Français dropdown-ico

Manuel d’utilisation EverFocus EDR1620

77 pages 1.14 mb
Télécharger

Aller à la page of 77

Summary
  • EverFocus EDR1620 - page 1

    INSTRUCTION MANUAL Digital Sixteen/Nine Channel Video Recorder About this manual Before installing and using this unit, please read this Man ual carefu lly. Be sure to keep it handy for l ater reference. V 1.0 EDR1640/1620/920 Date: Sep . 30th 2005 ...

  • EverFocus EDR1620 - page 2

    Important Notice: Do not remove the ha rd disk while machin e is recording. Or stop first before remo ving the hard disk. Updated on Oct 20 th , 2005 ...

  • EverFocus EDR1620 - page 3

    WARNING TO REDUCE RISK OF FI RE OR ELE CTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE . CAUTION DO NOT REMOVE COVER. NO USER SE RVICEABLE PARTS IN SIDE. REFER SER V ICING TO QUALIFIED SER VICE PERSONNEL. Note: This equipmen t has been tested and found to co mply with the limits for a Clas s A digi tal device, The changes or mod ifica ...

  • EverFocus EDR1620 - page 4

     Refer all work related to th e installation of this product to qualified service personnel or system installers.  Do not block the ventilation opening or slots on the cover.  Do not drop metal l ic parts through sl ots.This coul d permanent l y damage the appliance. Turn the power off i mmediately and contact qualified service personnel f ...

  • EverFocus EDR1620 - page 5

    The exclamation point within an equila teral triangle is intended to alert the user to presence of important operating and maintenance(servicing)instructions in the literature accompanying the applianc e. Warning : To prevent fire or shock ha zard, do not expose units not specifically designed for outdoor use to rain or moisture. Safety Precautions ...

  • EverFocus EDR1620 - page 6

    Important Safeguards Read Instruction ---All the safety and operating instructions should be read before the unit is operated. Retain Instructions ---The safety and operating instructions should be retained for future reference. Heed Warnings —All warnings on the unit and in the opera ting instructions should be adhered to. Follow Instructions ? ...

  • EverFocus EDR1620 - page 7

    Table of Contents 1. PRODUCT INTRODUCTION ……… ………………………………………… …… …….………… 1.1 FEATURES ……… ………………………………… ………… ……………..…………..……… …. 1.2 SPECIFI CATIONS… ……………… ………… …… ……………… ………… …… ...

  • EverFocus EDR1620 - page 8

    Table of Contents 5. PLAYING BACK……… ………… …………..………………………………… …………..………... 5.1 NORMAL PLAY BACK……………….……………………… …… ………………………………… 5.2 SEARCH PLAYBACK ……………… ………… ……………… …… …….…… ……? ...

  • EverFocus EDR1620 - page 9

     Multiplex Operation (Recording, Playba ck, Archiving, Remote Viewing)  Built-in MPEG4 Codec with Configurable Quality  EDR1640: Variable Recording Speeds Up to 480/400(CIF) Pictures per second for NTSC/PAL  Audio Recording Capabilities  Motion Detection Capabilities  Two 3.5 ” Hot-Swap Hard Disks  SCSI Interface for Extern a ...

  • EverFocus EDR1620 - page 10

    1.2 SPECIFICATIONS 9 V ideo F or mat NTSC/EIA or P AL /CCIR V ide o Input 16 camera inputs (BNC), 1Vp-p/75ohm 1 BNC video out (1Vp-p/75ohm)and S-V ideo out for Main Monitor 1 BNC video out (1Vp-p/75ohm) for CALL Monitor V ide o Output 16 video out (1Vp-p/75ohm) for Lopping V ideo Compr ession MPEG4 720x480 (NTSC:120) / 720x576 (P AL :100) 720x240 ( ...

  • EverFocus EDR1620 - page 11

    10 RS-232 9-pin female connector f or local communication RS-485 For Keyboard and PTZ connection Audio 4 mono input, 1 mono (SPEAKER) output Powe r Sour ce AC100~240V±5% ...

