Français dropdown-ico

Manuel d’utilisation Adder Technology SVMS2-QUAD

46 pages 2.7 mb
Télécharger

Aller à la page of 46

Summary
  • Adder Technology SVMS2-QUAD - page 1

    SMAR T V V i i e e w w MUL TISCREEN I N S T A L L A T I O N & U S E www .addertec.com SVMS4-QU AD 4 port Smar tView Multiscr een with 4 monitor connections SVMS4-DU AL 4 port Smar tView Multiscr een with 2 monitor connections SVMS2-QU AD 2 port Smar tView Multiscr een with 4 monitor connections SVMS4-DU AL 2 port Smar tView Multiscr een with 2 ...

  • Adder Technology SVMS2-QUAD - page 2

    SmartView Multiscreen Installation and Use Page 1 About this manual SmartView Multiscreen - Installation and Use First edition (August 2001) (c) 2001 Adder Technology Ltd. Part No. ADD0040/1 www.addertec.com All rights reserved. Whilst every precaution has been taken in the preparation of this manual, Adder Technology Ltd assumes no responsibility ...

  • Adder Technology SVMS2-QUAD - page 3

    SmartView Multiscreen Installation and Use Page 2 Warranty Adder Technology Ltd warrants that this product shall be free from defects in workmanship and materials for a period of one year from the date of original purchase. If the product should fail to operate correctly in normal use during the warranty period, Adder will replace or repair it free ...

  • Adder Technology SVMS2-QUAD - page 4

    SmartView Multiscreen Installation and Use Page 3 Radio Frequency Energy Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances. European EMC directive 89/336/EEC This equipment has been tested and found to ...

  • Adder Technology SVMS2-QUAD - page 5

    SmartView Multiscreen Installation and Use Page 4 Contents 1. Introduction .................................................................................... 6 1.1 Key features ........................................................................................... 6 1.2 Package contents ........................................................ ...

  • Adder Technology SVMS2-QUAD - page 6

    SmartView Multiscreen Installation and Use Page 5 3. Using the SmartView Multiscreen ............................................... 23 3.1 Power on status ..................................................................................... 23 3.2 Front panel keys and remote controller .................................................. 23 3.3 Stat ...

  • Adder Technology SVMS2-QUAD - page 7

    SmartView Multiscreen Installation and Use Page 6 1. Introduction Thank you for purchasing the SmartView Multiscreen. Your SmartView Multiscreen is a high performance Keyboard, Video monitor and Mouse (KVM) sharing device which supports a wide range of PC hardware and software platforms. The Multiscreen is a new concept in KVM switches and enables ...

  • Adder Technology SVMS2-QUAD - page 8

    SmartView Multiscreen Installation and Use Page 7 Intelligent switching feature enables users to switch between all ports or just the active ports. Mixed AT/PS2 keyboards and PS2/RS232 mice suppo rted as standard. Flash upgradeable - SmartView Multiscreen's firmware may be upgraded by connecting a computer's serial port and running a down ...

  • Adder Technology SVMS2-QUAD - page 9

    SmartView Multiscreen Installation and Use Page 8 Supports very wide range of software including Windows 3.X, WFWG, 95, 98, 2000, NT,ME, XP, DOS, Unix, Linux, NetWare, OS/2, BSD etc. Supports the additional shortcut, web access and media control keys found on extended keyboards. May be connected to AdderView GEM products for synchronised switching ...

  • Adder Technology SVMS2-QUAD - page 10

    SmartView Multiscreen Installation and Use Page 9 1.4 Product information Figure 1 - SmartView Multiscreen front view ...

  • Adder Technology SVMS2-QUAD - page 11

    SmartView Multiscreen Installation and Use Page 10 ...

  • Adder Technology SVMS2-QUAD - page 12

    SmartView Multiscreen Installation and Use Page 11 ...

  • Adder Technology SVMS2-QUAD - page 13

    SmartView Multiscreen Installation and Use Page 12 2. Installation 2.1 What you will need Cables to connect the SmartView Multiscreen to each of your PC keyboard, video and mouse ports. Cable specifications are given in appendix A. For convenience we suggest that you connect your keyboard, mouse and first video port using an Adder 3-in-1 combinatio ...

