Français dropdown-ico

Manuel d’utilisation Hunter 44459

40 pages 0.29 mb
Télécharger

Aller à la page of 40

Summary
  • Hunter 44459 - page 1

    Owner’ s Manual Model 44459 File: AJ570/41383 book p. 1-19/art Created: 9-28-98 db Folder: AJ570/Hunter/41383 Alt: 2-2-99 db Prints black SINCE 1 8 8 6 ® AUTO SA VER 459 P AGE 1 5: 7 2 2 2 3 B99A p1-19 2/7/03 9:58 AM Page 1 ...

  • Hunter 44459 - page 2

    Ask Y our Local Retailer for Other Quality Pr oducts fr om Hunter T o locate your nearest Hunter Dealer , call 1-800-4HUNTER, or visit The Hunter Fan Co. website: www .HunterFan.com. Fans Air Purifiers Humidifiers P AGE 2 B99A p1-19 2/7/03 9:58 AM Page 2 ...

  • Hunter 44459 - page 3

    Introduction Model Information: Model Number ____________________________________ Serial Number _____________________________________ Date Purchased____________________________________ Where Pur chased ___________________________________________________________ CONGRA TULA TIONS! Y our new Hunter electronic thermostat will provide years of reliable ...

  • Hunter 44459 - page 4

    T able of Contents Read This Before Installing Thermostat 6 Features 8 What Y ou Need 10 Remove Old Thermostat 10 Wire Labeling 11 Mount Wallplate and Thermostat 12 Selector Switches 14 Setting Time and Day 16 Auto Programming 17 Personal Program Schedule 18 Manual Programming 19 W eekday Programming 19 Saturday and Sunday Programming 21 Reviewing ...

  • Hunter 44459 - page 5

    OPERA TIONS ( continued) SAFETY FEA TURES TROUBLESHOOTING WIRING DIAGRAMS T emporary Manual Override 24 Permanent Manual (V acation) Override 25 Auto Season Changeover 26 Home T oday 26 Energy Monitor 28 Filter Monitor 29 Auto Recovery 30 Keyboard Lock 31 Backlighting 31 Low Battery Warning 32 Error Mode 33 Auto Cut-Off 33 Problems & Solutions ...

  • Hunter 44459 - page 6

    IMPORT ANT 1 Read the entire installation section of this Owner’ s Manual thoroughly before you begin to install or operate your Hunter Thermostat. REMOVE THE MYLAR LABEL FROM THE LCD DISPLA Y WINDOW. INST ALLA TION 2 All installation is normally performed at your thermostat. ARMCHAIR PROGRAMMING 3 Y ou can program your thermostat before installa ...

  • Hunter 44459 - page 7

    P AGE 7 Read This Before Installing Thermostat (continued) POWER F AILURE 7 W henever the main power is interrupted or fails, the battery power retains the programs and current time. AUTO RECOVERY 8 Y our thermostat is set from the factory to gradually recover the room temperature fr om an energy saving pr ogram to your comfort program. Therefor e, ...

  • Hunter 44459 - page 8

    P AGE 8 Features HOME TODA Y : Overrides energy- saving program temperatures while you are at home for the day . ENERGY : Measures and displays heating and cooling system operating time for T oday , Y esterday , This W eek, Last W eek, or T otal. By monitoring your energy usage, you can program the thermostat to optimize energy savings. T emperatur ...

  • Hunter 44459 - page 9

    P AGE 9 Provides permanent temperature setting by overriding stored programs. It also returns the thermostat to current program control fr om manual override or Home T oday mode. For entering minute of day . Enters Program Mode for reviewing and changing weekday or weekend programs. Selects the day or days to review or change in Program Mode. Retur ...

  • Hunter 44459 - page 10

    P AGE 10 10-11 INST ALLA TION This thermostat includes two #8 slotted screws and two wall anchors for mounting. T o install your thermostat, you should have the following tools and materials. ■ Slotted Screwdriver(s) ■ Phillips Screwdriver ■ Hammer ■ Electric drill and 3/16" bit ■ T wo 1.5 V (AA) size alkaline batteries What Y ou Nee ...

