Français dropdown-ico

Manuel d’utilisation Hitachi SJ-FB

35 pages 0.91 mb
Télécharger

Aller à la page of 35

Summary
  • Hitachi SJ-FB - page 1

    FOR HITACHI INVERTER SJ-FB (Feed-Back Board) INSTRUCTION HITACHI NB616XB Thank you for purchasing the SJ-FB (HITACH I FEED-BACK BOARD) . This manual ex p lains the o p eration of th e feed-back boar d for use with ...

  • Hitachi SJ-FB - page 2

    SAFETY To get best performance with SJ-FB (Feedback Board) , read this m anual, the SJ300 Instruction Manual, and all of th e warning labels attached to the i nverter carefull y before installation and operation, and follow the in structions exactly. Keep this manual handy for your qu ick reference. Definitions and Symbols A safety instru ction (me ...

  • Hitachi SJ-FB - page 3

    care should be taken to protect against shock. S tand on an insula ting pad and make it a habit to u se only one han d when checking component s. Alway s work with another person in case an emerg ency occurs. Disconne ct power before checking controllers or per forming main tenance. Be sure th e equipment is prop erly grounded. W ear safety gla sse ...

  • Hitachi SJ-FB - page 4

    Revision History Table No . Revision Contents The Date of Issue Oper ation Manual No. 1 A B Initial Release of Manual NB616X Revision A, by P. Curtis/H itachi Amer ica, Ltd. Revision B, by P. Curtis/H itachi Am erica, Ltd. Feb. 2000 August 2000 August 2001 NB616X NB616XA NB616XB ...

  • Hitachi SJ-FB - page 5

    WARNING Only qualified personnel should carry out wiring work. Otherwise, the re is a danger of elect ric shock and/or fire. Implement wiring after checking that the power supp ly is off. Otherwise, the re is a danger of electric sh ock and/or injury. Be sure not to touch inside the inverter case and terminals of the option b oard while the inverte ...

  • Hitachi SJ-FB - page 6

    CAUTION Do not allow materi als such as cutting wa ste, welding sputter, wire fragments, solde r balls, dust etc. to come into contact with the unit. There is a fire risk. Inverter main body and option boa rd must be mounted securely. There is a risk of intermittent connection due to vibration. Tighten the screws of the enco der line on the option ...

  • Hitachi SJ-FB - page 7

    CONTENTS Contents PAGE Chapter 1 GENE RAL DESCRIPTI ONS 7 1.1 Inspection upon unpacking 7 1.2 Inquiries and Warranty 7 1.2.1 Inquiries 7 1.2.2 Warrant y 7 Chapter 2 OUTLINE OF SJ -FB 8 Chapter 3 INSTALLATION 9 Chapter 4 WIRI NG AND CONNECTI ON 10 4.1 Termi nal Assignme nts of the SJ-FB Bo ard 10 4.2 Function Explana tion of the Terminals 11 4.3 Ter ...

  • Hitachi SJ-FB - page 8

    8 Chapter 1 GENERAL DESCRIPTIONS 1.1 Inspection upon unpacking Handle with care. Please veri fy the conten ts of the p a ckag e check for an y damage that may have occurred during transportation. (Package contents) 1. SJ-FB (Feed back boar d) 1 2. Instruction manual 1 3. Board moun ting screws (M3 × 8mm) 2 Please contact your supplier or Hitachi D ...

  • Hitachi SJ-FB - page 9

    9 Chapter 1 GENERAL DESCRIPTIONS the local Hitach i Distributor. ...

  • Hitachi SJ-FB - page 10

    10 Chapter 2 OUTLINE OF SJ-FB This manual describes the option board SJ-FB for the SJ300 series inverter. This SJ-FB board, installed in an SJ300 inverter, detects the rotation speed of a motor by accepting pulses from a shaft-mounted motor encoder, achieving highly accurate speed regulation. This SJ-FB board can also be used to c ontrol motor stop ...

