Français dropdown-ico

Manuel d’utilisation Allied Telesis AT-FS202

44 pages 0.61 mb
Télécharger

Aller à la page of 44

Summary
  • Allied Telesis AT-FS202 - page 1

    AT-FS201 AT-FS202 AT-FS202SC/FS1 AT-FS202SC/FS2 AT-FS202SC/FS3 AT-FS202SC/FS4 Fast Ethernet Series Switches Installation Guide PN 613-10761-00 Rev E ...

  • Allied Telesis AT-FS202 - page 2

    Copyri ght © 2004 Allied Telesyn In ternational, Corp. All rights reserved. No part of this pu blication may be repr oduced without prior written permission from Allied Telesyn International, Corp. Ethernet is a regist ered trademark of Xerox Corporatio n. All other product n ames, company names, lo gos or other designatio ns mentioned herein are ...

  • Allied Telesis AT-FS202 - page 3

    iii Electrical Safety and Emission Compliance Statement Standards : This product meets th e following standards. RFI Emissio n EN55022 Class A  1 Warning : In a domestic environment this pr oduct may cause radio interference in which case the user may be required to take adequate measures.  2 Immunity EN55024  3 Warning : This product requ ...

  • Allied Telesis AT-FS202 - page 4

    Electrical Safety and Emission Compliance Statement iv Important : Appendix B contains translated safety statements for installing this equipment. Wh en you see the  , go to Appendix B for the translated safety statement in your lan guage. Wichtig : Anhang B enthält übersetzte Sicherheitshinweise für die Installation dieses Geräts. Wenn Sie ...

  • Allied Telesis AT-FS202 - page 5

    v Table of Contents Electrical Safety and Emi ssion Compli ance Statement .......... ............ iii Welcome to Allied Telesyn ......... ........... ............ ........... ........... ........... ........ vii Where to Find Web-based Guides ................ ........... ............ ........... ........... ..... vii Document Conventions .......... ...

  • Allied Telesis AT-FS202 - page 6

    Table of Contents vi Chapter 3 Troubl eshooting .......... ............ ........... ........... ........... ........... .............. ........... 19 Appendix A Technical Specifications ......... ............ ........... .............. ........... ........... ........ 21 Physical .......... .............. ............ ........... ........... ...... ...

  • Allied Telesis AT-FS202 - page 7

    vii This guide conta ins instructi ons on how to install the AT-FS20x and AT-FS202SC/FSx S eries switches. Where to Find Web-based Guides The Allied Telesyn web site at www.alliedtelesyn.com offers you an easy way to access the most recent docu mentation, software, and technical information for all of our products. Fo r product guides, select “Su ...

  • Allied Telesis AT-FS202 - page 8

    Welcome to Allied Telesyn viii Contacting Allied Telesyn This section provides Allied Telesyn co ntact information for technical support as well as sales or corporate informat ion. Online Support You can request technical support on line by accessing the Allied Telesyn Knowledge Base from th e following web site: www.alliedtelesyn.com/kb . You can ...

  • Allied Telesis AT-FS202 - page 9

    1 Chapter 1 Description The AT-FS20x and AT-FS202SC/FSx Seri es Switches include the following models: The AT-FS20x Series switches are design ed to extend the distance of your network by converti ng Fast Ethernet data between twisted-pair ca bling and either multimode or single -mode fiber optic cabling. These dual- port switches can also be used ...

  • Allied Telesis AT-FS202 - page 10

    Description 2 Figure 1 illustrates the front panel of an AT-FS20x Series switch. Figure 1 AT-FS20x Series Front Panel (AT-FS202 Model) Figure 2 illustrates a front panel of an AT-FS202SC/FSx Series switch. Figure 2 AT-FS202SC/FSx Series Front Panel (AT-FS202SC/FS4 Model) The back panel of the AT-FS20x and AT-FS202SC/FSx Series swi tches features a ...

  • Allied Telesis AT-FS202 - page 11

    AT-FS20x Series Installation Guide 3 Table 1 lists the maximum operating distances for the switches. Table 1 Maximum Operating Distances Model 100Base-FX 10/100B ase-TX Connector Maximum Operating Distance 1 1. Maximum distance fo r 100 Mbps optica l datalinks is dependen t on the following fact ors: type of optical fiber, duplex mode of both end-n ...

  • Allied Telesis AT-FS202 - page 12

    Description 4 Key Features The AT-FS20x switches have the following features: ❑ LEDs for unit a nd port statu s ❑ Auto MDI/MDI-X ❑ DIP switches for configuring the ports ❑ Half- or full-duplex operation on both ports ❑ RJ-45 twisted-pair connector ❑ SC or ST fiber optic connector ❑ Data packet forwarding and filterin g at full wire sp ...

