Les documents que nous recevons du fabricant de l'appareilAvermedia NV 1000 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Avermedia
- manuels d’utilisations NV 1000
- fiches produit Avermedia
- dépliants
- ou étiquettes-énergie Avermedia NV 1000
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Avermedia NV 1000.
- UserManuals.org
- Avermedia
- Avermedia DVR
- Avermedia NV 1000
Manuel d’utilisation Avermedia NV 1000
Aller à la page of 169
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 168
- 169
Summary
-
Avermedia NV 1000 - page 1
AVerMedia NV 1000/3000/5000/7000 Digital Video Recording Sy stem User’s Manual ...
-
Avermedia NV 1000 - page 2
Preface ii FCC NOTICE This device has be en tested and found to c omply with th e limits for a Cl ass A digital device, pursuan t to Part 15 of the FCC Rules. T hese limits are designed to provide reas onable protecti on against harmf ul interference in a commercial, in dustrial or business environment. This equip ment can gene rate, use and radiat ...
-
Avermedia NV 1000 - page 3
AVerMedia NV1000/3000/5000/7000 Use r’s Manual DISCLAI MER No warrant y or repres entation, ei ther expres sed or implied, is made with respect to the cont ents of this docum entation, its quali ty, perform ance, merchantabili ty, or fitness for a particula r purpose. Info rmation pres ented in this documentat ion has been carefully checked for r ...
-
Avermedia NV 1000 - page 4
Table of Contents iv T ABLE OF CONTENTS Package Contents for NV 1000 .............................................................. vii Package Contents for NV 3000 ............................................................. viii Package Contents for NV 5000 ............................................................. viii Package Contents for N ...
-
Avermedia NV 1000 - page 5
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 1.10 Connecting POS (Not Supplied) ...................................................... 43 CHAPTER 2 INST ALLING SOFTW ARE ........................................... 44 2.1 Installing NV1000/3000/5000 Application Software ................................ 4 5 2.1.1 Installing NV1000/3000/5000 Appli ...
-
Avermedia NV 1000 - page 6
Preface vi 4.1.4 Alarm S tatus and Reset ..................................................... 111 4.2 How to Playback the Videos ......................................................... 11 1 4.2.1 Setting the Video Playback Date and T ime .............................. 111 4.2.2 Playing the Videos ................................................. ...
-
Avermedia NV 1000 - page 7
AVerMedia NV1000/3000/5000/7000 Use r’s Manual PREFACE Welcome to the realm of A VerMedia. A V erMedia DVR digit al surveillance system, composed of one 32-bit PCI Video Capture Ca rd, works as a digital video surveillance system. It enables you to capture true color images and real-time videos from 4-16 camera inputs simult aneously . With the l ...
-
Avermedia NV 1000 - page 8
Preface viii Package Contents fo r NV 3000 A V erMedia NV 3000 DIGIT AL SURVEILLANCE SYSTEM package includes the following items : 1. 1 A V erMedia DVR Video Capture Card 2. 1 30 CM W atchdog line 3. 1 20 CM Video signal line 4. 1 Software CD (including driver , applic ation software and 1 User’s Manual 5. 1 Quick S tart Guide Package Contents ...
-
Avermedia NV 1000 - page 9
AVerMedia NV1000/3000/5000/7000 Use r’s Manual Package Contents fo r NV 7000 A complete NV 7000 surveillance system package includes the follow ing items: 1. 1 NV 7000 Video capture card 2. 1 I/O card 3. 1 Video and audio connection cable 4. 1 30 CM W atchdog line 5. 1 20 CM Video signal line 6. I/O connection cable 7. Quick St art Guide 8. 1 Sof ...
-
Avermedia NV 1000 - page 10
Preface x NV 1000/ NV 3000 Video Capture Card Sp ecifications NV 5000 Video Capture Card Specifications The video card in the package meets the following specifications: Product Video Card Specifications NV 1000 NV 3000 1 card One Video Capture Card with 4 BNC connectors and 1 TV -out slot. Product Video Card Specifications NV 5000 1 card One Video ...
-
Avermedia NV 1000 - page 11
AVerMedia NV1000/3000/5000/7000 Use r’s Manual NV 7000 Video Capture Card Sp ecifications Manual Conventions The following conventions are used throughout this manual. T ype St ands for Example [paren.] Keys on the keyboard [Enter] “Quotes” Words to be typed in “A V erMedia” Italic User in each authorization level Administrator Bold Name ...
-
Avermedia NV 1000 - page 12
Preface xii Informational Message: These messages are intended to provide additional information for the purpose of clarification. ...
-
Avermedia NV 1000 - page 13
AVerMedia NV1000/3000/5000/7000 Use r’s Manual LIMITED WARRANTY A V erMedia TECHNOLOGIES, Inc. warrant s that this product to be free of defects re sulting from faulty manufacturing or components under the following terms: W ARRANTY LENGTH Labor is warranted for 15 months from the date of purchase. Replacement product s will be warrante d for the ...
-
Avermedia NV 1000 - page 14
Preface xiv WHA T WE WILL A ND WILL NOT P A Y FOR We will p ay labor and material expenses for covered item s. However , we will not p ay for the follo wing: 1. Removal or installation charges. 2. Shipping charges. 3. Any incidental charges. EXCLUSION OF DA M AGES THE MANUF ACTURER’S SOLE OBLIGA TION AND LIABILITY UNDER THIS WARRANTY IS LIMITED T ...
-
Avermedia NV 1000 - page 15
...
-
Avermedia NV 1000 - page 16
Chapter 1 Installing Hardware 16 Chapter 1 Installing Hardware A V erMedia digital surveillance system is a digital surveillance system that support s Windows 2000/XP . Please follow the steps to inst all the hardware. 1.1 Hardware Recommendations Please make sure you follow the minimum s ystem requirement when putting togeth er a PC for the NV ser ...
-
Avermedia NV 1000 - page 17
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 1.2 NV 1000/3000/500 0/7000 Hardw a re Installation Combinations The following instructions are for installing Video Capture Cards into the A V erMedia DVR digital surveillance system. The DVR system has a powerful surveillance function and a fle xible combination when you install the hardware. This ...
-
Avermedia NV 1000 - page 18
Chapter 1 Installing Hardware 18 NV 5000 system hardware installation combinations: Hardware Combinations Video Capture Card numbers Video Extension Card numbers Audio / IO Card Number Number of Video channels Number of Audio channels Sensor Inputs Relay Outputs 0 4 0 0 0 0 1 4 4 4 3 0 8 0 0 0 1 1 8 4 4 3 0 12 0 0 0 2 1 12 4 4 3 0 16 0 0 0 1 3 1 16 ...
-
Avermedia NV 1000 - page 19
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 1.3 NV 1000 DVR Hardw are Installation Before installing the video card, turn off the co mputer ’s power , unplug the pow er cable and disconn ect all other cables attached to the back of the computer. Please follow the steps to inst all the system. 1. Remove the PC case cover . 2. Remove brackets ...
-
Avermedia NV 1000 - page 20
Chapter 1 Installing Hardware 20 1.4 NV 3000 DVR Hardw are Installation Before installing the video card, turn off the co mputer ’s power , unplug the pow er cable and disconn ect all other cables attached to the back of the computer. Users can purchase optional I/O Audio Cards if it is necessary . 1.4.1 Install One V ideo Capture Card and One Au ...
