Français dropdown-ico

Manuel d’utilisation Emerson 1051

36 pages 0.47 mb
Télécharger

Aller à la page of 36

Summary
  • Emerson 1051 - page 1

    www.Fisher.com D100320X012 T y p e s 10 5 1 an d 10 5 2 Si z e s 40 , 60 an d 70 Styles H a nd J Rotary Actuators Contents Introduction 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Scope of Manual 3 . . . . . . . . . . . . . . . . . . . . . . . . . Description 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specific ...

  • Emerson 1051 - page 2

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 2 Table 1. Type 1051 and 1052 Actuator Specifications Operation Direct Acting: Increasing loading pressure extends the diaphragm rod out of the spring barrel Service: Type 1051: For on-off or throttling service with positioner Type 1052: For on-off or throttling service with or wi ...

  • Emerson 1051 - page 3

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 3 Table 3. Acceptable Shaft Diameters and Torque Limits for Actuators With J Mounting ACTUATOR SIZE COUPLING AVAILABILITY BY KEYED SHAFT DIAMETER TORQUE LIMIT FOR J MOUNTING ACTUATOR SIZE mm Inches N D m Inch-Pounds 40 9.5 12.7 15.9 19.1 25.4 3/8 1/2 5/8 3/4 1 52 69 114 207 468 46 ...

  • Emerson 1051 - page 4

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 4 Specifications Specifications are shown in table 1 for Type 1051 and 1052 actuators. Specifications for a given Type 1051 or 1052 actuator as it originally comes from the factory are stamped on a nameplate attached to the actuator. Principle of Operation The diaphragm rod moves ...

  • Emerson 1051 - page 5

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 5 and approximate weights in table 7. This information is required for proper fabrication of the user-provided bracket and coupling. 1. For an actuator with an H mounting adaptation, attach an appropriate mounting bracket (not provided) to the mounting plate (key 22) with the cap ...

  • Emerson 1051 - page 6

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 6 Table 4. Style H or J Mounting Dimensions ACTUATOR SIZE C E F H P Y ACTUATOR SIZE C Type 1051 Type 1052 F H P Y mm 40 333 505 607 54 114 175 73 60 473 749 876 64 121 186 76 70 (1) 536 – – – 849 64 121 186 76 Inch 40 13.12 19.88 23.88 2.12 4.50 6.88 2.88 60 18.62 29.50 34.5 ...

  • Emerson 1051 - page 7

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 7 Figure 5. Type 1052 Mounting Dimensions (refer to table 4) C0676-3 / IL NOTE: SEE P ARTS LIST FOR WOODRUFF KEY NUMBERS 1 19A1467-E / 1 1/4-INCH NPT C (DIA) E H Y F P TYPE 1052 WOODRUFF KEY TYPE 1052 STYLE J ADAPT A TION 9.5 THRU 38.1 mm (3/8 THRU 1Ć1/2ĆINCH) OUTPUT SHAFTS 19A1 ...

  • Emerson 1051 - page 8

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 8 Table 5. Style H Mounting Dimensions ACTUATO R SIZE 1051 ACTUATO R SIZE 1052 S ACTUATOR OUTPUT SHAFT DIAMETER V L K (1) T U W 1051 1052 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch 40 40 22.2 7/8 26.2 1.03 19.1 0.75 15.75 15.62 0.620 0.615 57.2 2.25 28.4 1.12 5/16-18 UNC 4 0& ...

  • Emerson 1051 - page 9

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 9 Table 6. Style J Mounting Dimensions ACTUATOR SIZE 1051 & 1052 VALVE SHAFT DIAMETER COUPLING (1) INNER DIAMETER V L (2) K T U W 1052 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch 9.5 3/8 9.53 9.58 0.375 0.377 137 5.38 39.6 1.56 15.7 0.62 117 4.62 - - - - - ...

  • Emerson 1051 - page 10

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 10 Table 7. Approximate Actuator Weights SIZE TYPE 1051 TYPE 1052 TOP-MOUNTED HANDWHEEL SIZE Kg Lb Kg Lb Kg Lb 40 60 70 43 89 ––– 94 197 ––– 45 92 123 99 203 272 7.3 11 21.3 16 24 47 Table 8. Keyway Alignment Information (1) DESIRED DESIRED ACTUATOR COUPLING VALVE SHAF ...

  • Emerson 1051 - page 11

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 11 Center of Gravity Dimensions ACTUATOR ACTUATOR X Y ACTUATOR TYPE ACTUATOR SIZE mm Inch mm Inch 1051 40 15 0.6 191 7.5 1051 60 10 0.4 361 14.2 40 15 0.6 241 9.5 1052 60 10 0.4 432 17.0 1052 70 23 0.9 488 19.2 Figure 9. Center of Gravity Dimensions Loading Connection 1. Connect t ...