  • EverFocus EDR1620 - page 12

    1.3 FRONT PANEL KEYPADS KEY 11 2 3 4 7 6 5 8 REC: Press this key to start instant recording. STOP: Press t his key to st op recording and play ing back. PLAY: Play Back. PAUSE: Press this key to pause the playback picture. SEARCH: Press t his key to enter the SEARCH MENU . COPY: Press this key to start to copy a still picture under PAUSE mode or v ...

  • EverFocus EDR1620 - page 13

    12 SEQ : Press this key to enter the auto sequen tial switching mode. 12 13 14 CALL: Press this key to enter and set up CA LL MENU . MENU: Press this key to enter or quit MAIN SETUP MENU . 10 11 MODE: Switc h PI P , 4, 7, 9, 10, 13 and 16 dis pl a y s in Live and Pl ayback modes . ZOOM: Press this key whi le viewing the full screen im age to displa ...

  • EverFocus EDR1620 - page 14

    15 Shuttle and J og Dial Shuttle: In the Playback mode, turn t he Shuttl e dial to fast forward/rewind the video. In the Pause mode, tur n the Shuttle dial to sl ow forward/rewind the video. In the Search mode, turn the Shuttle to change pages. Jog Dial: In the Pause mode, turn the Jog dial to forward/rewind t he video. In the Menu mode, turn the J ...

  • EverFocus EDR1620 - page 15

    Audio IN : Audio input s 1~4 for recording, and it can be s et to “ YES ”o r “ NO ”i n t h e RECORD SETUP MENU. Audio OUT: Connect an audio o utput to a monitor or other device. AUDIO 1 2 1.4 BACK PANEL CONNECTORS Main Po wer plug: Connect the DC 12~ 24V power sour ce to adapter for AC 100~ 240V. POWER MAIN MONITOR: Thi s connector is used ...

  • EverFocus EDR1620 - page 16

    For EDR1640/1620 Series: VIDEO OUT(1~16 ): BNC connectors for video l ooping out 1~16. VIDEO IN(1~16): BNC connectors for video i nput 1~16 . VIDEO IN 5 ALM-INPUT: Normal open or normal clos e type alarm signal inputs. The Alarm Input can be selected as normal open ( N.O. ) or norm al close ( N.C. ) input in the ALARM SETUP MENU . When an alarm occ ...

  • EverFocus EDR1620 - page 17

    FAN: Cooli n g FA N. 10 Wireless LAN (Reserve d) 16 Matrix outputs 1~ 4: BNC connect ors for Matrix outp uts 1~4. 11 Matrix Outpu ts SCSI Connecto r : For connecting the o ptional extension unit. 12 SCSI Connecto r Mouse: For connecting the mouse. 13 Mouse S-Video: provi ding S-Vi deo connector. 14 S-Video Cascade is desi gned for connecting a num ...

  • EverFocus EDR1620 - page 18

    1.5 MONITOR DISPLAY 1. Channel tag 2. Event sig n 3. Select sign 2. Event sig n 4. Play status bar 5. Record status bar 2 Channel t ag: A channel tag indicates the channel name of the screen. Event sign: Event signals which are small icons wit h a capital letter and red background sh ow the events on each screen. There ar e 4 different signals whic ...

  • EverFocus EDR1620 - page 19

    3 4 Select sign: You can assign a camera to a display by pressing SELECT key in live mode. Dial Jog to move the select sign to the displ ay you would l ike to change camera, and then press channel key from the Chann el Panel to relocate the c amera. Play status b ar: The play stat us bar appears in play back mode i f you enable a status ba r on the ...

  • EverFocus EDR1620 - page 20

    1. Current date: The current date which is set in the TIME /DATE SETU P ME NU . 2. Record status: It shows R EC and recording hard dis k number. “ REC ” , it shows when machine is re co rding. “ R01 ”, the recording hard disk num ber. Ther e is only one hard disk available in this m odel, so it alway s shows R01 when recording. 3. Event: Th ...

  • EverFocus EDR1620 - page 21

    The installations described below shoul d b e done by qualified service person nel or system installers. 2.1 PACKING LIST 2. INSTALLATION Please check acce ssories in t he packing be fore the inst allation . Camera (VIDEO & AUDIO) Monitor (and Speaker) Internet Alarm (In & Out) RS 232 Please refer to the following diagram for the system con ...

