Français dropdown-ico

Manuel d’utilisation IBM 22P6415

62 pages 3.75 mb
Télécharger

Aller à la page of 62

Summary
  • IBM 22P6415 - page 1

    IB M ® Hig h R a t e Wi r e l e s s LAN G a t e w a y Us e r ’ s G u i d e  OP T IONS by I B M ...

  • IBM 22P6415 - page 2

    Note: Before using this information and the pr oduct it supports, be sure to r ead the IBM High Rate Wir eless LAN Gateway Safety and Warranty Information that comes with your option. The Safety and Warranty Information contains the following information, which is necessary to review befor e operating the device: v Safety information v Information ...

  • IBM 22P6415 - page 3

    Contents Preface ........................ v About this book ..................... v Registering your option .................. v Part 1: Product description ................ 1 - 1 Part 2: Configuration .................. 2 - 1 W eb-based interface ................... 2 - 1 Saving configurations .................. 2 - 3 Part 3: Setting up the wirele ...

  • IBM 22P6415 - page 4

    Connecting to other routers ................. 7 - 1 T r o u b l e s h o o t i n g .................... 7 - 2 Part 8: Notices .................... 8 - 1 iv IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide ...

  • IBM 22P6415 - page 5

    Preface About this book This User ’ s Guide contains instructions for installing and using the IBM ® High Rate W ireless LAN Gateway . The User ’ s Guide contains the product description and usage instructions. For information about the product warranty and help and service information, see the Safety and Warranty Information that comes with y ...

  • IBM 22P6415 - page 6

    vi IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide ...

  • IBM 22P6415 - page 7

    Part 1: Product description The IBM High Rate W ireless LAN Gateway provides small of fices and home offices (SOHO) an economical way to connect a small local ar ea network (LAN) to the Internet using an external DSL/Cable modem. W ith its built-in wireless access point, you can connect your IEEE 802.1 1b-compliant mobile computers or other clients ...

  • IBM 22P6415 - page 8

    v DMZ : The IBM High Rate W ireless LAN Gateway can support some special applications and Internet games. W ith DMZ, one designated computer is removed fr om behind the built-in firewall and exposed to the Internet. This speeds up Internet gaming and might be requir ed from special applications. v Access control (Packet filtering) : The IBM High Ra ...

  • IBM 22P6415 - page 9

    v One IBM High Rate W ireless LAN Gateway unit v One AC power supply v One power cord Note: In the event that your Gateway comes with two power cords, be sur e to use the one labeled for your country . One is labeled for use in the United States and Canada, and one is labeled for use in Japan. v One RJ-45 Ethernet cable v The IBM High Rate Wir eles ...

  • IBM 22P6415 - page 10

    1-4 IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide ...

  • IBM 22P6415 - page 11

    Part 2: Configuration The IBM High Rate W ireless LAN Gateway has a W eb-based setup utility . Note: It is not recommended that multiple users be logged into the W eb-based setup utility at the same time. Web-based interface The W eb-based setup utility has an easy-to-use graphical user interface (GUI). Note: Updated W eb browser softwar e can be d ...

  • IBM 22P6415 - page 12

    Note: All IBM High Rate W ireless LAN Gateways are factory-configur ed with ″ default ″ as the default Administrator name with no password needed. After login, the Language selection window opens. 5. Select your language by clicking the appropriate icon. The language home page opens. The following is a list of buttons and links displayed in the ...

  • IBM 22P6415 - page 13

    v Help : Displays related help information v Delete : Deletes an entry in the configuration table Saving configurations The configuration changes made through the W eb-based setup utility are automatically saved into the flash memory within 30 seconds after clicking Apply . For more information, see “ Part 5: Using tools for advanced configuratio ...

  • IBM 22P6415 - page 14

    2-4 IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide ...

  • IBM 22P6415 - page 15

    Part 3: Setting up the wireless access point in the IBM High Rate Wireless LAN Gateway The IBM High Rate W ireless LAN Gateway is a multifunctional device with an integrated IEEE 802.1 1b-compliant W iFi certified access point. Y ou can use it as a base station for your wireless network. Thr ough the following procedur e, you can turn on the wirele ...

