into place. 4. With the latches in the open positio n, replace t he Strap/Door Assem bly , top first and pres s to close. 5. Rotate the latches (to the lock position) to lock the Strap/Door Assembly i ...

  • Symbol Technologies MC3000 - page 28

    MC3000 U ser Guid e 1-8 Figure 1-6. Main Batter y Installation (MC3000-G) Strap/Door Assembly Battery Hand Strap Latches Strap/Door Assembly ...

  • Symbol Technologies MC3000 - page 29

    Getting Started 1-9 Battery Charging Use the mobile computer cradles, cables and spare ba ttery chargers to charge the mobile computer main battery . The main battery can be charged befo re insertion into the mobile computer or after it is installed. There are two main batterie s for the MC3000, the Standard Battery and the Extended Life Battery . ...

  • Symbol Technologies MC3000 - page 30

    MC3000 U ser Guid e 1-10 Spare Battery Charging There are three accessories that can be used to charge a spare battery: • Single Slot Serial/U SB Cradle • Four Slot Spare Battery Charger •U B C A d a p t e r . T o charge a spare battery: 1. Connect the charging accessory to the ap propriate power source. See Chapter 4, Acce ssories for setup ...

  • Symbol Technologies MC3000 - page 31

    Getting Started 1-11 Starting the Mobile Computer When the mobile computer is powered on for the first time, it initializes. The Symbol Splash screen appears for a short pe riod of time, followed by the Calibration screen. Figure 1-7. Symbol Splash Screen After the calibration procedure is performe d the factory settings launch the Demo window . Ap ...

  • Symbol Technologies MC3000 - page 32

    MC3000 U ser Guid e 1-12 applications were not deve loped to support end users. Re fer to the Sy mbol Application Guide for information about the Demo window applications. Figure 1-9. Demo Window W aking the Mobile Computer The wakeup condition settin gs are used to define what actions wa ke up the mo bile computer . The settings are configura ble ...

  • Symbol Technologies MC3000 - page 33

    Getting Started 1-13 b. On the MC3090-G, pull the battery pull tab to unclip the ba ttery and lift the batte ry out top first. If the battery does not have a pull tab, use the stylus to unclip the battery and then lift the battery . Figure 1-10. Main Batt ery Removal (MC3000-K/R) Figure 1-11. Main Batt ery Removal (MC3090-G) Battery Clip Latches St ...

  • Symbol Technologies MC3000 - page 34

    MC3000 U ser Guid e 1-14 The SD card holder is located under the battery . T o install the SD card, see Secure Device Card on page 4-13 . Strap/Door Assembly Remova l and Replacement (MC3000-K/R) The Strap/Door Assembly co nsists of a hand strap and the b attery door . There are two vers ions of this assembly , one for the Sta ndard Battery and on ...

  • Symbol Technologies MC3000 - page 35

    Getting Started 1-15 Strap/Door Assembly Remova l and Replacement (MC3090-G) The Strap/Door Assembly consists of a hand strap and the battery door . Before removin g the Strap/Door Assembly , press the red Power button to turn off the screen and set the mobile compute r to suspend mode. T o remove the Strap/Door Assembly: 1. Slip the button through ...

  • Symbol Technologies MC3000 - page 36

    MC3000 U ser Guid e 1-16 ...

  • Symbol Technologies MC3000 - page 37

    Operating the MC3000 Chapter Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Power Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Symbol Technologies MC3000 - page 38

    MC3000 U ser Guid e 2-2 Scan LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-17 Scanning Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-17 Laser Decode Range ...

  • Symbol Technologies MC3000 - page 39

    Operating th e MC3000 2-3 Introduction This chapter provides basic instruc tions for using the mobile computer and navigating the mobile comp uter software. Power Button Press the red Power button to toggle the mob ile computer between susp end and resume. When the screen is off the mobile computer is in suspend mode and when the scree n is on the ...

  • Symbol Technologies MC3000 - page 40

    MC3000 U ser Guid e 2-4 28-Key Keypad The 28-ke y keypad cont ains a Power button, application keys, scroll keys and functi on keys. The key pad is color -coded to indicate the alternate function key (b lue) values and the alternate ALPHA key (orange) values. Note that keypa d functions can be changed by an application so the mobile com puter keypa ...

  • Symbol Technologies MC3000 - page 41

    Operating th e MC3000 2-5 Scroll Left and Right Moves left and right f rom one item to another . Increases/decreases specified va lues. Produces a TA B when t he blue FUNC k ey is activate d and the r i ght arrow key is pressed. ESC Produces the ESC functi on by defau lt. CTRL Press and release the CTRL key to activat e the keypad alternate CTRL f ...

  • Symbol Technologies MC3000 - page 42

    MC3000 U ser Guid e 2-6 38-Key Keypad The 38-ke y keypad cont ains a Power button, application keys, scroll keys and functi on keys. The key pad is color -coded to indicate the alternate function key (blue) values. Note that keypad fun ctions can be chan ged by an application so the mob ile computer ke ypad may not function as described. See T a bl ...

  • Symbol Technologies MC3000 - page 43

    Operating th e MC3000 2-7 Scan (yellow) Used in scan ning applica tions, press to scan a bar code. Scroll Left and Right Moves left and right from one item to another by def ault. Produces a TA B when the blue FUNC key is activ ated and the right arro w key is presse d. Scroll Up and Down Moves up and down from one item to another by de fault. ALPH ...