  • EverFocus EDR1620 - page 22

    (1) Insert a HDD (ID E) for Video Storage Insert a HDD(IDE) for Video Storage. The HDD shou ld be set as MASTER. After hard di sk case is inserted into t he hard disk tray, be sure to turn the tray key in lock p osition. Otherwise, HDD wil l not be detected. Note: A HDD has to be installed b ef ore EDR1640/1620 /920 is booted, or the EDR1640/1620/9 ...

  • EverFocus EDR1620 - page 23

    3. MENU SETUP 3.1 TIME / DATE SETUP MENU MENU Press MENU key to enter the MAIN MENU . Press MENU key or click on the arrow at the top right corner of the screen with a mouse to quit cu rren t setting, and go back to last setting. Dial the Jog clockwise or countercl ockwise to change subentry values. Press the ENTER key to go next subentry in a menu ...

  • EverFocus EDR1620 - page 24

    In the TIME/ DATE SETUP MENU, we define : (1) TIME FORMAT: There are two time formats that are 12 HOUR and 24 HOUR to be selected. (2) TIME: Current tim e Hour: 00 ~ 23 (1 ~ 12 if TIME FORMAT is 12 HOUR ) Minute : 00 ~ 59 Second: 00 ~ 5 9 (3) DATE F ORMAT: There are three date formats which ar e YYYY-MM-DD , MM-DD-YYYY and DD-MM- YYYY to be selecte ...

  • EverFocus EDR1620 - page 25

    LAST To set the start week of d aylight sa ving time: Dial the jog to set the start week. 1 ST 2 ND 3 RD 4 TH To set the start date of dayli ght savi ng time: Dial the jog to set the start date. THU SUN FRI TUE MON WED SAT To set the start month of dayli ght savin g time: Dial the jog to set the start month. FEB MAR JAN APR MAY JUN DEC NOV OCT SEP ...

  • EverFocus EDR1620 - page 26

    (8) TIME SY NCHRONIZE: Select “ ON ”o r “ OFF ” to enable or dis able time synchro nize which can let you have correct time automatically when n etwork is conn ected. (9) TIME SE RVER: You can set the time server address where you lo cate if you conn ect to network and enable time synchronize. For checking the IP address of NTP Server, plea ...

  • EverFocus EDR1620 - page 27

    3.2 CAMERA SETUP MENU In the CAMERA SETUP MENU, we define : (1) TITL E: The title setting allows you to assign a title to each c amera input. Titling with 12 characters is supported in ea ch channel. The available alphanumeric characters are: 0,1,2,3, 4,5,6,7, 8,9, A,B,C,D,E ,F,G,H,I,J,K,L,M,N, O,P,Q,R, S,T,U,V,W,X,Y,Z, ( ) . , + - / and an em pty ...

  • EverFocus EDR1620 - page 28

    (6) REC SPEED ON TIME ZONE: TP : The TP 1~8 are sch eduled record ing time which can be set in the SCHE DULE SETUP MENU . “N” in the colum n of “TP” is the normal record in g time. NORMAL : N ormal record speed (Images per second) up to 30 IPS. EDR16 40/1620/920 wi ll adjust to the maximum recording speed by calculating the total installed ...

  • EverFocus EDR1620 - page 29

    (7) SUMMARY : Dial Jog to change items in the SUMMERY table. All camera’s statuses are shown in the SUMMARY t able. The table is for checki ng camera overall statuses only, not for setting. You can check the following statues: “Title”, “Install”, “Covert”, “SEQ (Main/Call)”, “Quality”, “TP1~8 Normal Speed ” and “TPN Norm ...

  • EverFocus EDR1620 - page 30

    3.3 RECORD SETUP MENU In the RECORD SETUP MENU, we define : (1) RECORD AUDIO: YES: Audio will be recorded when machine is recording. NO: Audio will not be recor ded when machine is recording. (2) TIME S TAMP: ON: The time stamp will show on the vi deo and picture when recording. OFF: The time stam p will not show on t he video and picture when reco ...