  • Emerson 1051 - page 12

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 12 Table 9. Wrench Sizes Required for Turnbuckle Adjustment, Inches ACTUATOR TURN- BUCKLE LOWER LOCKNUT UPPER LOCKNUT Type Size BUCKLE (KEY 57) LOCKNUT (KEY 16) LOCKNUT (KEY 58) 1051 & 1052 40 60 1-1/8 1-5/16 3/4 15/16 1-1/8 1-5/16 1052 70 1-5/16 1-1/8 1-5/16 3. Make sure the ...

  • Emerson 1051 - page 13

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 13 Table 10. Recommended Bolting Torques (1) KEY ACTUATOR SIZE KEY NUMBER 40 60 70 NUMBER N D m lbf D ft N D m lbf D ft N D m lbf D ft 6 27 20 27 20 27 20 7 & 8 41 30 41 30 102 75 9 34 25 102 75 102 75 16 34 25 61 45 102 75 18 81 60 163 120 271 200 21 23 17 68 50 68 50 23 34 2 ...

  • Emerson 1051 - page 14

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 14 Disassembly The following procedure describes how the actuator can be completely disassembled. When inspection or repairs are required, perform only those steps necessary to accomplish the procedure. Do not under ordinary circumstances remove the cap screws (keys 7, 8, and 21). ...

  • Emerson 1051 - page 15

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 15 attached output shaft (key 87) from the actuator housing (key 20). f. If necessary, remove the retaining ring (key 88) and slide the mounting bracket or mounting plate off the output shaft. 8. Check the bearing (key 67) in the mounting bracket or mounting plate (key 22). Press ...

  • Emerson 1051 - page 16

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 16 (key 13 and 73) are to be replaced, unscrew the lower bearing seat from the adjustor, and then remove the thrust bearing and the bearing races (keys 71 and 72) from the lower bearing seat. D For actuator designs with a set screw (key 75), remove the actuator spring (key 11) fro ...

  • Emerson 1051 - page 17

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 17 to the lower threads of the adjustor, do not overlap the coat of lubricant with the coat of thread-locking compound since this will adversely affect the performance quality of both substances. D For actuator designs with a set screw (key 75), if the adjustor (key 74) and attach ...

  • Emerson 1051 - page 18

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 18 DESIRED ACTION OF HOUSING CONSTRUCTION Actuator Operated Equipment CONSTRUCTION TO SPECIFY Push Down to Open (1) Clockwise to Close (3) Style A to Open (1) (PDTO) Counterclockwise to Close (3) Style B Push Down to Close (2) Clockwise to Close (3) Style B to Close (2) (PDTC) Cou ...

  • Emerson 1051 - page 19

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 19 3. Loosen the cap screw (key 28). CAUTION If necessary, use a wheel puller to remove the lever (key 27) from the output shaft (key 87). It is permissible to tap the wheel puller screw lightly to loosen the lever, but hitting the screw with excessive force could damage the opera ...

  • Emerson 1051 - page 20

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 20 2. Mark the orientation of the lever (key 27) with respect to the output shaft (key 87). This marking is used during reassembly to allow for proper lever/output shaft positioning. When the lever and output shaft are properly marked, heat the hex nut (key 19) to 177 _ C (350 _ F ...

  • Emerson 1051 - page 21

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 21 Figure 11. Travel Stop Orientation 10. Follow the instructions in the Turnbuckle Adjustment section. Top-Mounted Handwheels and Adjustable Travel Stops Handwheel and Travel Stop Operation Note If repeated or daily manual operation is expected or desired, the unit should be equi ...

  • Emerson 1051 - page 22

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 22 Handwheel and Travel Stop Maintenance W ARNING Avoid personal injury or property damage from sudden release of process pressure or uncontrolled movement of parts. Before performing any maintenance operations: D Always wear protective gloves, clothing, and eyewear when performin ...

  • Emerson 1051 - page 23

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 23 assemblies, the cotter pen and slotted nut (keys 247 and 54, figure 15) will have to be removed so that the handwheel (key 51, figure 15) and locknut can be taken off the stem first. e. Remove and inspect the O-rings (keys 138 and 139, figures 15 and 16); replace them if necess ...

  • Emerson 1051 - page 24

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 24 Parts List Retrofit Kits Kit provides parts to add a top-mounted handwheel. Kit number 1 includes the handwheel assembly only. Kit number 2 includes Kit number 1 and a new upper case (key 1) that is required to mount the handwheel assembly. Key Description Part Number Type 1052 ...

  • Emerson 1051 - page 25

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 25 Figure 12. T ype 1051 Actuator with T ypical H and J Mounting Adaptations D0299-1/IL Key Description Part Number 6 Nut, hex Size 40 (16 req’d) Size 60 (24 req’d) Size 70 (28 req’d) 7 Screw, cap, Hex hd Size 40 (4 req’d) Size 60 (6 req’d) Size 70 (10 req’d) 8 Travel ...

  • Emerson 1051 - page 26

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 26 Figure 12. T ype 1051 Actuator with T ypical H and J Mounting Adaptations (continued) 59A2408-B D0299-2 ...

  • Emerson 1051 - page 27

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 27 Figure 13. T ype 1052 Actuator with T ypical H and J Mounting Adaptations 59A2420-A D0300–1/IL ...