  • Symbol Technologies MC3000 - page 44

    MC3000 U ser Guid e 2-8 48-Key Keypad The 48-ke y keypad cont ains a Power button, application keys, scroll keys and functi on keys. The key pad is color -coded to indicate the alternate function key (blue) values. No te , that keypad fun ctions can be change d by an applica tion so the mobile c omputer k eypa d may not function as described. See T ...

  • Symbol Technologies MC3000 - page 45

    Operating th e MC3000 2-9 Numeric/Scroll/Select Numeric, scroll, select keys. Nume ric by default. With the orange key activat ed, the 2 , 4 , 6 , and 8 keys prod uce scroll functions a nd the 5 key prod uces a select function. W ith the FUNC key activated, 7 produces the ES C function and 9 produce s the TA B function. Shift Press and release th e ...

  • Symbol Technologies MC3000 - page 46

    MC3000 U ser Guid e 2-10 Demo Window On initial power up (or on a warm or cold boot) the Demo wind ow appears. This window links to the T est Applications window and the two windows provide the sample/demo applicat ions. The samp le/demo application s are intended to be used by app lication developers as application development exa mples. These app ...

  • Symbol Technologies MC3000 - page 47

    Operating th e MC3000 2-11 T askbar The taskbar (at the bottom of the s creen) displays the Start button, active programs, battery status and communication status. The taskbar icons are described in T able 2-5 . The taskbar icons display the function status, indicate what programs are ac tive and indicate the battery charge status. The T askbar but ...

  • Symbol Technologies MC3000 - page 48

    MC3000 U ser Guid e 2-12 Battery Unknown Icon The Battery Unknown icon displays when communication with the s mart battery has not been estab lished. As part of normal opera ti on this icon may be displayed for 30 secon ds following a mobile computer reset. If the icon displays beyond this 30 secon d period: 1. Remove and re-s eat the battery . 2. ...

  • Symbol Technologies MC3000 - page 49

    Operating th e MC3000 2-13 • Suspend : Places the mobile compu ter in the suspend state. Figure 2-7. Start Menu Programs Menu From the Start menu, tap Programs to launch the Programs menu. The programs provided with Windows CE .NET 5.0 Professional and Windows CE .NET 5.0 Core are displayed in the Programs menu. Refer to the Symbol Applicat ion G ...

  • Symbol Technologies MC3000 - page 50

    MC3000 U ser Guid e 2-14 • Recycle Bin: Deleted files remain in the recycle bin until the recycl e bin is emptied. Once emptied the files ca nnot be retrieved. Windows CE .NET 5.0 Professional desktop functions include: • My Computer: Double-tap the icon to open My Computer . • Recycle Bin: Deleted files remain in the recycle bin until the re ...

  • Symbol Technologies MC3000 - page 51

    Operating th e MC3000 2-15 4. T ap OK to save the settings and exit the window . Figure 2-11. T askbar and Start Menu, General T ab Advanced T ab 1. T ap the Advanced tab to enter the T askbar and Start Menu , Advanced tab. 2. T ap the Clear button to delete all of the documen ts listed in the Start - Documents entry , see Start Button on page 2-12 ...

  • Symbol Technologies MC3000 - page 52

    MC3000 U ser Guid e 2-16 Entering Information Using the Keyboard Input Panel Use the keyboard input panel (soft keyboard ) to enter information in any program. T o launch the keyb oard input panel, tap the button on the taskbar . T ap a key to enter the value. T ap the keyb oard input p anel button to disp lay or to hide the key board inp ut panel. ...

  • Symbol Technologies MC3000 - page 53

    Operating th e MC3000 2-17 Scan LED Indicators The red/green Scan LED Indicators (located in the Indicator LE D Bar and in the rotating turret ) indicates the scan sta tus. For the location of the Scan LED Indicators see, Figure 1-1 on page 1-4 . Scanning Considerations Scanning consists of; aim , scan and decode. Scan ning performance can be optim ...

  • Symbol Technologies MC3000 - page 54

    MC3000 U ser Guid e 2-18 is the width in mils of the narrowest element (bar or space) in the symbol. The maximum usab le length of a symb ol at any given range is shown b elow . Figure 2-15. MC3000 Laser Decode Range s T able 2-7. MC3000 Laser Decode Ranges Bar Code Density Ranges Near Far 5.0 mil 2.0 in 5.08 cm 4.9 in 12.45 cm 7.5 mil 1.6 in 4.06 ...

  • Symbol Technologies MC3000 - page 55

    Operating th e MC3000 2-19 Imaging The imager version of the mobile compute r has the followin g features: • Omnidirectional reading of a varie ty of bar code symbologies, including the most popular linear , postal, PDF417 and 2-D matrix code types. • The ability to capture and download images to a host for a variety of imaging applicatio ns. ? ...

  • Symbol Technologies MC3000 - page 56

    MC3000 U ser Guid e 2-20 T o scan a symbol using the imager: 1. Center the symbol in any orientation within the aimin g pattern. Ensure the entire symbol is within the rectangular area formed by the brack ets in the aiming pattern. Figure 2-17. Centering Sy mbol in Aiming Pattern The imager can also read a bar code presente d within the aiming patt ...

  • Symbol Technologies MC3000 - page 57

    Operating th e MC3000 2-21 Imager Decode Ranges The decode ranges provide the deco de distances for barcodes of specified den sities. Figure 2-20 shows the imager decode ranges and T able 2-8 on page 2-22 lists the sca n ranges for the selected bar code de ns ities. The minimum e lement width (or “symbol density”) is the width in mils of the na ...