-
Avermedia NV 1000 - page 21
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 1.4.2 Install 2 V ideo Capt ure Cards and 2 Audio Cards 1. Please follow the steps to inst all the system. Remove the PC case cover . 2. Remove 4 brackets for the PCI slots. Save the screws. 3. Connect the Audi o Card and the Video Capture Card with the conne ction cable. 4. Connect the 2 Video Captu ...
-
Avermedia NV 1000 - page 22
Chapter 1 Installing Hardware 22 1.4.3 Install 4 V ideo Capt ure Cards Please follow the steps to inst all the system. 1. Remove the PC case cover . 2. Remove 4 brackets for the PCI slots. Save the screws. 3. Connect the Video Capture Cards with Connection cables. 4. Connect the 2 Video Capture Cards with a connection cable. Insert all the cards an ...
-
Avermedia NV 1000 - page 23
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 1.5 NV 5000 DVR Hardw are Installation 1.5.1 Installing One A V erMedia DVR Video Capture Card Before installing the video card, turn off the co mputer ’s power , unplug the pow er cable and disconn ect all other cables attached to the back of the computer. Please follow the steps to inst all the v ...
-
Avermedia NV 1000 - page 24
Chapter 1 Installing Hardware 24 1.5.2 Installing Optional I/O Audio Card and Video Extension Cards Before installing the video card, turn off the co mputer ’s power , unplug the pow er cable and disconn ect all other cables attached to the back of the computer. Users can purchase an optional I/O Audio Card and Video Extension Cards if it is nece ...
-
Avermedia NV 1000 - page 25
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 3. Insert the Video Capture Card and Video Extension Cards into the available PCI slots and fix them. It is important to fix the cards in sequenc e to avoid video transmission trouble. 4. Connect the 4 cards with I/O cables as the following picture. 5. The lower-right picture is the back panel of 1 V ...
-
Avermedia NV 1000 - page 26
Chapter 1 Installing Hardware 26 4. Installing 2 Video Capture Cards and 2 Video Extension Cards For users who install 2 Video Capture Cards, please follow the steps. 1. Remove the brackets of PCI slots. 2. Insert the V ideo Capture Cards and Video Extension Cards into the PCI slots in sequence and fix them. Y ou will see the back pa nel of each ca ...
-
Avermedia NV 1000 - page 27
AVerMedia NV1000/3000/5000/7000 Use r’s Manual ...
-
Avermedia NV 1000 - page 28
Chapter 1 Installing Hardware 28 1.6 NV 7000 DVR Hardw are Installation 1.6.1 Installing One A V erMedia NV 7000 Video Capture Card Before installing the video card, turn off the co mputer ’s power , unplug the pow er cable and disconn ect all other cables attached to the back of the computer. 1. Remove the computer cover . 2. Remove a bracket fo ...
-
Avermedia NV 1000 - page 29
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 1.6.2 Installing 4 NV 7000 Video Capture Cards Before installing the video card, turn off the co mputer ’s power , unplug the pow er cable and disconn ect all other cables attached to the back of the computer. For users who install more than 1 Video Capture Cards, please follow the steps. 1. Remove ...
-
Avermedia NV 1000 - page 30
Chapter 1 Installing Hardware 30 1.6.3 Inst alling an I/O Card Each Video Capture Card can come with an optional I/O card that enables to connect sensor inputs and relay output s. For NV7000 users who only install an optional I/O card, please follow the steps. 1. Remove the computer cover . 2. Remove 2 brackets for PCI expansion slots. Save screws. ...
-
Avermedia NV 1000 - page 31
Chapter 1 Installing Hardware 32 1.7 Connecting the Watchdog line 1.7.1 Connecting the Watchdog line to NV 1000/3000/5000 After you finish installing the V ideo Capture Card, Video Extension Cards or the I/O Audio Card, please connect the reset cable of the PC case to the Video Capture Card, and then connect the Video Capture Card and Motherboard w ...
-
Avermedia NV 1000 - page 32
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 1.7.2 Connecting the Watchdog line to NV 7000 Before installing the video card, turn off the co mputer ’s power , unplug the pow er cable and disconn ect all other cables attached to the back of the comput er . When you install ONE NV 7000 video capture card, please follow the instruction to connec ...
-
Avermedia NV 1000 - page 33
Chapter 1 Installing Hardware 34 1.8 Connecting Cameras and TV-out Cable 1.8.1 Connecting Cameras an d TV -out Cable to NV 1000/ 3000/5000 After you finish installing the cards, pl ease connect the BNC cable and the TV -out cable to the Video Capture Card as below figure. When you attach cameras to BNC connectors, please follow a num erical order i ...
-
Avermedia NV 1000 - page 34
AVerMedia NV1000/3000/5000/7000 Use r’s Manual Y ou must attach each camera and audio channel to the BNC connectors of the Video Capture card in a specific order to av oid transmission problems. The Video Capture card is stacked vertically into the chassis. Each V ideo Capture Card can support up to 4 cameras and 4 audio channels. 1 BNC c able co ...
-
Avermedia NV 1000 - page 35
Chapter 1 Installing Hardware 36 Camera 2 to Camera 10 Audio 2 to Audio Channel 10 Camera 3 to Camera 1 1 Audio 3 to Audio Channel 1 1 Capture Card 3 Camera 4 to Camera 12 Audio 4 to Audio Channel 12 Camera 1 to Camera 13 Audio 1 to Audio Channel 13 Camera 2 to Camera 14 Audio 2 to Audio Channel 14 Camera 3 to Camera 15 Audio 3 to Audio Channel 15 ...
-
Avermedia NV 1000 - page 36
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 1.9 Connecting External Sensors/Relays to NV1000/3000/500 0/7000 1.9.1 Connecting External Sen sors/Relays to NV1000/3000/50 00 The I/O Audio card enables you to connect 4 sen sor inputs and 3 relay outputs. Y ou need to use 1 D-type 15 Pin connector cable to connect the external I/O box and the I/O ...
-
Avermedia NV 1000 - page 37
Chapter 1 Installing Hardware 38 Relay Outputs Y ou can also attach external output control devices such as alarms to the A V erMedia digital surveillance system’ s output connectors (relay out puts). Y ou can then configure the system to activate or deacti vate these devices. Each A V erMedia video card supports 3 relay outputs. T wo of them are ...
-
Avermedia NV 1000 - page 38
AVerMedia NV1000/3000/5000/7000 Use r’s Manual Pin Signals and Specifications The pin signals and specifications for the ex ternal I/O B ox and the D-type 15 -pin connectors are described below . A. Sensor Input S pecification Relay Output Specification Surge strength: 1500 V AC Nominal power: 200mw ~ 360mw Operating power: 1 10m w ~ 200mw B. COI ...
-
Avermedia NV 1000 - page 39
Chapter 1 Installing Hardware 40 C. CONT ACT RA TINGS Cont act A rrangement 1 Form C (SPDT) max. Switch Power max. Switch voltage max. Switch current 125V A 60W 125V AC 30VDC 1A Contact Resist ance 100m Ω Resistive Load 1A/125V AC 1A/30VDC Contact Material AgNi10 D. External I/O Box pin si gnals Pin # Definition 1 INPUT SIGNAL 1+ 2 INPUT SIGNAL 2 ...