  • Allied Telesis AT-FS202 - page 13

    AT-FS20x Series Installation Guide 5 Twisted-Pair Port The AT-FS20x and AT-FS202SC/FSx Se ries switches have one 10Base-T/ 100Base-TX twisted-pair port. The twis ted-pair port features an RJ-45 connector. Port Speed The twisted-pair port is compliant with the 10Base-T and 10Base-TX standards and is capable of either 10 Mb ps or 100 Mbps operat ion. ...

  • Allied Telesis AT-FS202 - page 14

    Description 6 The twisted-pair port on the switch can operated in either half- or full-duplex mode. You can set the duplex mode manu ally or allow the switch to set it automatically through Auto-Negotiation . With Auto-Negot ia tion, if the end- node is capable of full-duplex mode, the twisted-pair port is set automatically to full-duplex mode. If ...

  • Allied Telesis AT-FS202 - page 15

    AT-FS20x Series Installation Guide 7 Switch Performance The AT-FS20x switches have th e following performance values: ❑ 148,800 pps for 100 Mbps and 14,880 pps for 10 Mbps for full wire speed forwarding and filterin g ❑ 200 Mbps maximum throughput in 100 Mbps, full -duplex mode ❑ 20 Mbps maximum throughput in 10 Mbps, full-duplex mode ❑ Sto ...

  • Allied Telesis AT-FS202 - page 16

    Description 8 Store and Forward The AT-FS20x switches suppo rt store and fo rward switching at Fast Ethern et full-wire speed in 100 Mbps, half- or fu ll-duplex mode. Pack ets entering each port are stored in buffers. Once the pack et is received, the switch forwards or discards the packet, depe nding on its destination address and error status. Th ...

  • Allied Telesis AT-FS202 - page 17

    AT-FS20x Series Installation Guide 9 Figure 4 illustrates a topology usi ng one AT -FS202 switch to interconnect two small networks of stackable hubs . Figure 4 Typical Config uration Using the AT-FS202 Switch AT-8026C AT-FS202 AT-FS708 170 Twisted Pair Fiber Optic ...

  • Allied Telesis AT-FS202 - page 18

    Description 10 ...

  • Allied Telesis AT-FS202 - page 19

    11 Chapter 2 Installing the Switch This chapter explains how to inst all an AT-FS2 0x and AT-FS202SC/FSx Series switches. These sw itches can be installed on a desktop or in an AT-MCR12 chassis. The procedures pr ovided in this chapter are for installation on a desktop. To install a switch in th e AT-MCR12 chassis, see the AT-MCR12 Chassis Installa ...

  • Allied Telesis AT-FS202 - page 20

    Installing the Switch 12 Planning the Installation Be sure to observe the foll owing guidelines when plan ning the installation of your switch. ❑ The end-node connected to the 100Ba se-FX fiber optic port must be able to operate at 100 Mbps. ❑ The end-node connected to the 10Base-T/100Base-TX twisted-pair port can operate at either 10 Mbps or 1 ...

  • Allied Telesis AT-FS202 - page 21

    AT-FS20x Series Installation Guide 13 Note See “Fiber Optic Port Specifications” on page 22 for addi tional information on the fiber o ptic port. AT-FS202 50/125 or 62.5/ 125 micro n multimode 2 km (1.2 mi) 13 dB at 1310 nm AT-FS202SC/FS1 50/125 or 62.5/ 125 multi mode 2 km (1.2 mi) 13 dB at 1310 nm 9/125 micron single-mode 15 km (9.3 mi) 16 dB ...

  • Allied Telesis AT-FS202 - page 22

    Installing the Switch 14 ❑ Refer to Table 5 for the cabling specificatio ns for the fiber optic port operating in half-duplex mode. Table 5 100Base-FX Fiber Optic Ports (Half-duplex) 1 1. The total dista nce of the fib er optic lengths can not exceed the limi ts stated in the table. Each switch used inline within a single collisi on domain reduce ...

  • Allied Telesis AT-FS202 - page 23

    AT-FS20x Series Installation Guide 15 Installing the Switch This section provides a procedure for installing the AT-FS2 0x switches. When setting the DIP switches consider the following: ❑ Setting the Aut o Neg DIP switch for the twi sted-pair port to ON or OFF enables or disables auto-negotia tion for the port. If you disable auto-negotiation, b ...

  • Allied Telesis AT-FS202 - page 24

    Installing the Switch 16 Caution After you change the speed or duplex mode of the switch, you must power cycle (shut down and restart) the sw itch for the new settings to take affect. 4. Place the switch on a secure, level surface, leaving ample space around the switch for ventilation. 5. Plug the AC/DC power adapter into an appropriate AC power ou ...