  • Hunter 44459 - page 11

    P AGE 11 ■ Each wire coming from the wall to the existing thermostat is connected to a terminal point on that thermostat. Each of these terminal points is usually marked with a code letter as shown in T able A on this page. ■ The number of wires in your system can be as few as two (for heat only systems), as many as eight, or any number in betw ...

  • Hunter 44459 - page 12

    P AGE 12 ■ Remove the wallplate from your thermostat by pressing the release tab on the bottom of the thermostat. (See Figure 2.) ■ Position wallplate on wall and pull existing wires through lar ge opening. Then level for appearance. Mark holes for plastic anchors provided if your existing holes do not line up with those on the Hunter wallplate ...

  • Hunter 44459 - page 13

    P AGE 13 ■ Match and connect the labeled wires to the appropriate coded terminal screws on the mounting plate. (See Figure 4, 5.) Ignore any wir es which may be present, but which were not connected to the old thermostat. ■ Be sure to tighten the terminal screws securely , otherwise a loose wire could cause operational problems with your system ...

  • Hunter 44459 - page 14

    In order for this Hunter thermostat to control your system, the system type must be specified by selector switches on the printed circuit board inside the thermostat. Ther e are also other selector switches that allow you to customize the features to suit your needs. NOTE: When changing these features after installation, move the HEA T / COOL selec ...

  • Hunter 44459 - page 15

    P AGE 15 Switch Setting Switch Function Alternate Standard SW 5 F° / C° Celsius Fahrenheit SW 6 12 Hr . / 24 Hr . 24 Hour 12 Hour SW 7 Span +2°F / –1°F +1°F / –1°F SW 8 Auto Recovery Disable Enable T able B Feature Selector Switches: ■ F° / C° selector (Fahrenheit / Centigrade) – Switch 5 Y our thermostat is set for F° mode from th ...

  • Hunter 44459 - page 16

    P AGE 16 16-17 PROGRAMMING Remove the mylar label covering the LCD display window before operating thermostat. Setting Time and Day HOUR MIN DA Y RETURN EXAMPLE: Set the thermostat to the current time of 9:43 a.m. on Saturday . Refer to Figure at right. ■ During time and day setting mode, the temperature and program displays will go blank. ■ Pr ...

  • Hunter 44459 - page 17

    P AGE 17 Studies conducted by the Department of Ener gy estimate that setting your thermostat back 10°F (6°C) for two 8-hour periods during winter can reduce your fuel bill by as much as 33%. By setting your thermostat up 5°F (3°C) for two 8-hour periods during summer you can reduce your fuel bill up to 25%. Y our thermostat is capable of holdi ...

  • Hunter 44459 - page 18

    P AGE 18 18-19 PROGRAMMING Personal Program Schedule Day Program 1 Program 2 Program 3 Program 4 Mon. Time Time Time Time - Fri. T emp T emp T emp T emp Sat. Time Time Time Time T emp T emp T emp T emp Sun. Time Time Time Time T emp T emp T emp T emp Heating Program 1 Program 2 Program 3 Program 4 Time Time Time Time T emp T emp T emp T emp Time Ti ...

  • Hunter 44459 - page 19

    ■ Y our thermostat can be programmed for weekdays and for Saturday and Sunday . Use the Programming steps below to enter or revise programs to match your Personal Pr ogram Schedule. The same steps are used when entering programs for the first time, or revising programs enter ed during Auto Programming. ■ When batteries are first installed, the ...

  • Hunter 44459 - page 20

    20-21 PROGRAMMING Weekday Pr ogramming (cont.) Step 3 Step 5 ■ If you desire only weekday programs, press to r eturn to normal mode. ■ After 15 seconds, the thermostat will return to normal mode automatically . RETURN Step 6 ■ Change the System Selector Switch to the other system, and repeat Steps 2 through 5 above. File: AJ570/41383 book p. ...

