Français dropdown-ico

Manuel d’utilisation SmartBridges airPoint Pro Series

28 pages 1.88 mb
Télécharger

Aller à la page of 28

Summary
  • SmartBridges airPoint Pro Series - page 1

    s m a r t Bridges to the future ... Revision 1.8 Page 1 of 28 airPoint-PRO Series Wireless Access Point Quick Install Guide Installing the airPoint-PRO Series airPoint-PRO is a wireless Access Point to provide WLAN connectivity to any PC. It operates at 2.4 GHz ISM band and conforms to IEEE 802.1 1b specifications. All the acce ss poi nts in t his ...

  • SmartBridges airPoint Pro Series - page 2

    Revision 1.8 Page 2 of 28 Contents of Pac kage airPoint-PRO Outdoor l airPoint-PRO Outdoor Unit l powerShot l AC Adapter l Pole Mounting Kit : U Bracket, Nuts, W ashers l W all Mounting Kit : W all plugs, Screws l airPoint-PRO Setup Software and User Manual CD l Quick Install Guide l Coax Seal airPoint-PRO TOT AL l airPoint-PRO TOT AL Unit l powerS ...

  • SmartBridges airPoint Pro Series - page 3

    s m a r t Bridges to the future ... Revision 1.8 Page 3 of 28 for airPoint-PRO Outdoor / airPoint-PRO TOT AL Important note - Earthing Requirements: Follow National Electric Code NEC 810-20 and NEC 810-21 for this installation. Mounting the airPoint-PRO Outdoor Fix the airPoint-PRO Outdoor unit with the U bolts to the steel pipe. Make sure to tight ...

  • SmartBridges airPoint Pro Series - page 4

    Revision 1.8 Page 4 of 28 Outdoor air Point PRO Antenna airPoint-PRO Outdoor AC/DC Adapter RJ-45 Ethernet Port 1.5 Inch pipe powerShot RF Cable Ethernet Cable U-bolt ...

  • SmartBridges airPoint Pro Series - page 5

    s m a r t Bridges to the future ... Revision 1.8 Page 5 of 28 Mounting the Antenna: Follow the mounting instructions provided by the antenna manufacturer and mount the antenna on the steel pipe. Antenna should be mounted on the same pipe as the airPoint-PRO Outdoor and positioned above it. The height of the antenna and direction should be in the di ...

  • SmartBridges airPoint Pro Series - page 6

    Revision 1.8 Page 6 of 28 Mounting the airPoint-PRO TOT AL Attach the mounting arm of the airPoint-PRO T OT AL unit with the 2pcs of U bolts to the pipe. Make sure to tighten both top and bottom U bolts, with nuts and spring washers. T ighten the nuts so that the mounting arm does not rotate on the pipe. Use the external toothed washer between the ...

  • SmartBridges airPoint Pro Series - page 7

    s m a r t Bridges to the future ... Revision 1.8 Page 7 of 28 U-bolt fixing pipe to Mounting Arm Mounting Arm airPoint-PRO T OT AL RJ45 Cable Cable Tie Wea ther proof Connector ...

  • SmartBridges airPoint Pro Series - page 8

    Revision 1.8 Page 8 of 28 to airPoin t-PRO / airPoint-PRO Outdoor / airPoint-PRO T O T AL RJ45 to Network / PC AC Adapter powerShot RJ45 Cable Cross Coupler switch SB2820 Cross Coupler switch Restore Default button Note: Restore Default button at the bottom side of the powerShot should be used to restore the device back to factory / WISP defaults. ...

  • SmartBridges airPoint Pro Series - page 9

    s m a r t Bridges to the future ... Revision 1.8 Page 9 of 28 Connecting the airPoint-PRO series using Power Over Ethernet: The airPoint-PRO series is powered through the ethernet cable itself. This mode of operation gives flexibility for the user to position the airPoint-PRO at any location for best radio coverage. Connect one end of the power cor ...

  • SmartBridges airPoint Pro Series - page 10

    Revision 1.8 Page 10 of 28 Software Installation System Requirements : Computer with Windows 98/ME/NT/2000/XP with working network card Installing airPoint-PRO Setup Software : Please insert the Setup Software CD into the CD-ROM drive of your PC. The CD will run automatically . If it doesn't autorun, please browse the CD and double click on in ...

