Français dropdown-ico

Manuel d’utilisation Cisco Systems ONS 15327

50 pages 0.61 mb
Télécharger

Aller à la page of 50

Summary
  • Cisco Systems ONS 15327 - page 1

    CHAPTER Cisco ONS 15327 User Documentation 3-1 3 Using Cisco T r anspor t Controller This chapter explains ho w to connect workstations to the Cisco ONS 15327 and use the Cisco T ransport Controller (CTC) software to operate the ONS 15327. This includes understanding the CTC vie ws; setting up basic ONS 15327 information, such as security , timing, ...

  • Cisco Systems ONS 15327 - page 2

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-2 3.2 Installing CTC This section explains ho w to install CTC on PCs and Solaris workstations. 3.2.1 Preparing PCs to Run CTC The following minimum requirements are needed to run CTC from personal computers: • Pentium or equi valent processor • 128 me ...

  • Cisco Systems ONS 15327 - page 3

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-3 Step 3 In the W indows folder , double-click Ja vaPolicyInstall.exe . A message displays on the DOS screen stating the installation was successful. Step 4 Install the JRE 1.3.0 plug-in: (a) From the W indows Start menu, choose Settings > Control Panel ...

  • Cisco Systems ONS 15327 - page 4

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-4 Step 2 Extract the files from the CD/Solaris/files.tar archiv e (if not extracted in a previous procedure) to a temporary directory on your hard driv e by typing: cd /tmp/ctctmp/Solaris/Netscape tar -vxf communicator-v476-us.sparc-sun-solaris2.5.1.tar ...

  • Cisco Systems ONS 15327 - page 5

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-5 Step 4 Un-compress each patch file by typing: su - root cd /tmp/ctctmp/Solaris/Jre1.3.0_01 tar -xvf j2sdk1_3_0-patches_solsparc-5.6.tar# or ...5.7 or 5.8.tar cd 5.6 or 5.7 or 5.8 uncompress *.z Step 5 For each un-compressed tar file, untar the archi ve ...

  • Cisco Systems ONS 15327 - page 6

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-6 Step 10 If the Jav a plug-in is not in the default location on your workstation, set the en vironment variable NPX_PLUGIN_P A TH to the location of the plug-in for each user and include /opt/j2re1_3_0_01/plugin/sparc/ns4 as its first element (and the on ...

  • Cisco Systems ONS 15327 - page 7

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-7 Note The per-user .ja va.policy has a leading period (.) while the system-wide file does not. Step 2 Use Netscape to launch and run CTC. (Before launching Netscape, make sure to put /opt/j2re1_3_0_01/bin in your path.) Step 3 Clean up the temporary fil ...

  • Cisco Systems ONS 15327 - page 8

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-8 If you hav e W indows 95 or 98, do the follo wing (sho wn in Figure 3-1): (a) Click the Configuration tab. (b) Select TCP/IP Ethernet 10/100 Adapter . (c) Click Properties . Figure 3-1 The Network dialog bo xes for Windows 95/98 and Windo ws NT Step 4 C ...

  • Cisco Systems ONS 15327 - page 9

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-9 Step 5 Click Specify an IP address . Step 6 In the IP Address field, enter an IP address that is on the same subnet but not identical to the ONS 15327 (in the example the ne w IP address is 192.1.0.5). The last three digits must be between 1 and 254. St ...

  • Cisco Systems ONS 15327 - page 10

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-10 If your PC is not connected, a “Request timed out” message displays. If this occurs, check that the cables connecting the PC to the ONS 15327 are securely attached. Check the Link Status LED on the PC NIC. Repeat Steps 1 – 13, verifying IP and sub ...

  • Cisco Systems ONS 15327 - page 11

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-11 • Select Manual proxy configuration to add e xceptions to the proxy server , then click V iew . On the Manual Proxy Configuration dialog box under Exceptions, enter the IP addresses of ONS 15327 nodes that you will access. Separate each address with ...

  • Cisco Systems ONS 15327 - page 12

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-12 Procedure: Log into the CTC Step 1 From the PC connected to the ONS 15327, start Netscape or W indows Explorer . Step 2 In the Netscape or Internet Explorer W eb address (URL) field, type the ONS 15327 IP address. For initial setup, this is the default ...