-
Avermedia NV 1000 - page 40
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 1.9.2 Connecting External Sen sors/Relays to NV7000 The I/O Audio card enables you to connect 4 sensor inputs and 3 relay outputs. The pin signals for the I/O card are as follow ed. Please follow the pin signal assignments to connect the devices. Pin # Definition Pin # Definition 1 Sensor 1 input sig ...
-
Avermedia NV 1000 - page 41
Chapter 1 Installing Hardware 42 Relay Output Specification Surge strength: 1500 V AC Nominal power: 200mw ~ 360mw Operating power: 1 10m w ~ 200mw ...
-
Avermedia NV 1000 - page 42
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 1.10 Connecting POS (Not Suppl ied) Some users may install POS (Point of Sales) to facilitate the sales management. The system saves your time to install the PO S system. Just connect your DVR system and POS with a RS232 cable as the following illustration. Connect the RS232 connectors to both POS an ...
-
Avermedia NV 1000 - page 43
Chapter 2 Instal ling Software 44 Chapter 2 Installing Software This chapter describes how to install the Video Capture Card driver and required software to st art and use A V erMedia DVR s ystem. Please update Windows patches and your Graphic Card dri ver before installing the DVR software. Before you install the software that comes on the CD, ple ...
-
Avermedia NV 1000 - page 44
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 2.1 Installing NV 1000/3000/5000 Appli cation Software Once you have successfully completed inst alling V ideo Capture Cards, please follow the steps to install the DVR sof tware first. After you completed the software inst allation, please install the driver . Please disable hyper threadin g from yo ...
-
Avermedia NV 1000 - page 45
Chapter 2 Instal ling Software 46 2.1.1 Installing NV1000/3000/5000 A pplication in Wind ows 2000/XP After installing the hardw are prop erly , please power on your comp uter and follow the steps to inst all the application. If you have onl y one single hard dri ve, please divide the hard drive into two partitions. Install the Operating System on t ...
-
Avermedia NV 1000 - page 46
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 3. Click Ye s to accept the agreement. Click OK to continue. 4. Enter the Company Name and CDKey . 5. Enter User Name and Password. Click Next to continue. 6. Select a program folder . Click Nex t to continue. ...
-
Avermedia NV 1000 - page 47
Chapter 2 Instal ling Software 48 7. Select a video system, and click Next to continue. 8. Select the Video Extension Card quantity and click Next to continue. 9. The system starts installing the application. 10. Select “ Y es, I want to restart my computer now ” and click Finish to complete the installation. The system will reboot automaticall ...
-
Avermedia NV 1000 - page 48
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 2.2 Installing NV 7000 Application Software Once you have successfully completed inst alling V ideo Capture Cards, please follow the steps to install the DVR sof tware first. After you completed the software inst allation, please install the driver . If you have onl y one single hard dri ve, please d ...
-
Avermedia NV 1000 - page 49
Chapter 2 Instal ling Software 50 2.2.1 Inst alling NV7000 A pplication in Win dows 2000/XP After installing the hardw are prop erly , please power on your comp uter and follow the steps to inst all the application. 1. Insert the Software CD to your CD- ROM driver and click Install Surveillance System to continue. 2. Click Next to continue. 3. Clic ...
-
Avermedia NV 1000 - page 50
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 4. Enter the Comp any Name and CDKey . 5. Enter User ID and Password . Click Next to continue. 6. Select a program folder . The default program folder name is NV 7000 .Click Nex t to continue. 7. The system starts inst alling the application. ...
-
Avermedia NV 1000 - page 51
Chapter 2 Instal ling Software 52 9. Select “ Yes, I want to res t art m y computer now ” and click Finish to complete the installation. The system will reboot automatically to initiate a new setting after you finish the installation. Y ou will see on your desktop. Please install the driver before using the application. ...
-
Avermedia NV 1000 - page 52
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 2.3 Installing NV100 0/3000/5000 Dri ver 2.3.1 Installing NV1000/3000/5000 driver in Windows 2000 After the sof tware installation, the system will reboot. Remove the software CD in the CD-Rom. The Windows system automatically detects a new hardware and show the following dialog box. Click Ye s to co ...
-
Avermedia NV 1000 - page 53
Chapter 2 Instal ling Software 54 When your drivers are succe ssfully inst alled, click to run the surveillance system. ...
-
Avermedia NV 1000 - page 54
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 2.3.2 Inst alling NV1000/3000/5000 driver in Window s XP After the sof tware installation, the system will reboot. Remove the software CD in the CD-Rom. The Windows system automatically detects a new hardware and shows the right dialog box. Please click Cancel . The system will st art to search for t ...
-
Avermedia NV 1000 - page 55
Chapter 2 Instal ling Software 56 Y ou will see the following dialog box. Click Finish . Repeat the same procedure until all the video drivers have been comple tely installed. After the video driver inst allation, the system will request to install the audio driver . Y ou will see the right dialog appear on the screen. Please click Cancel . The sys ...
-
Avermedia NV 1000 - page 56
AVerMedia NV1000/3000/5000/7000 Use r’s Manual After the searching, you will see the right dialog box. Please click Continue Anywa y to install the driver . The system will show the inst allation status. Click Finish . Repeat the same procedure until all the audio drivers have been completely installed. After the audio driver installation, please ...
-
Avermedia NV 1000 - page 57
Chapter 2 Instal ling Software 58 When your drivers are succe ssfully inst alled, click to run the surveillance system. 2.4 Installing NV7000 Driver 2.4.1 Installing NV7000 driver in Windows 2000 After the sof tware installation, the system will reboot. Remove the softwa re CD in the CD-Rom. The Windows system automatically detects a new hardware a ...
-
Avermedia NV 1000 - page 58
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 4. Click Finish . The system may repeat the driver installation according to the quantities of cards. After you finish the installation, please check the device manager to see if all the drivers are successfully inst alled. When your drivers are succe ssfully inst alled, click to run the surveillance ...
-
Avermedia NV 1000 - page 59
Chapter 2 Instal ling Software 60 2.4.2 Installing NV7000 driver in Windows XP After the sof tware installation, the system will reboot. Remove the softwa re CD in the CD-Rom. The Windows system automatically detects a new hardware and shows the right dialog box 1. Please click Cancel . The system will start to search for the video driver . Y ou wi ...
-
Avermedia NV 1000 - page 60
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 4. Click Finish . The system may repeat the driver installation according to the quantities of cards. After you finish the installation, please check the device manager to see if all the drivers are successfully inst alled. When your drivers are succe ssfully installed, click to run the surveillance ...
-
Avermedia NV 1000 - page 61
Chapter 2 Instal ling Software 62 2.5 Remo ving Video Capture Card Driver On occasion, it may become necessary to remove your video card software driver . T o remove the driver , follow the steps described below . 1. Click Start and then go to setti ngs to open Control Panel . 2. Double click Add/Re move Program icon . 3. Depending on your DVR vers ...
-
Avermedia NV 1000 - page 62
AVerMedia NV1000/3000/5000/7000 Use r’s Manual Chapter 3 Configuring the System Before you start running the DVR s ystem, please set your monitor resolution t o 1024 x 768 and the color to 16-bit true color or above. 3.1 Logging in for the first time Click to initiate A verMedia DVR system. The system will request an authorization when you initia ...
