-
ProForm 831.21002 - page 1
USER'S MANUAL A pH testing kit (not included) is required for proper use and maintenance of this product. A pH testing kit can be pur- chased at any spa or pool supply store. Model No. 831.210020 Serial No. The serial number can be found in the location shown below . W rite the serial number in the space above. CAUTION Read all precautions and ...
-
ProForm 831.21002 - page 2
T ABLE OF CONTENTS LIMITED ONE YEAR MASSAGE SP A W ARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORT ANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . ...
-
ProForm 831.21002 - page 3
3 IMPORT ANT SAFETY INSTRUCTIONS W ARNING: TO REDUCE THE RISK OF DROWNING, ELECTRIC SHOCK, OR SERIOUS INJUR Y , READ THE FOLLOWING IMPORT ANT PRECAUTIONS BEFORE USING THE RESTORA TION 2.0. READ AND FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure that all users of the RESTORA TION 2.0 are adequately informed of all precaut ...
-
ProForm 831.21002 - page 4
4 20. Do not use an extension cord with the RESTORA TION 2.0. This could damage the motor and will void the warranty . 21. DANGERÑIf you will be using the RESTORA- TION 2.0 outside, do not bury the power cord; you should also keep the power cord away from lawn mowers, hedge trimmers, and other similar equipment. 22. W ARNINGÑThe power cord is equ ...
-
ProForm 831.21002 - page 5
34. W ARNINGÑT o reduce the risk of injury or drowning: Consult your physician about pos- sible side-effects of any medications you may be taking before using the RESTORA- TION 2.0. Heat from the water , in conjunction with some medications may cause drowsi- ness and increase the risk of drowning. Others can effect blood pressure, heart rate, and ...
-
ProForm 831.21002 - page 6
6 BEFORE YOU BEGIN Thank you for selecting the innovative PROFORM ¨ RESTORA TION 2.0 Massage Spa. The RESTORA- TION 2.0 offers the features and quality of a traditional hot tub at an affordable price. Best of all, the RESTORA TION 2.0 provides the benefits of hydrother- apy in the comfort of your own home. Hydrotherapy is a proven method for sooth ...
-
ProForm 831.21002 - page 7
7 CHOOSING A LOCA TION FOR THE REST ORA TION 2.0 There are many factors to consider when choosing a location to set up the RESTORA TION 2.0. These factors vary depending on whether you use the RESTORA TION 2.0 inside or outside. We have listed several factors you may wish to consider as you decide where you want to use the RESTORA TION 2.0. If you ...
-
ProForm 831.21002 - page 8
1. Before beginning assembly , be sure that you have read and understand the information in the box above and on the previous page. Remove the two cover screws from the access cover . Remove the access cover from the Spa Unit (15) by sliding the access cover down and pulling the bottom of access cover away from the Spa Unit. Be careful not to damag ...
-
ProForm 831.21002 - page 9
4. Insert a Support Ball (8) into each mesh pocket on the underside of the Spa Cover (12). See inset drawing A. Insert the inflation tube into the hole in one of the Support Balls (8). Inflate the Support Ball. See inset drawing B. When the Support Ball (8) is inflated, remove the inflation tube and insert the ball plug through the mesh into the Su ...
-
ProForm 831.21002 - page 10
10 USING THE REST ORA TION 2.0 The RESTORA TION 2.0 is designed to seat two adults. The six thera-jets can be regulated to provide a relaxing massage to sooth away stress, and the strength of the water massage can be adjusted by the air control. The REST ORA TION 2.0 holds 120 gallons of water and offers an automatic, programmable heat- ing (70¡F ...
-
ProForm 831.21002 - page 11
USING THE CONSOLE Refer to the console diagram above. The function of each console control is explained below: T emperature: Controls the temperature of the water . The water heats at about 2.0¡F an hour with the cover on. The thermostat can be set to heat the water from 70¡F to 104¡F . Always use an accurate thermometer to check the temperature ...