  • EverFocus EDR1620 - page 31

    (6) RECORD MODE: REWRITE: Continue recording. Disk will be overwritten when it is full. STOP: Stop recording when disk i s full. 30 ...

  • EverFocus EDR1620 - page 32

    3.4 ALARM SETUP MENU In the ALARM SETUP MENU, we define : (1) ALARM: ENABLE: Enable alarm detection. DISABLE: Disable alarm detection. (2) ALARM TY PE: N. O. : Norm al Open alarm. N.C. TRANS. : When th e alarm is triggered, buzz er starts to function no matter how long is the alarm duration set until you set it back to N.C. N.O. TRANS . : When th e ...

  • EverFocus EDR1620 - page 33

    (4) RE TRIGGER: Re-trigger the alarm. YES : The duration time starts when an alar m is triggered. The duration time restarts fro m 0 when a new alarm is triggered during an alarm action. NO : The alarm signal wi ll not b e triggered again durin g duration tim e. (5) DURATION: Buzzer noise and event record d uration of an alar m, from 1 sec t o 99 s ...

  • EverFocus EDR1620 - page 34

    (12) MATRIX MON 1: Di splay on matrix monitor 1 when an alarm occ urs. NO CHANG E : Nothing ch anges on the di sp lay in the ma trix monitor 1 when an alarm occurs. CAMERA 1~16: Display an assigned camera in full screen mode to the mat rix monitor 1. (13) MATRIX MON 2: Di splay on matrix monitor 2 when an alarm occ urs. NO CHANG E : Nothing ch ange ...

  • EverFocus EDR1620 - page 35

    3.5 MOTION SETUP MENU In the MOTION SETUP MENU, we define : (1) MOTION: ENABLE: Enable motion detectio n. DISABLE: Disable m otion detection. Note: Motion only works in live and playback modes. It is invalid when yo u are setting menus. (2) SENSITIVI T Y: The sensitivity allows users to adjust to a suitable motion detection sensitivity. There are 1 ...

  • EverFocus EDR1620 - page 36

    (6) EMAIL/NETW OR K: YES: Send an email / Enable alarm network when an alarm occurs. NO: Do not send an email / Disable al arm network when an alarm occurs. The email address and e-mail server can be set in the NETWORK SETUP MENU. (7) BU ZZER: Motion buzzer. ENABLE: To enable a m otion buzzer. DISABLE: To di sable a mot ion buzzer. (8) MAIN MON: Di ...

  • EverFocus EDR1620 - page 37

    (13) MATR IX MON 4: Display on m atrix monitor 4 when an alarm occurs. NO CHANG E : Nothing ch anges on the di sp lay in the ma trix monitor 4 when an alarm occurs. CAMERA 1~16: Display an assigned camera in full screen mode to the mat rix monitor 4. (14) SUMMARY: Dial Jog to change ite ms in the SUMMERY table. All m otion’s statuses are shown in ...

  • EverFocus EDR1620 - page 38

     To test a motion area: Grids will turn into light red from light green when a motion is dete cted.  To clean up the entire area: Press PLAY to clean up the entire motion area.  To get a motio n area setting hin t: Press CALL to get a hi nt window (sh ows below) in m otion edit mode. MENU COPY ENTER SEARCH PAUSE -E X I T - SELECT AREA - CH ...

  • EverFocus EDR1620 - page 39

    3.6 VLOSS SETUP MENU In the VLO SS (Video Lo ss) SETUP ME NU, we define : (1) VLOSS: ENABLE: Enable video l oss detectio n. DISABLE: Disabl e video loss detection. (2) DURATION: Buzzer noise and event record d uration of an alar m, from 1 sec t o 99 seconds. The default value i s 5 seconds. (3) ALARM OUTPU T: The setting of alar ms which ar e NONE, ...

  • EverFocus EDR1620 - page 40

    (6) ALARM N ETWORK: YES: Enable alarm network. NO: Disable alarm network. (7) SUMMARY: All video l oss’s statuses are shown in SUMMARY table. This table is on ly for checking vi deo loss overall statuses, not for setting. 39 ...