  • Allied Telesis AT-FS202 - page 25

    AT-FS20x Series Installation Guide 17 10. Connect the twisted-pair cabl e (or cables) to the end node. See Table 7 for information about setting the duplex mode. You must set the AT-FS20x switch and the end node to auto negotiate or make their port speeds match. Table 7 Setting the Du plex Mode 11. Power ON the end-nodes. 12. Verify that the LNK/AC ...

  • Allied Telesis AT-FS202 - page 26

    Installing the Switch 18 ...

  • Allied Telesis AT-FS202 - page 27

    19 Chapter 3 Troubleshooting Follow the guidelines below to test and troubleshoot the in stallation in the event a problem occurs. Note Whenever the speed and/or duplex mode are changed during or after power ON, power OFF then power bac k ON the switch to load the new configuration. If the PWR LED is OFF, do the following: ❑ If the switch is inst ...

  • Allied Telesis AT-FS202 - page 28

    Troubleshooting 20 ❑ Make sure that the twisted-pair ca ble does not exceed 100 meters ( 328 feet) and that you are using a Catego ry 3 or better cable for 10Base-T operation or a Category 5 or better cable for 100Base-TX operation. For information about maximum operating distances, see Table 1 on page 3 . If the LNK/ACT LED for the fiber o pti c ...

  • Allied Telesis AT-FS202 - page 29

    21 Appendix A Technical Specifications Physical Dimensions: W x D x H 10.5 cm x 9.5 cm x 2.5 cm (4.12 in x 3.75 in x 1.0 in) Weight: 294 g (10.4 oz) Temperature Maximum Operating: 0° C to 40° C (32° F to 104° F) Maximum Storage: -20° C to 80° C (-4° F to 176° F) Relative Humidity: 5% to 95% non-condensing Operating Altitude: Up to 3, 048 me ...

  • Allied Telesis AT-FS202 - page 30

    Technical Specifications 22 Agency Certifications Safety Conforms to all standards normally support ed by Allied Telesyn prod ucts including safety standards UL 1950, CSA 22.2 No. 950 , TUV EN60950, EN60825 CE Compli ant Standard CE Compliant IEEE 802.3, IEEE 802.3u Immunity Conforms to EN55024 immunity standard EMI/RFI Meets all applicable re quir ...

  • Allied Telesis AT-FS202 - page 31

    AT-FS20x Series Installation Guide 23 Table 9 Fiber Optic Receiver Table 10 Fiber Optic Datalink Model Fiber Type 1 1. MMF = Multimode Fiber / SMF = Single-mode Fiber. Fiber Optic Diameter (micron s) Optical Wavelength Receiver Sensitivity (dBm) Min. Avg. Saturation AT-FS201 & AT-FS202 MMF 50/125 1310 nm -31.8 -34.5 -14.5 MMF 62.5/125 1310 nm - ...

  • Allied Telesis AT-FS202 - page 32

    Technical Specifications 24 Table 11 Fiber Optic Loss Specification (Benchmark) Pinout Assignments Figure 5 shows the pin assignment s of the RJ-45 connector. Figure 5 RJ-45 Pin Assignmen ts AT-FS202SC/ FS3 9/125 SMF 33.00 d B 35.00 dB 15 km (9.4 mi) 75 km (46 mi) AT-FS202SC/ FS4 9/125 SMF 34.0 35.5 dB 40 km (24.8 mi) 100 km (62 mi) 1. MMF = Multim ...

  • Allied Telesis AT-FS202 - page 33

    AT-FS20x Series Installation Guide 25 Table 12 lists the 10Base-T/100Base-TX co nnector pins and their signals when the port is oper ating in either MDI or MDI-X configu ration. Table 12 RJ-45 Pinouts MDI-X (Default) Signal MDI Signal 1 RX+ 1 TX+ 2 RX- 2 TX- 3 TX+ 3 RX+ 4 - 4 - 5 - 5 - 6 TX- 6 RX- 7 - 7 - 8 - 8 - ...

  • Allied Telesis AT-FS202 - page 34

    Technical Specifications 26 ...

  • Allied Telesis AT-FS202 - page 35

    27 Appendix B Translated Safety and Emission Information Important : This appendix cont ains multip le-languag e translations for the safety statements in this guide. Wichtig : Dieser Anhang enth ält Übersetzungen der in diesem Handbuch enthaltenen Sicherheitshinwe ise in mehreren Sprachen. Vigti gt : Dette tillæg indeholder oversættelser i fle ...

  • Allied Telesis AT-FS202 - page 36

    Translated Safety and Emission Information 28 Standards : This product meets th e following standards.  1R F I E m i s s i o n EN55022 Class A  2 Warning : In a domestic environment t his product may cause radio interference in which case the user may be required to take adequate measures.  3 Immunity EN55024  4 Warning : This product r ...