  • Adder Technology SVMS2-QUAD - page 14

    SmartView Multiscreen Installation and Use Page 13 2.2 Mounting the SmartView Multiscreen The SmartView Multiscreen has been designed for use on a desktop or shelf in close proximity to the user’s monitor and peripherals. The optional remote controller may be used if you wish to locate the SmartView Multiscreen on a desk or shelf that is some dis ...

  • Adder Technology SVMS2-QUAD - page 15

    SmartView Multiscreen Installation and Use Page 14 to the mouse and/or keyboard not being recognised by the computers when they are switched on. 2.4 ‘Interface powered’ operation without the optional power adapter The SmartView Multiscreen draws its power from the connected computers via the keyboard cables. A single keyboard connection is norm ...

  • Adder Technology SVMS2-QUAD - page 16

    SmartView Multiscreen Installation and Use Page 15 To enter configure mode at power on: Switch off all the attached PCs and the SmartView Multiscreen. Hold down the front panel key whilst powering on the SmartView Multiscreen. Remember that the SmartView Multiscreen draws its power from any attached PC via the keyboard cable and so will power itsel ...

  • Adder Technology SVMS2-QUAD - page 17

    SmartView Multiscreen Installation and Use Page 16 L1 - SmartView Multiscreen locks on to active ports only during autoscanning (default) L2 - SmartView Multiscreen locks on to every port during autoscanning L3 - SmartView Multiscreen powers on in autoscan mode and locks on to active ports only L4 - SmartView Multiscreen powers on in autoscan mode ...

  • Adder Technology SVMS2-QUAD - page 18

    SmartView Multiscreen Installation and Use Page 17 U7 – Cycle between all ports when switching with ‘Hotkeys + Tab’ or three button mouse (default) U8 – Cycle between active ports only when switching with ‘Hotkeys + Tab’ or three button mouse H1 - Hotkey combination is CTRL + ALT + command key (default) H2 - Hotkey combination is CTRL + ...

  • Adder Technology SVMS2-QUAD - page 19

    SmartView Multiscreen Installation and Use Page 18 2.9 Other useful installation information PC boot up sequence - When your PCs are powered on they communicate with any attached keyboards and mice and setup parameters required by the particular operating system. It is necessary for the SmartView Multiscreen to be attached and powered on during thi ...

  • Adder Technology SVMS2-QUAD - page 20

    SmartView Multiscreen Installation and Use Page 19 Multiscreen, press the front panel key again. A complete power off reset of the connected keyboards and mice will then be performed. This function only resets the shared keyboard and mice that are plugged into the control port. It does not affect the status of any of the other ports on the switch o ...

  • Adder Technology SVMS2-QUAD - page 21

    SmartView Multiscreen Installation and Use Page 20 Type of mouse / system Driver type Likely expected Suggested Connected at bootup data format restoration PS/2 PS/2 only PS/2 F5 PS/2 IntelliMouse PS/2 F5 IntelliMouse / SmartView MS PS/2 only PS/2 F5 IntelliMouse / SmartView MS IntelliMouse IntelliMouse F6 To restore lost mouse movement on a CPU co ...

  • Adder Technology SVMS2-QUAD - page 22

    SmartView Multiscreen Installation and Use Page 21 To perform a firmware upgrade on your SmartView Multiscreen you will need a suitable serial upgrade cable and an IBM PC compatible computer with an RS232 serial port and an operating system that supports DOS. Upgrade cables may be purchased for Adder Technology or may be made using the wiring speci ...

  • Adder Technology SVMS2-QUAD - page 23

    SmartView Multiscreen Installation and Use Page 22 Step 5 - Run the upgrade program The latest version of the SmartView Multiscreen firmware is available from the Adder Technology website at www.addertec.com . The SmartView Multiscreen uses the same firmware as the AdderView GEM product. The program and data files are supplied as a pair e.g. AVG129 ...

  • Adder Technology SVMS2-QUAD - page 24

    SmartView Multiscreen Installation and Use Page 23 3. Using the SmartView Multiscreen This section explains the general operation of the SmartView Multiscreen. We recommend that you read this section before starting to use the product. 3.1 Power on status At power on the SmartView Multiscreen selects computer 1 and displays '1'. If a pass ...

