-
NEC MultiSync JC-1941UMA - page 1
MultiSync ® E 900 ™ User’s Manual MultiSync ® E 900 ™ User’s Manual NEC Enter prise Ser ies Contents 1 Quick Start 2-3 Controls 4-5 Recommended Use 6-7 Specifications 8 Features 9 Troubleshooting 10 References 11 Limited Warranty 12 Untitled-1 6/15/98, 1:24 PM 1 ...
-
NEC MultiSync JC-1941UMA - page 2
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARN ...
-
NEC MultiSync JC-1941UMA - page 3
Your new NEC Technologies MultiSync ® E Series monitor box* should contain the following: • MultiSync E 900 ™ (JC-1941UMA) Monitor with tilt/swivel base • Power Cord • Captive Signal Cable • User’s Manual • Registration Card Contents Power Cord User’ s Manual Registration Card MultiSync ® E 900 User’s Manual MultiSync ® E 900 U ...
-
NEC MultiSync JC-1941UMA - page 4
Quick Star t Figure A.1 2 15-pin mini D-SUB Captive Signal Cable To attach the MultiSync ® E 900 ™ monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. If necessary, install the display card into your system. For more information, refer to the display card manual. 3. For the PC: Connect the 15-pin mini D- ...
-
NEC MultiSync JC-1941UMA - page 5
Power Cord Power Outlet Figure D.1 RESET PROCEED EXIT CONTROL MultiSync E 900 Figure C.1 Figure B.1 Quick Star t 3 Computer Mac Adapter (Not included) Captive Signal Cable 15-pin mini D-SUB Untitled-1 6/15/98, 1:24 PM 5 ...
-
NEC MultiSync JC-1941UMA - page 6
4 OSM ™ (On-Screen Manager) control buttons on the front of the monitor function as follows: EXIT Exits the OSM controls. CONTROL § / © Moves the highlighted area left/right to select one of the controls. CONTROL +/– Moves the bar in the + or – direction to increase or decrease the adjustment. PROCEED Enters OSM menu and selects icons at th ...
-
NEC MultiSync JC-1941UMA - page 7
Tools 1 Reduces horizontal moire patterns. Reduces vertical moire patterns. Tools 2 Degauss Control: Eliminates the buildup of stray magnetic fields that alter the correct scan of the electron beams and affect the purity of the screen colors, focus and convergence. When activated, your screen image will jump and waver a bit as the screen is demagne ...
-
NEC MultiSync JC-1941UMA - page 8
Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC ® E 900 ™ COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified se ...
-
NEC MultiSync JC-1941UMA - page 9
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: Recommended Use • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your ...
-
NEC MultiSync JC-1941UMA - page 10
Specifications 8 Monitor MultiSync ® E 900 ™ Notes Specifications Monitor Picture Tube Diagonal: 19 inch 90 ° deflection, 0.28 mm trio dot pitch, Viewable Image Size: 18.0 inch medium short persistence phosphor, Radius: 1330 mm multi-layered, anti-static screen coating, semi-tint screen, Invar Shadow Mask and OptiClear ® screen surface. Input ...
-
NEC MultiSync JC-1941UMA - page 11
9 Features OptiClear ® Screen Surface: Reduces reflection and glare and increases contrast without sacrificing focus level, clarity or brightness. Along with the flat square technology CRT, a high contrast screen with 0.28 mm trio dot pitch delivers crisp, clean text and graphics. Invar Shadow Mask: Holes in the thin metal sheet behind the glass o ...
-
NEC MultiSync JC-1941UMA - page 12
10 T roubleshooting No picture • Display card should be completely seated in its slot. • Power Button and computer power switch should be in the ON position. • Signal cable should be completely connected to display card/computer. • Check connector for bent or pushed-in pins. Image is scrolling or unstable • Signal cable should be complete ...
-
NEC MultiSync JC-1941UMA - page 13
References • BBS (978) 635-4706 NEC Technologies’ Remote Bulletin Board System is an electronic service accessible with your system and a modem. Communication parameters are: 300/1200/2400/9600/14.4k/28.8k bps, no parity, 8-data bits, 1 stop bit • Customer Service/ Technical Support (800) 632-4662 Fax (978) 635-4298 • Electronic Channels: I ...
-
NEC MultiSync JC-1941UMA - page 14
NEC Technologies, Inc. (hereinafter “NECTECH”), warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace any part of the enclosed unit which proves defective for a period of three (3) years from the date of first consumer purchase. Spare parts are warra ...
-
NEC MultiSync JC-1941UMA - page 15
t Notes t 13 Untitled-1 6/15/98, 1:25 PM 15 ...
-
NEC MultiSync JC-1941UMA - page 16
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Technologies and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use an ...
Avez-vous une question à propos de NEC MultiSync JC-1941UMA?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec NEC MultiSync JC-1941UMA, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec NEC MultiSync JC-1941UMA il est probable qu’il a envie de partager la façon de le résoudre.