-
Avermedia NV 1000 - page 63
Chapter 3 Configuring the System 64 3.1.1 Introducing the Func tions buttons on Di splay/Playback The application screens used in this manual are from NV 5000 syst em. Monitor Screen The functions of buttons on the Monitor Screen are as followed. 1. Exit Click this item to minimize or exit the system. The DVR system will confirm your authorization ...
-
Avermedia NV 1000 - page 64
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 1-Cam display 4-Cam split display 9-Cam split display 16-Cam spli t displa y 8-Cam split display 13-Cam spli t displa y If you onl y have 4 cameras c onnected, the 8-Cam/9- Cam/13- Cam/16-Cam split display modes will be disabled automaticall y. 3. Date/Time/Free Sp ace This bar shows the current time ...
-
Avermedia NV 1000 - page 65
Chapter 3 Configuring the System 66 display mode, you can click a desired button to play the desired channel. After you click the icon, it turns yellow . If you assign a split display mode and appoint a camera number , the icon group of the cameras will turn yellow altogether . 11. E vent Log Y ou can check Ev ent, Operation, POS (Point of Sales), ...
-
Avermedia NV 1000 - page 66
AVerMedia NV1000/3000/5000/7000 Use r’s Manual Playback Screen 18. Slider Drag the scroll box to go forward/backward to the desired event. 19. Pla yback Control Buttons Begin: Move to the beginning of the video recordi ng. Previous: Go back to the previous frame. Slower: Play the video recording at the speed of 1/2x, 1/4x, o r 1/8x ...
-
Avermedia NV 1000 - page 67
Chapter 3 Configuring the System 68 Rewind: Play the video file reversely . Pause: S top playing the recording file. Play: Play the recording file. Faster: Pla y the video recording at the speed of 2x, 4x, or 8x. Next: Go to the next frame. End: Go to the end of the video recording. 20. Select Pla y Date Y ou can play an appointed recording by assi ...
-
Avermedia NV 1000 - page 68
AVerMedia NV1000/3000/5000/7000 Use r’s Manual through these serial images. 27. E vent Log Click to see event, operation, POS, system or netw ork logs. Select date and an event item. The system will show the logs in the lower t able in the Event Log Viewer dialog. 28. Save The DVR system allows you to save static recording images. Y ou can catch ...
-
Avermedia NV 1000 - page 69
Chapter 3 Configuring the System 70 3.2.1 System Settin g Click to configure basic settings. 1. Storage Path Y ou can see the current storage path. T o change the path or add a new storage path, please click Ad d and select a desired folder . T o delete a path, please select the path and click Delete . There must be at least one storage path. The s ...
-
Avermedia NV 1000 - page 70
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 2. Desk T op lock The DVR system provides a desktop lock f unction to avoid any mischievous system shutdown. Y ou can select “Desktop Lock” to lock the tool tray on desktop to avoid unauthorized users using hot keys (Ctrl + Alt + Del) or to shut down the DVR application. 3. Beep if no signal Y ou ...
-
Avermedia NV 1000 - page 71
Chapter 3 Configuring the System 72 7. Language Y ou can click the drop-down list to sele ct a desired language. The default language is English. 8. Video System Please select a proper video system according to your local video system. For NTSC system, please select NTSC. For P AL system, please select P AL. If you choose a wrong video system, the ...
-
Avermedia NV 1000 - page 72
AVerMedia NV1000/3000/5000/7000 Use r’s Manual The UPS application m ust meet Window NT or above system requirements. Windows 2000 or Windows XP are recommended. ...
-
Avermedia NV 1000 - page 73
Chapter 3 Configuring the System 74 3.2.2 Camera Settin g Click to set up the cameras. 1. Camera Icons The bar below shows cameras that are connected to your DVR systems. When the number inside the camera icon lights up, it means the camera is connected to the system. A DVR system supports up to 16 cameras. T o set up the camera, just click desired ...
-
Avermedia NV 1000 - page 74
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 3 Camera Display: After enabling the camer a, the default setting allowed you seeing the real-time video on the screen. If you need video recorded but don’t want to show the real-time video, uncheck the box.. Name: Enter a name for the cam era. Comment: Enter some descriptions for the camera. Click ...
-
Avermedia NV 1000 - page 75
Chapter 3 Configuring the System 76 make video image clearer when you pr eview or playback the video file. 6 Auto Brightness Con trol and Night View The video image quality of outside cameras may be affected by insolation and weather , thus the image can be too strong or too weak. The system provides “ Auto Brightness Control ” to improve image ...
-
Avermedia NV 1000 - page 76
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 3.2.3 Recording Setting (Video and Audio) Click to configure the recording setting. 1 Camera Icons The bar below shows cameras that are connected to your digital surveillance system. When the number inside the camera icon lights up, it means the camera is connected to the digital su rveillance system ...
-
Avermedia NV 1000 - page 77
Chapter 3 Configuring the System 78 T o set up the camera, just click the desired camera icon. When you configure an appointed camera, the camera icon turns red. Right click to select multiple camera icons or tick “ Al l ” bo x. When you select all cameras, you will see the following picture. When you select all cameras, the screen inside the w ...
-
Avermedia NV 1000 - page 78
AVerMedia NV1000/3000/5000/7000 Use r’s Manual Users can define the recording mode in appointed hours according to their demands. The default setting is always recording which means the blocks on the time bar are all blue. Y ou can select one of the recording modes: Always Recording: The s ystem will record this appointed channel when it starts t ...
-
Avermedia NV 1000 - page 79
Chapter 3 Configuring the System 80 3 Enable Audio: For NV1000/3000/5000 users, select an audio channel to map the video channel if you want to monitor and re cord the audio of this appointed channel with video. NV1000/3000/5000 system allows 4 audio channels. Users can select ONE desired channel and map it to the video channel that is monitoring. ...
-
Avermedia NV 1000 - page 80
AVerMedia NV1000/3000/5000/7000 Use r’s Manual resolution 640x480. Y ou can modify the setting to resolution 640x 480 for a better video image quality . The higher resolution will result in a larger video size. 640x480 (enhanced) mode provides a higher video quality than 640x480 mo de, thus the image quality will be better;how ever , the file siz ...
-
Avermedia NV 1000 - page 81
Chapter 3 Configuring the System 82 NV 7000 only supports MPEG4 compression format. 9 Mask/Shield Edit T ick Shield or Mask box according to your demands. 10 Mask: T ick Mask box to enable t his function. Y ou can tick “ Show Mask ” and select a color . Move your cursor to the screen and then click the left button to mask a specific area. T o c ...
-
Avermedia NV 1000 - page 82
AVerMedia NV1000/3000/5000/7000 Use r’s Manual NV 7000 does not pro vide the Shield function. Please use Shield ver y carefully to avoid missing an y import ant video data. Click OK to save settings. Y ou will return to the DVR configuration setup screen. Click to return the main menu. Y ou need to click on Monitor Screen to record the video, and ...
-
Avermedia NV 1000 - page 83
Chapter 3 Configuring the System 84 While the recording task is in process, t he icon turns red. Click the icon again to stop the recording task. The icon will return to gray . 3.2.4 Network Setting Click to start the networking configuration. T r ansmitting Ca meras T ransmitting cameras allow users to monito r remotely . Y ou can decide which cam ...
-
Avermedia NV 1000 - page 84
AVerMedia NV1000/3000/5000/7000 Use r’s Manual Enable Handy View: The system provides “Handy Vi ew” function to enable remote users to use a PDA or a mobile phone for remote monitor . Select the item, Enable Handy View , to enable remote users to connect the DVR server b y PDA or mobile phone. For more information, please check 5.3 Handy View ...