  • Adder Technology SVMS2-QUAD - page 25

    SmartView Multiscreen Installation and Use Page 24 particularly useful in applications where the SmartView Multiscreen is located away from the desktop. The remote controller can be conveniently attached to your keyboard with a couple of Velcro strips to give instant channel information and key control. 3.3 Status display The status display usually ...

  • Adder Technology SVMS2-QUAD - page 26

    SmartView Multiscreen Installation and Use Page 25 3.4 Switching operation When you select a port, your keyboard and mouse will control the computer that is connected to that port and the video feeds from that that computer will be displayed on the monitors. For example, if you select channel 2 then the video signal arriving at port 2A will be sent ...

  • Adder Technology SVMS2-QUAD - page 27

    SmartView Multiscreen Installation and Use Page 26 and displays 0. The video signal is switched off. If a password has not been set then the SmartView Multiscreen can be re-enabled by selecting a channel. If a password has been set then the SmartView Multiscreen displays 'P' to indicate that a valid password must be entered to unlock the ...

  • Adder Technology SVMS2-QUAD - page 28

    SmartView Multiscreen Installation and Use Page 27 ...

  • Adder Technology SVMS2-QUAD - page 29

    SmartView Multiscreen Installation and Use Page 28 ...

  • Adder Technology SVMS2-QUAD - page 30

    SmartView Multiscreen Installation and Use Page 29 ‘2’ of the first SmartView Multiscreen unit A. For example to connect to port 3 on the SmartView Multiscreen cascaded off port 2 of your first SmartView Multiscreen use: press ba ba 2 2 release 2 2 press 3 3 release 3 3 ba ba 3.9 Synchronising SmartView Multiscreens for applications that requir ...

  • Adder Technology SVMS2-QUAD - page 31

    SmartView Multiscreen Installation and Use Page 30 ...

  • Adder Technology SVMS2-QUAD - page 32

    SmartView Multiscreen Installation and Use Page 31 4. SmartView Multiscreen configuration options All the options described in this section are entered in SmartView Multiscreen configure mode - see section 2.6 for instructions on entering configure mode. 4.1 Screen saver time delay SmartView Multiscreen contains a programmable screen saver which wi ...

  • Adder Technology SVMS2-QUAD - page 33

    SmartView Multiscreen Installation and Use Page 32 L1 - SmartView Multiscreen only locks on to active ports during autoscanning (default) L2 - SmartView Multiscreen locks on to every port in turn during autoscanning L3 - SmartView Multiscreen powers on in autoscan mode and locks on to active ports only L4 - SmartView Multiscreen powers on in autosc ...

  • Adder Technology SVMS2-QUAD - page 34

    SmartView Multiscreen Installation and Use Page 33 The SmartView Multiscreen supports ‘Internet Mice’ that are compatible with the Microsoft IntelliMouse. These are fitted with a wheel or other scroll control and sometimes have additional buttons. Examples are: Microsoft IntelliMouse Logitech Pilot Mouse + Logitech MouseMan+ Genius NetMouse Gen ...

  • Adder Technology SVMS2-QUAD - page 35

    SmartView Multiscreen Installation and Use Page 34 4.4 Keyboard hotkey combination The keyboard hotkey combination is used to change a channel, set autoscan mode or secure the product (so that the password needs to be typed before it can be used again). The following keyboard hotkey combinations can be selected. These hotkey combinations are used t ...

  • Adder Technology SVMS2-QUAD - page 36

    SmartView Multiscreen Installation and Use Page 35 the factory default states by typing F8 F8 f f . Use options F5 F5 f f and F6 F6 f f to restore mouse function on disconnected PS/2 CPU mouse connections. F1 - Display firmware first digit (Note: F1 is F F followed by 1 1 NOT l l ) F2 - Display firmware second digit F3 - Display firmware third digi ...

  • Adder Technology SVMS2-QUAD - page 37

    SmartView Multiscreen Installation and Use Page 36 4.8 Cascade query code The SmartView Multiscreens use a special ‘query code’ to detect whether or not they are connected to another SmartView Multiscreen. By default your SmartView Multiscreen uses query code AD. SmartView Pro (another range of keyboard / mouse / video switches from Adder Techn ...

