Français dropdown-ico

Manuel d’utilisation Samsung HPL5025

72 pages 7.86 mb
Télécharger

Aller à la page of 72

Summary
  • Samsung HPL5025 - page 1

    Owner ’ s Instructions HPL5025 BN68-00263B-cover 1/12/06 12:31 PM Page 3 ...

  • Samsung HPL5025 - page 2

    Wa rning! Impor tant Safety Instructions 2 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE. REFER SER VICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symb ...

  • Samsung HPL5025 - page 3

    Thank you for choosing Samsung! Y our new Samsung product represents the latest in television technol- ogy . W e designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class. W e are proud to offer you a product that will provide convenient, dependable ser vice and enjoyment for ye ...

  • Samsung HPL5025 - page 4

    •P rotect the power cord. Power supply cords should be routed so that they won’t be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience recepta- cles, and the point where they exit from the unit. • Unplug the Monitor from the wall outlet and disconnect the antenna or cable system ...

  • Samsung HPL5025 - page 5

    User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the fol- lowing warning: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter ...

  • Samsung HPL5025 - page 6

    Impor tant W arranty Information Regarding T elevision Format V iewing W ide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.The images displayed on them should primarily be in the wide screen 16:9 ratio format,or expanded to fill the screen if your ...

  • Samsung HPL5025 - page 7

    Setup Y our New Plasma Display Panel ........................10 Remote Control Buttons ....................................12 W all Installation Instructions ..............................14 Tu r ning the PDP On and Off ..............................18 Connection (Connecting Speakers / Receiver) Connecting Speakers ................................. ...

  • Samsung HPL5025 - page 8

    BN68-00263B-1 1/12/06 10:52 AM Page 8 ...

  • Samsung HPL5025 - page 9

    PLASMA DISPLA Y P ANEL Setup Y our New Plasma Display Panel ....................................................10 Remote Control Buttons ................................................................12 W all Installation Instructions ..........................................................14 Tu r ning the PDP On and Off ....................... ...

  • Samsung HPL5025 - page 10

    Remote Control Signal Receiver Aim the remote control towards this spot on the Monitor . POWER Press to turn the PDP on and off. SOURCE , MENU, VOLUME (-,+), SELECT ( ▼ , ▲ ), MUTE Front Panel Y our New Plasma Display Panel 10 Checking Parts Remote Control/ AAA Batteries Owner’ s Instructions S-VIDEO Cable V ideo/Audio Cable PC Cable Ferrite ...

  • Samsung HPL5025 - page 11

    11 Rear Panel Œ External Speaker Out jacks Connect external speakers. ´ RGB Input 1 jack (15pin) Connect to the video output jack on your PC. ˇ RGB Input 2/Component Video Input jacks (H/V/R/G/B, Y/P b /P r ) RGB input2/Component video input jacks are BNC connectors. ¨ Video Input jack Connect a video signal from external sources like VCRs or D ...

  • Samsung HPL5025 - page 12

    Remote Contr ol Buttons Œ Power button Tu r ns the PDP on and off. ´ Number buttons ˇ Display button Press to display information on the PDP screen. ¨ Menu button Displays the main on-screen menu. ˆ CH (Channel) and VOL (V olume) buttons Channel and V olume buttons are used for selecting menu item in menu mode. Ø Mute button Press to mute the ...

  • Samsung HPL5025 - page 13

    ı VCR control buttons Controls VCR tape functions: Stop, Rewind, Play/Pause, Fast For ward. ˜ SET button Use during setting up of this remote control, so that it will work compatibly with other devices (VCR, cable box, DVD, etc.) ¯ Clock set button Press to clock setting. ˘ PIP control buttons Source : Press to select one of the available signa ...

  • Samsung HPL5025 - page 14

    W all Installation Instructions 1 Do not install the PDP on any place other than vertical walls. 2 To protect the per formance of the PDP and prevent troubles, avoid the following. • Do not install next to smoke and fire detectors. • Do not install in an area subjected to vibration. • Do not install in an area subjected to high voltage. • D ...

  • Samsung HPL5025 - page 15

    1 See the drawing of the wall attachment panel shown in page 14 to check for the stability of the wall where the PDP is to be installed. If the wall is not enough strong to support the PDP , strengthen the wall before installation. 2 Fix the wall attachment panel on the wall using bolts as shown in the following figure: Fixing bolts must protrude f ...