  • SmartBridges airPoint Pro Series - page 11

    s m a r t Bridges to the future ... Revision 1.8 Page 1 1 of 28 Configuring the airPoint-PRO For Windows 98 / ME / NT / 2000 / XP The factory default parameters for airPoint-PRO l DHCP Client : Enabled (IP will be acquired from the DHCP Server on the LAN.) l Administrator Password : public (case sensitive) l User password : public (case sensitive) ...

  • SmartBridges airPoint Pro Series - page 12

    Revision 1.8 Page 12 of 28 b) Configuring airPoint-PRO using a standalone PC Connect the airPoint-PRO to the PC using cross CA T5 cable. Y ou can convert straight cable to cross using a cross connector provided. Make sure the power to the airPoint-PRO is ON. T o use the simpleMonitor for configuring airPoint-PRO, you must assign a temporary IP addr ...

  • SmartBridges airPoint Pro Series - page 13

    s m a r t Bridges to the future ... Revision 1.8 Page 13 of 28 2. SETTING THE OPERA TIONAL MODE OF AIRPOINT -PRO The airPoint-PRO can operate in four different Modes, namely l Access Point - In this mode the airPoint-PRO is operating as a normal 802.1 1b compliant Access Point. Client Info and Client Auth T abs of simpleMonitor will be enabled in t ...

  • SmartBridges airPoint Pro Series - page 14

    Revision 1.8 Page 14 of 28 1. Point to Point - This mode lets one airPoint-PRO talk to another airPoint-PRO wirelessly linking two Ethernet LANs behind together . 2. Point to MultiPoint - This mode lets multiple airPoint-PRO linking multiple Ethernet LANs. Wireless Bridge T ab of simpleMonitor will be enabled in this mode. l Wireless Repeater - In ...

  • SmartBridges airPoint Pro Series - page 15

    s m a r t Bridges to the future ... Revision 1.8 Page 15 of 28 ...

  • SmartBridges airPoint Pro Series - page 16

    Revision 1.8 Page 16 of 28 4. SECURITY T AB The airPoint-PRO can operate in four different Modes, namely l By default encryption is disabled which means the communication is not secure. In case you want to have a secure communication, ensure that the WEP encryption keys are set. l T o set the encryption keys click on security tab: - Select the Desi ...

  • SmartBridges airPoint Pro Series - page 17

    s m a r t Bridges to the future ... Revision 1.8 Page 17 of 28 Note: For WEP encryption the default format is HEX format. Incase of any wireless clients using the ASCII keys for the WEP , use the ASCII to HEX converter table for same. See Appendix B. Note: The Authentication type must be the same on the Clients and on the airPoint-PRO. All shared k ...

  • SmartBridges airPoint Pro Series - page 18

    Revision 1.8 Page 18 of 28 The RSSI values are shown in dBm in ClientInfo and Associated AP Info T ab as per the internal formula. If you want your specific values to be shown in there, please store them in the table and set the option as "User Defined" from the Advanced T AB. Configuring the airPoint-PRO in Access Point Mode In this mode ...

  • SmartBridges airPoint Pro Series - page 19

    s m a r t Bridges to the future ... Revision 1.8 Page 19 of 28 The following information about all the associated clients is available in real time; the values are refreshed after every 5 seconds. l MAC Address l Received Signal Strength Indication ( RSSI ) in both % and dBm l Link Quality l IP Address is shown only if some traffic exists between a ...

  • SmartBridges airPoint Pro Series - page 20

    s m a r t Bridges to the future ... Revision 1.8 Page 20 of 28 Note: Client to Client communication T AB is disabled in the repeater mode If the client gets disassociated from the airPoint-PRO due to any reason ( power down etc ) you will continue to see the entry in the list for upto 5 minutes, before it is removed from the list. Y ou can Enable/D ...

  • SmartBridges airPoint Pro Series - page 21

    Revision 1.8 Page 21 of 28 External Radius Server Authorization T o authorize clients using the External Radius Server please key in the following parameters and Click on Set Parameters button. l Source Port (Default Port is 1812) l Destination Port (supported in F/W 1.4.j.7 onwards) l Radius Server IP Address l Secret Key l Reauthorization T ime i ...

