Français dropdown-ico

Manuel d’utilisation Toshiba PBDP-110

38 pages 0.83 mb
Télécharger

Aller à la page of 38

Summary
  • Toshiba PBDP-110 - page 1

    October 2001 ICC #10407-V1.00- 000 A DJUSTA BLE SPEED DRIVE NETWORK INTERFA CE PBDP-110 PROFIBUS-DP COMMUNICA TIONS INTERFA CE FOR THE TOSHIBA 7-SERIES A ND 9-SERIES A DJUSTA BLE SPEED DRIVES ...

  • Toshiba PBDP-110 - page 2

    1 Introduction Thank you for purchasing the ICC PBDP- 110 Prof ibus-DP Communicat ions Interf ace for the Toshiba 7-Ser ies and 9-Series Adjust able Speed Drives. Befor e using the PBDP-110 interf ace, please fam iliarize yourself with the unit and be sure to thoroug hly read the instructions and pr ecautions contained in this manual. In addition, ...

  • Toshiba PBDP-110 - page 3

    2 PBDP-110 Profibus-DP Interface User's Manual Part Number 10407-V1.00-000 Printed in U. S.A. ©2001-2002 Industr ial Control Communicat ions, Inc. All ri g hts reserv ed Industrial Cont rol Communicat ions, Inc. reser ves the right t o make chang es and improv ements to its prod ucts withou t providi ng notice. Notice to Users INDUSTRI AL CON ...

  • Toshiba PBDP-110 - page 4

    3 Usage Precautions • Please use the PBDP-110 only when the ambient tem perature of the environment int o which the PBDP-110 is installed is within the following specified t emperatur e limits: Operation : -10 ∼ +50 ° C (+14 ∼ +122 ° F) Storag e : -40 ∼ +85 ° C (-40 ∼ +185 ° F) • Avoid installation locations that may be subject ed t ...

  • Toshiba PBDP-110 - page 5

    4 TABLE OF CONTENTS 1. Mechanical Diagrams ........................................................................... 5 1.1 Encl osure .........................................................................................................5 1.2 Mo unting Cli p ....................................................................................... ...

  • Toshiba PBDP-110 - page 6

    5 1. Mec hanical Dia gr ams 1.1 Enclosure (All units ar e in inches) ...

  • Toshiba PBDP-110 - page 7

    6 1.2 Mounting Clip (All units ar e in inches) ...

  • Toshiba PBDP-110 - page 8

    7 1.3 External Interface Note that f or clarity t he above diagram show s the PBDP-110 unit r emoved from its case. Howe ver, it is not nece ssary to remove the uni t from its case in order to install or configur e the PBDP-110. Data_Exchange LED SHIELD gr ounding ter minal (refer to Secti on 4). Prof ibus network connector Driv e “A” connector ...

  • Toshiba PBDP-110 - page 9

    8 2. F ea tur e Summary The PBDP-110 int erface pr ovides a wi de array of net work data access and drive control f eatures. Combined with the flexible conf igurat ion and high-speed dat a transf er capabilities of the Pr ofibus net work, this allows powerful net worked control and monitoring systems to be designed. Some of the main f eatures provi ...

  • Toshiba PBDP-110 - page 10

    9 Global Cont rol Functions • Freeze mode : Input (mon itor) data v alues are h eld constan t withi n the P BDP- 110 until the next “f reeze” comm and or an “unf reeze” command is received. Used prim arily for synchronized monitor ing of multiple Prof ibus nodes. • Sync mode : Output (con trol) data v alues are h eld constan t wi thin t ...

  • Toshiba PBDP-110 - page 11

    10 In addition to t he above signals, the m etallic housing of the DB9 connect or is connected to the shield sect ion of t he interf ace board. T he shield section is attached to the met al ground t erminal on the bot tom of the unit, where a ground wire can be attached to connect the Prof ibus network cable shield to ground. Ref er t o section 4 o ...

  • Toshiba PBDP-110 - page 12

    11 panel, securing it in place. Lastly, the unit can be snapped ont o the f ixed mounting clip. In all cases, the unit ca n be ea sily unsnapped f rom the mounti ng clip to tempora rily provide easier access to the conf igurat ion switches or connectors. ...

  • Toshiba PBDP-110 - page 13

    12 3. Installing The Interf ace The PBDP-110 connect s to each drive via the drive’s common serial (log ic level) communication por t, typically located on either t he main drive contro l board (G7) , on the f ront of the drive enclosure under a sm all snap-on cover (A7, S9), or on the rig ht- hand side of t he drive enclosure under a small snap- ...

