Français dropdown-ico

Manuel d’utilisation Toshiba MK4006GAH

153 pages 0.66 mb
Télécharger

Aller à la page of 153

Summary
  • Toshiba MK4006GAH - page 1

    Toshiba Corporation Digital Media Network Company Page 1 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 1.1.1.1.1.1.1.1 TOSHIBA TOSHIBA Hard Disk Drive Specification 1.8 inch Hard Disk Drive MK6006GAH/MK4006GAH /MK3006GAL Rev. 01 REF 360050398 ...

  • Toshiba MK4006GAH - page 2

    Toshiba Corporation Digital Media Network Company Page 2 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Revision History 1.8 inch Hard Disk Drive MK6006GAH/MK4006GAH/MK3006GAL Product Specification Revision Date 00 2004-07-01 Initial issue 01 2004-08-10 ...

  • Toshiba MK4006GAH - page 3

    Toshiba Corporation Digital Media Network Company Page 3 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved The hard disk drive and product specifications contain essential information for the protection of users and others from possible injury and property damage and to ensure correct handling. Please check that you fully understand ...

  • Toshiba MK4006GAH - page 4

    Toshiba Corporation Digital Media Network Company Page 4 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved ● Since the drive is not designed or manufactured to be used for a system including equipment (*1) directly linked with human life, etc., Toshiba Corporation shall not be liable for this type of use. *1: Equipment directly li ...

  • Toshiba MK4006GAH - page 5

    Toshiba Corporation Digital Media Network Company Page 5 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved ■ Do not disassemble, remodel or repair. Disassembly, remodeling or repair may cause injury, failure, or data loss. ■ Do not drop. Dropping may cause injury. ■ Do not touch sharp edges or pins of the drive. Sharp protrusi ...

  • Toshiba MK4006GAH - page 6

    Toshiba Corporation Digital Media Network Company Page 6 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Observe the following to prevent failure, malfunction or data loss. ● Follow the specifications for 7. POWER SUPPLY (page17), 9. ENVIRONMENT (page 22, 23), etc. when using. Failure to do so may cause damage to the drive. ● ...

  • Toshiba MK4006GAH - page 7

    Toshiba Corporation Digital Media Network Company Page 7 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved TABLE OF CONTENTS 1. SCOPE .......................................................................................................................... .............................. 11 2. GENERAL DE SCRIPTI ON................... ...

  • Toshiba MK4006GAH - page 8

    Toshiba Corporation Digital Media Network Company Page 8 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 10.4 H OST I NTERFACE T IMING ........................................................................................................................ 35 10.4.1 Program I/O Wr ite Ti ming ....................................... ...

  • Toshiba MK4006GAH - page 9

    Toshiba Corporation Digital Media Network Company Page 9 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 10.8.35 Set Features (EFh) ............................................................................................................ ........ 96 10.8.36 SECURITY SET PASSW ORD (F 1h) ......................................... ...

  • Toshiba MK4006GAH - page 10

    Toshiba Corporation Digital Media Network Company Page 10 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table of Figures F IGURE 1 MK3006GAL D IMENSIONS ................................................................................................................ 20 F IGURE 2 MK6006GAH/MK4006GAH D IMENSIONS ................... ...

  • Toshiba MK4006GAH - page 11

    Toshiba Corporation Digital Media Network Company Page 11 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 2. SCOPE This document describes the specif ications of the following model, MK3006GAL /MK4006GAH/MK6006GAH of 1.8- inch type Winchester disk drives. . Factory Number Sales Number HDD1442 MK3006GAL HDD1564 MK4006GAH HDD1544 MK ...

  • Toshiba MK4006GAH - page 12

    Toshiba Corporation Digital Media Network Company Page 12 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved ■ Do not disassemble, remodel or repair. Disassembly, remodeling or repair may cause injury, failure, or data loss. ● There is a certain probability of the drive causing failure including data error or data loss. Take prev ...

  • Toshiba MK4006GAH - page 13

    Toshiba Corporation Digital Media Network Company Page 13 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 4. KEY FEA TURES • High capacity in smallest size . 1.8 inch-type 2 platters accommoda ting formatted capacity of 60.0116GB (MK6006GAH)/40.000GB(MK4006GAH), 1 platter accommodating formatte d capacity of 30.0058GB(MK3006GAL) ...

  • Toshiba MK4006GAH - page 14

    Toshiba Corporation Digital Media Network Company Page 14 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved . Low power consumption by Adaptive Power Mode Control . ...

  • Toshiba MK4006GAH - page 15

    Toshiba Corporation Digital Media Network Company Page 15 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 5. BASIC SPECIFICA TION MODEL MK3006GAL MK6006GAH MK4006GAH Formatted Capacity ( gigabytes ) 30.0058 60.0116 40.000 Number of sectors 58, 605,120 117,210,240 78,126,048 Servo design method Sector Servo Recording method 60/61 M ...

  • Toshiba MK4006GAH - page 16

    Toshiba Corporation Digital Media Network Company Page 16 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 6. PERFORMANCE MK3006GAL MK6006GAH MK4006GAH Access time ( msec ) <*1> Track to track seek <*2> 3 Average seek <*3> 15 Max. seek <*4> 26 Rotation speed ( RPM ) 4,200 + 0.1% Average Latency Time ( msec ) ...

  • Toshiba MK4006GAH - page 17

    Toshiba Corporation Digital Media Network Company Page 17 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 7. POWER REQUIREMENTS 7.1 Supply V oltage Allowable voltage 3.3V + 5% Allowable noise/ripple 70 mV p-p or less (note 1) W h en DC power is interrupted,+3.3V voltage drop must be greater than or equal 0V. 7.2 Power Consumption ...

  • Toshiba MK4006GAH - page 18

    Toshiba Corporation Digital Media Network Company Page 18 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 8. MECHANICAL SPECIFICA TIONS 8.1 Dimension and weight MK3006GAL MK6006GAH/MK4006GAH Width (mm) 54.0 ± 0.2 Height (mm) 5.0 + 0.15 8.0 + 0.15 Depth (mm) 78.5 ± 0.3 Warpage (mm) Interconnected area Width (shorter side) Depth ( ...

  • Toshiba MK4006GAH - page 19

    Toshiba Corporation Digital Media Network Company Page 19 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 8.3.1 Installation 1) The drive should be interconnected of mounted carefully on the surface of 0.1mm or less flatness to avoid excessive distortion. 2) The drive can be easily damaged by shocks. In order to prevent the damege ...

  • Toshiba MK4006GAH - page 20

    Toshiba Corporation Digital Media Network Company Page 20 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Figure 1 MK3006GAL Dimensions UNIT: m m ...