  • Symbol Technologies MC3000 - page 58

    MC3000 U ser Guid e 2-22 T able 2-8. MC3000 Imager Decode Ranges Bar Code Density Ranges Near Far 5.0 mil 4.5 in 11.43 cm 6.5 in 16.51cm 7.5 mil 3.3 in 8.38 cm 10.7 in 27.18 cm UPC A 2.5 in 6.35 cm 14.2 in 36.07cm 20 mil 2 .8 in 7.11 cm 18.9 in 48.01 cm PDF417 6.67 mil 5.3 in 13.46 cm 7.7 in 19.56 cm PDF417 10 mi l 4.3 in 10.92 cm 11.1 in 28.19 cm ...

  • Symbol Technologies MC3000 - page 59

    Operating th e MC3000 2-23 Resetting the Mobile Computer If the mobile co mputer stops responding to input, reset it. Ther e are two reset functions, warm boot and cold boot. A warm boot restarts the mobile c omputer by closing all running programs. All data that is not saved is lost. A cold boot also restarts the mobile computer , but erases all s ...

  • Symbol Technologies MC3000 - page 60

    MC3000 U ser Guid e 2-24 W aking the Mobile Computer The default wakeup conditions define wh at actions wakeup the m obile compu ter . These settings are configurable an d the factory default settings shown in T able 2-9 a re subject to change /update. File Sy stem Directory Structure The mobile compute r directory structure displays a ll of the fi ...

  • Symbol Technologies MC3000 - page 61

    Operating th e MC3000 2-25 All files copied to the RAM based folders are lost after a cold boot. Connecting to the Internet on a Wireless LAN Network The mobile compu ter can connect to the Internet a cross a wireless LAN netwo rk. The Wireless Applications utility starts automatically when the mobile computer is turned on and the wi reless applica ...

  • Symbol Technologies MC3000 - page 62

    MC3000 U ser Guid e 2-26 ...

  • Symbol Technologies MC3000 - page 63

    Using Bluetooth Chapter Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3- 3 Adaptive Frequency Hopping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Symbol Technologies MC3000 - page 64

    MC3000 U ser Guid e 3-2 Put File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-15 Connect to Internet Using Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 -16 Dial-Up Networking Serv ...

  • Symbol Technologies MC3000 - page 65

    Using Bluetooth 3-3 Introduction Bluetooth-equipped devices can co mmunicate without wires, using fre quency-hopping spread spectrum (FHSS) RF to transm it and receive data in the 2.4 GHz Indus try Scientific and Medical (IS M) band (802.15.1). Bluetooth wire less technology is specificall y designed for short-range (30 feet/10 meters) communicatio ...

  • Symbol Technologies MC3000 - page 66

    MC3000 U ser Guid e 3-4 It is recommended: • Perform pairing in a secure environ ment • Keep PIN codes private and don't store the PIN codes in the mobile computer • Implement application-level security . T urning the Bluetooth Radio Mode On and Off T urn off the Bluetooth radio to save power or if entering an area with radio restriction ...

  • Symbol Technologies MC3000 - page 67

    Using Bluetooth 3-5 Enabling Bluetooth T o enable Bluetooth, tap Bluetooth icon - Enable Bluetooth . The Bluetooth ico n changes to indicate that Bluetooth is enabled. Figure 3-2. Enable Bluetooth Bluetooth Power States Cold Boot When a cold boot is performed on the mobile computer , Bluetooth turns off. It is normal to see the Bluetooth icon ap pe ...

  • Symbol Technologies MC3000 - page 68

    MC3000 U ser Guid e 3-6 When switching between Wizard Mode an d Explorer Mode, all active c onnections are closed. The following steps provide an example fo r using the Wizard to services for remote devices. 1. T ap the Bluetooth icon and select Show BTExplorer . The BTExpl orer window appears. 2. T ap File - New Co nnection . The New Co nnection W ...

  • Symbol Technologies MC3000 - page 69

    Using Bluetooth 3-7 5. Select a device from the list and then tap Next . The Connection Favorite Options window appears. Figure 3-5. Connection Favorite Options Window 6. Select Save As Favorite check box to save this service in the Favorite view . 7. In the Favo rite Name text box, enter a name for this serv ice that will appear in the Favorite li ...

  • Symbol Technologies MC3000 - page 70

    MC3000 U ser Guid e 3-8 Explorer Mode The BTExplorer window is streamlined and ea sy to navigate and provides greater control to users familiar with Bluetooth functionality . The menu bar provides quick access to the options and tools use d to connect to devices. Figure 3-7. Explorer Mode Window Y ou can also us e the “tap and hold” technique t ...

  • Symbol Technologies MC3000 - page 71

    Using Bluetooth 3-9 3. T ap the Bluetooth icon and select Show BTExplorer . T he BTExplor er window appears. Figure 3-8. BTExplorer Window 4. T ap and hold Remote Devices and select Discover Devices from the pop-up menu. The mobile computer searches for Bluetooth devices in the area. Figure 3-9. Discover Devices 5. The discovered device s display i ...

  • Symbol Technologies MC3000 - page 72

    MC3000 U ser Guid e 3-10 Bonding with Discovered Device(s) A bond is a relationship created be tween the mobile compu ter and another Bluetooth de vice in order to exchange information in a secure manner . Creating a bon d involves entering the same PIN on the two devices to bond . Once a bond is created, and th e Bluet ooth radios are turned on, t ...