  • Samsung HPL5025 - page 16

    16 4 Remove six large screws from the rear side of the display . 5 Insert the bolts, dish-type washers, and insulation holder into the six screw- holes as shown in the following figure: Œ Bolt ´ Insulation holder 6 Hang the protruding plastic part on the rear of the PDP up the groove on the top of the wall attachment panel. Then, lift down the PD ...

  • Samsung HPL5025 - page 17

    After lifting the PDP up, pull it for ward and remove it from the wall attachment panel. 17 Separating the Display from the W all Attachment Panel ´ Œ BN68-00263B-1 1/12/06 10:53 AM Page 17 ...

  • Samsung HPL5025 - page 18

    Tu rning the Monitor(PDP) On and Off Tu rning the Monitor(PDP) On and Off Press the Power button on the remote control. The PDP will be turned on and you will be ready to use it’ s features. Y ou can also use the Power button on the front of the PDP . Notes: • If your Monitor isn’t turned on when the power button is pressed: Press the MODE bu ...

  • Samsung HPL5025 - page 19

    Displaying Status Information Press the Display button on the remote control. The PDP will display the Screen size, Resolution, Current time, and screen mode. Displaying Clock Press the Clock Display button on the remote control. The Current time will be displayed on the screen. 19 Main : Video SUB : Not Av ailable P. MODE : Custom Scaling : Wide S ...

  • Samsung HPL5025 - page 20

    BN68-00263B-2 1/12/06 11:17 AM Page 20 ...

  • Samsung HPL5025 - page 21

    PLASMA DISPLA Y P ANEL Connection (Connecting Speakers / Receiver) Connecting Speakers ....................................................................22 Connecting a VCR/Cable Box ......................................................23 Connecting a DVD/Set-T op Box ....................................................24 BN68-00263B-2 1/12/06 1 ...

  • Samsung HPL5025 - page 22

    Connecting Speakers 22 Speaker Audio Cable Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching the “+” and “-” ends of the cable with the diagram on the PDP . How to Connect Fix the bracket onto the guide pole located on the rear of speaker and fasten the screws. After removing the three scree ...

  • Samsung HPL5025 - page 23

    23 Connecting a VCR/Cable Box S-Video Cable Audio Cable V ideo Cable Connect Video/S-V ideo cable between the Video/S-V ideo Output jack on the VCR/Cable box and the Video Input jack on the PDP . • For better video, you can use a S-Video cable. •Y ou can attach the Ferrite Cores (supplied) to the both jacks of the Video cable. Simply set the Fe ...

  • Samsung HPL5025 - page 24

    Connecting a DVD/Set-T op Box 24 Audio Cable V ideo (Y , P b , P r ) Cable Power Plug Connect a Video cable between the DVD/Set-T op Box (Y ,P b ,P r ) Output jacks on the DVD/Set- T op Box and the Component1/2 Video Input (Y ,P b ,P r ) Input jacks on the PDP . •Y ou can attach the Ferrite Cores (supplied) to the both jacks of the Video cable. S ...

  • Samsung HPL5025 - page 25

    PLASMA DISPLA Y P ANEL Picture Contr ol Customizing the Picture ................................................................26 Using Automatic Picture Settings ....................................................27 V iewing the Picture-in-Picture ..........................................................28 Changing the Screen Size ............. ...

  • Samsung HPL5025 - page 26

    Customizing the Picture Y ou can use the on-screen menus to change the Brightness, Contrast, Sharpness, Color , and T int settings of your PDP . 26 1 Press the Menu button, then press the joystick to enter . 2 Move the joystick left or right to select the “Custom”. Y ou will also see the items “Contrast”, “Brightness”, “Sharpness”, ...

  • Samsung HPL5025 - page 27

    27 1 Press the Menu button, then press the joystick to enter . 2 Move the joystick left or right to select the “Custom”, “Standard”, or “Mild” picture setting. • Y ou can select “High,” “Middle,” “Low ,” or “Custom” in PC mode. 3 Press the Menu button to exit. Using Automatic Picture Settings Y our PDP has automatic pi ...

  • Samsung HPL5025 - page 28

    V iewing the Picture-in-Picture 28 Selecting the PIP Screen 1 Press the Menu button. Move the joystick up or down to select the “PIP”, then press the joystick to enter . 2 Move the joystick left or right to select the “On”. The PIP image will appear in the corner of the screen. 3 Press the Menu button to exit. Note • The PIP function oper ...