  • Toshiba MK4006GAH - page 21

    Toshiba Corporation Digital Media Network Company Page 21 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Figure 2 MK6006GAH/MK4006GAH Dimensions UNIT: mm ...

  • Toshiba MK4006GAH - page 22

    Toshiba Corporation Digital Media Network Company Page 22 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 9. ENVIRONMENT AL LIMITS 9.1 T emperature and Humidity 9.1.1 Temperature Operating 5 o C- 60 o C G r a d i e n t 1 5 o C / Hour maximum Non- operating - 20 o C- 65 o C G r a d i e n t 1 5 o C / Hour maximum Under shipment - 40 ...

  • Toshiba MK4006GAH - page 23

    Toshiba Corporation Digital Media Network Company Page 23 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 9.4 Altitude Operating - 300 m to 3,000 m Non operating - 400 m to 15,000 m 9.5 Acoustics （ Sound Power ） MK3006GAL MK6006GAH/ MK4006GAH 16dB 18dB For idle mode ( Spindle in rotating ). 22dB 24dB Randomly select a track to ...

  • Toshiba MK4006GAH - page 24

    Toshiba Corporation Digital Media Network Company Page 24 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 9.6 Safety S tandards The drive satisfies the following standards . MK3006GAL MK6006GAH/MK4006GAH Underwriters Laboratories (UL) 1950 Canadian Standard Association (CSA)C22.2 No.950 TUV Rheinland EN 60 950 Bureau of Standards, ...

  • Toshiba MK4006GAH - page 25

    Toshiba Corporation Digital Media Network Company Page 25 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved EMC Adaptability The drive satisfies the following standards . MK3006GAL MK6006GAH/MK4006GAH EN5008M1-E1 EN55022 : 1998 Class B EN50081-1 EN61000-3-2 : 1995 EN61000-3-3 : 1995 EN55024 EN61000-4-2 : 1995 EN61000-4-3 : 1995 ENV5 ...

  • Toshiba MK4006GAH - page 26

    Toshiba Corporation Digital Media Network Company Page 26 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 10. RELIABILITY A failure is defined as an inability of the drive to perfo rm its specified function de scribed in the requirements of this document when being operated under the normal conditions or conditions spec ified in t ...

  • Toshiba MK4006GAH - page 27

    Toshiba Corporation Digital Media Network Company Page 27 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 10.6 Load/Unload Be sure to issue and complete the following commands for unloading before cutting off the power supply. Following table shows the specific ation for normal load/unload cycles. Load/unload cycle (Times) Environ ...

  • Toshiba MK4006GAH - page 28

    Toshiba Corporation Digital Media Network Company Page 28 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11. HOST INTERF ACE Related Standards Information technology - AT Attachment Interface with Extensi ons (ATA-2) X3T10.279-199x Information technology - AT Attachment-3 Interface (ATA-3) X3T10/2008D Revision 6 October 26, 1995 ...

  • Toshiba MK4006GAH - page 29

    Toshiba Corporation Digital Media Network Company Page 29 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.2 Electrical specification 11.2.1 Cable length and capacitance 0.46m MAX 35pF MAX 11.2.2 DC input/output Characteristics 11.2.2.1 Input i t e m U n i t v a l u e voltage high (note 1) V 2.0 to 5.5 l o w V - 0 . 3 t o 0 . 8 ...

  • Toshiba MK4006GAH - page 30

    Toshiba Corporation Digital Media Network Company Page 30 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.3 Interface connector 11.3.1 ATA interface connector U N I T : m m Figure 3 ATA interface connector ...

  • Toshiba MK4006GAH - page 31

    Toshiba Corporation Digital Media Network Company Page 31 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.3.2 Pin Assignment The following table describes all of the pins on the Task File Interface. Table 11.3-1 Signal pin assignm ent PIN No. SIGNALS PIN No. SIGNALS 1 - RESET 2 GROUND 3 DD 7 4 DD 8 5 DD 6 6 DD 9 7 DD 5 8 DD 10 ...

  • Toshiba MK4006GAH - page 32

    Toshiba Corporation Digital Media Network Company Page 32 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.3.3 Signal Treatment Driver types and requirem ents for the signal pull - up and down are as follows. Resistor requi reme n t is mi nimu m for t he host. - IO16 is pulled up in the drive with certain value so that the Vol i ...

  • Toshiba MK4006GAH - page 33

    Toshiba Corporation Digital Media Network Company Page 33 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.3.4 Series resistance Each signal has its own series resistance. SIGNAL SERIAL RESISTANCE VALUE -DIOR 82 Ω -HDMARDY HSTROBE -DIOW 82 Ω STOP -CS0, -CS1 82 Ω DA0,DA1,DA2 82 Ω -DMACK 82 Ω DMARQ 22 Ω INTRQ 22 Ω IORDY -DD ...

  • Toshiba MK4006GAH - page 34

    Toshiba Corporation Digital Media Network Company Page 34 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved CSEL O 28 If jumper pins B through D are assigned, Master/Slave setting w ith this pin is valid. When grounded, the drive recognizes itself as a Master. When not grounded, the drive recognizes itself as a Slave. - DMACK O 29 R ...

  • Toshiba MK4006GAH - page 35

    Toshiba Corporation Digital Media Network Company Page 35 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.4 Host Interface Timing 11.4.1 Program I/O Write Timing Transfer mode Symbol Meaning 0 1 2 3 4 t ASW Address Setup to -DOW Low (min.) 70 50 30 30 25 t DS Data Setup to -DOW High (min.) 60 45 30 30 20 t WE -DOW Pulse Width ( ...

  • Toshiba MK4006GAH - page 36

    Toshiba Corporation Digital Media Network Company Page 36 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.4.2 Program I/O Read Timing Transfer mode Symbol Meaning 0 1 2 3 4 t ASE Address Setup to -DIOR Low (min.) 70 50 30 30 25 t RE -DIOR Pulse Width (min.) 165 125 100 80 70 t RDSE -DIOR data setup (min.) 50 35 20 20 20 t DOH D ...

  • Toshiba MK4006GAH - page 37

    Toshiba Corporation Digital Media Network Company Page 37 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.4.3 Multiword DMA Write Timing ATA/ATAPI-6 SPECIFICATIONS Transfer mode MODE 0 MODE 1 MODE 2 Symbol Meaning Min. Max. Min. Max. Min. Max. t0 Cycle time 480 150 120 t C DMACK to DMARQ delay --- --- --- t D -DIOW 16-bit 215 8 ...