-
ProForm 831.21002 - page 12
12 USING THE INSULA TION BLANKET The insulation blanket works with the spa cover to trap the heat and help the water to heat faster . T o use the blanket, simply lay it on the surface of the water after you have filled the spa and treated the water . Y ou should always replace the blanket and cover once you get out of the spa. Note: The insulation ...
-
ProForm 831.21002 - page 13
13 The RESTORA TION 2.0 is designed to provide you with years of enjoyment. Please follow the guidelines below to properly maintain your spa. MAINTENANCE SCHEDULE DAIL Y ¥ Check the water level and refill the spa to the level shown on page 8, step 1. ¥ Check the pH balance and sanitizer level. Adjust if necessary (see W A TER CHEMISTRY on this pa ...
-
ProForm 831.21002 - page 14
14 W A TER CHEMISTRY The RESTORA TION 2.0 comes with a starter chemi- cal pack for maintaining the water in the spa. (See TESTING AND TREA TING THE W A TER on page 10.) Additional chemicals can be purchased at a pool and spa supply store. CAUTION: The chemicals used to maintain the pH balance of the water and to sanitize the water can be dangerous. ...
-
ProForm 831.21002 - page 15
15 2. Unplug the power cord. 3. Remove the access cover from the back of the spa unit. 4. Remove the drainage hose from the clip and attach a garden hose to the valve on the drainage hose. 5. Open the valve by turning the knob counterclock- wise. The water will begin to drain. 6. When the spa is empty , close the valve and remove the garden hose. R ...
-
ProForm 831.21002 - page 16
16 1. SYMPTOM: THE SP A WILL NOT OPERA TE a. Check the power cord. The power cord must be plugged into a grounded outlet (see PLUG- GING IN THE REST ORA TION 2.0 on page 10). b. Check to see if the GFCI breaker is tripped, or was not turned on. Reset the GFCI breaker . 2. SYMPTOM: THE CIRCUIT BREAKER OR GFCI BREAKER TRIPS WHILE THE SP A IS OPERA TI ...
-
ProForm 831.21002 - page 17
17 8. SYMPTOM: THE W A TER PULSA TES OR THERE IS MINIMUM W A TER FLOW a. Adjust the water level. This usually occurs only when the water level is low . Add water until the thera-jets are covered (see step 1 on page 8). 9. SYMPTOM: THE W A TER IS NOT BEING CLEANED BY THE FIL TER a. Check to see if the filter is in place. Clean the filter if it is di ...
-
ProForm 831.21002 - page 18
18 P ART LISTÑModel No. 831.210020 R0198A Note: Ò#Ó indicates a non-illustrated part. Specifications are subject to change without notice. Key No. Qty . Description 1 16 Buckle Screw 2 8 Buckle 3 4 Motor Screw 4 4 W asher 5 4 Rubber Insulator 6 1 Heat Sensor 7 1 Console 8 2 Support Ball 9 1 Power Cord/Supply 10 1 Rubber Damper 1 1 1 Pump Motor 1 ...
-
ProForm 831.21002 - page 19
33 32 22 23 37 26 27 36 25 35 1 2 3 4 5 6 8 9 10 11 12 13 15 2 14 16 7 19 20 21 17 18 34 30 31 24 28 29 29 28 EXPLODED DRA WINGÑModel No. 831.210020 R0198A 19 ...
-
ProForm 831.21002 - page 20
Part No. 138228 G01 131AC R0198A Printed in USA © 1998 Sears, Roebuck and Co. Model No. 831.210020 QUESTIONS? As a manufacturer , we are commit- ted to providing complete customer satisfaction. If you have questions, or find that there are missing or damaged parts, we will guarantee complete satisfaction through direct assistance from our factory ...
Avez-vous une question à propos de ProForm 831.21002?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec ProForm 831.21002, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec ProForm 831.21002 il est probable qu’il a envie de partager la façon de le résoudre.