  • Samsung HPL5025 - page 29

    29 Selecting an External Signal Y ou can use PIP to view a signal from an external source, such as a VCR. 1 Press the Menu button. Move the joystick up or down to select the “PIP”, then press the joystick to enter . 2 Move the joystick up or down to select the “Source”, then move the joystick left or right to enter . 3 Move the joystick up ...

  • Samsung HPL5025 - page 30

    30 Changing the Location of the PIP Image 1 Press the Menu button. Move the joystick up or down to select the “PIP”, then press the joystick to enter . 2 Move the joystick up or down to select the “Locate”. 3 Move the joystick to move the PIP screen where you want. 4 Press the Menu button to exit. PIP Select On Locate Source Move Adjust Exi ...

  • Samsung HPL5025 - page 31

    31 Wide Sets the picture to 16:9 wide mode. Panorama Use this mode for the wide aspect ratio of a panoramic picture. Zoom1 Magnify the size of the picture vertically on screen. Zoom2 Magnify the size of the picture more than Zoom1. Stretch Moves the Zoom2 picture up a little to fully show the bottom. Use this picture size if you want to view Zoom2 ...

  • Samsung HPL5025 - page 32

    Freezing the Picture 32 Still Press the Still button on the remote control to freeze a mov- ing picture into a still one. Press again to cancel. BN68-00263B-2 1/12/06 11:18 AM Page 32 ...

  • Samsung HPL5025 - page 33

    PLASMA DISPLA Y P ANEL Sound Contr ol Customizing the Sound ................................................................34 Using Automatic Sound Settings ....................................................35 Using the Surround ......................................................................36 BN68-00263B-2 1/12/06 11:18 AM Page 33 ...

  • Samsung HPL5025 - page 34

    Customizing the Sound 34 1 Press the Menu button. Move the joystick up or down to select the “AUDIO”, then press the joystick to enter . 2 Move the joystick left or right to select the “Custom”. Y ou will also see the items “T reble”, “Bass”, “Balance” and “Surround”. 3 Move the joystick up or down to select the item you wis ...

  • Samsung HPL5025 - page 35

    35 1 Press the Menu button. Move the joystick up or down to select the “AUDIO”, then press the joystick to enter . 2 Move the joystick left or right to select the “Custom”, “Standard”, “Music”, “Movie” or “Speech” sound setting. 3 Press the Menu button to exit. Note • The Automatic Sound Setting function doesn’t operate ...

  • Samsung HPL5025 - page 36

    Using the Surr ound 36 1 Press the Menu button. Move the joystick up or down to select the “AUDIO”, then press the joystick to enter . 2 Move the joystick up or down to select the “Surround”, then move the joystick left or right to select the “Concert”, “Hall” or “Stadium”. 3 Press the Menu button to exit. SOUND Select Treble Ba ...

  • Samsung HPL5025 - page 37

    PLASMA DISPLA Y P ANEL Time Setting Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Setting the Sleep T imer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Setting the T imers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 BN68-00263B-2 1/12/06 11:18 AM Pa ...

  • Samsung HPL5025 - page 38

    Setting the Clock 38 This PDP has a built-in clock that will appear on screen when you press the Clock Display button on the remote control. Setting this clock also allows you to use it to automatically turn the PDP On or Off. 1 Press the Menu button. Move the joystick up or down to select the “TIME”, then press the joystick to enter . 2 Move t ...

  • Samsung HPL5025 - page 39

    39 Y ou can set your PDP to automatically turn off after a preset inter val. 1 Press the Menu button. Move the joystick up or down to select “TIME”, then press the joystick to enter . 2 Move the joystick up or down to select the “Sleep”, then move the joystick left or right. 3 Move the joystick up or down to select the time inter- val for t ...

  • Samsung HPL5025 - page 40

    Setting the Timers 40 This PDP can be set to turn on or off automatically at specific times that you choose. Before using the timers, you must set the PDP’ s clock, as described previously . Setting the On/Off Timer 1 Press the Menu button. Move the joystick up or down to select the “TIME”, then press the joystick to enter . 2 Move the joysti ...

  • Samsung HPL5025 - page 41

    41 6 Move the joystick up or down to select “Off”, then move the joystick left or right to select “On”. 7 If you want to set the Off T ime, move the joystick down to select the “Off T ime”. Set the “Off T ime” just as you set the “On Time”. •I f you want to set the volume level when the PDP turns on, move the joystick down to ...

  • Samsung HPL5025 - page 42

    BN68-00263B-3 1/12/06 11:19 AM Page 42 ...