  • Hitachi SJ-FB - page 11

    11 Chapter 3 INSTALLATION How to Mount the SJ-FB Board Align the holes at the four corners of the SJ-FB board to the guide posts for positioning, in option port 1 or 2 of the inverter. Then gently push th e option board into position, making sure the board is fully seated in its connector. Install two screws to secure the board to the inverter body ...

  • Hitachi SJ-FB - page 12

    12 Chapter 4 WIRING AND CONNECTION 4.1 Terminal Assignments of the SJ-FB Board Outlook of SJ-FB TM1 TM2 Dip switch SWENC Dip switch SWR Connector for Main body connection EP5 EG5 EAP EAN EBP EBN EZP EZN TM1 terminal assignment SAP SAN SBP SBN AP AN BP BN TM2 terminal assignment Figure 4-1 Terminal assignments ...

  • Hitachi SJ-FB - page 13

    13 Chapter 4 WIRING AND CONNECTION 4.2 Function Explanation of the Terminals Terminal Code Function Common terminal electrical specifications Pulse train position command input s SAP SAN SBP SBN Pulse train positi on command input (see page 16) • Mode 0 : 90 degree phase difference pulse (quadrature) • Mode 1 : Forward/R everse signal; pulse t ...

  • Hitachi SJ-FB - page 14

    14 Chapter 4 WIRING AND CONNECTION Figure 4-2 Terminal wiring H O L SJ-FB (Feed-back board) Invert er main body c ontrol Configure to an intelli gent input term. 1-8 EP5 EG5 EAP EAN EBP EBN EZP EZN M EC Motor w ith encoder SAP SAN SBP SBN Pulse train pos. command POK Pos itioning complet ion signal ZS Zero speed signal DSE Speed deviation excess iv ...

  • Hitachi SJ-FB - page 15

    Chapter 4 WIRING AND CONNECTION (Note 3) : Be sure to separate the power wiring fr om the control circuit wiring. If they have to be crossed, be sure that they cross at a right angle. Power cables R, S, T, U, V, W, P, PD, RB, N, R0, T0 etc . Right angle Input/O utput signal lines Control si gnals (STAT, ORT, LAC, PCLR, SAP, SAN, SBP, SBN, EAP, E AN ...

  • Hitachi SJ-FB - page 16

    16 Chapter 5 SETTING 5.1 Setting the DIP Switches SWENC SWR Layout of SJ-FB 1 2 O F F Slide to the (O FF) marked side of the swit ch to tur n it off and th e opposite si de to tur n it on. How to Set Switches SWENC and SWR [ON/OFF] TM1 TM2 Figure 5-1 Switch arrangement figure 5.2 Switch Initial Settings Setting item Switch No. Contents ON Detection ...

  • Hitachi SJ-FB - page 17

    17 Chapter 5 SETTING 5.3 Inverter Configuration Parameters f or the SJ-FB Board Code Function name Setting range Initial data Setting on run Change mode on run A044 1 st control method 00(VC) / 01(VP1.7power) / 02 (Free V/f Setting) / 03(SLV) / 04 (0Hz area SLV) / 05 (V2) 00 - - H001 Auto-tuni ng mode selection 00(NOR : Invalid) / 01(NRT : not rota ...

  • Hitachi SJ-FB - page 18

    18 Chapter 5 SETTING Code Function name Setting range Initial data Setting on run Change mode on run H034 The 1 st motor J setting (Auto-tuning data) 0.000 - 9.999 / 10.00 - 99.99 / 100.0 - 9999.( kgm 2 ) depends on the motor capacity - - H050 1 st PI control proportional gain setting 0.00 - 99.99 / 100.0 - 999.9 / 100 0.(%) 100.0   H051 1 st ...