  • IBM 22P6415 - page 16

    Channels are the spectrum range wher e your wir eless signals are transmitted. The clearer the channel, the better your network performance. Y ou can select the desired channel fr om the pull-down menu. W ired equivalency privacy (WEP) encrypts the packets sent by the wireless Gateway . The security settings can affect performance, and must be bala ...

  • IBM 22P6415 - page 17

    Wireless Settings - Advanced Request to send (R TS) Threshold: In some situations, not all clients in a WLAN are awar e of each other (hidden node problem). That can lead to dif fer ent WLAN clients transmitting to the Gateway at the same time, therefor e jamming both transmissions. R TS Threshold is a packet size above which the Gateway will expec ...

  • IBM 22P6415 - page 18

    Wireless Settings - MAC Control Setup After you enable the MAC access limit function, then you can determine the access mode. In IEEE 802.1 1b-compliant devices, the MAC address is a means of controlling network access. MAC addresses can be found in the package of the network interface card (NIC). The following is an example of a MAC addr ess: v 00 ...

  • IBM 22P6415 - page 19

    Block or Allow: Y ou can list specific MAC addresses to block or allow in this window . Blocking a specific MAC address will allow everyone else with the correct settings to access the LAN and the Gateway . Allowing a specific MAC address will allow only that MAC addr ess access to the LAN and Gateway as long as WEP and ESSID ar e correct. Wireless ...

  • IBM 22P6415 - page 20

    v Multicast Packets: 0 v Multicast Packets: 0 v Multicast Bytes: 0 v Multicast Bytes: 0 v W ireless T ransmit Error v W ireless Receive Error v Deferred T ransmissions: 0 v Packet FCS Errors: 0 v Retry Limit Exceed: 0 v Discards: No Buf fer: 0 v Single Retries: 0 v Discards: WEP Errors: 0 v Multiple Retries: 0 v Discards: W rong Sour ce Address: 0 ...

  • IBM 22P6415 - page 21

    – Retry Limit Exceed : The number of packets not transmitted doe to excessive retries – Single Retries : The number of packets successfully transmitted after exactly one retry – Multiple Retries : The number of packets successfully transmitted after more than one r etry – Discards: Wrong Source Address : The number of packets discarded due ...

  • IBM 22P6415 - page 22

    3-8 IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide ...

  • IBM 22P6415 - page 23

    Part 4: Setting up client computers for Internet access This section provides information on setting up client computers for Internet access. Client computer requirements Client computers can use Microsoft ® W indows ® products, Novell Netware, Linux, or Unix. System requirements Y our computer must have the following: v An Ethernet (10/100BASE-T ...

  • IBM 22P6415 - page 24

    5. Select Obtain an IP address automatically . 6. Click the DNS tab. 7. Select Disable DNS . 8. Save the changes, and then restart your computer . Y our computer will be able to access the Internet through the Gateway . Note: If you do not want to use DHCP service, you must manually configur e the IP addr ess of your computer . T o manually configu ...

  • IBM 22P6415 - page 25

    9. Add the IP addr ess of the server to the DNS Server Search Or der list. 10. Save the changes, and then restart your computer . Y our computer can access the Internet through the server . Setting up Windows 2000 Professional clients Before setting up a W indows 2000 Professional client, be sure that the TCP/IP protocol is installed with your Ethe ...

  • IBM 22P6415 - page 26

    6. Click Properties . 7. Click to check the Obtain an IP address automatically radio button. 8. Click to check the Obtain DNS server address automatically radio button. 9. Click OK . 10. Click OK again. 11 . Restart your computer . Y our computer is able to access the Internet through the server . Note: If you do not want to use DHCP service, you m ...

  • IBM 22P6415 - page 27

    7. Save the changes, and then restart your computer . Y our computer is able to access the Internet through the server . Setting up Windows NT 4.0 W orkstation clients Before setting up a W indows NT 4.0 W orkstation client, be sure that the TCP/IP pr otocol is installed with your Ethernet network card. See your W indows NT 4.0 W orkstation manual ...

  • IBM 22P6415 - page 28

    4-6 IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide ...

  • IBM 22P6415 - page 29

    Part 5: Using tools for advanced configuration This section provides instructions for using the advanced configuration tool in the W eb-based setup utility . Advanced configuration Click Advanced Configuration to display the Advanced Configuration table. DHCP configuration W ith dynamic host configuration protocol (DHCP), you can automatically conf ...