  • EverFocus EDR1620 - page 41

    3.7 NETW O RK SET UP MENU Please Note: Since every Network Co nfiguration is different, please contact your Network Adm inistrat or or ISP for how to assign those IP addresses and port num bers. In CONFIG of the NETWORK SETUP MENU, we define : (1) DHCP: Enable or disable the Dynam ic Host Com munication Protocol. YES: Enable DHCP service. NO: Disab ...

  • EverFocus EDR1620 - page 42

    (6) HTTP PORT: The defaul t port num ber is 80. User can change it to different port num ber for HTTP/WEB com municat ion between DVR and cli ent PC. (7) CONTROL PORT: The default port num ber is 1600. User can change it t o different port number for Co ntrollin g comment between DVR and client PC . (8) DATA POR T: The default data t ransmitting po ...

  • EverFocus EDR1620 - page 43

    (4) SERVER 1 : assign t he IP address of Alarm server 1. (5) SERVER 2 : assign t he IP address of Alarm server 2. (6) SERVER 3 : assign t he IP address of Alarm server 3. 3.7.3 EMAIL In the ALARM of the NETWORK S E TUP MENU, we define : (1) SMTP SERVE R: assign the SMTP (e-mail) server’s IP address. (2) PORT NUMBER: assign the port number for SMT ...

  • EverFocus EDR1620 - page 44

    3.7.4 PASSWORD In the PASSWORD of the NE TWORK SETUP M ENU, we define : (1) NAME: assi gn the l ogin name for remote accessi ng. (2) PASS WORD: assign the passwor d for remote acces sing. (3) LEVEL: assi gn the accessi ng Right /Priori ty of that l ogin use r PLAY: User is allowed to pl ayback the video. LIVE: User is allowed to view live mode. 43 ...

  • EverFocus EDR1620 - page 45

    3.8 SCHEDULE SE TUP MENU In the SCHE DULE SETUP MENU, we define : (1) DAY: MON (Monday), TUE (Tuesday), WED (Wednesday), THU (Thursday), FRI (Friday), SAT (Saturday), SUN (Sunday). WDAY: Weekday, from Monday to Friday. WEND: Weekend, Saturday and Sunday. DLY: Daily. (2) START: The start time of a scheduled record time zone. Hour: 0 ~ 23 in 24 hour ...

  • EverFocus EDR1620 - page 46

    3.9 DISK SETUP ME NU In the DISK SETUP MENU , we define : (1) DISK INFORMATIONS: Select disks, there are 4 disks in e ach ta ble. A maxim um of 40 di sks is available for this model. (2) DISK V IDEO DELE TE: The disk y ou want to delete. Press SELECT to start delete. A delete disk confirmation window will show up after pressing SELECT button or til ...

  • EverFocus EDR1620 - page 47

    3.10 CONTROL SETUP MENU In the CONT RO L S E T UP MENU, we define : (1) RS 232: BAUD RATE: There are 5 different speeds that can be used to transmit instruction or informati on through the RS232 port on the device, which are 2400, 4800, 9600, 19200, 38400 and 57600 BPS. The defau lt setting from the factory is 9600 BPS. STOP BIT: Select stop bit : ...

  • EverFocus EDR1620 - page 48

    (2) RS 4 85: BAUD RATE: There are 5 different speeds that can be used to transmit instruction or informati on through the RS232 port on the device, which are 2400, 4800, 9600, 19200, 38400 and 57600 BPS. The defau lt setting from the factory is 9600 BPS. STOP BIT: Select stop bit : 1 or 2 . PARITY: Select parity level : NO NE, ODD or EVEN . DATA BI ...

  • EverFocus EDR1620 - page 49

    3.11 WARNING SETUP MENU 3.11.1 FAN FAULT In Warning Setup Menu, you will be able to do warn ing setting when the following situations occur: In FAN FAULT , we define: (1) BUZZER : Fan buzzer. ENABLE: To enable a buzzer when the fan does not work. DISABLE: To disable fan buzze r. (2) ALARM OUTPUT: The setting of alarms which are NONE, 1, 2, 3 and 4. ...