  • Symbol Technologies MC3000 - page 73

    Using Bluetooth 3-11 7. The devices are s uccessfully paired. The d evice name moves to the T rusted Devices folder . Figure 3-13. Bonded (Pai red) Discovered Device Renaming a Bonded Device If it is necessary to rename a bonded device, it can be don e from the BTExplorer window . 1. Launch BTExplorer . 2. T ap and hold th e device to rename and se ...

  • Symbol Technologies MC3000 - page 74

    MC3000 U ser Guid e 3-12 3. The Change Device Name win dow appears. Figure 3-15. Change Device Name Window 4. Enter a new name for the bonded device in the text box. T ap OK . Deleting a Bonded Device If it is no longer necessary to connect with a device, delete it from the Blueto oth Bonded Devices windo w . 1. Launch BTExplorer . 2. T ap and hold ...

  • Symbol Technologies MC3000 - page 75

    Using Bluetooth 3-13 2. When prompted to bond with the remote device the PIN Code Request window appears. Figure 3-17. PIN Code Request Window Connections to untrusted devices are a se curity risk. 3. In the PIN Code: text box, enter the sa me PIN that was entered on the device requesting the bond. The PIN must b e between 1 and 16 characters. 4. I ...

  • Symbol Technologies MC3000 - page 76

    MC3000 U ser Guid e 3-14 3. The mobile computer communic ates with the remote device and then lists the services under the device name. Figure 3-19. List of Discovered Services Some examples of available serv ices are: • File T ransfer Service s • Dial-Up Networking Services • Headset or Hands-Free Se rvices • OBEX Object Push Services • ...

  • Symbol Technologies MC3000 - page 77

    Using Bluetooth 3-15 8. Select a folder . The contents of the folder ap pear in the sub-window . Figure 3-20. Remote Device Folders 9. T ap and hold on the file. A pop-up menu appea rs. 10. Select the action to perform: a. New - create a new file or folder . on the remote device b. Delete - delete the selected file on the remote device. c. Get File ...

  • Symbol Technologies MC3000 - page 78

    MC3000 U ser Guid e 3-16 3. T ap Open. The file is transferred from the mobile computer to the remote device . Connect to Internet Using Access Point This section explains how to acces s a Bluetooth-enabled LAN acce ss point (AP) for a network connection. With this method of communication the Internet Explorer can be use d to connect to a server . ...

  • Symbol Technologies MC3000 - page 79

    Using Bluetooth 3-17 6. T ap and hold on Dial-up Netw orking and select Co nnect from the pop-u p menu. The Select Dial-up Networking Entry window appears. Figure 3-21. Select Dial -up Networking Entry Window If a dial-up entry is not listed, see Add a Dial-up Entry on page 3-1 8 . 7. Select a dial-up entry . 8. T ap OK . The mobile computer begins ...

  • Symbol Technologies MC3000 - page 80

    MC3000 U ser Guid e 3-18 16. T o end a session, tap the Connectio n icon and then tap Disconne ct in the dialog box. Add a Dial-up Entry T o add a dial-up entry: 1. In the Select Dial-u p Networking Entry window , tap and hold and then select Add Entry from the pop-up menu. Figure 3-23. Add Dial-Up Entry 2. The Add Phone Book Entry window appe ars. ...

  • Symbol Technologies MC3000 - page 81

    Using Bluetooth 3-19 4. Select the T r usted Devices folder . 5. T ap the remote device folder . 6. T ap and hold on OBEX Object Push and select Connect . The OBEX Object Push window appears . 7. In the Action drop-down list, select one o f the options: Se nd Contact Information , Swap Contact Information , Fe tch Contact Information or Send a Pict ...

  • Symbol Technologies MC3000 - page 82

    MC3000 U ser Guid e 3-20 9. Navigate to the picture that you want to send to the other device. 10. T ap Open . 11. T ap OK . The picture is sent to the other de vice and a confirmati on dialog box appe ars on the other device to accept the picture. A Send Pic ture dialog appears. 12. T ap Ok . Headset Services T o connect to a Bluetooth headset: 1. ...

  • Symbol Technologies MC3000 - page 83

    Using Bluetooth 3-21 6. T ap and hold Serial Port and sele ct Connect in the pop-up menu. The Remote Service Co nnection window ap pears. Figure 3-26. Remote Service Connection Window 7. In the Loca l COM Port drop-down list select a COM port. 8. T ap OK . Personal Area Network Services Connect two or mo re Bluetooth device s to share files, collab ...

  • Symbol Technologies MC3000 - page 84

    MC3000 U ser Guid e 3-22 Bluetooth Settings Use the BTExplor er Settings window to configure the operation of the BTExplorer app lication. T ap T ools - Settings . The BTE xplorer Settings window ap pears. Device Info T ab Use the Device Info tab to configure the mobile computer’ s Bluetooth connection modes. Figure 3-27. BTExplorer Se ttings - D ...

  • Symbol Technologies MC3000 - page 85

    Using Bluetooth 3-23 Services T ab For security reason, by default services ar e not enabled. Use the Services tab to add or delete Bluetooth serv ices. Figure 3-28. BTExplorer Se ttings - Services T ab T o add a service: 1. T ap Add . The Add Loc al Service window displays. Figure 3-29. Add Local Service Window 2. In the list, select a service to ...

  • Symbol Technologies MC3000 - page 86

    MC3000 U ser Guid e 3-24 Dial-Up Networking Service Dial-up Networking allows a dial-up modem to be accesse d by other Bluetooth devices. Figure 3-30. Add Local Service Window File T ransfer Service File transfer allows files to be browsed by other Blue tooth devices. Figure 3-31. File T rans fer Information Window Service Name Displays the name of ...