  • Toshiba MK4006GAH - page 38

    Toshiba Corporation Digital Media Network Company Page 38 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.4.4 Multiword DMA Read Timing ATA/ATAPI-6 SPECIFICATIONS Transfer mode MODE 0 MODE 1 MODE 2 Symbol Meaning Min. Ma x. Min. Max. Min. Max. t0 Cycle time 480 150 120 t C DMACK to DMARQ delay --- --- --- t D -DIOR 16-bit 215 8 ...

  • Toshiba MK4006GAH - page 39

    Toshiba Corporation Digital Media Network Company Page 39 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.4.5 Ultra DMA Timing Initiating an Ultra DMA data in burst DMARQ (dev i ce) DMACK- (host) STOP (host) HDMARDY- (host) DSTROBE (dev i ce) DD(15:0) t ZAD DA0, DA 1, DA2, CS0-, CS 1- t UI t ZAD t ACK t ACK t ENV t ENV t ZI ORD ...

  • Toshiba MK4006GAH - page 40

    Toshiba Corporation Digital Media Network Company Page 40 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Sustained Ultra DMA data in burst t DVH t DVHIC DSTROBE at dev ic e DD(15:0) at dev ic e DSTROBE at host DD(15:0) at host t CYC t CY C t DVS t DVSI C t DH t DHIC t DS t DSIC t 2CYC t 2CYC t DVH t DVHIC t DVH t DVHIC t DVS t DV ...

  • Toshiba MK4006GAH - page 41

    Toshiba Corporation Digital Media Network Company Page 41 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Device terminating an Ultra DMA data in burst t AZ t IO RDYZ CRC DMARQ (dev i ce) DMACK- (host) STOP (host) HDMARDY- (host) DSTROBE (dev i ce) DD(15:0) DA0, DA 1, DA2, CS0-, CS 1- t ACK t LI t MLI t CVS t LI t ACK t ACK t ZAH ...

  • Toshiba MK4006GAH - page 42

    Toshiba Corporation Digital Media Network Company Page 42 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Host terminating an Ultra DMA data in burst t CVH CRC t AZ DMARQ (dev i ce) DMACK- (host) STOP (host) HDMARDY- (host) DSTROBE (dev i ce) DD(15:0) DA0, DA 1, DA2, CS0-, CS 1- t ACK t MLI t LI t LI t I ORDYZ t ACK t ACK t ZAH t ...

  • Toshiba MK4006GAH - page 43

    Toshiba Corporation Digital Media Network Company Page 43 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Initiating an Ultra DMA data out burst DMARQ (dev i ce) DMACK- (host) STOP (host) DDMARDY- (dev i ce) HSTROBE (host) DD(15:0) (host) DA0, DA 1, DA2, CS0-, CS 1- t UI t ACK t ENV t ZI ORDY t LI t DZFS t DVH t ACK t ACK t UI t D ...

  • Toshiba MK4006GAH - page 44

    Toshiba Corporation Digital Media Network Company Page 44 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Sustained Ultra DMA data out burst t DH t DHIC t DVH t DVHIC HSTROBE at host DD(15:0) at host HSTROBE at dev ic e DD(15:0) at dev ic e t CYC t CY C t DVS t DVSI C t DS t DSIC t 2CYC t 2CYC t DVH t DVHIC t DVH t DVHIC t DVS t D ...

  • Toshiba MK4006GAH - page 45

    Toshiba Corporation Digital Media Network Company Page 45 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Host terminating an Ultra DMA data out burst DMARQ (dev i ce) DMACK- (host) STOP (host) DDMARDY- (dev i ce) HSTROBE (host) DD(15:0) (host) DA0, DA 1, DA2, CS0-, CS 1- t ACK t LI t MLI t CVS t LI t LI t ACK t IO RDYZ t ACK CRC ...

  • Toshiba MK4006GAH - page 46

    Toshiba Corporation Digital Media Network Company Page 46 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Device terminating an Ul tra DMA data out burst DMARQ (dev i ce) DMACK- (host) STOP (host) DDMARDY- (dev i ce) HSTROBE (host) DD(15:0) (host) DA0, DA 1, DA2, CS0-, CS 1- t ACK t MLI t CVS t LI t LI t ACK CRC t CVH t ACK t IO R ...

  • Toshiba MK4006GAH - page 47

    Toshiba Corporation Digital Media Network Company Page 47 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved ATA/ATAPI specifications Transfer mode MODE 0 MODE 1 MODE 2 MODE 3 MODE 4 MODE 5 Symbo l Meaning Min. Max. Min. Max. Min. Ma x. Min. Max. Min. Max. Min. Max. t CYC Cycle time 112 73 54 39 25 16.8 t 2CYC Two cycle time 230 153 ...

  • Toshiba MK4006GAH - page 48

    Toshiba Corporation Digital Media Network Company Page 48 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.4.6 Reset Timing t M t N BUSY - RE S E T Symbol Meaning Minimum Maximum Unit Condition t M RESET pulse width (Low) 25 µ s t N RESET inactive to BSY active 400 ns 11.5 Grounding HDA (Head Disk Assembly) and DC ground(ground ...

  • Toshiba MK4006GAH - page 49

    Toshiba Corporation Digital Media Network Company Page 49 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.6 Address Decoding The host addresses the drive using programmed I/O. In this method, the required register address should be placed on the three host address lines, DA2 - DA0. An appropriate chip is selected and a read or ...

  • Toshiba MK4006GAH - page 50

    Toshiba Corporation Digital Media Network Company Page 50 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7 Register Description In the following register descriptions, unused write bit should be treated as “don't care”, and unused read bits should be read as zeros. 11.7.1 Data Register - CS0 DA2-DA0 : 0 Read / Write T ...

  • Toshiba MK4006GAH - page 51

    Toshiba Corporation Digital Media Network Company Page 51 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.2 Error Register - CS0 DA2-DA0 : 1 Read ONLY 11.7.2.1 Operational Mode The following descriptions are bit definitions for the oper ational mode including the error information from the last command. This command is valid ...

  • Toshiba MK4006GAH - page 52

    Toshiba Corporation Digital Media Network Company Page 52 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.3.1 Smart command This command is used with the Smart commands to select subcommands. 11.7.4 Sector Count Register - CS0 DA2-DA0 : 2 Read / Write 11.7.4.1 Disk Access command The sector count register determines the numbe ...

  • Toshiba MK4006GAH - page 53

    Toshiba Corporation Digital Media Network Company Page 53 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.5 Sector Number Register - CS0 DA2-DA0 : 3 Read / Write The target logical sector number (starting from 1) for Read, Write, and Verify commands is set in this register. After completion of a command, it shows the sector n ...