-
Avermedia NV 1000 - page 85
Chapter 3 Configuring the System 86 3.2.5 Schedule Setting Click to setup Schedule. Y ou can schedule recording, backup or r eboot schedule by day or by period. Click or to adjust to a proper month. The system will mark the present date. Y ou will see a drop-down list on the upper right place. Drag the list to select a schedule task. The items in t ...
-
Avermedia NV 1000 - page 86
AVerMedia NV1000/3000/5000/7000 Use r’s Manual recording mode you set for each camera. That means, even if you have set the camera to “ Motion Recordi ng ” mode , the cameras will still start “ Always recording” mode at the scheduled time. Click Save to store the schedule setting of this t ask. Click Clear to remove all schedule setting o ...
-
Avermedia NV 1000 - page 87
Chapter 3 Configuring the System 88 Reboot: If you s elect Reboot as the task, the system will reboot at the appointed time. Once it reboots the system successfully , the s ystem will not reboot again in the same hour . Click Save to store the schedule setting of this t ask. Click Clear to remove all schedule setting of this task. If your Windows ? ...
-
Avermedia NV 1000 - page 88
AVerMedia NV1000/3000/5000/7000 Use r’s Manual Enable Network: When you select Network and set a schedule in Sched ule Setting , the system will allow inbound connections to monitor remotely during the appointed period of time. After the appoint ti me, the connection service will be stopped. Click Save to store the schedule setting of this t ask. ...
-
Avermedia NV 1000 - page 89
Chapter 3 Configuring the System 90 Disable Alarm: The Disable Alarm will disable the alarm function temporarily during the assigned period of time. Users can fully use this function and avoid unnecessary alarms during specific time. After the appointed time, the alarm function will execute automatically as it is configured. There are 2 schedule mo ...
-
Avermedia NV 1000 - page 90
AVerMedia NV1000/3000/5000/7000 Use r’s Manual Y ou can onl y set future dates for a sched ule. Dates in the past are not accepted. One Time: When you select One T ime as a single schedule unit, it means the system executes the recording only one time during the appointed hours. Y ou can move your cursor to the calendar and appoint a specific dat ...
-
Avermedia NV 1000 - page 91
Chapter 3 Configuring the System 92 3.2.6 Backup Setting Click to backup the recording files. The Backup Setting dialog will appear . 1. Calendar Choose a backup date. The circled date is consistent with the system date. 2. Backup files Information Selected Files: Blue blocks mean that there are video recording data during the period of time. Selec ...
-
Avermedia NV 1000 - page 92
AVerMedia NV1000/3000/5000/7000 Use r’s Manual For example, if you backup the files in CD-R partition, it will backup and pack the files into several folders. Each size is smaller than 650Mb. 4. Delete files after Backup Delete files after Backup: T ick to delete the selected files after backup. Cancel the tick to keep the file in the server . 5. ...
-
Avermedia NV 1000 - page 93
Chapter 3 Configuring the System 94 Click the blue blocks to assign the desired backup files. The appointed backup files turn red. Click to clear all the selected files. Af ter backup files are selected, the system will calculate the f ile quantities and required space automatically , and show the results on the screen. Click to backup the selected ...
-
Avermedia NV 1000 - page 94
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 3. Content After you enable the appointed sensor , the s ystem will automatically show the Card No. and Input No. in the following Content col umn. Enter the comment in the blank. The following illustrations of the sensor inputs describe the pin assignment s. External I/O box for NV 1000 /3000/5000 T ...
-
Avermedia NV 1000 - page 95
Chapter 3 Configuring the System 96 The following table shows NV 7000 I/O card pin assignments. Pin # Definition Pin # Definition 1 Sensor 1 input signal 11 Relay Normal Close 1 2 Sensor 1 output signal 12 Relay Comment 2 3 Sensor 2 input signal 13 Relay Normal Open 2 4 Sensor 2 output signal 14 Relay Normal Close 2 5 Sensor 3 input signal 15 Relay ...
-
Avermedia NV 1000 - page 96
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 3.2.8 Relay Settin g Click to set up relays. 1. Relay ID Assign a relay by clicking the drop-down menu , and enter its name in the name field. 2. Enable T ick to enable this relay . Cancel the tick to disable the relay . 3. Content After you enable the appointed relays, the system will automatically ...
-
Avermedia NV 1000 - page 97
Chapter 3 Configuring the System 98 4. T est After inst alling relays, you can test relays immediately . Click to find the relay status: or inside the T est column. Click to finish the setting or click to cancel the setting. After finish configuring sensors and rela ys, you can go to Alarming Setting to set alarms. When the appointed events happen, ...
-
Avermedia NV 1000 - page 98
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 1. Select Device: Click the drop-down menu to select camera or sensor . 2. Select Camera: The bar below shows cameras that are connected to your DVR system. When the number inside the camera icon lights up, it means the camera is connected to the DVR system. The DVR system supports up to 16 cameras. ...
-
Avermedia NV 1000 - page 99
Chapter 3 Configuring the System 100 4. Conditions: This column shows the alarm tr iggered condition. T ick Motion or Video Loss boxes as the condition. Motion: When you click Motion as an alarm condition, the system will treat motion as an event to trigger the alarm. Video Loss: When you click Video Loss as an alarm condition, the sy stem ...
-
Avermedia NV 1000 - page 100
AVerMedia NV1000/3000/5000/7000 Use r’s Manual tick to disable the function. Click to set up the directory . Click to assign the path of an assigned .W A V file. Click to play the .W A V file. Y ou can also click to create a new file. The system pops up the following sound recorder . T o record a new sound file, you can click to record a new reco ...
-
Avermedia NV 1000 - page 101
Chapter 3 Configuring the System 102 Click to add a new Call Out setting . Enter Phone Number , Comment and click to import the voice file. If you need to record your voice file, click . The sound recorder will appear . T o record a sound file, you can click to record a new rec ording. When you finish the recording, click to stop. Go to File and th ...
-
Avermedia NV 1000 - page 102
AVerMedia NV1000/3000/5000/7000 Use r’s Manual file. It returns to the “ Call Out List” when you finish this step. Click to keep the setting or to cancel the setting. Y ou will see the new setti ng in the table below . Click to adjust the setting, or to delete the setting if necessary . T o test the setting, you can select the item and click ...
-
Avermedia NV 1000 - page 103
Chapter 3 Configuring the System 104 and Password. ID and Password: Ente r your ID and pa s sw or d of SMTP server so that the system can send the alarm by E-mail. B. Mail From: Enter the mail sender ’s E-mail address. To : Enter the ma in receivers’ email address. CC: Enter the copy list of mail receivers. Subject: Enter the E-mail title. Mess ...
-
Avermedia NV 1000 - page 104
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 3.2.10 User Settin g Click to set up user setting. Click to add a new user . Y ou will see the following screen. Please follow the steps to set user settings. 1 Authorization Le vel Select the authorization level as User or Ad mi ni str at or . Only the Administrator can change the user settings. 2 C ...
-
Avermedia NV 1000 - page 105
Chapter 3 Configuring the System 106 3 Remote Visible Cameras The DVR provides a feature to allow di fferent users to see different channels via WebCam and remote console. The administrator can create and define remote users’ authorization level to differ entiate their control rights. For inst ance, you can let lesser important users to monitor l ...