  • EverFocus EDR1620 - page 50

    In HDD TEMP. , we define: (1) BUZZER : HDD TEMPERATURE buzzer. ENABLE: To enable a buzzer when HDD’s temperature is over 70 ° C . DISABLE: To disable HDD TEM P. buzzer. (2) ALARM OUTPUT: The setting of alarms which are NONE, 1, 2, 3 and 4. (3) ALARM DURATION: PE RMANENT (4) NETWORK ALARM: YES: To enable network alarm. NO: To disable network al a ...

  • EverFocus EDR1620 - page 51

    In NO HDD , we define: (1) BUZZER : NO HDD buzzer. ENABLE: To enable a buzzer when no HDD has been foun d. DISABLE: To disabl e NO HDD buzzer. (2) ALARM OUTPUT: The setting of alarms which are NONE, 1, 2, 3 and 4. (3) ALARM DURATION: B uzzer noise and event record duration of an alarm, from 1 sec to 99 seconds. The default value is 5 seconds. (4) N ...

  • EverFocus EDR1620 - page 52

    In HDD FULL , we define: (1) BUZZER : HDD FULL buzzer. ENABLE: To enable a buzzer when HDD is full. DISABLE: To disabl e HDD FULL buzzer. (2) ALARM OUTPUT: The setting of alarms which are NONE, 1, 2, 3 and 4. (3) ALARM DURATION: B uzzer noise and event record duration of an alarm, from 1 sec to 99 seconds. The default value is 5 seconds. (4) NETWOR ...

  • EverFocus EDR1620 - page 53

    3.12 SYSTEM SETUP MENU In the S YSTEM SETUP MENU, we define : (1) SYSTEM VERSION: Current system firmware version. (2) SYSTEM VIDE O FORMAT: NTSC or PAL System can d etect the input signal type automatically fro m camera 1 wh ile system is booting up. Users do no t need to set it up. Note: The signal type is detected by camera 1, so camera 1 input ...

  • EverFocus EDR1620 - page 54

    (5) LANGUA GE: Syst em language can be se t in different languages. Note: The available language depends on the different areas and countries. (6) QUICK PLAY: Set u p the start play t ime of the normal pl ay mode. TIME: Quick play time, 5 to 59 minutes ago. The default value is 10 minutes. ON: Enable quick play. The video played tim e is the immedi ...

  • EverFocus EDR1620 - page 55

    LEVEL-3 LEVEL-2 LEVEL-1 N O N E ACCES S A DMI NI S T RA T O R O P E RA T O R G E NE RA L - - - - DI SP L A Y OK OK OK OK MO DE OK OK OK OK ZO O M OK OK OK OK S ELEC T OK OK OK N O SE Q OK OK OK N O CALL OK OK N O N O ME N U O K NO NO NO COPY O K NO NO NO S EAR CH O K NO NO NO PLAY O K NO NO NO ST O P O K NO NO NO RE C O K NO NO NO P A U S E O KN ON ...

  • EverFocus EDR1620 - page 56

    4.1 INSTANT RECORDING When REC is pressed, the pictures being m onitored will be recorded in the HDD. •The recording rate, r ecording quality and rec ording speed can be set in the CAMERA SETUP MENU . •A “ RECORD ” sign appears in the record status bar. Press STOP key to stop instant recording. •T h e STOP key can be activat ed only in i ...

  • EverFocus EDR1620 - page 57

    Set up the DAY , START time, END time and then enable the SET in th e SCHEDULE SETUP MENU. Please refer to SCHEDULE SETUP MENU, to see sett ing procedure and more details. 4.2 SCHEDULE RECORDING 4.3 EVENT RECORDING We define two even t typ es which are ALARM and MOTION events can be recorded. After the event recording is enab led , the EDR1640/1620 ...

  • EverFocus EDR1620 - page 58

    2. After enabling an event, you n eed to set a time zone in the SCHEDULE SETUP MENU. An event recording has to be i ncluded in a scheduled tim e zone. You can refer to SCHEDUL E S E T UP MENU to set up a time zone which you woul d like to record when an event occurs. 3. When the event and schedule are set, you can enter the CAMERA SETUP MENU to set ...

