Français dropdown-ico

Manuel d’utilisation Icom IC-F610

36 pages 0.93 mb
Télécharger

Aller à la page of 36

Summary
  • Icom IC-F610 - page 1

    INSTRUCTION MANUAL iF610 UHF TRUNKED RADIO IC-F610_MPT-2.qxd 05.5.10 1:00 PM Page 1 (1,1) ...

  • Icom IC-F610 - page 2

    Icom, Icom Inc. and the logo are registered trademarks of Icom Incorporated (Japan) in the United states, the United Kingdom, Germany , France, Spain, Russia and/or other coun- tries. IC-F610_MPT-2.qxd 05.5.10 1:00 PM Page 2 (1,1) ...

  • Icom IC-F610 - page 3

    i FOREWORD Thank you for purchasing this Icom product. IC-F610 UHF TRUNKED RADIO is designed and built with Icom’s superior technology and craftsmanship. W ith proper care, this product should provide you with years of trouble- free operation. We want to take a couple of moments of your time to thank you for making the IC-F610 your radio of choic ...

  • Icom IC-F610 - page 4

    ii R W ARNING! NEVER connect the transceiver to an AC outlet. This may pose a fire hazard or result in an electric shock. NEVER connect the transceiver to a power source of more than 16 V DC such as a 24 V battery . This connection will ruin the transceiver . NEVER cut the DC power cable between the DC plug and fuse holder . If an incorrect connec ...

  • Icom IC-F610 - page 5

    iii FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . i IMPORT ANT . . . . . . . . . . . . . . . . . . . . . . . . . . . . i EXPLICIT DEFINITIONS . . . . . . . . . . . . . . . . . . i CAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii T ABLE OF CONTENTS . . . . . . . . . . . . . . . . . . iii 1 P ANEL DESCRIPTION . . . ...

  • Icom IC-F610 - page 6

    1 1 P ANEL DESCRIPTION !2 !1 i r e w q !0 o u y t ■ Front panel q AF VOLUME CONTROL KNOB Rotate the knob to adjust the audio output level. • Minimum audio level is pre-programmed. w ST A TUS UP/DOWN (LEFT UP/DOWN) KEYS* [ ∫ ∫ ] / [ √ √ ] Pushing these keys will scroll up/down the status memory . e FUNCTION DISPLA Y Displays a variety of ...

  • Icom IC-F610 - page 7

    2 1 P ANEL DESCRIPTION t MEMOR Y DOWN (RIGHT DOWN) KEY* [ ] ➥ If the stored calls are displayed by pushing the Call Back key , this key scrolls down the screen. ➥ While entering the dial number via the optional microphone keypad, push the key to delete the last digit as a backspace key . y CLEAR KEY* [Clear/P 4 ] ➥ If this key is pushed durin ...

  • Icom IC-F610 - page 8

    3 1 P ANEL DESCRIPTION ‘ ‘ Programmable key assignment Dealer programmable keys [P 0 ] , [P 1 ] , [P 2 ] , [P 3 ], left Up/Down [ ∫ ∫ ] / [ √ √ ] and right Up/Down [ ]/[ ] can be programmed for one of several functions by your Icom dealer . In the following explanations, programmable function names are bracketed; the specific switch us ...

  • Icom IC-F610 - page 9

    4 1 P ANEL DESCRIPTION ■ Function display q TRANSMIT INDICA TOR Appears while transmitting. w RECEIVE INDICA TOR Appears while receiving a message. e SIGNAL STRENGTH METER Indicates the received signal strength at 4 levels. • If the connection with the communication network is not established, the whole icon turns OFF while blinks. • For a st ...

  • Icom IC-F610 - page 10

    5 2 OPERA TION ■ T urning power ON q Push to turn the power ON. • A power-up alert tone sounds for about 1 sec. and an opening message may appear . w If the transceiver is programmed for a start up passcode, input the digit codes as directed by your dealer . • The keys in the table below can be used for password input. • The transceiver det ...

  • Icom IC-F610 - page 11

    6 2 OPERA TION ‘ ‘ General Push to turn the power ON. A power-up alert tone will be heard. Push again to turn the power OFF . The following information will sequentially appear on the display . D D Opening text The pre-programmed opening text and individual ID will appear . The individual ID consisting of a prefix code (3 digits) + a fleet co ...

  • Icom IC-F610 - page 12

    7 2 OPERA TION t A warning beep will be emitted 10 seconds before the communication timer reaches the limit. When the limit has been reached, the communication will be discon- nected automatically . y T o manually end the communication, push [Clear]. (or push [ ✱ ], then push [#]). D D Making a call with a Memory Individual Code Push [ ]/[ ] to s ...

  • Icom IC-F610 - page 13

    8 2 OPERA TION t A warning sound will be emitted 10 seconds before the communication timer reaches the limit. When the limit has been reached, the communication will be discon - nected automatically . y Push [Clear] to manually end the communication. D D Making a Status Call A status message may be sent to the dispatcher or a remote station having ...