-
Avermedia NV 1000 - page 106
AVerMedia NV1000/3000/5000/7000 Use r’s Manual Chapter 4 Using the System 4.1 How to Monitor the Videos Please switch to Monitor Screen to monitor all channels in real-time. The system provides a function of real-time monitoring. 4.1.1 Select the Split Display Mode Before you use full screen display to moni tor the videos, you can select the disp ...
-
Avermedia NV 1000 - page 107
Chapter 4 Using the System 108 If you only have 4 cameras connected, the 8-Cam/ 9-Cam/13-Cam/16-Cam split display modes will be disabled automatically . 8-Cam Split Display Click to split the screen into a 8-Cam split display. The system will display the first batch of ca mer as, Camera 1 to Camera 8, and then turns to the next batch of cameras, Ca ...
-
Avermedia NV 1000 - page 108
AVerMedia NV1000/3000/5000/7000 Use r’s Manual The system will display all cameras as the above picture. ...
-
Avermedia NV 1000 - page 109
Chapter 4 Using the System 110 4.1.2 Full Screen Display On the Monitor Screen , you can click to switch to a full screen display . Y ou will see the system turning to a full-size display . T o m onitor a specific channel, move the cursor to the desired channel and click the left button to switch the desired channel to full screen. Click again to r ...
-
Avermedia NV 1000 - page 110
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 4.1.4 Alarm St atus and Reset When the alarm is triggered, you c an see the red sparkling arrow on the Monitor Screen. Click the arrow to see the alarm status dialog. Reset: reset the triggered alarm status and canc el alarm actions. Al l previous alarms will be halted. Save: save the alarm status as ...
-
Avermedia NV 1000 - page 111
Chapter 4 Using the System 112 Click to select a date. Y ou will see in the lower t able. The blue block means the channel has recording dat a during the period of time. Move the cursor to desired blue blocks and select t hem. The selected blocks will turn red. Click to play the selected videos. ...
-
Avermedia NV 1000 - page 112
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 4.2.2 Playing the Videos Click to play the file. The selected button will then tur n in red. Y ou can use the playback control panel buttons to control the play mode. The functions of each button are below . Begin: Move to the beginning of the video recordi ng. Previous: Go back to the previous frame ...
-
Avermedia NV 1000 - page 113
Chapter 4 Using the System 114 The blue bars indicate that there are recorded videos during the ti me periods. If there are no video files recorded during your appointed time, you can not click the time button. Click the desired time button to play back the videos that were recorded during the appointed hour . The blue bar of the selected button wi ...
-
Avermedia NV 1000 - page 114
AVerMedia NV1000/3000/5000/7000 Use r’s Manual Under 1-Cam display , you can catc h a desired file by setting segments. Select a video playback date and time and click to play back the recorded v ideo. Drag the slider to the desired position and then click to mark the beginning of a segment. Y ou will see a pink triangle on the slider. Drag the s ...
-
Avermedia NV 1000 - page 115
Chapter 4 Using the System 116 Save to output the video file. The system will name the output segment according to the recording time. Y ou can save the video segment to hard dis ks, USB Flash disk or other network devices. 4.2.3.2 Sa ve St atic Images Sometimes it is necessary to catch st atic images from the recorded videos. The DVR system allows ...
-
Avermedia NV 1000 - page 116
AVerMedia NV1000/3000/5000/7000 Use r’s Manual Begin: Move to the beginning of the video file. Previous: Go back to the previous frame. Slower: Play the video recording at the speed of 1/2x, 1/4x, or 1/8x Play: Play the video file. Stop: S top to pl ay the video file. Faster: Play the video recording at the speed of 2x, 4 x, or 8x. Next: Go to th ...
-
Avermedia NV 1000 - page 117
Chapter 4 Using the System 118 Save: Click the button to save the playback screen as a BMP or JPG file. Print: Print the current image. Video Slider : Move the bar left/right to fast search a desired event. Playing Time/Speed: This indicator shows the playing time and speed. Play File: This indicator shows the directory of the backup video file. 4. ...
-
Avermedia NV 1000 - page 118
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 4.4.1 Intelligent Se arch Click and it turns green when this function is enabled. Adjust the sensitivity first, higher number acco mpanies with higher sensitivity . Move the cursor to the desired channel and click the mouse and drag to mark an area. A red frame appears on the displa y . The screen of ...
-
Avermedia NV 1000 - page 119
Chapter 4 Using the System 120 Select an event and double click. The system will show the video of the event. 4.4.2 Event Search Click to use Event Search. An Event Search Setting dialog appears. Select sensor e vents , motion events , video loss events , and POS event s according your demands. The screen of the assigned channel appears “Event Se ...
-
Avermedia NV 1000 - page 120
AVerMedia NV1000/3000/5000/7000 Use r’s Manual If you want to find a searching list, tick Output Event Li st box, and the Searching Duration items will be enabled. Select the Begin/End Time and enter Search Interval . Click OK to start searching. After setting the event search, the system will appear a following event list. This list shows all ev ...
-
Avermedia NV 1000 - page 121
Chapter 4 Using the System 122 every 10 seconds and search by second. Click to initiate “Visual Search” . The following dialog will appear . Select a camera and assign a date. The system keeps the videos that are 25 days earlier than the appointed date. Click OK you will see the following images. In “ Visual search by day ” mode, the serial ...
-
Avermedia NV 1000 - page 122
AVerMedia NV1000/3000/5000/7000 Use r’s Manual Move the cursor to a desired date and click it. It turns to the “ Searching by hour ” mode. There are up to 24 screens on the display . The system presented the 1 st video image in each hour . As you see the following picture, the system recorded the videos from 9:00 to 14:00. Each picture shows ...
-
Avermedia NV 1000 - page 123
Chapter 4 Using the System 124 As you see the above picture, the system recorded the videos from 12:00 to 13:00. There are 20 screens on the display at most. Each picture shows its recording time on its upper lef t corner . If th ere is no data, you will see “ No Dat a ” on the displa y . Y ou can click to return to the Video search by hour or ...
-
Avermedia NV 1000 - page 124
AVerMedia NV1000/3000/5000/7000 Use r’s Manual As you see the above picture, the static images are recorded every 10 seconds. The system recorded the videos from 12:00 AM to 12:02 AM. When you search video by every 10 seconds, the system will record a frame every 10 seconds. There are 20 pictures on this screen at most. Each picture shows its rec ...
-
Avermedia NV 1000 - page 125
Chapter 4 Using the System 126 As you see the above picture, the static images are recorded by second. The system recorded the videos from 12:00:00 to 12:00:09. When you search video by second, the system will record a frame every second. There are 10 pictures on this screen at most. Each picture shows its recording time on its upper lef t corner . ...
-
Avermedia NV 1000 - page 126
AVerMedia NV1000/3000/5000/7000 Use r’s Manual Select EVENT and the desired Date . Double click the desire event in the t able. The system will show the video of the assigned event if there is recorded files. 4.5 Using E-Map E-Map provides a completely configured map where all cameras, sensors, and relays are set. Click to set up the E-map. ...
-
Avermedia NV 1000 - page 127
Chapter 4 Using the System 128 1. Select a button from to set up your E-map. When you click button, the left-top corner will appear “Area 1 ” in blue. Click to load an E-map. The system supports up to 8 E-maps. The map must have been saved in JPG or BMP format and file size is smaller than 200KB. 2. Click to arrange Cameras , Sensors , and Rela ...