  • Cisco Systems ONS 15327 - page 13

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-13 Status information for the current view is sho wn in the upper left hand corner of the node. In node view , the node name; IP address; node boot date and time; a summary of critical (CR), major (MJ), and minor (MN) alarms; the name of the user who is lo ...

  • Cisco Systems ONS 15327 - page 14

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-14 Node view pro vides seven tabs to access node information and perform node maintenance and provisioning tasks. Some tabs ha ve subtabs. T able 3-2 defines the node vie w tabs and lists their subtabs. T able 3-2 Node View T abs and Subtabs T ab Descript ...

  • Cisco Systems ONS 15327 - page 15

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-15 3.5.2 Network View Network vie w (Figure 3-7) displays information about the ONS network. Y ou perform network provisioning and management tasks in this vie w . A United States map displays and the ONS 15327 nodes are represented by colored icons. The c ...

  • Cisco Systems ONS 15327 - page 16

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-16 3.5.2.1 Inser ting an Alter nativ e Network T opology Map W ith CTC you can install a custom map for the network view . The map needs to be in either a JPEG or GIF file format and stored on an accessible local or network dri ve. Approximate longitudes ...

  • Cisco Systems ONS 15327 - page 17

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-17 Figure 3-8 Specifying a customized network map with the Preferences dialog bo x Step 2 Choose the General tab and uncheck Use Default Map . Step 3 Click Bro wse . Navigate to the location of the stored map graphic file. Step 4 Select the desired file. ...

  • Cisco Systems ONS 15327 - page 18

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-18 Figure 3-9 Example of a customized map graphic Step 6 At the network vie w , fill the windo w with the desired map graphic: (a) Click the Zoom Selected Area tool in the toolbar . The cursor arro w becomes a crosshair . (b) Holding do wn the left button ...

  • Cisco Systems ONS 15327 - page 19

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-19 Step 4 Drag nodes onto the cloud icon to place nodes in the domain. Y ou can place an unlimited number of nodes in a domain. Step 5 Right-click the domain cloud to display the following menu choices: • Drill Down to Domain —Opens the domain to displ ...

  • Cisco Systems ONS 15327 - page 20

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-20 3.5.4 CTC Na vigation Y ou can use different methods to na vigate to views within the CTC windo w . The toolbar and the menu bar at the top of the screen contain a series of tools/menus that can be used for navigating and other operations. Access the to ...

  • Cisco Systems ONS 15327 - page 21

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-21 Figure 3-11 CTC popup showing car d-status information 3.5.5 T ab le Data W ithin the three views, much of the ONS 15327 CTC data, such as alarms, alarm history , circuits, and node in ventory , displays in tables. Y ou can change the way the CTC tables ...

  • Cisco Systems ONS 15327 - page 22

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-22 Figure 3-12 Displaying the tab le column shortcut menu by right-c licking a column header T able 3-7 lists the options that you can use to customize the information that displays in CTC tables. 3.5.6 In v entor y Data The In ventory tab (Figure 3-13) di ...

  • Cisco Systems ONS 15327 - page 23

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-23 Change Notices (PCNs) and Field Service Bulletins (FSBs). Using the ONS 15327 export feature, you can export in ventory data from ONS 15327 nodes into spreadsheet and database programs, where you can consolidate information for network in ventory manage ...

  • Cisco Systems ONS 15327 - page 24

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-24 3.6 Viewing ONS 15327 Alarms, Conditions, and Events T o display current and cleared alarms generated on the node, conditions, and e vents, open the node view and select the Alarms tab (Figure 3-21). The Alarms tabs in network view and card vie w show n ...

  • Cisco Systems ONS 15327 - page 25

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-25 Figure 3-14 The Alarms tab showing tw o standing alarms and two c leared alarms Alarms are displayed in one of fiv e background colors, listed in T able 3-9, to communicate the alarm se verity quickly . 3.6.1 Controlling Alar m Displa y Y ou can contro ...

  • Cisco Systems ONS 15327 - page 26

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-26 3.6.2 Vie wing Alar m Histor y The History tab displays historical alarm data. The History tab also shows the e vents (that is, non-reported acti vities) that occur in addition to the alarms. For e xample, protection switching ev ents or performance mon ...

