-
Atech Tech PEGASUS-02 M - page 1
Operating and Safety Instructions 1 PEGASUS-02 P / SKAT-02 P PEGASUS-02 M / SKAT-02 M MITER SAWS OPERATING AND SAFETY INSTRUCTIONS ...
-
Atech Tech PEGASUS-02 M - page 2
Operating and Safety Instructions 2 CONTENTS Page 1. General Information 3 1.1. Introduction 3 1.2. Manufacturer 3 2. Machine’s description and pur pose of use 3 2.1. Machine’s description 3 2.2. Technical features 5 2.3. Cutting diagra m 6 2.4. Overall di m ensions 7 2.5. Part lists and technica l drawings 8 3. Safety 10 3.1. Safety informatio ...
-
Atech Tech PEGASUS-02 M - page 3
Operating and Safety Instructions 3 1. GENERAL INFORMATION 1.1. INTRODUCTION The user’s manual gi ven by the m anufactur er contains necessary information about the machine parts. Each m ach ine operat or should read these instructions carefully, and the machine should be operated aft er fully understanding the m . Safe and efficient use of the m ...
-
Atech Tech PEGASUS-02 M - page 4
Operating and Safety Instructions 4 Please mention the below mentioned data in all your correspondenc e regarding the machine with the m anufact urer and/or your ATECH dealer. *Machine model *Machine’s serial nu mber *Voltage and frequenc y *Name of dealer wh e re m achine was purch ased *Date of purchase *Description of the machine fault *Averag ...
-
Atech Tech PEGASUS-02 M - page 5
Operating and Safety Instructions 5 2.2. TECHNICAL FEATURES Technical Features (American) SKAT-02 P 3 HP 220V/440V 60Hz d=1 " D=16" 3000 rpm - - -- 26x24x30" 154 lbs SKAT-02 M 3 HP 220V/440V 60Hz d=1 " D=16" 3000 rpm 90-120 psi 0.2 CFM 30x24x53" 253 lbs Technical Features (Metric) SKAT-02 P 2,2 kW 400V 50Hz D=400mm d=3 ...
-
Atech Tech PEGASUS-02 M - page 6
Operating and Safety Instructions 6 2.3. CUTTIN G DIAGRAM SKAT Cutting Diagram PEGASUS Cutting Diagram ...
-
Atech Tech PEGASUS-02 M - page 7
Operating and Safety Instructions 7 2.4. OVER ALL DIMENS IONS PEGASUS-02 M / SKAT-02 M PEGASUS- 02 P / SK AT-02 P ...
-
Atech Tech PEGASUS-02 M - page 8
Operating and Safety Instructions 8 2.5. PAR TS LIST AN D TECHNICAL DRA WINGS PEGASUS No. ORDER No. P ART NAME QTY 20 142-0 26 F ORK SHAFT 1 21 193-0 09 25x30x15 SI NTER BUSHE 2 22 177-0 23 F ORK ADJUSTMENT PIN 2 24 112-0 20 MOTOR S HAFT PULLEY 1 26 180-0 01 M6 x10 S CREW 1 28 112-0 17 BEARIN G COVER 2 30 141-1 12 BLADE SHAF T 1 31 112-0 19 BLADE S ...
-
Atech Tech PEGASUS-02 M - page 9
Operating and Safety Instructions 9 SKAT No. Order No. PART NAME QTY 20 142-026 FORK SHAF T 1 21 193-009 2 5x30x15 SINTER BUSHE 2 22 177-023 FORK ADJUSTMENT PIN 2 24 112-104 MOT OR SHAF T PULLEY 1 26 180-001 M6 x10 SCREW 1 28 112-017 B EARING COVER 2 30 141-112 B LADE SHAFT 1 31 112-105 B LADE SHAFT PULLEY 1 37 112-028 SHAFT SUPPORT PLATE 1 38 143- ...
-
Atech Tech PEGASUS-02 M - page 10
Operating and Safety Instructions 10 3. SAFETY 3.1. SAFETY I NFORMATION The symbols shown hereunder are necessary to be read with special at tention. Not reading or observing of th em may cause da mage t o the equipment or pe rsonal injury. The IMPORTANT symbol above is one telling to a pply spe cial care and to be careful at carrying out the speci ...
-
Atech Tech PEGASUS-02 M - page 11
Operating and Safety Instructions 11 3.2.4. Machine should be o perated only by staff mem b ers, who have read and understood the contents of th is manual. 3.2.5. All di rectives, recomme ndations a nd general safety rules contained in t his m anua l have to be observed fully. The m achine cannot be operated in any way for purposes other than t hos ...
-
Atech Tech PEGASUS-02 M - page 12
Operating and Safety Instructions 12 3.3.9. Don’t use any materials other than those reco mmended by the manufacturer for cutting operations on the machine. 3.3. 10. Ensure that the work piece is cla mped appropriately by the m ach ine's clamp or vice. 3.3. 11. Ensure safe wor king position, always keep your ba lance. 3.3. 12. Keep your mach ...