  • Toshiba PBDP-110 - page 14

    13 CNU2A (on the EOI ), then t his connection must f irst be switched over to CNU1 (on the drive contr ol board) and CNU1A (on t he EOI). Refer to To shiba’s documentation f or any precautions or not ices regarding this connection change. If the EOI is alr eady connected via the RS485/RS232 channel, then no chang e is required . 6. Connect the dr ...

  • Toshiba PBDP-110 - page 15

    14 pow er to the drive has been removed. A hazard exists temporari ly for electrical shock even if t he source pow er has been removed. Verify that the CHARGE LED has gone out befor e continuing t he installation process. 3. Attach the mount ing clip and unit enclosure in your desir ed manner (r efer to page 10 for more i nf ormatio n). 4. Remove t ...

  • Toshiba PBDP-110 - page 16

    15 4. Gr ounding Grounding is of par ticular impor tance f or reliable, st able operation. Com munication system characteristics may vary from system to system, depending on t he system environment and gr ounding met hod used. The PBDP- 110 Prof ibus interf ace is provided with a “Shield GND” ter minal on the bott om of the unit. The “Shield ...

  • Toshiba PBDP-110 - page 17

    16 6. Maintenance And Inspection Prev entive mainte nance and i nspection is required to maintain the communicati on interf ace in its optim al condition, and t o ensure a long oper ational lif etime. Depending on usage and oper ating condit ions, perf orm a periodic inspect ion once eve ry three to si x mon ths. Before sta rting inspecti ons, al w ...

  • Toshiba PBDP-110 - page 18

    17 7. Stor ag e And W arr anty 7.1 Storage Observe the f ollowing points when the communication inter face is not used immediately af ter purc hase or when it is not used f or an extended period of time. • Avoid storing the unit in places that are hot or humid, or that cont ain large quantit ies of dust or metallic dust . Stor e the unit in a wel ...

  • Toshiba PBDP-110 - page 19

    18 8. Selecting the Pr of ibus Netw or k Addr ess The 8-posit ion piano-style “Address” DIP switches accessible f rom the f ront of t he unit allow selection of the Prof ibus slave address. Switch positions #1 ∼ #7 select the address. Switch position #8 is reserved f or production test use, and should always be kept in t he “OFF” posit io ...

  • Toshiba PBDP-110 - page 20

    19 (continued…) SW1 SW2 SW3 SW4 SW5 SW6 SW7 Addr SW1 SW2 SW3 SW4 SW5 SW6 SW7 Add r OFF OFF OFF OFF OFF OFF ON 64 OFF O FF OFF OFF OFF ON ON 96 ON OFF OFF OFF OFF OFF ON 65 ON OFF OFF OFF OFF ON O N 97 OFF ON OFF OFF OFF OFF ON 66 OFF ON OFF OFF OFF ON O N 98 ON ON OFF OFF OFF OFF ON 67 ON ON OFF OFF OFF ON ON 99 OFF OFF ON OFF OFF OFF ON 68 O FF ...

  • Toshiba PBDP-110 - page 21

    20 9. Ex c hanged Da ta Str uctur es 9.1 Output (Control) Data Format The size of t he output data st ructure f rom t he network mast er to the PBDP-110 depends on the module selected f rom the GSD f ile f or the network config uration tool. Module #1, intended for applications where only 1 drive is connected to the PBDP- 110 (via Channel A), is co ...

  • Toshiba PBDP-110 - page 22

    21 Command Word Bit-mapped dr ive control command word (dr ive parameter num ber FA00). T his is the location where run/stop, etc. commands are writt en. An example command word can be found in T able 1. Because the f ormat of t his command word depends on the drive manuf acturer’s specif ications, please r efer to your specific dr ive’s Serial ...

  • Toshiba PBDP-110 - page 23

    22 Frequency Command Drive parameter num ber FA01. T he data contained in the f req uency command word is the desired f requency comm and multiplied by 100, and then convert ed to hexadecimal. In other words, if a f req uency command of 55.34Hz is desired, then 55.34 x 100 = 5534, which converted to hexadecimal is 0x159E. The fr equency command hig ...

  • Toshiba PBDP-110 - page 24

    23 9.2 Input (Status) Data Format The size of t he input data str ucture f rom the PBDP- 110 to the network master depends on the module selected f rom the GSD f ile f or the network config uration tool. Module #1, intended for applications where only 1 drive is connected to the PBDP- 110 (via Channel A), is comprised of 24 bytes struct ured as six ...

  • Toshiba PBDP-110 - page 25

    24 Locations mark ed “Reserved” in the above table are reser ved for f uture use. Prese ntly , all “Res erve d” input data is set to 0 by the PBDP -110. Future firmw are releases, however, may use these locations for data transf er. The f ormat of all infor mation tr ansf erred f or Dr ive B is identical to that for Drive A. Theref ore, all ...