  • Toshiba MK4006GAH - page 54

    Toshiba Corporation Digital Media Network Company Page 54 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.7.2 SMART commands This register should be set to C2h for SMART commands 11.7.8 Device/Head Register - CS0 DA2-DA0 : 6 Read / Write The value of this register is used to select the dr ive, Drive0 or Drive1, and head. On m ...

  • Toshiba MK4006GAH - page 55

    Toshiba Corporation Digital Media Network Company Page 55 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.9 Status Register -CS0 DA2-DA0:7 Read only This register contains the command status. The contents of the register are updated at the completion of each command and whenever the error occurs. The host syst em reads this r ...

  • Toshiba MK4006GAH - page 56

    Toshiba Corporation Digital Media Network Company Page 56 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.10 Command Register - CS0 DA2-DA0 : 7 Write only The command register accepts commands for the driv e to perform fixed disk operations. Commands are executed when the TASK FILE is loaded and the command register is writte ...

  • Toshiba MK4006GAH - page 57

    Toshiba Corporation Digital Media Network Company Page 57 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table 11.7-2 Comm and Code Command Code Command Name Hex Value PARAMETERS USED SC SN CY DRV HD FT Nop 00H X X X O X X Recalibrate 1xH X X X O X X Read Sector(s) 20/21H O O O O O X Read Sector(s) EXT 24h O O O O O X Read DMA EX ...

  • Toshiba MK4006GAH - page 58

    Toshiba Corporation Digital Media Network Company Page 58 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.11 Alternate Status Register - CS1 DA2-DA0 : 6 Read only This register contains the same information as the stat us register in the Task File. The only difference is that this register being read does not imply interrupt ...

  • Toshiba MK4006GAH - page 59

    Toshiba Corporation Digital Media Network Company Page 59 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved -HEAD SELECT represents one’s complement of the binary coded address of currently selected head, but does not show actual selection of the head. ...

  • Toshiba MK4006GAH - page 60

    Toshiba Corporation Digital Media Network Company Page 60 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8 Command Descriptions The drive interprets the commands written in the comm and register by the host sy stem and executes them. This table shows the drive’s response to t he valid commands written in command-register. Co ...

  • Toshiba MK4006GAH - page 61

    Toshiba Corporation Digital Media Network Company Page 61 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.1 Nop (00h) COMMAND CODE 0 0 0 0 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY no change HD no change SN no change SC no change FT no change LBA no change The Nop command reports the status ...

  • Toshiba MK4006GAH - page 62

    Toshiba Corporation Digital Media Network Company Page 62 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.5 Read Sector (20h/21h) COMMAND CODE 0 0 1 0 0 0 0 X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY starting cylinder last possible HD st arting head last possible SN starting sector last possi ble ...

  • Toshiba MK4006GAH - page 63

    Toshiba Corporation Digital Media Network Company Page 63 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.7 Write Sector (30h/31h) COMMAND CODE 0 0 1 1 0 0 0 X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY starting cylinder last possible HD st arting head last possible SN starting sector start sector S ...

  • Toshiba MK4006GAH - page 64

    Toshiba Corporation Digital Media Network Company Page 64 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved This command is available in LBA addressing only. 11.8.9 Read Verify (40h) COMMAND CODE 0 1 0 0 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY starting cylinder last possible HD st arting head la ...

  • Toshiba MK4006GAH - page 65

    Toshiba Corporation Digital Media Network Company Page 65 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.11 Write Verify 6 (3Ch) COMMAND CODE 0 0 1 1 1 1 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY starting cylinder last possible HD st arting head last possible SN starting sector start sector SC ...

  • Toshiba MK4006GAH - page 66

    Toshiba Corporation Digital Media Network Company Page 66 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Sector interleave is always set to one regardless of sector sequence in the format table. Data subsequent to format table are handled as “Don't care”. FORMAT TABLE ( FIRST 86 BYT ES ) (Ex. 43 logical sector mode) 0001 ...

  • Toshiba MK4006GAH - page 67

    Toshiba Corporation Digital Media Network Company Page 67 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.15 Execute Diagnostics (90h) COMMAND CODE 1 0 0 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR OOH CY OOH HD OOH SN O1H SC O1H FT This command enables the drive to execute following self -test and reports the re ...

  • Toshiba MK4006GAH - page 68

    Toshiba Corporation Digital Media Network Company Page 68 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.17 Download Microcode (92h) COMMAND CODE 1 0 0 0 0 0 1 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive number no change CY 00h HD no change SN number of sector(hi gh order) 00h SC number of sector(low order) 00h FT ...

  • Toshiba MK4006GAH - page 69

    Toshiba Corporation Digital Media Network Company Page 69 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.18 Read Multiple (C4h) COMMAND CODE 1 1 0 0 0 1 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive number no change CY starting cylinder last possible HD st arting head last possible SN starting sector last possi bl ...

  • Toshiba MK4006GAH - page 70

    Toshiba Corporation Digital Media Network Company Page 70 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.19 Read Multiple EXT (29h) COMMAND CODE 0 0 1 0 1 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change LBA Low Current Previous LBA(7:0) LBA(31:24) HOB=0 HOB=1 last address last address LBA Mid Current ...

  • Toshiba MK4006GAH - page 71

    Toshiba Corporation Digital Media Network Company Page 71 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved After the transfer of a data block which contains a se ctor with error, the contents of the Command Block Registers are undefined. The host should retry the trans fer as individual requests to obtain valid error information. ...

  • Toshiba MK4006GAH - page 72

    Toshiba Corporation Digital Media Network Company Page 72 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.21 Write Multiple EXT (39h) COMMAND CODE 0 0 1 1 1 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change LBA Low Current Previous LBA(7:0) LBA(31:24) HOB=0 HOB=1 last address last address LBA Mid Curren ...

  • Toshiba MK4006GAH - page 73

    Toshiba Corporation Digital Media Network Company Page 73 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.23 Read DMA (C8h/C9h) COMMAND CODE 1 1 0 0 1 0 0 X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY starting cylinder last possible HD st arting head last possible SN starting sector last possi ble SC ...

  • Toshiba MK4006GAH - page 74

    Toshiba Corporation Digital Media Network Company Page 74 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.25 Write DMA (CAh/CBh) COMMAND CODE 1 1 0 0 1 0 1 X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY starting cylinder last possible HD st arting head last possible SN starting sector last possi ble S ...

  • Toshiba MK4006GAH - page 75

    Toshiba Corporation Digital Media Network Company Page 75 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.27 Power Control (Exh) COMMAND CODE 1 1 1 0 X X X X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY no change HD no change SN no change SC shown below 00/ FFH (for E5/98 comm and) no change (for othe ...