  • Icom IC-F610 - page 14

    9 2 OPERA TION r Push [PTT] to send the status message to the despatch- er . t When the status message has been successfully sent out, ‘OK’ appears on the display . D D Include Call • After moving to the communication channel, you can make an additional call to the other station for them join in to the communication with you. ➥ Make a call ...

  • Icom IC-F610 - page 15

    10 2 OPERA TION D D Group Call • Group Call to the stations having the same prefix and fleet codes. Enter the group code via the keypad and then push [#]. The group call will be started. (e.g.) T o call 200 5001 91 from 200 2001 200, enter 91#. • Group Call to the stations having the same prefix code and a different fleet code. Enter the fl ...

  • Icom IC-F610 - page 16

    11 2 OPERA TION D D Emergency Call • Enter ✱ 9 ✱ plus an individual code or a group code and then push [#]. The emergency call will be started. ‘Selectable Emergency Function; Disable * ’ ➥ Enter ✱ 9, then push [#]. The pre-programmed ‘Emergency Number ’ used for the emergency call. ‘Selectable Emergency Function; Enable * ’ ? ...

  • Icom IC-F610 - page 17

    12 2 OPERA TION • Enter #44n ✱ plus station B’ s individual code and then push [#]. This will allow you to cancel the Divert 3rd Party call. • Enter #45n and then push [#]. This will allow you to can- cel the call that diverted to you. ➥ In the place of ‘n’, enter 1 for voice, 0 for data, or noth- ing for both voice and data. D D SDM ...

  • Icom IC-F610 - page 18

    13 3 RECEIVING ‘ ‘ Receiving a call D D Reception of an individual call When an individual call is received, the telephone beep sounds telling you that a call has been received. Immediately after this, you can talk with the caller . q The caller ’s individual code and count-down timer will appear on the LCD screen. ➥ If the call is from a t ...

  • Icom IC-F610 - page 19

    14 3 RECEIVING ➥ In the case of a call received from the Inter-Prefix, ‘INTER-PFIX’ is displayed on the LCD screen. ➥ The communication time timer will appear on the dis- play . w The individual ID will appear if ‘Display Pressel’ function is enabled, and remain displayed during the current communication. e Pushing [PTT] will allow you ...

  • Icom IC-F610 - page 20

    15 3 RECEIVING ‘ ‘ Progress messages The following messages appear corresponding to the progress of the processing of a call. MESSAGE DESCRIPTION ABORTED . . . . . . Y our call has been aborted (W ait for a while and then make the call again). CALLING . . . . . . .Y our call is now being processed. CALL BACK . . . . .Y o u r ca l l h a s been r ...

  • Icom IC-F610 - page 21

    16 4 OTHER FUNCTION D D Call Back function • If you do not want to answer the call immediately , use this function. ➥ Pushing [Call Back] will allow you to enable or disable the function. • When this function is enabled, the transceiver sends the Call Back to the called station. “CALL BACK” will be dis- played on the called station’ s d ...

  • Icom IC-F610 - page 22

    17 4 OTHER FUNCTION D D Scrambler function The transceiver is compatible with the optional UT -109 (#02)* scrambler unit. ➥ Pre-programmed 5 scrambler code can be selected in the User Setup Menu. (p. 19) NOTE: UT -109 is recommended for trunking operation. Both UT -1 10 and UT -109 are recommended for conven - tional operation. D D Compander func ...

  • Icom IC-F610 - page 23

    18 4 OTHER FUNCTION D D RX Speaker function (optional OPC-617 is required) Output the receive audio to an out-of-vehicle speaker . External audio amplifier and speaker are required. D D Ignition SW function The transceiver ’s power turns ON/OFF automatically depending on the ignition switch position. This function requires additional optional wi ...

  • Icom IC-F610 - page 24

    19 5 USER SETUP MENU ‘ ‘ User Setup Menu By pushing and holding down the [Clear/P 4 ] key for 2.5 sec- onds when your transceiver is in the standby mode (not dur- ing communication, dialling, or operation), the User Setup menu appears. The User Setup menu allows you to use the settings for the backlight, Ringer level, beep level, compander ON/O ...

  • Icom IC-F610 - page 25

    20 6 MAP27 ‘ ‘ MAP27 serial interface MAP27 is a Mobile Access Protocol for MPT1327/1343 com- munication equipment. It permits data exchange between MPT radio equipment and external equipment such as a data terminal which may be a laptop computer . By connecting the OPC-822 OPTIONAL INTERF ACE CABLE to the external connector of the transceiver ...

  • Icom IC-F610 - page 26

    21 7 CONVENTIONAL MODE ‘ ‘ Conventional Mode operation This transceiver has conventional mode capability . Y ou can use up to 32 pre-programmed conventional channels. These channels can be selected with the [ ] or [ ]. ➥ Push the [Mode] key assigned as the dealer programma - ble key to toggle between T runking mode and Conventional mode. The ...