  • Toshiba PBDP-110 - page 26

    25 Output Frequency Drive parameter num ber FD00. Cont inuously reports the dr ive’s operating f req uency. In order to determine the driv e’s actual output frequency , the data con tained in th e output f requency word off sets m ust f irst be converted f rom hexadecimal t o decimal, and then divided by 100. For example, if t he output f reque ...

  • Toshiba PBDP-110 - page 27

    26 9.3 Diagnostics W hen one of t he connected drives fault s, 1 byte of high-prior ity user diagnostics is suppl ied to the Pro f ibus maste r. The format of the diagnosti cs byte is sh own here : Bit #: 7 6 5 4 3 2 1 0 Reserved Reserved Reserved Drive B Faulted Reserved Reserved Reserved Drive A Faulted Drive B Diagnostics Drive A Diagnostics Res ...

  • Toshiba PBDP-110 - page 28

    27 10. P ar ameter R egister Access 10.1 Parameter Number / Action Output Words To access drive paramet ers, 2 output words and 2 action bits are provided in each drive’s output data str ucture. T he structur e of t hese output words and action bits is as fo llows: Actio n bits Bit #: 15 14 13 12 11 8 7 4 3 0 Reserved Reserved Req1 Req0 Action bi ...

  • Toshiba PBDP-110 - page 29

    28 10.2 Parameter Number / Action Input Words The response by the PBDP-110 t o paramet er read and write req uests is placed in 2 inpu t words and 2 inp ut bits of the inp ut data stru cture. The structure of thes e data items is as fo llows: Response bits Bit #: 15 14 13 12 11 8 7 4 3 0 Reserved Reserved Resp1 Resp0 Action re sponse bi ts (off set ...

  • Toshiba PBDP-110 - page 30

    29 10.3 Parameter Access Procedure In order t o read f rom a param eter or write t o a parameter , 2 control bit s are provided for each drive’s data structur e. These bit s, labeled Req1 and Req 0 in the Act ion Bits wo rd, can ha ve the follo wing va lues: Req1 Req0 Meanin g 0 0 ........... No action (idle state) 0 1 ........... Parame ter read ...

  • Toshiba PBDP-110 - page 31

    30 • If the req uest was a write, and t he write was perfor med succes sfully, t his will be indicated to the m aster by Resp1:Resp0 changing fr om 0:0 to 1: 0. The parameter number response will equal the accessed par ameter num ber, and the data written t o the drive will be reflect ed in the data / error code r esponse wor d. • If an error o ...

  • Toshiba PBDP-110 - page 32

    31 11. P ar ameter R egister s The paramet ers that can be accessed via the paramet er register access method outlined in section 10 are def ined by the drive manuf acturer. For a listing of the available parameters, t heir adjustm ent rang es and notable access behavior, ref er to the appropriat e “Parameter Refer ence” section of the drive’ ...

  • Toshiba PBDP-110 - page 33

    32 12. MMI P o r t Use / GSD Files The PBDP-110 Pr ofibus In terf ace is equipped with an on-board RS232 Man-Machine Interface (M MI) port. Th is port all ows the u nit to communica te to a standard personal computer via its serial (CO M) port. This can be accom plished by using the 2-met er DB9-to-RJ45 MMI port cable provided with your interface k ...

  • Toshiba PBDP-110 - page 34

    33 13. Notes ...

  • Toshiba PBDP-110 - page 35

    34 ...

  • Toshiba PBDP-110 - page 36

    35 ...

  • Toshiba PBDP-110 - page 37

    36 ...

  • Toshiba PBDP-110 - page 38

    2202 Timber loch Plac e, Suit e 210 The Woodland s, TX USA 77380-1163 Tel: [281] 367-3007 Fax: [ 281] 367- 2177 W orl d Wide Web h ttp: //www.i ccdesig ns.com Pr int ed i n U. S. A ...

Fabricant Toshiba Catégorie Network Card

Les documents que nous recevons du fabricant de l'appareilToshiba PBDP-110 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Toshiba
- manuels d’utilisations PBDP-110
- fiches produit Toshiba
- dépliants
- ou étiquettes-énergie Toshiba PBDP-110
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Toshiba PBDP-110.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Toshiba PBDP-110, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Toshiba PBDP-110. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Toshiba PBDP-110.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Toshiba PBDP-110, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Toshiba PBDP-110 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Toshiba PBDP-110.

Le manuel d’utilisation complet Toshiba, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Toshiba PBDP-110 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Toshiba PBDP-110, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lToshiba PBDP-110 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Toshiba PBDP-110 - qui devraient nous aider dans les premières étapes lors de l'utilisation Toshiba PBDP-110
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Toshiba PBDP-110
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Toshiba PBDP-110 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Toshiba PBDP-110?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Toshiba PBDP-110, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Toshiba PBDP-110 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)