  • Emerson 1051 - page 28

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 28 Figure 13. T ype 1052 Actuator with T ypical H and J Mounting Adaptations (continued) 59A2420-A/DOC 55A6970-J/DOC 59A2416-A/DOC Key Description Part Number 27 Lever 28 Screw cap, Hex Hd 29 Hub 30 Retaining Ring, Ext 31* Bushing (2 req’d) Size 40 12A9373X012 Sizes 60 & 70 ...

  • Emerson 1051 - page 29

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 29 Figure 13. T ype 1052 Actuator with T ypical H and J Mounting Adaptations (Continued) 59A2420-A/DOC 55A6970-J/DOC 59A2416-A/DOC Key Description Part Number 39 Plate, Cover w/o Type 3610J/3620J Positioner 40 Screw, Cap, Hex hd w/o Type 3610J/3620J Positioner (4 req’d) 41 Namep ...

  • Emerson 1051 - page 30

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 30 Figure 14. H Mounting for 44.5 or 50.8 mm (1-3/4 or 2-Inch) Keyed Equipment Shafts 39A2401-A A3245-1/IL Key Description Part Number 78 Cap Screw, Hex Hd Style H Size 40 w/22.2 mm (7/8-inch) actuator output shaft (4 req’d) w/28.6 mm (1-1/8 inch) actuator output shaft (4 req’ ...

  • Emerson 1051 - page 31

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 31 Figure 15. T op-Mounted Handwheel Assemblies 38A1213-B/DOC CV8010-E/DOC Key Description Part Number 89* Pin, Groove, Steel Alloy (continued) Style J Size 60 w/38.1 mm (1-1/2 inch) Actuator Output Shaft G1232332992 Sizes 60 & 70 w/50.4 mm (2-inch) actuator output shaft for 4 ...

  • Emerson 1051 - page 32

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 32 Key Description Part Number 139* O-Ring, Nitrile Size 40 1D267306992 Size 60 1D547106992 Size 70 1D269106992 140* Groove Pin Size 40 1F118028992 Size 60 1B627035072 141 Cap Screw, Hex Hd, Steel Size 40 (6 req’d) Size 60 (8 req’d) Size 70 (12 req’d) 142 Body 164 Body Exten ...

  • Emerson 1051 - page 33

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 33 Key 11 Spring (1) , steel (for Type 1052 actuator only) CASING ACTUATOR INITIAL SPRING COMPRESSION KEY 11 CASING PRESSURE ACTUATOR SIZE Push-Down-to-Open Push-Down-to-Close KEY 11 SPRING PART Bar Psig SIZE Bar Psig Bar Psig SPRING PART NUMBER 30 0.2 0.2 0.3 2.7 3.1 4.3 0.2 0.2 ...

  • Emerson 1051 - page 34

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 34 Key 11 Spring (1) , steel (for Type 1051 actuator only) Key 13 Spring Seat (1) , steel (for Type 1051 actuator only) CASING PRESSURE ACTUATOR SIZE KEY 11 KEY 13 Bar Psig ACTUATOR SIZE KEY 11 SPRING PART NUMBER KEY 13 SPRING SEAT PART NUMBER 30 1K509827032 1F361627032 12A9445X01 ...

  • Emerson 1051 - page 35

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 35 Figure 16. Adjustable Up T ravel Stops 28A1207-B/DOC 28A1214-A/DOC CV8057-D/DOC ADJUST ABLE UP TRA VEL STOP FOR SIZE 30 AND 40 ACTUA TORS ADJUST ABLE UP TRA VEL STOP FOR SIZE 60 ACTUA TORS ADJUST ABLE UP TRA VEL STOP FOR SIZE 70 TYPE 1052 ACTUA TORS ...

  • Emerson 1051 - page 36

    1051 & 1052 H & J Instruction Manual Form 5587 November 2006 36 Figure 17. Adjustable Down T ravel Stop NOTE: FOR SIZE 60 ACTUA TORS, A SECOND HEX NUT (KEY 54) IS USED IN THE PLACE OF THE HEX NUT (KEY 63) 38B5654-B A7238 / IL Emerson Process Management Marshalltown, Iowa 50158 USA Cernay 68700 France Sao Paulo 05424 Brazil Singapore 128461 ...

Fabricant Emerson Catégorie Automobile Parts

Les documents que nous recevons du fabricant de l'appareilEmerson 1051 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Emerson
- manuels d’utilisations 1051
- fiches produit Emerson
- dépliants
- ou étiquettes-énergie Emerson 1051
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Emerson 1051.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Emerson 1051, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Emerson 1051. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Emerson 1051.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Emerson 1051, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Emerson 1051 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Emerson 1051.

Le manuel d’utilisation complet Emerson, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Emerson 1051 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Emerson 1051, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lEmerson 1051 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Emerson 1051 - qui devraient nous aider dans les premières étapes lors de l'utilisation Emerson 1051
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Emerson 1051
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Emerson 1051 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Emerson 1051?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Emerson 1051, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Emerson 1051 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)