  • Icom IC-F610 - page 27

    22 7 CONVENTIONAL MODE Either Trunking or Conventional mode; [Mode] Push this key to toggle between T runking mode and Conventional mode. [Null] No function is assigned. [High/Low] Pushing this key will toggle in the order of Low1 power, Low2 power , High power and Auto power . [Public Address] Use the transceiver as an amplifier . [RX Speaker] Ou ...

  • Icom IC-F610 - page 28

    23 8 CONNECTION AND MAINTENANCE NEVER connect to a 24 V batter y . Solder Crimp Note: Use the terminals for the cable connections. q Antenna Optional speaker (SP-22) r t Optional cable (OPC-617 or OPC-822) e Supplied DC power cab le w 12V Battery red: blac k: ■ Rear panel and connection IC-F610_MPT-2.qxd 05.5.10 1:00 PM Page 28 (1,1) ...

  • Icom IC-F610 - page 29

    24 8 CONNECTION AND MAINTENANCE q ANTENNA CONNECTOR Connects to an antenna. Ask your Dealer about antenna selection and placement. w MICROPHONE HANGER Connect the supplied microphone hanger to the vehicle ’ s ground for microphone on/off hook functions. e DC POWER RECEPT ACLE Connects to a 12 V DC battery . Pay attention to polari- ties. NEVER co ...

  • Icom IC-F610 - page 30

    25 8 CONNECTION AND MAINTENANCE ■ Mounting the transceiver The front panel can be inverted for correct viewing while leav - ing the built-in speaker facing away from the mounting sur- face. D Inverting the Front panel q Unscrew the 2-side screws. w Detach the Front panel forward from the transceiver . e Bend the fl at cable between Front panel a ...

  • Icom IC-F610 - page 31

    26 8 CONNECTION AND MAINTENANCE D Mounting the transceiver The universal mounting bracket supplied with your transceiv- er allows overhead mounting. • Mount the transceiver securely with the 4 supplied screws to a thick surface which can support more than 1.5 kg. Flat washer Spring washer When using self-tapping screws ■ Optional UT -109 /UT -1 ...

  • Icom IC-F610 - page 32

    27 8 CONNECTION AND MAINTENANCE t r e w q o i u y ■ Optional OPC-617 installation Install the OPC-617 as shown below . OPTIONAL CABLE PIN ASSIGNMENT q LCD backlight cont. IN w AF OUT for P A, RX SP . function e Det. AF OUT r Mod. IN t NC y Horn drive cont. OUT u AF GND for P A, RX SP . function i Det. AF GND o Mod. GND ■ Antenna A key element i ...

  • Icom IC-F610 - page 33

    28 9 CLONING ‘ ‘ Cloning Cloning allows you to quickly and easily transfer the programmed contents from one transceiver to another trans- ceiver; or data from PC to a transceiver using the optional CS-F600(MPT) CLONING SOFTWARE . PC-to-transceiver cloning Please refer to the HELP file that comes with the CS-F600(MPT) CLONING SOFTWARE . CAUTION: ...

  • Icom IC-F610 - page 34

    29 10 OPTIONS SP-22 EXTERNAL SPEAKER Compact and easy to install. Input impedance: 4 Ω Max. input power: 5 W HM-100TN DTMF microphone. SM-25 Desktop microphone. UT -109/UT -1 10 (#02) VOICE SCRAMBLER UNIT • UT -109: Non-rolling type (max. 32 codes) Recommended for trunking mode. • UT -1 10: Rolling type (max. 1020 codes) Recommended both trun ...

  • Icom IC-F610 - page 35

    30 CE CE V ersions of the IC-F610 which display the “ CE ” symbol on the serial number seal, comply with the essential requirements of the European Radio and T elecommunication T erminal Directive 1999/5/EC. This warning symbol indicates that this equipment operates in non-harmonised frequency bands and/or may be subject to licensing conditions ...

  • Icom IC-F610 - page 36

    1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan A-6163H-1EU- w Printed in Japan © 2002 – 2005 Icom Inc. (MPT) < Intended Country of Use > GER AUT GBR IRL FRA NED BEL LUX ESP POR ITA GRE SWE DEN FIN SUI IC-F610_MPT-2.qxd 05.5.10 1:00 PM Page 36 (1,1) ...

Fabricant Icom Catégorie Two-Way Radio

Les documents que nous recevons du fabricant de l'appareilIcom IC-F610 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Icom
- manuels d’utilisations IC-F610
- fiches produit Icom
- dépliants
- ou étiquettes-énergie Icom IC-F610
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Icom IC-F610.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Icom IC-F610, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Icom IC-F610. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Icom IC-F610.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Icom IC-F610, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Icom IC-F610 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Icom IC-F610.

Le manuel d’utilisation complet Icom, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Icom IC-F610 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Icom IC-F610, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lIcom IC-F610 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Icom IC-F610 - qui devraient nous aider dans les premières étapes lors de l'utilisation Icom IC-F610
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Icom IC-F610
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Icom IC-F610 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Icom IC-F610?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Icom IC-F610, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Icom IC-F610 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)