  • EverFocus EDR1620 - page 59

    Press the PLAY key to start pl aying back the stor ed im age/audio. The video start time depends on th e immediat e play setting in the SYSTEM SETU P MENU . (1) Playback Press the STO P key to stop playing back. (3) Fast Forward/Reverse Playback Press the PLAY key to start playing back. Turn the Shuttle dial clockwise, to star t fast forward playba ...

  • EverFocus EDR1620 - page 60

    (4) Slow Forward/Reverse Playback During playback m ode, press PAUSE key to freeze the play ing back picture. Turn the Shuttle dial clockwise, to star t slow forward playback. The speed will show on the status bar of t he bottom screen. >> 1/2, 1/4, 1/8, 1/ 16, 1/32, and press ENTER at the same time to fasten the play speed. PAUSE (5) Image a ...

  • EverFocus EDR1620 - page 61

    5.2 SEARCH PLAYBACK (1) TIME / DATE Search Playback Press the SEARCH key to en ter the SEARCH ME NU . SEARCH In the SEARCH ME NU , Dial the Jog clockwise or countercl ockwise to change subentry values. Press the ENTER key to go next subentry i n search menu setti ng, and press the DISPLAY key to go last subentry in search menu setting. Press MENU t ...

  • EverFocus EDR1620 - page 62

    (2) EVENT Search Playback You can change different event search methods if you select “BY EVENT” instead of “BY TIME / DATE” . 7 events which are ALARM, MOTION, VLOS S, A/M, A/V, M/V an d A/M/V can be selected. The indications of events show below. Search all events (ALARM, MOTION and video loss) A / M / V Search MOTION and video loss event ...

  • EverFocus EDR1620 - page 63

    Insert a USB pocket driver i nto USB sl ot on the front panel to copy. USB SLOT: COPY Press COPY key and then the copy m enu appears. Digital Video Recorder allows users to select th e c amera for co p ying image to movie file or copying EDR Viewer player. Th e camera title will be displaying at the top of the scre en. 6. COPY TO A VIDEO FILE 62 ...

  • EverFocus EDR1620 - page 64

    In the COPY MENU , we define: COPY: Select Image for copying images to movie file. Select Viewer for copying EDR viewer player. DISK N O: Disk num ber. It is fixed as “01” in this series. CAMERA NO: Cam era number. You can select the video of camera you wou ld like to copy. START DATE & TIME: The start t ime of video you want to copy. END D ...

  • EverFocus EDR1620 - page 65

    7. CALL Press the CALL key and the CALL MENU will pop up as below. In the CALL MENU, we define : (1) SEQ: Sequence display o n the Call/Matrix monitor. Press SEQ to switch “ON” or “OFF” of the sequence status. (2) OSD: Ch annel name display on the Call/Matrix monitor. Press DISPLAY to switch “ON” or “OFF” of the OSD status. (3) CAME ...

  • EverFocus EDR1620 - page 66

    8. SCREEN DISPLAY SETTING In a full screen display, press SELECT key to pop up the display adjustment window as belo w: In the screen display setting menu , we d efine: (1) CAMERA: Th e display setting of the current ca mera. (2) BRIGHTNESS: The bright percentage of the current camera; from 0% to 100%. (3) CONTRAS T: The contrast percent age of the ...

  • EverFocus EDR1620 - page 67

    9. SCREEN DISPLAY MODE Press MODE to switch 4, 7, 9, 10, 13, 16 and PIP (pic ture in picture) displ ays for Live and Play back mode. 66 ...

  • EverFocus EDR1620 - page 68

    10. REMOTE VIEWER 67 Basic Operations and Logi n Di splay: Go to the Internet Explor er, key in the networ k IP address, for example, http://220.228.98.9 (mus t be the same IP address as the one assigned to the unit from the Network Setting Menu. please contact your ISP or MIS for the IP assign ment) The LOGIN dialog will be shown on the screen. Us ...