  • Samsung HPL5025 - page 43

    PLASMA DISPLA Y P ANEL Connecting PC and Operation Connecting to a PC ......................................................................44 Adjusting the PC Screen ................................................................48 Changing the Position of the Image ................................................49 Changing the Size of the Image ...

  • Samsung HPL5025 - page 44

    Connecting to a PC This PDP set is not compatible with Macintosh PC. 44 Connect a PC (15pin) or BNC cable between the Video Output jack on the PC and the RGB1 (15p D-SUB) or RGB2 on the PDP . • Y ou can attach the Ferrite Cores to each jack of the BNC cable. • For an explanation of Component video, see your PC owner’ s instruction. Connect a ...

  • Samsung HPL5025 - page 45

    Pin Configuration • 15Pin Signal Cable (based on protruded pin) Setting up Y our Monitor Plug and Play Our adoption of the new VESA  Plug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system without the usual hassles and confusion. Y our PC system can easi ...

  • Samsung HPL5025 - page 46

    46 How to Set up Y our Display Setting (Windows only) Notes: The plasma panel of this monitor is composed 1366 pixels & 768 lines. That is, the best resolution of this monitor is 1366 X 768. Thus, select 1366 X 768 resolution in same way as below when you control the display setting, If your video card does not support 1366 X 768 resoution, the ...

  • Samsung HPL5025 - page 47

    47 Notes: Both screen position and size will var y , depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: (N: Negative / P: Positive) • The PDP might operate abnormally if a non-standard video format is selected. • When this PDP is used as a PC display , 24-bit color is suppo ...

  • Samsung HPL5025 - page 48

    48 Adjusting the R.G.B Preset: •P ress the RGB button to select the PC mode. 1 Press the Menu button, then press the joystick to enter . 2 Move the joystick up or down to select the “Color Control”, then move the joystick left or right to enter . 3 Move the joystick up or down to select the item you want to change. 4 Move the joystick right o ...

  • Samsung HPL5025 - page 49

    49 After connecting the PDP to your PC, adjust the position of screen if it is not well-aligned. Preset: •P ress the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the “SETUP”, then press the joystick to enter . 2 Move the joystick left or right to select the “Posi- tion”, then adjust the ...

  • Samsung HPL5025 - page 50

    50 Preset: •P ress the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP , then press the joystick to enter . 2 Move the joystick up or down to select the “Scal- ing”, then move the joystick left or right to select the “Wide” or “4:3”. 3 Press the Menu button to exit. Changing ...

  • Samsung HPL5025 - page 51

    51 Preset: •P ress the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP , then press the joystick to enter . 2 Move the joystick up or down to select the “Zoom/Panning”, then move the joystick left or right to enter . 3 Move the joystick left or right to enlarge the image. • The pic ...

  • Samsung HPL5025 - page 52

    52 Preset: •P ress the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP , then press the joystick to enter . 2 Move the joystick up or down to select the “Zoom/Panning”, then move the joystick left or right to enter . 3 Move the joystick up or down to select the “Pan- ning”, then ...

  • Samsung HPL5025 - page 53

    53 Picture Automatic Adjustment On/Off Preset: •P ress the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP , then press the joystick to enter . 2 Move the joystick up or down to select the “Image Lock”, then move the joystick left or right to enter . 3 Move the joystick up or down to ...

  • Samsung HPL5025 - page 54

    54 Frequency Adjustment Preset: •P ress the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP , then press the joystick to enter . 2 Move the joystick up or down to select the “Image Lock”, then move the joystick left or right to enter . 3 Move the joystick up or down to select the “ ...

  • Samsung HPL5025 - page 55

    55 Fine T uning (Phase) Preset: •P ress the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP , then press the joystick to enter . 2 Move the joystick up or down to select the “Image Lock”, then move the joystick left or right to enter . 3 Move the joystick up or down to select the “ ...

  • Samsung HPL5025 - page 56

    56 Preset: •P ress the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP , then press the joystick to enter . 2 Move the joystick up or down to select the “Miscel- laneous”, then move the joystick left or right to enter . 3 Move the joystick up or down to select the “Informa- tion” ...

  • Samsung HPL5025 - page 57

    57 Power Saver (PC mode only) This monitor has a built-in power management system called Power Saver . This power management system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. This power management system operates with a VESA DPMS compliant video card installed in your compute ...

  • Samsung HPL5025 - page 58

    BN68-00263B-4 1/12/06 11:20 AM Page 58 ...