  • Adder Technology SVMS2-QUAD - page 38

    SmartView Multiscreen Installation and Use Page 37 4.10 Exit configure mode When you have finished configuring any special options, simply type ‘E’ followed by (return) to exit configure mode and return to normal operation mode. The attached computers can now be switched on. ...

  • Adder Technology SVMS2-QUAD - page 39

    SmartView Multiscreen Installation and Use Page 38 Appendix A. Cable and connector specifications IMPORTANT NOTE The maximum cable lengths supported vary widely between devices and cables. It may be possible to use cables that are longer than those specified below with certain PCs and peripherals but this cannot be guaranteed. If you experience pro ...

  • Adder Technology SVMS2-QUAD - page 40

    SmartView Multiscreen Installation and Use Page 39 wish to make use of the DDC (Display Data Channel) capabilities of the SmartView Multiscreen then you will need to use cables that have the DDC signalling lines connected (pins 12 and 15 on the 15-way video connector). Not all video cables have these DDC lines connected. Keyboard and PS/2 mice - 6 ...

  • Adder Technology SVMS2-QUAD - page 41

    SmartView Multiscreen Installation and Use Page 40 Recommended cables: 3-in-1 keyboard, video and mouse combination cable - For convenience, neatness and high video quality we recommend the Adder brand 3-in-1 combination cables for the keyboard, mouse and first video head connections. These cables are constructed with tri-coax video links to ensure ...

  • Adder Technology SVMS2-QUAD - page 42

    SmartView Multiscreen Installation and Use Page 41 A3. Options port pin assignments The 15 way D connector located on the back of the SmartView Multiscreen (labelled OPTIONS / FLASH) provides connections for the remote control module and allows an external RS232 device to control the SmartView Multiscreen. See section 3.7 for more details. Pin 9 = ...

  • Adder Technology SVMS2-QUAD - page 43

    SmartView Multiscreen Installation and Use Page 42 A.5 RS232 synchronisation cable pin assignments The cable connections shown below are to connect two SmartView Multiscreens together for synchronised operation (see section 3.9) ...

  • Adder Technology SVMS2-QUAD - page 44

    SmartView Multiscreen Installation and Use Page 43 Appendix B. Problem Solving Problem: Poor video quality with smearing fuzziness or ripple. Action: Use screened coaxial video cables to connect your devices to the SmartView Multiscreen. Problem: Mouse does not move cursor on screen. Action: Ensure that the mouse and computer are both connected to ...

  • Adder Technology SVMS2-QUAD - page 45

    SmartView Multiscreen Installation and Use Page 44 Problem: Mouse moves very slowly but otherwise functions correctly. Action: Change the mouse driver to a Microsoft type or take the action recommended in section 4.9. ...

  • Adder Technology SVMS2-QUAD - page 46

    SMAR T V V i i e e w w MUL TISCREEN INST ALLA TION & USE ADDER T echnology Limited T echnolog y House T rafalgar W a y Bar Hill Cambridge CB3 8SQ • England T : +44 (0) 1954 780044 F: +44 (0) 1954 780081 sales@addertec .com www .adder tec.com SV -MUL TI-05.02/V1 ...

Fabricant Adder Technology Catégorie Network Card

Les documents que nous recevons du fabricant de l'appareilAdder Technology SVMS2-QUAD peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Adder Technology
- manuels d’utilisations SVMS2-QUAD
- fiches produit Adder Technology
- dépliants
- ou étiquettes-énergie Adder Technology SVMS2-QUAD
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Adder Technology SVMS2-QUAD.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Adder Technology SVMS2-QUAD, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Adder Technology SVMS2-QUAD. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Adder Technology SVMS2-QUAD.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Adder Technology SVMS2-QUAD, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Adder Technology SVMS2-QUAD par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Adder Technology SVMS2-QUAD.

Le manuel d’utilisation complet Adder Technology, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Adder Technology SVMS2-QUAD - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Adder Technology SVMS2-QUAD, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lAdder Technology SVMS2-QUAD qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Adder Technology SVMS2-QUAD - qui devraient nous aider dans les premières étapes lors de l'utilisation Adder Technology SVMS2-QUAD
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Adder Technology SVMS2-QUAD
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Adder Technology SVMS2-QUAD dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Adder Technology SVMS2-QUAD?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Adder Technology SVMS2-QUAD, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Adder Technology SVMS2-QUAD il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)