  • Symbol Technologies MC3000 - page 87

    Using Bluetooth 3-25 OBEX Object Push Service OBEX Object Push allo ws contacts, business ca rds, pictures, ap pointme nts, and tasks to be pushed to the device by other Bluetoo th devices. Figure 3-32. OBEX Exchange Information Window Root Direct ory S elect the dire ctory that ot her Bluetoot h devices can access. File Permissions Select the file ...

  • Symbol Technologies MC3000 - page 88

    MC3000 U ser Guid e 3-26 Personal Area Networking Service Personal Area Networking hosts a Personal Area Network wh ich allows communicatio n with other Bluetooth devic es. Figure 3-33. Persona l Area Networking Window Serial Port Service Serial port allows COM ports to be accessed by other Blu etooth devices. Figure 3-34. Serial Port Service Windo ...

  • Symbol Technologies MC3000 - page 89

    Using Bluetooth 3-27 Headset Service Serial port allows COM ports to be accessed by other Blu etooth devices. Figure 3-35. Heads et Service Window Service Name Displays the name of the service. ...

  • Symbol Technologies MC3000 - page 90

    MC3000 U ser Guid e 3-28 Security T ab T o adjust the security settings for an ind ividual service, select the Services tab first, then select th e individual serv ice, then Properties . Figure 3-36. BTExplorer Settings - Security T ab Use PIN Code (Incoming Connecting) Select for automatic use of the PIN code e ntered in the PIN Code text box. It ...

  • Symbol Technologies MC3000 - page 91

    Using Bluetooth 3-29 Discovery T ab Use the Discovery tab to set and modify discovered dev ices. Figure 3-37. BTExplorer Se ttings - Discovery T ab Inquiry Length Set s the amount of time that the mob ile computer ta kes to discover Bluetooth devices in the area. Name Disco very Mode Select eith er Automatic or manual. Discovered Devices Deletes al ...

  • Symbol Technologies MC3000 - page 92

    MC3000 U ser Guid e 3-30 V irtual COM Port T ab Use the Virtual COM Port tab to select the COM port s for Bluetoo th communicati on. Figure 3-38. BTExplorer Setti ngs - Virtual COM Port T ab If an application uses one of the COM ports assigned to Bluetoo th, opening this port causes the Bluetooth stack to activate and guide you through the connecti ...

  • Symbol Technologies MC3000 - page 93

    Using Bluetooth 3-31 Miscellaneous T ab Figure 3-40. BTExplorer Se ttings - Miscellaneous T ab Highlight Connecti ons Select the connection type to hi ghlight when co nnected. In the Wizard M ode, the only option is Favorites or None. In the Explorer Mo de the options are None, T ree View O nly , List V iew Only or T ree and List View . Apply T ext ...

  • Symbol Technologies MC3000 - page 94

    MC3000 U ser Guid e 3-32 ...

  • Symbol Technologies MC3000 - page 95

    Accessories Chapter Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Cradles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Symbol Technologies MC3000 - page 96

    MC3000 U ser Guid e 4-2 Plastic Holster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-14 Fabric Holster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Symbol Technologies MC3000 - page 97

    Accessories 4-3 Introduction The MC3000 accessories provide a variety of product s upport cap abilities. Accessorie s include cradles, cables, spa re battery ch argers and SD cards. Cradles • The Single Slot Serial/USB cradle charge s the mobile computer main battery and/or a spare battery . It also synchronizes the mobile computer with a host co ...

  • Symbol Technologies MC3000 - page 98

    MC3000 U ser Guid e 4-4 Single Slot Serial/USB Cradle The Single Slot Serial/USB cradle: • Provides 5.4VDC power for operating the mobile comput er , cha rging the battery and charging a spa re battery . • Provides a serial port and a USB port for data communication between the mobile comp uter and a host computer or other serial devices (e.g . ...

  • Symbol Technologies MC3000 - page 99

    Accessories 4-5 T o charge the spare battery: 1. Insert the spare battery into the spare battery charging slot, bottom first, and pivot the top of the battery down onto the contact pins. 2. Gently press down on the battery to ensure proper contact. 3. The Spare Battery Charging L ED (see Figure 4-1 on page 4-4 ) indicates the spare battery cha rgin ...

  • Symbol Technologies MC3000 - page 100

    MC3000 U ser Guid e 4-6 Four Slot Cradles There are two four slot cradles, Four Slot Charge O nly cradle and Four Slot Ethernet c radle. The Four Slot E thernet cradle provides Ethernet communications. Bo th four slot cradles: • Provide 5.4 VDC po wer for operating the mobile comput er and charging the battery . • Simultaneously charges up to f ...

  • Symbol Technologies MC3000 - page 101

    Accessories 4-7 LED Charge Indications The Four Slot cradle s use the m obile computer amber Charg e LED Indicator to indicate the battery chargin g status. See T able 4-1 on page 4-5 for charging status indications. Power LED The green Power LED (only on the Four Slot Charge Only cradle) ligh ts to indicate that the Fou r Slot Charge Only cradle i ...

  • Symbol Technologies MC3000 - page 102

    MC3000 U ser Guid e 4-8 Four Slot Spare Battery Charger The Four Slot Spare Battery Cha rger simultaneously charges up to four spare ba tteries. Use only a Symb ol approved power supply output rated 12 VDC and minimu m 3.3 A. Use of an alternative power supply will void the product warranty and may cau se product damage. See Appendix C, Regulatory ...