  • Hunter 44459 - page 21

    Step 2 ■ Press to enter program mode, display shows weekday programs. ■ Press to reach the Saturday pr ograms. PROG Step 3 PROG DA Y Step 5 ■ Press to change to the Sunday programs. ■ Repeat Steps 3 and 4 to complete the Sunday programs. Step 6 ■ When finished press to return to normal mode. ■ After 15 seconds, the thermostat will retur ...

  • Hunter 44459 - page 22

    Y ou may want to review the programs to confirm that the settings are compatible with your lifestyle. 22-23 PROGRAMMING Reviewing Programs Weekday Programs ■ Press to display M – F programs. ■ Press repeatedly to cycle through the 4 programs. PROG Weekend Programs ■ Press repeatedly to cycle through the 4 programs. PROG ■ Press to display ...

  • Hunter 44459 - page 23

    ■ Current time and temperature. ■ Thermostat is set to AUTO, and the heating system is on. ■ Press for 1 second or less. ■ Set T emperature is shown above current room temperature. ■ If held for over 1 second, T emporary Manual Override mode is entered. Refer to the next page. NOTE: Programs take affect as soon as the thermostat r eturns ...

  • Hunter 44459 - page 24

    The System Selector switch on the fr ont of the thermostat determines the operating mode of the thermostat. Y ou may select COOL, OFF , HEA T , AUTO. In order to take full advantage of this thermostat’ s features, we recommend using the AUTO mode. Refer to the Auto Season Changeover information on page 26. NOTE: Anytime you install or remove the ...

  • Hunter 44459 - page 25

    T o end the T emporary Manual Override: NOTE: The Auto Season Changeover feature will not operate while the thermostat is in T emporary Manual Override. Refer to the Auto Season Changeover feature on page 26 for more information. NOTE: If the thermostat has not been programmed, then a T emporary Override becomes a Permanent Override. See the next s ...

  • Hunter 44459 - page 26

    When the System Selector is in AUTO position, the thermostat will automatically change between Heating and Cooling systems, depending on your program. W e recommend keeping your programmed heating and cooling temperatures at least 4°F (2°C) apart to allow the Auto Season Changeover to occur when the appropriate temperature span has been r eached. ...

  • Hunter 44459 - page 27

    ■ Press to exit Home T oday mode before the schedule ending time. “HOME” is no longer displayed on the LCD screen, and the thermostat returns to the current program. HOLD CLEAR HOME TODA Y HOME TODA Y ■ If Home T oday is already active, you may similarly extend it to the first program of the next day by pressing the key again after the star ...

  • Hunter 44459 - page 28

    72 . 7I . 70 . 28-29 OPERA TION Energy Monitor ENERGY ENERGY ■ Press and hold for 3 seconds to reset the Ener gy Monitor’ s counters. The display will blink, and all counters will be cleared to zero. NOTE: Clearing the Energy Monitor counter will also clear the Filter Monitor counter , as Filter usage and T otal Energy usage are the same. Also, ...

  • Hunter 44459 - page 29

    Y our thermostat also keeps a record of the number of hours your filter has been in use. T o maximize your system’ s performance a nd energy efficiency , change or clean your filter regularly. NOTE: Clearing the Filter Monitor counter will also clear ALL Energy Monitor counters, as Filter usage and T otal Energy usage are the same. Also, clearing ...

  • Hunter 44459 - page 30

    72 . 7I . 70 . 30-31 OPERA TION Auto Recovery Hunter’ s Auto Recovery feature meets the E NERGY S TA R ® guidelines for energy efficiency by allowing the heating or cooling system to recover gradually from an energy-saving setpoint temperature to a comfort setpoint temperature. Auto Recovery calculates how early to turn your system back On, so t ...

  • Hunter 44459 - page 31

    Backlighting (INDIGLO ® night-light) ■ Press the Light Bar on the left side of the thermostat to illuminate the display . ■ The display will remain illuminated for 5 seconds after the last key is pressed. This allows the light to stay on if you need to operate several keys. Note: If the thermostat is in Low Battery warning condition, the backl ...