  • Hitachi SJ-FB - page 19

    19 Chapter 5 SETTING (Note 1) : Please refer to the inst ruction manual of the inverter m ain body as to the setting procedure. (Note 2): When the over speed abnormal detection le vel (P026), the speed e rror over detection level (P027) are set 0, the Abnormal detecti on data processing will be invalid. (Note 3): Regarding the SJ-FB se tting, there ...

  • Hitachi SJ-FB - page 20

    20 Chapter 5 SETTING 5.4 Setting Flowchart for the DIP S witches START Detect a wire break of A, B phase signal? Use the pulse train position command input? Set SWENC1 switch OFF. Set SWR1,2 switch ON. Detect a wire break of the Z phase signal? Set SWENC2 switch ON. Set SWENC1 switch ON. Set SWENC2 switch OFF. Turn SWR1, 2 on only 1 unit that is th ...

  • Hitachi SJ-FB - page 21

    21 Chapter 6 OPERATION Refer to [Chapter 3 OPERATION] in the in struction manual for the SJ300 inverter before operating with this board. When the operation comma nd is given from the terminal side of the inverter main body, operate with the following procedure. <Procedure> 1. Turn ON the POWER switch of the inverter. 2. Set the control metho ...

  • Hitachi SJ-FB - page 22

    22 Chapter 6 OPERATION (Note 6) : If satisfactory performance can not be obtained, adjust the motor constants for the particular symptoms observed according to following table: Inverter Status Symptom Observed Adju stment Guidelines Parameter(s) to Adjust At starting Shock occurs at starting Set “Motor constant J” higher gradually, up to 1.2 ti ...

  • Hitachi SJ-FB - page 23

    23 Chapter 7 FUNCTIONS A044: 1 st Control Meth od P014: Orientation Stop Position P015: Orientation Speed setting P016: Orientation Direction setting P017: Completion range setting P018: Completion delay time P023: Position loop g ain C001-C008: Intelligent input te rminal C021-C025: Intellig ent output terminal Relation 7.1 Orientation function Th ...

  • Hitachi SJ-FB - page 24

    24 Chapter 7 FUNCTIONS 4. Inverter maintains the position after the completion, and outputs the ‘position control completion (POK) signal’ after the set value of ‘delay time setting (P018). (Inverter drives the motor reverse and return to the required stop position in the case it exceeds the required stop position.) 5. When the ORT terminal i ...

  • Hitachi SJ-FB - page 25

    25 Chapter 7 FUNCTIONS 7.1.2 Data setting Data setting related to speed control Setting item Function code Setting Range, Setting Con tents Orientation speed set ting (Note 1) P015 0.00 ∼ 99.99 / 10 0.0 ∼ 120.0 (Hz) Orientation direct ion setting (Note 2) P016 0:Forward / 1:R everse (Note 1) : In order to stop the motor for setti ng position. ( ...

  • Hitachi SJ-FB - page 26

    26 Chapter 7 FUNCTIONS Data setting of the input-output terminal Input-output ter minal Terminal assig nment Contents Input ORT terminal (ORT) Set up 45 to one of them of C 001 ∼ C008 ON : Orient ation mode Output Positioning completion signal (POK) Set up 23 to one of them of C 021 ∼ C025 Output when it comes to the po sitioning completion ra ...

  • Hitachi SJ-FB - page 27

    27 Chapter 7 FUNCTIONS Master Inverter Slave Inverter AP,BP AN,BN SAP,SBP SAN,SBN EG5 EAP,EBP EAN,EBN EG5 EAP,EBP EAN,EBN M EC M EC Main Motor Sub Motor Figure 7-3 Wiri ng for Synchronized Operation (Note) : Please connect EG5 of the main and sub inverter together to avoid malfunction caused by EMC noise. 7.3.3 Data setting Data setting related to ...