-
Avermedia NV 1000 - page 128
AVerMedia NV1000/3000/5000/7000 Use r’s Manual Please set up the following items before using PTZ cameras. 1. Select Camera T ick Use PTZ box to enable the function. Select a camera in the dro p-down list. 2. Connection Settings A. Select a Com Port where the PTZ camera connector is connected. B. Select a Camera ID from the drop-down list. C. Ass ...
-
Avermedia NV 1000 - page 129
Chapter 4 Using the System 130 D. Determine a Preset Name for the position. E. Click Save to keep the setting. After you finish the above steps, repeat the same procedure to setup another PTZ camera until you finish all PTZ cameras. Click to finish the setting or to cancel it. After the settings, you can start to use the PTZ controller . 9 4 5 6 8 ...
-
Avermedia NV 1000 - page 130
AVerMedia NV1000/3000/5000/7000 Use r’s Manual direction of PTZ camera lens. 6. Aut o pa n . After you setup Preset position numbers and the auto pan path group, click to monitor positions in sequence. 7. Auto pan p ath group . Af ter setting up Preset position numbers from the server , you can enable the auto pan path group function according to ...
-
Avermedia NV 1000 - page 131
Chapter 4 Using the System 132 4.7.1 Checking Event Logs Select Event and a desired date, the lower table will show all event logs. Y ou will see the event time, camera, type and event in the table. T o check event logs of another day , just select the desired date and then click to update the logs. 4.7.2 Checking Operation Lo gs Select Operation a ...
-
Avermedia NV 1000 - page 132
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 4.7.3 Checking POS Logs Select POS and a desired date, the lower table will show all POS logs. Y ou will see the time, type and event logs. The sy stem will keep all POS logs. T o check the logs of another day , just select the desired date and then click to update the logs. 4.6.4 Checking System Log ...
-
Avermedia NV 1000 - page 133
Chapter 4 Using the System 134 such as Network on/off and remote login. Y ou will see the time, type and event logs. T o check the logs of another day , just select the desired date and then click to update the logs. ...
-
Avermedia NV 1000 - page 134
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 4.8 Using POS After you connect the POS and the DVR system, click to enter POS Console Setting screen. Click to add a POS item. Y ou will see the following dialog. Please configure the following items. POS name: Enter the POS name. Use COM: Select a COM port from the drop-down list. T he COM port num ...
-
Avermedia NV 1000 - page 135
Chapter 4 Using the System 136 POS information will show on the appointed channels. After you finish the settings, click OK . Y ou will return to POS console setting dialog. Click to add a POS setting and repeat the above procedure. T o modify the setting, please se lect the desired item and then click to adjust the settings. If you wish to delete ...
-
Avermedia NV 1000 - page 136
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 4.10 Using Functiona l Keys The DVR system allows users to use functional keys to fast operate the application under Display mode. The following table shows functional descriptions of each function key . Function Keys Function description F1 System Information F2 Recording F3 Network F4 System Settin ...
-
Avermedia NV 1000 - page 137
Chapter 4 Using the System 138 4.11 Checking System Information Click F1 to see the system information. The system information includes status of CPU, RAM, VGA Memory , DirectX V ersion, Login ID , Production Version and Active Internet client connection. Click OK to exit system information dialog box. ...
-
Avermedia NV 1000 - page 138
...
-
Avermedia NV 1000 - page 139
Chapter 5 Using Remote Program 140 Chapter 5 Using Remote Program Make sure that remote access service is enabled as 4.8 Using Network Server mentioned before you open IE. Enter the server ’s IP address or domain name which is mentioned in 3.2.4 Network Setting to re mote access the surveillance system from anywhere. Y ou will find the following ...
-
Avermedia NV 1000 - page 140
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 5.1 Using WebCam After connecting to the surveillance server from the remote PC, enter the user I D and password to finish the authentication. Please refer to 3.2.10 User Setting to set up new users. After the authentication, you will see the below screen. If the client PC supports DirectDraw, please ...
-
Avermedia NV 1000 - page 141
Chapter 5 Using Remote Program 142 Here is a simple illustration of WebCam. 12 13 15 9 4 5 6 8 10 11 1 2 7 3 14 16 [1] 10:19:30 [2] 10:19:30 [3] 10:19:30 [4] 10:19:30 [12] 10:19:30 [7] 10:19:30 [8] 10:19:30 [11] 1 0:19:30 [15] 10:19:30 [16] 10:19:30 [14] 10:19:30 [6] 10:19:30 [10] 10:19:30 [9] 10:19:30 [5] 10:19:30 [13] 10:19:30 1. Monitor Screens: ...
-
Avermedia NV 1000 - page 142
AVerMedia NV1000/3000/5000/7000 Use r’s Manual Before using DirectDraw After using DirectDraw Click again to cancel the function. 3. Received file size: This shows the total size of the video files. 4. Camera frames: This shows the total frame rates of the channels. 5. Split display mode . The system provides 4 split display modes: 1- Cam split d ...
-
Avermedia NV 1000 - page 143
Chapter 5 Using Remote Program 144 T o connect a different server , click to add new camera settings. Enter the new server IP address, Port, User Name and Password. Click OK to save the settings. Y ou can conn ect up to 16 different servers. Y ou will see the cameras of the added server in the table. Click display mode to rotate cameras that surpas ...
-
Avermedia NV 1000 - page 144
AVerMedia NV1000/3000/5000/7000 Use r’s Manual T o save your time, you can keep the current settin g as an encrypted text file by clicking the “ Export ” button. The system will request for a storage path and a file name. Select a file name and proper path to keep this current setting. When you open IE, just import the setting. Thus, you don? ...
-
Avermedia NV 1000 - page 145
Chapter 5 Using Remote Program 146 A B C D E F G A. Select a PTZ camera. Click to select a PTZ camera. Y ou can click / to enable / disable the appoint ed PTZ channel on the Select column. Click OK to save. Note: Only PTZ cameras which are set from the server side will appear in this table. B. Focus in / Focus out . Click / to adjust the focus to p ...
-
Avermedia NV 1000 - page 146
AVerMedia NV1000/3000/5000/7000 Use r’s Manual PTZ camera lens from the server . 16 Preset position numbers are the maximum for a PTZ camera. Click the Preset position numbers to make the lens move to the desired positions. F. Auto pan p ath group . After setting up Preset position numbers from the server , you can enable the auto pan path group ...
-
Avermedia NV 1000 - page 147
Chapter 5 Using Remote Program 148 This function enables you to setup the cameras settings and recording settings on the server side. Please refer to 3.2.2 and 3.2.3 . 14. Remote E-Map . Click to initiate the E-Map. Y ou will see an E- Map screen. ...
-
Avermedia NV 1000 - page 148
AVerMedia NV1000/3000/5000/7000 Use r’s Manual When you click the camera icon to the desired E-map, the right windows will show images from the appointed camera if the enable camera is connected to your digital surveillance sy stem. 15. Remote Console. Click to initiate Remote console. The s ystem will request an authorization. Enteri ng User ID, ...
-
Avermedia NV 1000 - page 149
Chapter 5 Using Remote Program 150 16. Event Log Viewer . Click to see the event log viewer . Y ou will see the below dialog. Please refer to 4.5 Using Event Log Viewer for more details. ...