  • Symbol Technologies MC3000 - page 103

    Accessories 4-9 Cables The cables are av ailable with a va riety of co nnection capabilities. Use only a Symbol approved powe r supply output rated 5. 4 VDC and minimum 3 A. Use of an alte rnative power supply will void the product warranty and may cause product damage. See Appendix C, Regulatory for the power supply regulatory compliance statemen ...

  • Symbol Technologies MC3000 - page 104

    MC3000 U ser Guid e 4-10 Battery Charging and Operating Power The MC3000 Communication/Charg e cables can charg e t he mobile computer ba ttery and supply operatin g power . T o charge the mobile computer battery: 1. Connect the MC3000 Communication/Charge cable power in put connector to the Symbol approved pow er source. 2. Slide the bottom of the ...

  • Symbol Technologies MC3000 - page 105

    Accessories 4-11 Universal Battery Charger (UBC) Adapter The UBC Adapter can be used with a power supply as a standalon e spar e battery charger or it can be used with the four station UBC2000 to simultaneously charge up to four spare batterie s . For additional information on th e UBC 2000, refer to the UBC 2000 Quic k Reference Guid e p/n 70-3318 ...

  • Symbol Technologies MC3000 - page 106

    MC3000 U ser Guid e 4-12 UBC Adapter LED Charge Indications The UBC Adapter charging LEDs indicate the ba ttery charging st atus. The Standard Battery usually charges in le ss than four hour s and the Extended Life Battery usually cha rges in less than six hours. Figure 4-6. UBC Adapter LEDs T able 4-2. UBC Adapter Ch arge LED Status Indications LE ...

  • Symbol Technologies MC3000 - page 107

    Accessories 4-13 Secure Device Card The Secure Device (SD) card provides secondary non-volatile stor age (the flash memory is slower than RAM). The SD card holder i s located under the battery . Follow proper Electro-Static Disch arge (ESD) precautions to avoid damaging the SD card . Proper ESD precautions inclu de, but are not limited to, working ...

  • Symbol Technologies MC3000 - page 108

    MC3000 U ser Guid e 4-14 Plastic Holster The Plastic Hols ter provides a holder for the mobile computer . It consists o f a mobile computer hold er and a detachable b elt cl ip. Press the release button to remove the detachable belt clip. Figure 4-8. Plastic Holster Pinch the clip release and attach the Plastic Holster to a belt or waist band. Figu ...

  • Symbol Technologies MC3000 - page 109

    Accessories 4-15 T o insert the mobile computer , slide the mobile computer into the P lastic Holster with the screen facing the u ser . T o remove the mobile c omputer , press and lift to remove the mo bile computer . Figure 4-10. Insert and Remo ve the Mobile Computer Insert Mobile Computer Remove Mobile Computer ...

  • Symbol Technologies MC3000 - page 110

    MC3000 U ser Guid e 4-16 Fabric Holster The Fabric Hols ter provides a soft holder for the mobile compute r . It consists of a fabr ic mobile computer holder , a detac hable sho ulder strap and a detacha ble belt clip. Press the release bu tton to remove the de tachable belt clip. See Figure 4-11 to remo ve the detachab le clip see Figure 4-1 2 on ...

  • Symbol Technologies MC3000 - page 111

    Accessories 4-17 Shoulder Strap Remove the detach able belt clip (see Figure 4-11 on page 4 -16 ) and attach the shoulder strap. Figure 4-13. Attach the Fabric Holster T o the Shoulder Strap The Fabric Holster holds the mobile computer on a belt or waist band. 1. T o insert the mobile computer , slide the mobile computer into the F abric Holster wi ...

  • Symbol Technologies MC3000 - page 112

    MC3000 U ser Guid e 4-18 ...

  • Symbol Technologies MC3000 - page 113

    Maintenance & T roubleshooting Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5- 3 Maintaining the Mobile Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Symbol Technologies MC3000 - page 114

    MC3000 U ser Guid e 5-2 ...

  • Symbol Technologies MC3000 - page 115

    Maintenance & Troubles hooting 5-3 Introduction This chapter includes instructions on c leaning and storing the mo bile computer , and provid es troubleshooting solution s for pote ntia l problems during mobile computer operation. Maintaining the Mobile Computer For trouble-free service, observe the following tip s when using the mobile compute ...

  • Symbol Technologies MC3000 - page 116

    MC3000 U ser Guid e 5-4 T roubleshooting Mobile Computer T able 5-1. T roubleshootin g the Mobile Computer Problem Cause Solution Mobile comput er does not turn on. Main battery not charg ed. Charge or replace t he main battery . Main batte ry not installed properly . Ensure the battery is insta lled properly . See Install Main Battery on page 1-6 ...

  • Symbol Technologies MC3000 - page 117

    Maintenance & Troubles hooting 5-5 The mobile comp uter does not accept scan input. Scanning appl ication is no t loaded. V erify that the mobile computer i s loaded with a scanning applic ation. See the system administrator . Unreadable bar code. Ensure the symbol is not defaced. Distance betw een scan window and bar code is incorrect. Ensure ...

  • Symbol Technologies MC3000 - page 118

    MC3000 U ser Guid e 5-6 Single Slot Serial/USB Cradle T able 5-2. T roubleshooting the Single Slot Serial/USB Cradle Symptom Possible Cause Solution Mobile comput er amber Charge LED Indicato r does not l ight when mobile comp uter inserted. Cradle is no t receiving power . Ensure th e power cable is connec ted securely to both the cradle and t o A ...