  • Toshiba MK4006GAH - page 76

    Toshiba Corporation Digital Media Network Company Page 76 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.27.3 Stand-by (E2/96) This command causes the device to enter stand-by mode. If SC is non-zero then stand-by timer shall be enabled. The value in SC shall be used to determine the time programmed into the stand-by timer. ...

  • Toshiba MK4006GAH - page 77

    Toshiba Corporation Digital Media Network Company Page 77 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.28 Read Buffer (E4h) COMMAND CODE 1 1 1 0 0 1 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY no change HD no change SN no change SC 00H FT no change This command transfers a specified sector of ...

  • Toshiba MK4006GAH - page 78

    Toshiba Corporation Digital Media Network Company Page 78 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-1 Identify Informat ion WORD DESCRIPTION Hex. 0 General configuration 15 0=ATA device 14-8 Reserved 7 1=Removable cartridge device 6 1=Fixed device 5-3 Reserved 2 Response incomplete 1-0 Reserved 0040 1 Number of de ...

  • Toshiba MK4006GAH - page 79

    Toshiba Corporation Digital Media Network Company Page 79 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-2 Identify Inform ation (Conti nued) WORD DESCRIPTION Hex. 57-58 Current capacity in sectors (Number of current cylinders * Number of current heads * Number of current sectors per track) XXXX 59 15-9 Reserved 8 1=Mu ...

  • Toshiba MK4006GAH - page 80

    Toshiba Corporation Digital Media Network Company Page 80 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-3 Identify Inform ation (Conti nued) WORD DESCRIPTION Hex. 83 Command set supported. 0000h or FFFFh = command set notification not supported 15 0 (Fixed) 14 1(Fixed) 13 1=FLUSH CACHE EXT command supported 12 1=FLUSH ...

  • Toshiba MK4006GAH - page 81

    Toshiba Corporation Digital Media Network Company Page 81 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-4 Identify Inform ation (Conti nued) WORD DESCRIPTION Hex. 87 Command set/feature default 15 0 (Fixed) 14 1 (Fixed) 13 1 (Fixed) 12-6 Reserved 5 1=General Purpose Logging feature set supported 4 R e s e r v e d 3 1= ...

  • Toshiba MK4006GAH - page 82

    Toshiba Corporation Digital Media Network Company Page 82 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-5 Identify Inform ation (Conti nued) WORD DESCRIPTION Hex. 127 Removable Media Status Noti fication feature set supported 15-2 Reserved 1-0 00=Removable Media Status Notification feature set not supported 01=Removab ...

  • Toshiba MK4006GAH - page 83

    Toshiba Corporation Digital Media Network Company Page 83 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Word descriptions: WORD 0: General configuration bit 15 0=ATA bit 14-8 Reserved bit 7 1=Removable cartridge bit 6 1=Fixed disk drive bit 5-3 Reserved bit 2 Response incomplete bit 1-0 Reserved The value for this WORD is 0040h. ...

  • Toshiba MK4006GAH - page 84

    Toshiba Corporation Digital Media Network Company Page 84 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 47: bit 15 - 8 shall be set to 80h bit 7 - 0 Maximum number of sectors that can be transferred per interrupt on READ/WRITE MULTIPLE commands. The default value for this WORD is 8010h. WORD 48: Reserved WORD 49: Capabiliti ...

  • Toshiba MK4006GAH - page 85

    Toshiba Corporation Digital Media Network Company Page 85 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 57-58: Total number of sectors calculated by word 54 - 56 bit31-24 by word 58 bit 7- 0 bit23-16 by word 58 bit 15- 8 bit15- 8 by word 57 bit 7- 0 bit 7- 0 by word 57 bit 15- 8 The power on values for each models are. Driv ...

  • Toshiba MK4006GAH - page 86

    Toshiba Corporation Digital Media Network Company Page 86 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 65: Minimum multiword DMA transfer mode cycle time per word (ns) If this bit is supported, word 53 bit 1 shall be set. The value for this WORD is 0078h (120ns). WORD 66: Manufacturer recommended multiword DMA transfer cyc ...

  • Toshiba MK4006GAH - page 87

    Toshiba Corporation Digital Media Network Company Page 87 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 83: Features/Command sets supported bit 15 0 (Fixed) bit 14 1 (Fixed) bit 13 1=FLUSH CACHE EXT command supported bit 12 1=FLUSH CACHE command supported bit 11 1=Device Configuration Overlay supported bit 10 1=48-bit Addre ...

  • Toshiba MK4006GAH - page 88

    Toshiba Corporation Digital Media Network Company Page 88 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 86: Features / Command sets enabled bit 15-14 Reserved bit 13 1=FLUCH CACHE EXT command supported bit 12 1=FLUSH CACHE command supported bit 11 1=Device Configuration Overlay supported bit10 1=48-bit Address feature set s ...

  • Toshiba MK4006GAH - page 89

    Toshiba Corporation Digital Media Network Company Page 89 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 90: Time required for Enhanced Security erase completion WORD 91: Current Advanced Power Management setting bit 15-8 Reserved bit 7-0 Current Advanced Power Management setting set by Set Features Command. The default valu ...

  • Toshiba MK4006GAH - page 90

    Toshiba Corporation Digital Media Network Company Page 90 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 128: Security status bit 15-9 Reserved bit 8 the security level. 1=the security level is maximum 0=the security level is high bit 5 1=the Enhanced security erase unit feature supported bit 4 the security count has expired ...

  • Toshiba MK4006GAH - page 91

    Toshiba Corporation Digital Media Network Company Page 91 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.31 SET MAX (F9h) Individual SET MAX commands are identified by the value placed in the Features register. Table 11.8-6 shows these Features register values. But r egardless of Feature register value, the case this command ...

  • Toshiba MK4006GAH - page 92

    Toshiba Corporation Digital Media Network Company Page 92 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.31.2 Set Max Set Password F9h with the content of the Features register equal to 01h. COMMAND CODE 1 1 1 1 1 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY no change HD no change SN no change ...

  • Toshiba MK4006GAH - page 93

    Toshiba Corporation Digital Media Network Company Page 93 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.31.4 Set Max Unlock F9h with the content of the Features register equal to 03h. COMMAND CODE 1 1 1 1 1 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY no change HD no change SN no change SC no ...

  • Toshiba MK4006GAH - page 94

    Toshiba Corporation Digital Media Network Company Page 94 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.32 SET MAX ADDRESS EXT (37h) COMMAND CODE 0 0 1 1 0 1 1 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change LBA Low Current Previous Max LB A(7:0) Max LBA(31:24) HOB=0 HOB=1 no change no change LBA Mid Cu ...