  • Hunter 44459 - page 32

    When the batteries become too weak for normal operation, the thermostat enters the second stage low battery warning which shuts down the thermostat. In this condition, “BA TT” flashes alone on the display , and the thermostat will tur n your system Off. Y our system will remain shut-off until the batteries ar e replaced. NOTE: The thermostat wi ...

  • Hunter 44459 - page 33

    If the thermostat is unable to control your system due to an unexpected battery problem, the thermostat will enter Error Mode. In this condition, the thermostat flashes “ERR-” on the LCD display , and shuts off your system. T o correct this problem, replace the batteries with 2 new AA alkaline batteries, even if you have recently replaced them. ...

  • Hunter 44459 - page 34

    34-35 TROUBLESHOOTING Problem Solution SCRAMBLED OR DOUBLE DISPLA Y (numbers over numbers) NO DISPLA Y ENTIRE DISPLA Y DIMS PROGRAM DOES NOT CHANGE A T YOUR DESIRED SETTING AUTO / F AN DOES NOT TURN ON HEA TING OR COOLING DOES NOT GO ON OR OFF 1. Remove clear mylar sticker 1. Check battery connections and batteries. 2. Press RESET button with a sma ...

  • Hunter 44459 - page 35

    Solution (cont.) ERRA TIC DISPLA Y IF UNIT CONTINUES TO OPERA TE IN THE OFF POSITION THERMOST A T PERMANENTL Y READS “HI,” “LO,” OR “ERR-” AFTER PRESSING RESET BUTTON 1. Press the RESET button once with a small pin and hold for two seconds. The thermostat will need to be re-programmed. 1. Replace unit. 1. Replace unit. If you experience ...

  • Hunter 44459 - page 36

    36-37 WIRING DIAGRAMS 5-wire Heat/Cool System X - No Connection THERMOST AT G W Y RH RC Heat Relay or Valve Heat 24V Supply Fan Relay Cool Contactor Cool 24V Supply THERMOST AT G W Y RH RC Heat/Cool 24V Supply Fan Relay Heat Relay or Valve Cool Contactor Jumper 4-wire Heat/Cool System X O/B X O/B B99A p30-40 2/7/03 9:59 AM Page 7 ...

  • Hunter 44459 - page 37

    Single-stage Heat Pump THERMOST AT G W Y O/B RH RC Heat Pump 24V Supply Fan Relay Compressor Contactor Reversing Val v e Jumper X - No Connection O/B 2-wire Heat Only THERMOST AT G W Y RH RC Heat Relay or Valve Heat 24V Supply X X X X X B99A p30-40 2/7/03 9:59 AM Page 8 ...

  • Hunter 44459 - page 38

    3-wire Cool Only 3-wire Heat Only THERMOST A T W RH RC Heat Relay or Valve Heat 24V Supply Fan Relay THERMOST A T G W Y RH RC Cool Contactor Fan Relay Cool 24V Supply G Y O/B O/B 38-39 WIRING DIAGRAMS X - No Connection X X X X X X Jumper B99A p30-40 2/7/03 9:59 AM Page 9 ...

  • Hunter 44459 - page 39

    B99A p30-40 2/7/03 9:59 AM Page 10 ...

  • Hunter 44459 - page 40

    © 2003 Hunter Fan Company 41610-01 2/03 Hunter Fan Company 2500 FRISCO AVENUE MEMPHIS, TN 38114 ® B99A p30-40 2/7/03 9:59 AM Page 11 ...

Fabricant Hunter Catégorie Thermostat

Les documents que nous recevons du fabricant de l'appareilHunter 44459 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Hunter
- manuels d’utilisations 44459
- fiches produit Hunter
- dépliants
- ou étiquettes-énergie Hunter 44459
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Hunter 44459.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Hunter 44459, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Hunter 44459. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Hunter 44459.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Hunter 44459, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Hunter 44459 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Hunter 44459.

Le manuel d’utilisation complet Hunter, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Hunter 44459 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Hunter 44459, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lHunter 44459 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Hunter 44459 - qui devraient nous aider dans les premières étapes lors de l'utilisation Hunter 44459
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Hunter 44459
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Hunter 44459 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Hunter 44459?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Hunter 44459, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Hunter 44459 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)