  • Symbol Technologies MC3000 - page 119

    Maintenance & Troubles hooting 5-7 Four Slot Char ge Only Cradle Four Slot Ethernet Cradle T able 5-3. T roubleshooting the F our Slot Charge Only Cradle Problem Cause Solution Mobile computer amber Charge LED Indicator d oes not light when mobil e computer in serted. Cradle is not receiving po wer . Ensure the power cable is connected secur el ...

  • Symbol Technologies MC3000 - page 120

    MC3000 U ser Guid e 5-8 Four Slot Spare Battery Charger UBC Adapter T able 5-5. T roubleshooting the F our Slot Spare Battery Charger Symptom Possible Cause Solution Spare Battery Charging LED does not lig ht when spar e battery is inserted. Spare battery is not cor rectly seated. Remove and r e-insert the spare batt ery into the charging slo t, en ...

  • Symbol Technologies MC3000 - page 121

    Maintenance & Troubles hooting 5-9 Cables T able 5-7. T roubleshooting the Cables Symptom P ossible Cause Solution Mobile computer amber Charge LED Indicato r does not l ight when mobile computer attached. Cable is not receiving power . Ensure the power cable is connected securely to both the cable and to AC power . Mobile comput er is not se a ...

  • Symbol Technologies MC3000 - page 122

    MC3000 U ser Guid e 5-10 ...

  • Symbol Technologies MC3000 - page 123

    T echnical Specifications Appendix Contents Mobile Computer And Accessory Technical Spec ifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3 ...

  • Symbol Technologies MC3000 - page 124

    MC3000 Inte grator Guide A-2 ...

  • Symbol Technologies MC3000 - page 125

    Technical Specifications A-3 Mobile Computer And Access ory T echnical Specifications T able A-1 summarizes the mobile computer te chnical specificat ions and intended operating environments. T able A-2 summarizes the accessory technical specificat ions and the intended operating en vironments. T able A-1. Mobile Computer T echnical Specifications ...

  • Symbol Technologies MC3000 - page 126

    MC3000 Inte grator Guide A-4 Processor/ Memory Intel ® XScale™ PXA270 312MHz with 32MB RAM/64MB Flash or Intel ® XScale™ PXA270 520MHz with 64MB RAM /64MB Flash Interface RS232, 115.2 kbps max, and U SB WLAN Symbol Spectrum 24, 802.11ab g Keypad Options 28-Key , 38 -Key and 48-Key Data Captur e: Code 39, code 128, code 93 , codabar , code 11, ...

  • Symbol Technologies MC3000 - page 127

    Keypad Functions/Special Characters Appendix Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3 Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Symbol Technologies MC3000 - page 128

    MC3000 U ser Guid e B-2 ...

  • Symbol Technologies MC3000 - page 129

    Keypad Functions/Specia l Characters B-3 Introduction This appendix contains th e keypad functions/sp ecial characters for the 38-Ke y keypad. Each function/special c haracter is includ ed in the table along with how the functi on/special character is gene rated. Keypads The mobile compu ter is available with one of three keypads: • 28-key keypad ...

  • Symbol Technologies MC3000 - page 130

    MC3000 U ser Guid e B-4 T able B-1. Special C haracter Generation Map Special Character 28-Key Keypad Key Sequence, Special Character Generation 38-Key Keypad Key Sequence, Special Character Generation 48-Key Keypad Key Sequence, Special Character Generation [ Use the Keyboard Inp ut Panel* FUNC + 4 FUNC + T ] U se the Keyboard Input Pan el* FUNC + ...

  • Symbol Technologies MC3000 - page 131

    Regulatory Appendix Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3 Accessory Power Supply Regulatory Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3 ...

  • Symbol Technologies MC3000 - page 132

    MC3000 U ser Guid e C-2 ...

  • Symbol Technologies MC3000 - page 133

    Regulatory C-3 Introduction This appendix contains the acces sory power supply regulatory compliance state ments. Accessory Power Supply Regulatory Compliance T able C-1. Accessory Power Supplie s, Regulatory Compliance Statements Accessory Power Supplies Regulatory Compliance Statements Single Slot Se rial/USB Cradle Power Supply Use only a Symbol ...

  • Symbol Technologies MC3000 - page 134

    MC3000 U ser Guid e C-4 ...

  • Symbol Technologies MC3000 - page 135

    Glossary 802.11/802.11 abg A radio prot ocol that may be used by the Symbol radio card. Access Point Access Point (AP) refers to Symbol’ s Ethernet Access Point. It is a piece of communicatio ns equipment that manage s communication s between th e host computer system and one or more wireles s terminals. An AP connects to a wi red Ethernet LAN an ...

  • Symbol Technologies MC3000 - page 136

    MC3000 U ser Guid e GL-2 AirBEAM ® Smart Client AirBEAM® Smart Client is pa rt of Symbol’ s AirBEAM® suite, which al so includes AirBEAM ® Safe and AirBEAM® Manager . The AirBEAM® Smar t Client system uses the network acces sible ho st server to store software files t hat are to be download ed to the mobile computer s. The AirBEAM® Smart C ...

  • Symbol Technologies MC3000 - page 137

    Glossary GL-3 Byte On an addressable bou ndary , eight adjacent binary digits (0 and 1) combined in a pattern to represe nt a specific character or nu meric value. Bits are numbered fr om the right, 0 through 7, with bit 0 the low-order bit. One b yte in memory is used to store one ASCII cha racter . boot or boot-up The process a comput er goes thr ...