-
Avermedia NV 1000 - page 150
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 5.2 Using the Remote Console Remote console can be regarded as a re stricted DVR. It can record and play video data of remote server . Please enter the server site when you open the bro wser . Enter the u ser ID and password to finish the authentication. After you login the system through a browser , ...
-
Avermedia NV 1000 - page 151
Chapter 5 Using Remote Program 152 5.2.2 Using Di splay fr om Rem ote Cons ole The functions of buttons on t he remote console are below. 1. Exit Click this item to exit the DVR system. 2. Split Screen Display DVR provide s 6 split display modes for your se lection. Y ou can select 1 /4 /9/ 16 split displa y mo de by simpl y clicking the icon. 1-Ca ...
-
Avermedia NV 1000 - page 152
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 4. Recording Click to record the video recording that you can monitor through your Remote console. Remote console hel ps you to backup the video recording that you monitor . Y ou can only record the channels that are shown on the Remote Console screen. 5. E-Map Click E-Map button to load your desired ...
-
Avermedia NV 1000 - page 153
Chapter 5 Using Remote Program 154 When you are running Remote consol e, the default screen will be Monitor Screen. Y ou will see the button in green. When you switch to Playback screen, the button turns gray . 9. Playback Click to switch to Playback Screen under Remote Console. In Remote Console application, you can select to play remote video dat ...
-
Avermedia NV 1000 - page 154
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 5.2.3 Using Playback from Remot e Console User can choose to play local video files or remote video files. Select a desire d item and then click OK to continue the playback task. Y ou will see a playback screen as below . Here is the introduction of each button in Playback screen. ...
-
Avermedia NV 1000 - page 155
Chapter 5 Using Remote Program 156 1. Audio V olume Adjustment Click the icon to ad just the audio volume to a proper volume. You can mote the channels by selecting the Mute box. 2. Slider Drag the slide r to go fo rward or back ward throug h the video of a selected video rec ording. 3. Tim e B utt o n A blue bar on top of a time button i ndicates ...
-
Avermedia NV 1000 - page 156
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 4. Split Screen Display There are 6 s plit displa y modes to ch oose from: 1 - C a m d i s p l a y 4-Cam split display 9-Cam split display 16-Cam spli t displa y Select a split display mod e to view the channel. You can play the audio and vi deo at the sa me time onl y under 1 -Cam Display mode. When ...
-
Avermedia NV 1000 - page 157
Chapter 5 Using Remote Program 158 Play: Play the recording file. Faster: Pla y the video recording at the speed of 2x, 4x, or 8x. Next: Go to the next frame. End: Go to the end of the video recording. 7. Date Click this button t o choose the d ate of the recorded files that you want to play back. 8. Camera ID Click the desired ca meras from which ...
-
Avermedia NV 1000 - page 158
AVerMedia NV1000/3000/5000/7000 Use r’s Manual A. Connect your PDA to your PC. Click Install PDA Viewer . B. The s ystem will automatically inst all the PDA Viewer application. C. Click Next to continue. D. Click Ye s to continue the installation. ...
-
Avermedia NV 1000 - page 159
Chapter 5 Using Remote Program 160 E. The system automatically installs the application. F. The system appears an ‘Install A V erMedia PDA Viewer using the default application directory? ’ dialog box. Click Y es to use a default directory . G. The system continues to install the application. H. After finishing the installation, the system will ...
-
Avermedia NV 1000 - page 160
AVerMedia NV1000/3000/5000/7000 Use r’s Manual Click the hyperlink, Download PDA-Viewer , to see the download screen. Click Y es to download PDA-viewer . The system will autom atically inst all PDA-Viewer after the download is completed. After the inst allation, you will see an icon on the PDA desktop. Make sure your PDA connect to Internet befor ...
-
Avermedia NV 1000 - page 161
Chapter 5 Using Remote Program 162 Follow the steps to connect to the DVR server . 1. Click on your PDA desktop. 2. Enter the server IP , Port, ID and password. Select a network type and click OK . The screen will show “ Connecting to Ser ver ”. After y ou access the server , you can see the following screen. ...
-
Avermedia NV 1000 - page 162
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 1 2 3 4 5 6 7 1. Connecting DVR ser ver ︰ Click this button to set the server IP , port, ID and password. 2. Display mode ︰ Click to view an image from a single camera. Y our PDA will show all camera screens in turn. T o switch to 4-Cam display mode, click . Y ou will the following screen. When t ...
-
Avermedia NV 1000 - page 163
Chapter 5 Using Remote Program 164 be disabled. 4. Snap shot : Click to save the desired image. The system will save the image as a bmp file. Click Save to keep the images. 5. Focus in / Focus out : When a PTZ camera is enabled, you can click / to adjust the focus to produce a clearer image during surveillance. If there is no PTZ camera connected t ...
-
Avermedia NV 1000 - page 164
AVerMedia NV1000/3000/5000/7000 Use r’s Manual Y ou will see above screen. Select a proper video quality according to your demand. ...
-
Avermedia NV 1000 - page 165
Append ix A Registeri ng Domain Names 166 Appendix A Registering Domain Names DDNS (Dynamic Domain Name Service) is a data query service mainly used on the Internet for translating domain names into In ternet addresses. It allows remote clients to intelligently search dynamic servers wi thout any previous enquiring for servers’ Internet addresses ...
-
Avermedia NV 1000 - page 166
AVerMedia NV1000/3000/5000/7000 Use r’s Manual 3. User Information Please provide the following user information, Host Name , Pass word , E-mail , Company , and Country to complete the registration process. Note that Host Name a nd Domain Name ( A V erMedia.avers.com.tw ) are the replacement for In ternet address w hile a remote client tends to s ...
-
Avermedia NV 1000 - page 167
Appendix B I mage Verifica tion 168 Appendix B Image Verification 1 ImageVerify is a watermark-checking program to identify the validity of a saved image (e.g. by snapshot). a. Run the setup/s tart program Click Start->Program files->NV->Image Veri fication to execute t he program. b. Load the image file to start verifying file This progra ...
-
Avermedia NV 1000 - page 168
AVerMedia NV1000/3000/5000/7000 Use r’s Manual B. ImageV erify returns a result. (1) If the file is not modified, the same picture appears in the righ t side result picture box. (2) If the file is modified, a warning dialog appears. In the result box, the area that is being changed is highlighted. ...
-
Avermedia NV 1000 - page 169
Appendix B I mage Verifica tion 170 ...
Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Avermedia NV 1000, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Avermedia NV 1000. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Avermedia NV 1000.
Manuels d’utilsiation similaires
Manuel d’utilisation complet de l’appareil Avermedia NV 1000, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Avermedia NV 1000 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Avermedia NV 1000.
Le manuel d’utilisation complet Avermedia, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.
1. Introduction et des conseils sur la façon d'utiliser le manuel Avermedia NV 1000 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Avermedia NV 1000, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lAvermedia NV 1000 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Avermedia NV 1000 - qui devraient nous aider dans les premières étapes lors de l'utilisation Avermedia NV 1000
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Avermedia NV 1000
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Avermedia NV 1000 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.
Avez-vous une question à propos de Avermedia NV 1000?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Avermedia NV 1000, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Avermedia NV 1000 il est probable qu’il a envie de partager la façon de le résoudre.