  • EverFocus EDR1620 - page 69

    68 Main Screen The above diagram is the main sc reen display. The icons on the lo wer corne r of the scr een are main ly for control and configuration, those on the right corne r are fo r status ind ication. If any icon is grayed, it means that the specific function is not accessible in the current mode. The follow ings are a b rief descr iption fo ...

  • EverFocus EDR1620 - page 70

    69 7. The system allows up to 3 ways to playback video , by EVENT LIST , Time and PTZ Control . (Playba ck by EVENT LI ST, click “Upd ate” button to show list) (Playba ck by PTZ Control) (Playba c k by Time) ...

  • EverFocus EDR1620 - page 71

    70 Search from EVENT LI ST : I. Select Event Type from Alarm , Motion and Vloss . II. Press Update button to ref resh the event l ist. III. All events of the selected type will be displaying along with Date/Time, event type (represents by a capital lette r), camera numbe r (represents by a number) , e.g. M02 is the motion event from camera 2. IV. C ...

  • EverFocus EDR1620 - page 72

    71 8. Events to be searched: Alarm , Motion and Vloss . 9. All available event s are shown in the list. Select the desired ev ent and it will be highlight e d. 10. Click on “ Play ” to playback selected video event. 11. Press “ Update ” to refresh the e vent list. 12. Current connection and pla yback status are shown a long with date and ti ...

  • EverFocus EDR1620 - page 73

    II. Select “ Run ”o r “ Save ” the file. III. Open the EDRViewer.exe for loadi ng the archived EDR MPEG Files (.arv) 72 ...

  • EverFocus EDR1620 - page 74

    APPENDIX RS232 The pin assignment of th e 9-pin D-SUB co nnector D-SUB 9-pin connector This Digital Video Recorder can be c ontroll ed by a computer or a terminal via a standard D-SUB 9-pin RS-23 2 connector. Transmission setting There are 6 different speeds that can be used to transmit ins truction or info rmation through the RS232 port on the dev ...

  • EverFocus EDR1620 - page 75

    APPENDIX B : RS-485 (RJ45) specifi cation s APPENDIX There are two RS-485 ( RJ-45) connectors of one por t on the back panel o f the DVR. Please refer to the followi n g pin a ssi g nm ent f or ap p licat io n. 1 2 3 4 5 6 7 8 PIN # NAME 1 2 3 5 4 6 7 8 GND NC NC NC NC NC RX TX 74 ...

  • EverFocus EDR1620 - page 76

    Alarm I/O pin assignment The alarm connector, Figure 1 , is used to provide one sensor ala rm input for each came ra input. For eas y operation, an alarm e xtension board, Figure 2 , is provided to connect to the ala rm connector. Each alarm input requires two wir es, one wire connects to the des ired alarm input pin, the second wire connects to th ...

  • EverFocus EDR1620 - page 77

    EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886-2-26982334 FAX: +886-2-26982380 www.everfocus.com.tw USA Office: 1801 Highland Ave. Unit A Duarte, CA 91010, U.S.A. TEL: +1-6 26- 844-8888 FAX: +1- 626-844-8838 www.everfocus.com European Office: Albert-Einstein-Strasse 1 D-46446 E mme ri ...

Fabricant EverFocus Catégorie DVR

Les documents que nous recevons du fabricant de l'appareilEverFocus EDR1620 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques EverFocus
- manuels d’utilisations EDR1620
- fiches produit EverFocus
- dépliants
- ou étiquettes-énergie EverFocus EDR1620
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation EverFocus EDR1620.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation EverFocus EDR1620, manuels d’entretien, brefs manuels ou manuels de l’utilisateur EverFocus EDR1620. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit EverFocus EDR1620.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil EverFocus EDR1620, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser EverFocus EDR1620 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs EverFocus EDR1620.

Le manuel d’utilisation complet EverFocus, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel EverFocus EDR1620 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières EverFocus EDR1620, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lEverFocus EDR1620 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil EverFocus EDR1620 - qui devraient nous aider dans les premières étapes lors de l'utilisation EverFocus EDR1620
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de EverFocus EDR1620
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service EverFocus EDR1620 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de EverFocus EDR1620?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec EverFocus EDR1620, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec EverFocus EDR1620 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)