  • Symbol Technologies MC3000 - page 138

    MC3000 U ser Guid e GL-4 COM port Communication port; ports are identif ied by number , e.g., COM1, COM2. Continuous Code A bar code or symbol in which all spaces within the symbol are parts of characte rs. There are no intercharacte r gaps in a continuo us code. The abse nce of gaps a llows for great er information density . Cradle A cradle is use ...

  • Symbol Technologies MC3000 - page 139

    Glossary GL-5 Flash Memory Flash memory is responsib le for storing the system firmware and is non-vo latile . If the system power is interrupted the data is not be lost . Gateway Address An IP addre ss for a ne twork gateway o r router . A mobile computer may be part o f a subnet as specified by its IP address and Netmask. It can send pac kets dir ...

  • Symbol Technologies MC3000 - page 140

    MC3000 U ser Guid e GL-6 Interleaved 2 of 5 A binary bar code symbology re presenting characte r pairs in groups of five bars and five inter leaved spaces. Interleaving provides for greater information density . The location of wide elements (b ar/spaces) within each gr oup determines which characte rs are encoded. This continuous code type uses no ...

  • Symbol Technologies MC3000 - page 141

    Glossary GL-7 Mobile Computer In this text, mobile computer refers to the S ymbol portable computer . It can be set up to run as a stand-alone device, or it can be set up to communicate with a netwo rk, using wireless radio technology . Nominal The exact (or ideal) intend ed value for a specified parameter . T olerances are specified as positive a ...

  • Symbol Technologies MC3000 - page 142

    MC3000 U ser Guid e GL-8 Scanning Mode The scanner is ener gized, programmed an d ready to read a bar code. Scanning Sequence A method of p rogramming or co nfiguring parameters fo r a bar code reading syst em by scanning bar code menus. SDK Software Deve lopment Kit Self-Checking Code A symbo logy that uses a checking algo rithm to detect encoding ...

  • Symbol Technologies MC3000 - page 143

    Glossary GL-9 Symbol Length Length of symbol measu red from the begin ning of the quiet zone (margin) adjacent to the start characte r to the end of the quiet zon e (margin) ad jacent to a stop charac ter . Symbology The struct ural rules and convent ions for re presenting data within a particular bar code type (e.g. UPC/EAN, Code 39, PDF417, etc.) ...

  • Symbol Technologies MC3000 - page 144

    MC3000 U ser Guid e GL-10 ...

  • Symbol Technologies MC3000 - page 145

    Numerics 28-key keypad . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4, B-3 38-key keypad . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6, B-3 48-key keypad . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8, B-3 802.11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4 A accessories . . . . . . . . . . . ...

  • Symbol Technologies MC3000 - page 146

    MC3000 User Guide IN-2 main battery . . . . . . . . . . . . . . . . . . . . . . . . . . .1-9 MC3000 communi cation/charge cab les . . . . .4-10 battery charging . . . . . . . . . . . . . . . . . . . 4-10 temperatur e range . . . . . . . . . . . . . . . . . . . . . .1-9 UBC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11 battery sta ...

  • Symbol Technologies MC3000 - page 147

    Index IN-3 holster, plastic . . . . . . . . . . . . . . . . . . . . . . . . 1-3, 4-14 humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3 I icons bluetooth . . . . . . . . . . . . . . . . . . . . . . . 2-11, 2-12 imager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19 aiming . . . . . . . . . . ...

  • Symbol Technologies MC3000 - page 148

    MC3000 User Guide IN-4 contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3 specifications . . . . . . . . . . . . . . . . . . . . . . . . . A -3 SD card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-13 installation . . . . . . . . . . . . . . . . . . . . . . . . . . .4-13 specifications . . . . . . . . ...

  • Symbol Technologies MC3000 - page 149

    Thank you for your input—We value your comments. Tell Us What You Think... We ’d like to know what you think about this Manual. Please take a moment to fill out th is questionnai re and fax this form to: (631) 738-3318, or mail to: Symbol T echnologies, Inc. One Symbol Plaza M/S B-4 Holtsville, NY 11742-1300 Attention: T echnical Publications M ...

  • Symbol Technologies MC3000 - page 150

    ...

  • Symbol Technologies MC3000 - page 151

    ...

  • Symbol Technologies MC3000 - page 152

    72E-68899-02 Revision A - October 2005 Symbol T echnologies, Inc. One Symbol Plaza Holtsville, New Y o rk 11742-1300 http://www .symbol.com ...

Fabricant Symbol Technologies Catégorie Scanner

Les documents que nous recevons du fabricant de l'appareilSymbol Technologies MC3000 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Symbol Technologies
- manuels d’utilisations MC3000
- fiches produit Symbol Technologies
- dépliants
- ou étiquettes-énergie Symbol Technologies MC3000
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Symbol Technologies MC3000.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Symbol Technologies MC3000, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Symbol Technologies MC3000. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Symbol Technologies MC3000.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Symbol Technologies MC3000, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Symbol Technologies MC3000 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Symbol Technologies MC3000.

Le manuel d’utilisation complet Symbol Technologies, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Symbol Technologies MC3000 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Symbol Technologies MC3000, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lSymbol Technologies MC3000 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Symbol Technologies MC3000 - qui devraient nous aider dans les premières étapes lors de l'utilisation Symbol Technologies MC3000
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Symbol Technologies MC3000
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Symbol Technologies MC3000 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Symbol Technologies MC3000?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Symbol Technologies MC3000, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Symbol Technologies MC3000 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)