  • Toshiba MK4006GAH - page 95

    Toshiba Corporation Digital Media Network Company Page 95 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.34 Read Native Max Address EXT (27h) COMMAND CODE 0 0 1 0 0 1 1 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change LBA Low Current Previous HOB=0 HOB=1 Max LBA(7:0) Max LBA(31:24) LBA Mid Current Previou ...

  • Toshiba MK4006GAH - page 96

    Toshiba Corporation Digital Media Network Company Page 96 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.35 Set Features (EFh) COMMAND CODE 1 1 1 0 1 1 1 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY no change HD no change SN no change SC Mode Selection for Data Transfer(*2) no change FT Features(*1 ...

  • Toshiba MK4006GAH - page 97

    Toshiba Corporation Digital Media Network Company Page 97 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.36 SECURITY SET PASSWORD (F1h) COMMAND CODE 1 1 1 1 0 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY no change HD no change SN no change SC no change FT no change This command requests a trans ...

  • Toshiba MK4006GAH - page 98

    Toshiba Corporation Digital Media Network Company Page 98 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.37 SECURITY UNLOCK (F2h) COMMAND CODE 1 1 1 1 0 0 1 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY no change HD no change SN no change SC no change FT no change This command requests the host to t ...

  • Toshiba MK4006GAH - page 99

    Toshiba Corporation Digital Media Network Company Page 99 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.39 SECURITY ERASE UNIT (F4h) COMMAND CODE 1 1 1 1 0 1 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY no change HD no change SN no change SC no change FT no change This command must be issued imm ...

  • Toshiba MK4006GAH - page 100

    Toshiba Corporation Digital Media Network Company Page 100 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.41 SECURITY DISABLE PASSWORD (F6h) COMMAND CODE 1 1 1 1 0 1 1 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY no change HD no change SN no change SC no change FT no change This command can be exec ...

  • Toshiba MK4006GAH - page 101

    Toshiba Corporation Digital Media Network Company Page 101 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.1 SMART Read Attribute values COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY C24Fh no change HD no change SN no change SC FT D0h no change This command transfers SMA ...

  • Toshiba MK4006GAH - page 102

    Toshiba Corporation Digital Media Network Company Page 102 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Byte Description 0 Attribute ID number 01 - FFh 1-2 Status flag bit 0 (pre-failure/advisory bit) bit 0 = 0: If attribute value is less than the threshold, the drive is in advisory condition. Product life period may expired. b ...

  • Toshiba MK4006GAH - page 103

    Toshiba Corporation Digital Media Network Company Page 103 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved BYTE 362: Off-line data collection status Value Definition 00h or 80h Off-line data collection activity was never started. 01h Reserved 02h or 82h Off-line data collection activi ty was completed without error. 03h or 83h Off ...

  • Toshiba MK4006GAH - page 104

    Toshiba Corporation Digital Media Network Company Page 104 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved bit 3 (off-line read scanning implemented bit) If this bit is cleared to zero, the dev ice does not support off-line read scanning. If this bit is set to one, the device supports off-line read scanni ng. This bit is set to 1. ...

  • Toshiba MK4006GAH - page 105

    Toshiba Corporation Digital Media Network Company Page 105 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.2 SMART Read Attribute thresholds COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY C24Fh no change HD no change SN no change SC FT D1h no change This command transfers ...

  • Toshiba MK4006GAH - page 106

    Toshiba Corporation Digital Media Network Company Page 106 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.3 SMART Enable Disable Attribute Autosave COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY C24Fh no change HD no change SN no change SC 00h/F1h no change FT D2h no cha ...

  • Toshiba MK4006GAH - page 107

    Toshiba Corporation Digital Media Network Company Page 107 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.5 SMART Execute Off-line Immediate COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY C24Fh no change HD no change SN Subcomm and specific no change SC no change FT D4h ...

  • Toshiba MK4006GAH - page 108

    Toshiba Corporation Digital Media Network Company Page 108 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved e) If the device is in the process of performing the subcommand routine and is interrupted by a SMART DISABLE OPERATIONS command from the host, t he device will abort the subcommand routine and service the host within two sec ...

  • Toshiba MK4006GAH - page 109

    Toshiba Corporation Digital Media Network Company Page 109 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved LBA 0 User LBA s pace LBA max Test span 1 Starting LBA for test span 1 Ending LBA for test span 1 Tes t span 2 Starting LBA f or test span 2 Ending LBA for test s pan 2 Tes t span 3 Starting LBA for test span 3 Ending LBA for ...

  • Toshiba MK4006GAH - page 110

    Toshiba Corporation Digital Media Network Company Page 110 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.6 SMART Read Log Sector COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY C24Fh no change HD no change SN Log Sector Address no change SC Number of sectors to read 00h ...

  • Toshiba MK4006GAH - page 111

    Toshiba Corporation Digital Media Network Company Page 111 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved SMART Log Directory Byte Descriptions 0-1 SMART Logging Version 2 Number of sectors in the log at log address 1 3 Reserved 4 Number of sectors in the log at log address 2 5 Reserved … … 510 Number of sectors in the log at ...

  • Toshiba MK4006GAH - page 112

    Toshiba Corporation Digital Media Network Company Page 112 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.6.2.3 Command data structure The fifth command data structure will contain the command or reset for which the error is being reported. The fourth command data structure should contain the command or reset that precede ...

  • Toshiba MK4006GAH - page 113

    Toshiba Corporation Digital Media Network Company Page 113 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved State field values Value State x0h Unknown x1h Sleep x2h Standby x3h Ac tive/Idle with BSY cleared to zero x4h Executing SMART off-line or self-test x5h-xAh Reserved xBh-xFh Vendor unique The value of x is vendor specific and ...

  • Toshiba MK4006GAH - page 114

    Toshiba Corporation Digital Media Network Company Page 114 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Comprehensive error log Byte First sector Subsequent sectors 0 SMART error log version Reserved 1 Error log index Reserved 2-91 First error log data structure Data structure 5n+1 92-181 Second error log data structure Data st ...

  • Toshiba MK4006GAH - page 115

    Toshiba Corporation Digital Media Network Company Page 115 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Self-test log data structure Byte Descriptions 0-1 Self-test log data structure revision number 2-25 First descriptor entry 26-49 Second descriptor entry ..... ............ 482-505 Twenty-first descriptor entry 506-507 Vendor ...