-
Atech Tech PEGASUS-02 M - page 13
Operating and Safety Instructions 13 5. INSTALL ATION OF THE MACHINE The m achine s hould be lo cated at least 40 cm i n front of the back wall . The machine is equipped with a burr coll ection bag connector and power supply s ocket on the back side. 5.1. PREPARA TION 5.1.1. The outer dimensions o f t he machine are stipulated in the Dimensions pag ...
-
Atech Tech PEGASUS-02 M - page 14
Operating and Safety Instructions 14 5.2. ELECTRI C CONNECTI ON 5.2.1. The three-phase power cable soc ket has to be in acc ordance with t he socket on the machine. 5.2.2. Use a connection cable socket in accordance with th e CE Saf ety Directives. 5.2.3. Check the inlet power sup pl y befor e powering the machine. See Page 19 Item 3.8.3. * The so ...
-
Atech Tech PEGASUS-02 M - page 15
Operating and Safety Instructions 15 The electric socket connectio ns have t o be checked and corrected by a qualif ied electrician. The rotation d irection o f the saw blade shoul d not be defi ned before testing. 6. MACHINE SAFETY I NFORMATION 6.8.1. It is not allowed to operate the ma chine w ith the protective cover and other protective equipme ...
-
Atech Tech PEGASUS-02 M - page 16
Operating and Safety Instructions 16 7. OPERATI ON The miter saws PEGASUS / SKAT cut non-ferrous aluminum, PVC profiles and PVC m aterials. The operator adjusts (manually via knob) the cutting speed of the saw blade according to the m at erial ty pe to be cut. I nner and o uter s harp ed ges o f the carbide tipped circular saw blade ensures high qu ...
-
Atech Tech PEGASUS-02 M - page 17
Operating and Safety Instructions 17 Illustration 3 7.1.1. Place the material t o be cut on the machine table, take the measur e the cutting length using the measuring tape on th e back fence, and cla mp the work piec e (pneumatically or manua lly). 7.1.2. Start to operate the saw blade by pressing the Start button. 7.1.4. Carry out the cutt ing op ...
-
Atech Tech PEGASUS-02 M - page 18
Operating and Safety Instructions 18 7.2. MITER CUT: 7.2.1 . Press the saw blade down unt il it touches the cutting slot of the tab le . 7.2.2 . Pull out the snap pin fr om its slot. (See Illustration 4) 7.2.3. Pull the table locking Bar to th e left to unlock. (See Illustration 4) 7.2.3. Adjust the desired angle by turn ing the cutting head to the ...
-
Atech Tech PEGASUS-02 M - page 19
Operating and Safety Instructions 19 Figure-4 Always ens ure that the clamps are pos itioned outside of the operation area of t he saw blade. 8. SAFE IN STALLATION OF THE SAW B LADE 8.1 To remove the circu lar saw blade from the b lade s haft, follow the instructions below. 8.1.1. Remove the M8 sc rew (Figure 4, No. 55) by turning it counter c lock ...
-
Atech Tech PEGASUS-02 M - page 20
Operating and Safety Instructions 20 8.1.8. Wh en replacing t he saw blade, use the part of the saw blade was her No. 48, which is in accordanc e with the s aw blade shaft diameter. The outer di ameter o f the blade w asher is 30 and 32 mm. . 9. MAINTENAN CE 9.1. PERIODIC CHECKS 9.1.1. Ensure that the tab le and all kind of parts are clean an d dr ...
-
Atech Tech PEGASUS-02 M - page 21
Operating and Safety Instructions 21 9.2. MAINT ENANCE AT THE END O F THE WORKING DAY 9.2.1. Disconnect electric and pneu matic connections. ( Main Switch must be on “0” position) 9.2.2. Remove all burr, chip and foreign materials from the machine surfac es. If it is necessary to clean the inside of the blade guard, re mo ve the fr ont cover, u ...
-
Atech Tech PEGASUS-02 M - page 22
Operating and Safety Instructions 22 11. ELECTRIC / PNEUMA TIC COMPONEN TS 11.1 ELECTRI C COMP ONENTS 11.2 PNEUMA TIC COMP ONENTS ORDER No. PART NAME QUANTITY 241-009 FRC-1/8-D-MINI CONDITIONER 1 241-023 SV- 1/4-3/ 2-D-O VALVE 1 550-003 PNEUMATIC CL AMP 2 ORDER No. PART NAME QUANTI TY 163-002 MOTOR QS 90 L 2A H 2.2 kW 4 00V 3 N PE 50 Hz 1 161-005 L ...
Avez-vous une question à propos de Atech Tech PEGASUS-02 M?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Atech Tech PEGASUS-02 M, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Atech Tech PEGASUS-02 M il est probable qu’il a envie de partager la façon de le résoudre.