  • SmartBridges airPoint Pro Series - page 22

    Revision 1.8 Page 22 of 28 Configuring the airPoint-PRO in Client Bridge Mode In this mode the airPoint-PRO is operating as ethernet client, and it can associate only with another airPoint-PRO operating as an access point. In this Mode Site Survey and Link Status Tabs of simpleMonitor will be enabled. Associating with the Access Point - SiteSurvey ...

  • SmartBridges airPoint Pro Series - page 23

    s m a r t Bridges to the future ... Revision 1.8 Page 23 of 28 Configuring the airPoint-PRO in Wireless Bridge Mode In this mode airPoint-PRO can bridge 2 or more LANs wirelessly . Please select the Wireless Bridge T ab of simpleMonitor for configuring the airPoint-PRO in Wireless Bridge Mode. airPoint-PRO in Wireless Bridge has 2 different subMode ...

  • SmartBridges airPoint Pro Series - page 24

    Revision 1.8 Page 24 of 28 1. Point to Point This mode lets one airPoint-PRO talk to another airPoint-PRO wirelessly linking two Ethernet LANs together . A feature in this mode is that each airPoint-PRO must specify the MAC address of the airPoint-PRO at the opposite end of the wireless bridge. When the airPoint-PRO is set to this mode, it can&apos ...

  • SmartBridges airPoint Pro Series - page 25

    s m a r t Bridges to the future ... Revision 1.8 Page 25 of 28 Repeater in Access Point Role The operation will be exactly same as Access Point serving the local clients, Access Point Mode information is equally applicable in this role. Please refer to Access Point Configuration details in Access Point Mode Section. Repeater in Wireless Client Role ...

  • SmartBridges airPoint Pro Series - page 26

    Revision 1.8 Page 26 of 28 5. Dial a Power Changing the output Power of airPoint-PRO Select Dial a Power T ab of simpleMonitor to change the output power of airPoint-PRO. This feature of airPoint-PRO allows the user to control the radio transmit power of the airPoint- PRO from the SimpleMonitor software. Make use of the user interface controls in t ...

  • SmartBridges airPoint Pro Series - page 27

    s m a r t Bridges to the future ... Revision 1.8 Page 27 of 28 Restore Factory Default Settings If you forget the critical settings like WEP or Administrator Password of the airPoint-PRO, you can restore the airPoint-PRO to the Factory Default Settings as, 1. Make sure that the Power to the airPoint-PRO is ON. ( indicated by PWR LED ) 2. Locate and ...

  • SmartBridges airPoint Pro Series - page 28

    Revision 1.8 Page 28 of 28 Appendix B ASCII to Hexadecimal Conversion T able Operating T emperature Range airPoint-PRO : 0 °C ~ +50 °C (+32 °F ~ +122 °F) airPoint-PRO Outdoor / T OT AL : -40 °C ~ +65 °C (-40 °F ~ +150 °F) Ingress Specification : IP65 for airPoint-PRO Outdoor / T OT AL Note: Please refer to the User Guide found on the Setup ...

Fabricant SmartBridges Catégorie Network Card

Les documents que nous recevons du fabricant de l'appareilSmartBridges airPoint Pro Series peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques SmartBridges
- manuels d’utilisations airPoint Pro Series
- fiches produit SmartBridges
- dépliants
- ou étiquettes-énergie SmartBridges airPoint Pro Series
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation SmartBridges airPoint Pro Series.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation SmartBridges airPoint Pro Series, manuels d’entretien, brefs manuels ou manuels de l’utilisateur SmartBridges airPoint Pro Series. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit SmartBridges airPoint Pro Series.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil SmartBridges airPoint Pro Series, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser SmartBridges airPoint Pro Series par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs SmartBridges airPoint Pro Series.

Le manuel d’utilisation complet SmartBridges, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel SmartBridges airPoint Pro Series - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières SmartBridges airPoint Pro Series, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lSmartBridges airPoint Pro Series qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil SmartBridges airPoint Pro Series - qui devraient nous aider dans les premières étapes lors de l'utilisation SmartBridges airPoint Pro Series
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de SmartBridges airPoint Pro Series
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service SmartBridges airPoint Pro Series dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de SmartBridges airPoint Pro Series?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec SmartBridges airPoint Pro Series, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec SmartBridges airPoint Pro Series il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)