  • Samsung HPL5025 - page 59

    Selecting a Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 Setting the Multi Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Using the Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 Setting up Y our Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Samsung HPL5025 - page 60

    Selecting a Menu Language 60 1 Press the Menu button. Move the joystick up or down to select the “SETUP”, then press the joystick to enter . 2 Move the joystick left or right to select the appropri- ate language: English, Spanish, or French. 3 Press the Menu button to exit. SETUP Move Adjust Exit Language English Multi Control Key Lock Off BN68 ...

  • Samsung HPL5025 - page 61

    61 Setting the Multi Contr ol 1 Press the Menu button. Move the joystick up or down to select the “SETUP”, then press the joystick to enter . 2 Move the joystick up or down to select the “Multi Control”, then move the joystick left or right to enter . 3 Enter ID setup number . The ID Setup operates by using only the joystick or channel up/d ...

  • Samsung HPL5025 - page 62

    62 Using the Key Lock When setting Key Lock ON, the buttons (SOURCE, MENU, VOLUME, SELECT , MUTE, POWER) on the front of the PDP don’t operate. But those buttons will operate when setting Key Lock OFF . 1 Press the Menu button. Move the joystick up or down to select the “SETUP”, then press the joystick to enter . 2 Move the joystick up or dow ...

  • Samsung HPL5025 - page 63

    This PDP's remote control can operate almost any VCR, cable box, or DVD. After it has been set up properly , your remote control can operate in four different modes: VCR, Cable, or DVD. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. Note:The ...

  • Samsung HPL5025 - page 64

    64 Remote Control Codes VCR Codes Cable Box Codes DVD Codes BN68-00263B-4 1/12/06 11:20 AM Page 64 ...

  • Samsung HPL5025 - page 65

    PLASMA DISPLA Y P ANEL Appendix Tr oubleshooting ............................................................................66 Care and Maintenance ................................................................67 Specifications ..............................................................................68 BN68-00263B-4 1/12/06 11:20 AM Page 65 ...

  • Samsung HPL5025 - page 66

    66 Tr oubleshooting Problem Poor picture. The power indicator is amber blinking. Y our Remote control does not operate the monitor . The monitor won’t turn on. There is no screen image. The image is too light or too dark. The image is too large or too small. Only the message "Check T emp" blinks on the screen and then the picture switch ...

  • Samsung HPL5025 - page 67

    67 W ith proper care, your PDP will give you many years of service. Please follow these guidelines to get the maximum perfor mance from your PDP . Identifying Problems • Do not put the PDP near extremely hot, cold, humid or dusty places. • Do not put the PDP near appliances that create magnetic fields. • Keep the ventilation openings clear . ...

  • Samsung HPL5025 - page 68

    68 Specifications Exterior design and product specifications are subject to change without prior notice to improve the perfor mance of this product. This PDP applies to Class B digital device. (Note: Class B system is for home use.) This PDP has been accepted as a device with proper electrowave and you can use this PDP not only in a residential are ...

  • Samsung HPL5025 - page 69

    69 Memo BN68-00263B-4 1/12/06 11:20 AM Page 69 ...

  • Samsung HPL5025 - page 70

    Memo 70 BN68-00263B-4 1/12/06 11:20 AM Page 70 ...

  • Samsung HPL5025 - page 71

    71 Memo BN68-00263B-4 1/12/06 11:20 AM Page 71 ...

  • Samsung HPL5025 - page 72

    BN68-00263B-01(ENG) BN68-00263B-cover 1/12/06 12:31 PM Page 2 ...

Fabricant Samsung Catégorie Flat Panel Television

Les documents que nous recevons du fabricant de l'appareilSamsung HPL5025 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Samsung
- manuels d’utilisations HPL5025
- fiches produit Samsung
- dépliants
- ou étiquettes-énergie Samsung HPL5025
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Samsung HPL5025.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Samsung HPL5025, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Samsung HPL5025. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Samsung HPL5025.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Samsung HPL5025, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Samsung HPL5025 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Samsung HPL5025.

Le manuel d’utilisation complet Samsung, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Samsung HPL5025 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Samsung HPL5025, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lSamsung HPL5025 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Samsung HPL5025 - qui devraient nous aider dans les premières étapes lors de l'utilisation Samsung HPL5025
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Samsung HPL5025
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Samsung HPL5025 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Samsung HPL5025?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Samsung HPL5025, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Samsung HPL5025 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)