  • Toshiba MK4006GAH - page 116

    Toshiba Corporation Digital Media Network Company Page 116 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.6.4.3 Self-test index The self-test index will point to the most recent entry . Initially, when the log is empty, the index will be set to zero. It will be set to one when the first entry is made, two for the second e ...

  • Toshiba MK4006GAH - page 117

    Toshiba Corporation Digital Media Network Company Page 117 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.6.5.3 Current LBA under test The Current LBA under test field shall be written with a val ue of zero by the host. As t he self-test progresses, the device shall modify this value to contain the beginning LBA of the 65 ...

  • Toshiba MK4006GAH - page 118

    Toshiba Corporation Digital Media Network Company Page 118 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.7 SMART Write Log Sector COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY C24Fh no change HD no change SN Log Sector Address no change SC Number of sectors to write 00 ...

  • Toshiba MK4006GAH - page 119

    Toshiba Corporation Digital Media Network Company Page 119 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.9 SMART Disable Operations COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY C24Fh no change HD no change SN no change SC no change FT D9h no change This command disabl ...

  • Toshiba MK4006GAH - page 120

    Toshiba Corporation Digital Media Network Company Page 120 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.11 SMART Enable/Disable Automatic Off-line COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY C24Fh no change HD no change SN no change SC 00h/F8h no change FT DBh no ch ...

  • Toshiba MK4006GAH - page 121

    Toshiba Corporation Digital Media Network Company Page 121 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.43 Read Log EXT (2Fh) COMMAND CODE 0 0 1 0 1 1 1 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change LBA Low Current Previous log address Reserved HOB=0 HOB=1 Reserved Reserved LBA Mid Current Previous S ...

  • Toshiba MK4006GAH - page 122

    Toshiba Corporation Digital Media Network Company Page 122 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved General Purpose Log Directory Byte Descriptions 0-1 General Purpose Logging Version 2 Number of sectors in the log at log address 01h (7:0) 3 Number of sectors in the log at log address 01h (15:8) 4 Number of sectors in the l ...

  • Toshiba MK4006GAH - page 123

    Toshiba Corporation Digital Media Network Company Page 123 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.43.2.3 Extended Error log data structure The error log is viewed as a circular buffer. When t he last supported error log se ctor has been filled, the next error shall create an error log data struct ure that replaces th ...

  • Toshiba MK4006GAH - page 124

    Toshiba Corporation Digital Media Network Company Page 124 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Command data structure Byte Descriptions n Content of the Device Control register when the Command register was written. N+1 Content of the Features register (7:0) w hen the Command register was written. (see note) n+2 Conten ...

  • Toshiba MK4006GAH - page 125

    Toshiba Corporation Digital Media Network Company Page 125 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved State shall contain a value indicating the state of the device when the command was written to the Command register or the reset occurred as described in the fo llo wing table. State field values Value State x0h Unknown x1h S ...

  • Toshiba MK4006GAH - page 126

    Toshiba Corporation Digital Media Network Company Page 126 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Extended Self-test log data structure Byte First sector Subsequent sectors 0 Self-test log data struct ure revision number Reserved 1 Reserved Reserved 2 Self-test descriptor index (7:0) Reserved 3 Self-test descriptor index ...

  • Toshiba MK4006GAH - page 127

    Toshiba Corporation Digital Media Network Company Page 127 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Life timestamp shall contain the power-on lifetime of the device in hours when the nth self-test subcommand was completed. Content of the self-test failure checkpoint byte may c ontain additional information about the self-te ...

  • Toshiba MK4006GAH - page 128

    Toshiba Corporation Digital Media Network Company Page 128 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.45.1 Device Configuration Restore COMMAND CODE 1 0 1 1 0 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY na no change HD na no change SN na no change SC na no change FT C0h no change LBA na no ...

  • Toshiba MK4006GAH - page 129

    Toshiba Corporation Digital Media Network Company Page 129 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved The DEVICE CONFIGURATION IDENTIFY command returns a 512 byte data structure via PIO data-in transfer. The content of this data structure i ndicates the selectable commands, modes, and feature sets that the device is capable o ...

  • Toshiba MK4006GAH - page 130

    Toshiba Corporation Digital Media Network Company Page 130 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.45.3.1.3 Word 2: Ultra DMA modes supported Word 3 bits 5-0 contain the same information as cont ained in word 88 of the IDENTIFY DEVICE or IDENTIFY PACKET DEVICE command response. Bits 15-6 of word 3 are reserved. 11.8.4 ...

  • Toshiba MK4006GAH - page 131

    Toshiba Corporation Digital Media Network Company Page 131 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.45.4.1 Error outputs Register 7 6 5 4 3 2 1 0 Error na na na na na ABRT na na Sector Count na Sector Number Bit location low Cylinder Low Bit locati on high Cylinder High Word location Device/Head obs na obs DEV na Statu ...

  • Toshiba MK4006GAH - page 132

    Toshiba Corporation Digital Media Network Company Page 132 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved The format of the overlay transmitted by the device is described inTable 11.8-9. The restrictions on changing these bits is described in the text following Table 11.8-9. If any of the bit modification restrictions described a ...

  • Toshiba MK4006GAH - page 133

    Toshiba Corporation Digital Media Network Company Page 133 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.45.4.2.3 Word 2: Ultra DMA modes supported Word 2 bits 15:6 are reserved. Word 2 bit 5 is cleared to disable support for Ultra DMA m ode 5 and has the effect of clearing bit 5 in word 88 of the IDENTIFY DEVICE or IDENTIF ...

  • Toshiba MK4006GAH - page 134

    Toshiba Corporation Digital Media Network Company Page 134 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Word 7 bit 4 is cleared to disable support for the Power- up in Standby feature set and has the effect of clearing bits 5 and 6 in words 83 and 86 and clearing the value in word 94 of the IDENTIFY DEVICE or IDENTIFY PACKET DE ...

  • Toshiba MK4006GAH - page 135

    Toshiba Corporation Digital Media Network Company Page 135 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.9 Security Mode Feature Set The Security mode features allow the host to impl ement a security password system to prevent unauthorized access to the disk drive. • Following Commands are supported for this feature set . ? ...

  • Toshiba MK4006GAH - page 136

    Toshiba Corporation Digital Media Network Company Page 136 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.9.3 Security mode operation from power-on In locked mode, the drive rejects media a ccess commands until a SECURITY UNLOCK command is successfully completed. Power-on Locked m ode UNLOCK ERASE Media access Non-media PREPAR ...

  • Toshiba MK4006GAH - page 137

    Toshiba Corporation Digital Media Network Company Page 137 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.9.4 Password lost If the user password is lost and High level security is set, the drive does not allow the user to access any data. However, the drive can be unl ocked using the master password. If the user password is lo ...