  • Hitachi SJ-FB - page 28

    28 Chapter 7 FUNCTIONS (Note 3) : N/D must be given as the ranges of 1/50 ≤ (N/D) ≤ 20. (N: Electronic gear ratio numerator, D: Electronic gear ratio denom inator) (Note 4) : It depends on what type of ma in body combines with the SJ-FB, the setting value conversion is differen t. Please refer to the (Note 3) of the “5.3 Items regarding the f ...

  • Hitachi SJ-FB - page 29

    29 Chapter 7 FUNCTIONS [Setting example] Main Motor : Encoder pulse 1024 pulses Sub Motor : Encoder pulse 3000 pulses (Main motor rotation speed) : (sub motor rotation speed) = 2 : 1 Set the following for slave inverter in this case. Electronic gear setting position (P019) : RET (command pulse side) Electronic gear numerator (P020) : 3000 Electroni ...

  • Hitachi SJ-FB - page 30

    30 Chapter 7 FUNCTIONS 7.3.4 Pulse train mode selection The following 3 ways of pulse line input can be selected by the setting of P013. 1) 90 ° phase difference pulse train (Mode 0) 2) Forward/Reverse command + pulse train (mode 1) 3) Forward pulse train + Reversion pulse train (mode 2) SAP SAN SBP SBN Forward Reverse (Pulse train input) (Pulse t ...

  • Hitachi SJ-FB - page 31

    31 Chapter 7 FUNCTIONS A044: 1 st Control Meth od P052: 1 st Proportional gain 7.4 Speed control (P/PI) switching function Relation Speed control mode is normally controlled by proportional-integration compensation (Pi), which keeps the deviation between the actual speed and speed command becomes 0. Further, you can also achieve a propotional contr ...

  • Hitachi SJ-FB - page 32

    32 Chapter 7 FUNCTIONS 7.5 Compensation of secondary resistor function (Temperature revision) P025: Compensation of sec ondary resistor selection b098: Thermistor se lection b099: Thermistor er ror level C085: Thermistor adjustment Relation Please use this function, if you want to do the temperature revision to restrain the speed fluctuation by the ...

  • Hitachi SJ-FB - page 33

    33 Chapter 8 PROTECTION FUNCTION 8.1 Action selection in case of option error To ignore or make inverter trip can be selected in case of option error. Item Functi on code Data Contents 00 TRP: Inverter trips and outputs alarm signal. Action selection in case of option error P001 / P002 01 RUN: Inverter ignores the option e rror and continues the op ...

  • Hitachi SJ-FB - page 34

    34 Chapter 8 PROTECTION FUNCTION frequency setting (A004). Please confirm the case, orientation speed setting (P015) and highest frequency setting (A004). ...

  • Hitachi SJ-FB - page 35

    Chapter 8 PROTECTION FUNCTION Product specification Item Specification Encoder feed-back: • Standard encoder pulse number 1024 pulse/r • Max. input pulse 100k pulse/s Speed control Speed con trol system: • Proportional-Integral (PI) / Proportional (P) control Position command: • Three kinds of pulse train input selectable by main body setti ...

Fabricant Hitachi Catégorie Power Supply

Les documents que nous recevons du fabricant de l'appareilHitachi SJ-FB peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Hitachi
- manuels d’utilisations SJ-FB
- fiches produit Hitachi
- dépliants
- ou étiquettes-énergie Hitachi SJ-FB
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Hitachi SJ-FB.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Hitachi SJ-FB, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Hitachi SJ-FB. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Hitachi SJ-FB.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Hitachi SJ-FB, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Hitachi SJ-FB par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Hitachi SJ-FB.

Le manuel d’utilisation complet Hitachi, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Hitachi SJ-FB - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Hitachi SJ-FB, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lHitachi SJ-FB qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Hitachi SJ-FB - qui devraient nous aider dans les premières étapes lors de l'utilisation Hitachi SJ-FB
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Hitachi SJ-FB
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Hitachi SJ-FB dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Hitachi SJ-FB?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Hitachi SJ-FB, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Hitachi SJ-FB il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)