  • Cisco Systems ONS 15327 - page 27

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-27 Figure 3-16 Retrieving alarms 3.7 Setting Up General Node Inf ormation The first ONS 15327 provisioning task to perform is setting up basic node information. If the node will be connected to a LAN or other ONS nodes, the information that you enter for ...

  • Cisco Systems ONS 15327 - page 28

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-28 CTC uses the latitude and longitude to place node icons on the network-vie w map. T o con vert longitudes and latitudes giv en in decimal degrees to de grees, minutes, and seconds, see the “Con vert Coordinates to Degrees, Minutes, and Seconds” sect ...

  • Cisco Systems ONS 15327 - page 29

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-29 Step 7 Con vert the longitude, originally giv en in decimal degrees, to the Wdddmmssf ff format. In the example, 122.615536 = W1223655000. Enter zeros if de grees are less than 100, for example, 98 de grees is entered 098. 3.8 Setting Up General Netw or ...

  • Cisco Systems ONS 15327 - page 30

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-30 • Static Routes— Static routes permit multiple CTC sessions with different destination IP addresses to coexist on the same subnet. If the ONS 15327 or the computer used to access the ONS 15327 is linked to a network router , create a static route. F ...

  • Cisco Systems ONS 15327 - page 31

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-31 3.9 Setting Up ONS 15327 Security The ONS 15327 has four security lev els that limit the functions you can perform: Retrieve, Maintenance, Provisioning, and Superuser . A Retrie ve user can retrie ve and view CTC information but cannot set or modify par ...

  • Cisco Systems ONS 15327 - page 32

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-32 Note For users to gain access to multiple nodes, the same user name and password must e xist on each node. Security lev els also limit the amount of time you can leave the system idle before the CTC windo w is locked to pre vent unauthorized users from ...

  • Cisco Systems ONS 15327 - page 33

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-33 Note When creating new users from the node vie w , you must add CTC users to each node where they need access. Users are not automatically added to other network nodes. When creating ne w users from the network vie w , the user will be created on all no ...

  • Cisco Systems ONS 15327 - page 34

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-34 3.10 Setting Up Pr otection Gr oups The ONS 15327 provides se veral card protection methods. When you set up protection for ONS 15327 cards, you must choose between maximum protection and maximum card-slot av ailability . The highest protection reduces ...

  • Cisco Systems ONS 15327 - page 35

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-35 • Rever sion time —if Revertive is checked, enter the amount of time follo wing a corrected failure condition that the ONS 15327 should switch back to the working port. Step 7 Click OK. Note The default XTCPR O TGRP provides XTC-le vel protection fo ...

  • Cisco Systems ONS 15327 - page 36

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-36 Procedure: Delete Protection Groups Step 1 Display the CTC node view . Step 2 V erify that working traffic is not running on the protect card: (a) Click the Maintenance > Protection tabs. (b) Under Protection Groups, choose the group you want to del ...

  • Cisco Systems ONS 15327 - page 37

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-37 Figure 3-21 An ONS 15327 timing example with e xternal, BITS, and internal timing Synchronization Status Messaging (SSM) is a SONET protocol that communicates information about the quality of the timing source. SSM messages are carried on the S1 byte of ...

  • Cisco Systems ONS 15327 - page 38

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-38 Procedure: Set Up ONS 15327 Timing Step 1 Display the CTC node view . Step 2 Click the Provisioning > Timing tabs (Figure 3-22). Step 3 Enter the follo wing information: • T iming Mode— Set to External if timing is deriv ed from an external BITS ...

  • Cisco Systems ONS 15327 - page 39

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-39 • Coding— Set to the coding used by your BITS reference, either B8ZS or AMI. • F raming— Set to the framing used by your BITS reference, either ESF (Extended Super Frame, or SF (D4)(Super Frame). SSM is not av ailable with Super Frame. • Sync ...

  • Cisco Systems ONS 15327 - page 40

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-40 Figure 3-22 Setting timing parameters Step 4 Click Apply . 3.12 Setting Up External User -Pr o visionable Alarms Y ou can use CTC to provision up to six external input alarms and two e xternal output controls for the ONS 15327. The XTC card houses the c ...