  • Allied Telesis AT-FS202 - page 37

    AT-FS20x Series Installation Guide 29 USA/Canada Use a UL Listed/CSA Certifie d AC adapter of DC 12V, 500mA. Europe - EU Use TÜV licensed AC adapter of DC 12V, 500mA. UK Use a UK Safety Approved AC ad apter of DC 12V, minimum 500mA.  13 Operati ng Temper ature: This pro duct is designed for a maximum ambient temperature of 40 degrees C.  1 4 ...

  • Allied Telesis AT-FS202 - page 38

    Translated Safety and Emission Information 30 Standarder : Dette produkt tilfredsstille r de følgende standarder.  1R a d i o f r e k v e n s forstyrrelsesemission EN55022 Klasse A  2 Advarsel : I et hjemligt miljø kunne d ette produkt forårsage radio forstyrrelse. Bliver det tilfældet, påkræves brug eren muligvis at tage tilstrækkelig ...

  • Allied Telesis AT-FS202 - page 39

    AT-FS20x Series Installation Guide 31  7 Waarshuwi ng Klasse-1 laser pro dukt.  8 Waarchuwing Neit in de straal staren.  9 Dit is een “Klasse 1 LED-produkt” Veiligheid  10 Gevaar Voo r Bliksemins lag Gevaar : Niet aan t oestellen of kabels werken bij bliksem.  11 Ventilatiegaten niet blokke ren.  12 Stroom mag alleen via de ad ...

  • Allied Telesis AT-FS202 - page 40

    Translated Safety and Emission Information 32  13 Température De Fonctionneme nt Ce matériel est capable de tolérer un e température ambiante maximum de 40 degrés Celsius.  14 Pour Tous Pays : Installer le matériel conf ormément au x normes électriques nationale s et locales. Standardit : Tämä tuote on seuraav ien standardien mukain ...

  • Allied Telesis AT-FS202 - page 41

    AT-FS20x Series Installation Guide 33 Standard : Questo prodotto è confor me ai seguenti standard.  1 Emissione RFI (interferenza di radiofrequenza) EN55022 Classe A  2 Avvertenza : in ambiente domestico questo prodot to potrebbe causare radio interferenza. In questo caso potrebbe richied ersi all'utente di prendere gli adeguati prov ve ...

  • Allied Telesis AT-FS202 - page 42

    Translated Safety and Emission Information 34  6 Laser EN60825  7A d v a r s e l Laserprodukt av klasse 1.  8A d v a r s a l Stirr ikke på strålen.  9 Dette er et “Klasse 1 LED produkt” Sikkerhet  10 Fare For Lyn nedslag Fare : Arbeid ikke på utstyr eller kabler i tordenvær.  11 Blokker Ikke Luftventilene  12 All strøm ...

  • Allied Telesis AT-FS202 - page 43

    AT-FS20x Series Installation Guide 35  13 Temperatura De Funcioname nto Este produto foi projetado para uma temperatura ambiente máxima de 40 graus centígrados.  14 Todos Os Países : In stale o produto de acord o com as normas nacionais e locais para instalações elétricas. Estándares : Este produc to cumple co n los siguientes es tánd ...

  • Allied Telesis AT-FS202 - page 44

    Translated Safety and Emission Information 36  5E l s ä k e r h e t TUV-EN60950, UL1950, CSA 950  6 Laser EN60825  7 Varning! Laserprodukt av klass 1.  8 Varning! Lasers trålning när en heten är öppen.  9 Detta är en “Klass 1 lysdiodprodukt” Säkerhet  10 Fara För Blixt nedslag Fara : Arbeta ej på utrustningen eller ka ...

Fabricant Allied Telesis Catégorie Switch

Les documents que nous recevons du fabricant de l'appareilAllied Telesis AT-FS202 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Allied Telesis
- manuels d’utilisations AT-FS202
- fiches produit Allied Telesis
- dépliants
- ou étiquettes-énergie Allied Telesis AT-FS202
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Allied Telesis AT-FS202.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Allied Telesis AT-FS202, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Allied Telesis AT-FS202. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Allied Telesis AT-FS202.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Allied Telesis AT-FS202, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Allied Telesis AT-FS202 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Allied Telesis AT-FS202.

Le manuel d’utilisation complet Allied Telesis, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Allied Telesis AT-FS202 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Allied Telesis AT-FS202, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lAllied Telesis AT-FS202 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Allied Telesis AT-FS202 - qui devraient nous aider dans les premières étapes lors de l'utilisation Allied Telesis AT-FS202
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Allied Telesis AT-FS202
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Allied Telesis AT-FS202 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Allied Telesis AT-FS202?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Allied Telesis AT-FS202, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Allied Telesis AT-FS202 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)