  • Toshiba MK4006GAH - page 138

    Toshiba Corporation Digital Media Network Company Page 138 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.9.5 Command Table This command table shows the drive’s response to commands when the Security Function is enabled. Table 11.9-1 Security m ode comm and actions Comm and Locked mode Unlocked mode Frozen mode CHECK POWER M ...

  • Toshiba MK4006GAH - page 139

    Toshiba Corporation Digital Media Network Company Page 139 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.10 Self-Monitoring, Analysis and Reporting T echnology Self-monitoring, analysis and reporting technology (SMART ) is the function to protect user data and to minimize the likelihood of unscheduled system downt ime that ma ...

  • Toshiba MK4006GAH - page 140

    Toshiba Corporation Digital Media Network Company Page 140 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.11 Adaptive Power Mode Control Adaptive Power Mode Control is a function to reduc e power consumption without performance degradation. The drive supports the following Idle modes of 3 levels. The drive enters in to idle mo ...

  • Toshiba MK4006GAH - page 141

    Toshiba Corporation Digital Media Network Company Page 141 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.12 Reset A RESET condition sets the drive ( or both drives in case of Drive0/Drive1 connection ) BSY, allowing the drive to perform the specified initia lization required for normal operation. A RESET condition can be gene ...

  • Toshiba MK4006GAH - page 142

    Toshiba Corporation Digital Media Network Company Page 142 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.13 Drive0/Drive1 Configuration Drive address shall be set by the optional jumper of interface connector. The drive runs as Drive0 when the jumper is open or if jumper plug is set to position B-D when P28(CSEL) signal is lo ...

  • Toshiba MK4006GAH - page 143

    Toshiba Corporation Digital Media Network Company Page 143 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.14 Cache Memory 11.14.1 Cache Operations (1) READ CACHE OPERATION Receiving a read command, the data in the buffer memory are sent to the host without access to the disk media as long as the object data reside in the buffe ...

  • Toshiba MK4006GAH - page 144

    Toshiba Corporation Digital Media Network Company Page 144 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 12. Protocol Commands can be grouped into different classes accordi ng to the protocols used for command execution. The command classes with their asso ciated protocols are defined below. For all commands, the host first chec ...

  • Toshiba MK4006GAH - page 145

    Toshiba Corporation Digital Media Network Company Page 145 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 12.1 PIO data in commands Commands for this class are: • IDENTIFY DEVICE • READ BUFFER • READ SECTOR(S) (wit h and without retry) • READ SECTOR(S) EXT • READ MULTIPLE • READ MULTIPLE EXT • SMART Read Attribute V ...

  • Toshiba MK4006GAH - page 146

    Toshiba Corporation Digital Media Network Company Page 146 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved • WRITE MULTIPLE • WRITE MULTIPLE EXT • WRITE SECTOR(S) (with and without retry) • WRITE SECTOR(S) EXT • WRITE VERIFY • SECURITY DISABLE PASSWORD • SECURITY ERASE UNIT • SECURITY SET PASSWORD • SECURITY UNLO ...

  • Toshiba MK4006GAH - page 147

    Toshiba Corporation Digital Media Network Company Page 147 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved The Write Multiple command transfers one block ( the number of sectors is defined by the Set Multiple command ) of data for each interrupt. The other commands transfer one sector of data for each interrupt. If the drive detec ...

  • Toshiba MK4006GAH - page 148

    Toshiba Corporation Digital Media Network Company Page 148 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved b) The host writes the command code t o the Comm and register. c) The d rive sets the BSY bit . d) Wh en the drive has fini shed processing a sector (or block) of data, it cl ears the BSY bit and asserts INTRQ. e) In response ...

  • Toshiba MK4006GAH - page 149

    Toshiba Corporation Digital Media Network Company Page 149 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 12.4 DMA data transfer commands Commands for this class are: • READ DMA (with and wit hout retry) • READ DMA EXT • WRITE DMA (with and without ret ry) • WRITE DMA EXT Data transfers using DMA commands diffe r in two w ...

  • Toshiba MK4006GAH - page 150

    Toshiba Corporation Digital Media Network Company Page 150 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 12.5 Ultra DMA Ultra DMA protocol is used with Read DMA, and Wri te DMA commands. Ultra DMA modes are set by Set features command. Since the setting after power-up ( De fault setting ) is mode 2 of Multi Word DMA, Set Feature ...

  • Toshiba MK4006GAH - page 151

    Toshiba Corporation Digital Media Network Company Page 151 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 3. Ultra DMA burst termination phase a) Either a sender or a recipient may terminate an Ultra DMA burst. b) Ultra DMA burst termination is not the same as command termination or completion. If an Ultra DMA burst termination o ...

  • Toshiba MK4006GAH - page 152

    Toshiba Corporation Digital Media Network Company Page 152 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Combinational Logic Edge Trigger ed Register Device CRCOUT (15:0) CRCIN (15:0:) DD(15:0) f1-f1 6 Wo r d Clock CRCIN0 = f16 CRCIN8 = f8 XOR f13 CRCIN1 = f15 CRCIN9 = f7 XOR f12 CRCIN2 = f14 CRCIN10 = f6 XOR f11 CRCIN3 = f13 CR ...

  • Toshiba MK4006GAH - page 153

    Toshiba Corporation Digital Media Network Company Page 153 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 12.6 Other timings See HOST INTERFACE section for timings which are not shown here. Table 12.6-1 Other timings. Function and Intervals Tim eout • POWER ON TIMINGS From power on to BSY=1 400 ns maxim um From Power on to BSY= ...

Fabricant Toshiba Catégorie Computer Drive

Les documents que nous recevons du fabricant de l'appareilToshiba MK4006GAH peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Toshiba
- manuels d’utilisations MK4006GAH
- fiches produit Toshiba
- dépliants
- ou étiquettes-énergie Toshiba MK4006GAH
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Toshiba MK4006GAH.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Toshiba MK4006GAH, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Toshiba MK4006GAH. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Toshiba MK4006GAH.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Toshiba MK4006GAH, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Toshiba MK4006GAH par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Toshiba MK4006GAH.

Le manuel d’utilisation complet Toshiba, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Toshiba MK4006GAH - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Toshiba MK4006GAH, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lToshiba MK4006GAH qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Toshiba MK4006GAH - qui devraient nous aider dans les premières étapes lors de l'utilisation Toshiba MK4006GAH
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Toshiba MK4006GAH
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Toshiba MK4006GAH dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Toshiba MK4006GAH?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Toshiba MK4006GAH, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Toshiba MK4006GAH il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)