  • Cisco Systems ONS 15327 - page 41

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-41 Figure 3-23 Example of external alarms and contr ols in a virtual wire configuration 3.12.2 Exter nal Input Alar ms Us e external alarms for sensors such as open doors, temperature sensors, flood sensors, and other en vironmental conditions. Procedure ...

  • Cisco Systems ONS 15327 - page 42

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-42 • Severity— Select a se verity . The sev erity determines how the alarm displays in the CTC Alarms and History tabs and whether the LEDs activ ate. Critical, Major , and Minor activ ate the appropriate LEDs. Not Alarmed and Not Reported do not activ ...

  • Cisco Systems ONS 15327 - page 43

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-43 3.12.3 Exter nal Output Controls Use external controls, or of fice alarms, to drive visual or audible de vices such as bells and lights. The alarm-triggering conditions for the external controls can be the user -defined external input alarms (virtual ...

  • Cisco Systems ONS 15327 - page 44

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-44 Figure 3-26 Example of the external alarm input and output pr ocess 3.13 Creating Alarm Pr ofiles The Alarm Profiles feature allows you to pro vision alarm severities by creating unique alarm profiles for individual ONS 15327 nodes. A profile you cr ...

  • Cisco Systems ONS 15327 - page 45

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-45 Figure 3-27 The Alarming tab showing the default pr ofile and a new pr ofile Alarm Profiles are created at the network vie w using the Provisioning > Alarming tabs (Figure 3-27). A default alarm profile (in the Default column) is pre-pro visioned ...

  • Cisco Systems ONS 15327 - page 46

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-46 Alarm sev erity is changed/assigned using a menu. T o vie w this menu, right-click the alarm you want to change in its alarm profile column. Sev en alarm severity le vels appear: • CR: Critical alarm • MJ: Major alarm • MN: Minor alarm • NR: No ...

  • Cisco Systems ONS 15327 - page 47

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-47 (b) From the menu, select the desired sev erity . (c) Repeat Steps a and b for each alarm that needs to be changed. (d) After you hav e assigned the properties to your ne w alarm profile, click the Store tab . (e) In the Store Profile(s) dialog box, s ...

  • Cisco Systems ONS 15327 - page 48

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-48 Note The Port Overrides column at the node vie w reads true when additional profiles are av ailable and false when only the inherited profile is a v ailable. Tip If you choose the wrong profile, click Reset to return to the previous profile. 3.14 Pr ...

  • Cisco Systems ONS 15327 - page 49

    78-11719-02 July 2001 Using Cisco Transport Controller 3 Cisco ONS 15327 User Documentation 3-49 Procedure: Print CTC Data Use the following procedure to print CTC screens and data. Before you start, mak e sure your PC is connected to a printer . Step 1 From the File menu on the menu bar , click Print . Step 2 In the Print dialog box (Figure 3-28), ...

  • Cisco Systems ONS 15327 - page 50

    3 Using Cisco Transport Controller 78-11719-02 July 2001 Cisco ONS 15327 User Documentation 3-50 • As TSV —Sav es the CTC table v alues as text, separated by tabs. Y ou can import TSV data into spreadsheets and database management programs. Figure 3-29 Exporting CTC data as HTML Step 3 Click OK . Step 4 In the Sav e dialog box, enter a file na ...

Fabricant Cisco Systems Catégorie Network Card

Les documents que nous recevons du fabricant de l'appareilCisco Systems ONS 15327 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Cisco Systems
- manuels d’utilisations ONS 15327
- fiches produit Cisco Systems
- dépliants
- ou étiquettes-énergie Cisco Systems ONS 15327
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Cisco Systems ONS 15327.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Cisco Systems ONS 15327, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Cisco Systems ONS 15327. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Cisco Systems ONS 15327.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Cisco Systems ONS 15327, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Cisco Systems ONS 15327 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Cisco Systems ONS 15327.

Le manuel d’utilisation complet Cisco Systems, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Cisco Systems ONS 15327 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Cisco Systems ONS 15327, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lCisco Systems ONS 15327 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Cisco Systems ONS 15327 - qui devraient nous aider dans les premières étapes lors de l'utilisation Cisco Systems ONS 15327
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Cisco Systems ONS 15327
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Cisco Systems ONS 15327 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Cisco Systems ONS 15327?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Cisco Systems ONS 15327, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Cisco Systems ONS 15327 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)