  • IBM 22P6415 - page 30

    v DHCP : The DHCP featur e can be enabled or disabled. v DHCP Start Address : This is the starting IP addr ess of the IP addr ess pool in the DHCP server . The default is 192.168.1.1 1. v DHCP End Address : This is the end address of the addr ess pool in the DHCP server . The default is 192.168.1.254. 2. Click Apply to complete the configuration of ...

  • IBM 22P6415 - page 31

    2. Click Add to add a new entry in the Fixed IP table. v IP Address : The specified IP addr ess for the client device. This IP address must be within the addr ess pool in the DHCP server . v MAC Address : The MAC address of the client device v Remark : The descriptions of the client device that needs the fixed IP address 3. Click Apply . A new entr ...

  • IBM 22P6415 - page 32

    2. Click Add to add a new entry in the Excluded IP table. v IP Address : Enter the specified IP addr ess. The IP addr ess must be within the address pool of the DHCP server . v Remark : The descriptions of the excluded IP addr ess 3. Click Apply . A new entry is added to the Excluded IP table. Note: The configuration changes made through the W eb-b ...

  • IBM 22P6415 - page 33

    2. Click Add to add a new entry in the BOOTP IP table. v IP Address : The specified address used by the BOOTP protocol. This IP address must be within the addr ess pool in the DHCP server . v MAC Address : The MAC address of the client device used for that IP address v Remark : The descriptions of the IP addr ess 3. Click Apply . A new entry is add ...

  • IBM 22P6415 - page 34

    v DMZ Host : In the blank field, type the IP addr ess of the computer you want to use for DMZ. Note: T urning on DMZ can cause potential security holes on your local network. The computer specified for DMZ is not protected by the built-in firewall. Firmware Upgrade The firmware upgrade function allows the user to easily upgrade the Gateway to the l ...

  • IBM 22P6415 - page 35

    2. Click Advanced Configuration , and then click Firmware Upgrade to display the Firmware Upgrade page. 3. Browse for the file you just downloaded. 4. Click the update button. 5. Follow the on-screen instructions. Note: If the firmware upgrade pr ocess is interrupted, you will need to use the FirstAid Utility to reflash the firmwar e. LAN configura ...

  • IBM 22P6415 - page 36

    In this table, you can change the TCP/IP settings of the Ethernet LAN interface of the Gateway . v MAC Address : Displays the media access control (MAC) addr ess of the LAN interface. It is displayed in six pairs of hexadecimal numbers. v LAN IP Address : This is the IP addr ess of the Gateway on the LAN/WLAN interface. Address 192.168.1.1 is the d ...

  • IBM 22P6415 - page 37

    Language select Click Advanced Configuration , and then click Language select to display the Language select page. Select English or Japanese in the Language pull-down menu. Selecting Default will display the language select page the next time you log into the IBM High Rate W ireless Gateway . MAC address clone This feature is used when an ISP is e ...

  • IBM 22P6415 - page 38

    Click Advanced Configuration → MAC address clone to display the MAC address clone page. Select one of the following: v Auto acquire from first connected PC. Make sur e the PC with the desired MAC address is the only PC connected to the Gateway . Then select auto acquire and click on Apply . v Manual configuration . Manually enter the desired MAC ...

  • IBM 22P6415 - page 39

    Y ou can enable or disable packet filtering by selecting Enable or Disable from the pull-down menu at the top of the table. Note: It is recommended that you select Enable and click on Apply before configuring any of the available packet filtering rules. There ar e three r ules to define packet filtering: IP r ule Port rule, and URL rule. IP rule T ...

  • IBM 22P6415 - page 40

    2. Click Add . 3. Enter the IP addr ess of the Internet site that the LAN users are pr ohibited from accessing. 4. Click Apply . The IP rule table has a new entry added to it. Repeat steps 3 and 4 to block more W eb sites using the IP rule. Note: The configuration changes made through the W eb-based setup utility are automatically saved into the fl ...

  • IBM 22P6415 - page 41

    2. Click Add to add an entry into the Port rule table. v Service T ype : TCP or UDP service v Protocol : Select the protocol (or application) such as FTP or HTTP . If a well-known protocol is selected fr om the list, then the corresponding port number is set according to various Internet standar ds. The Port Edit box is disabled. Click User-Defined ...

  • IBM 22P6415 - page 42

    1. Click URL Rule to display the URL rule table. 2. Click Allow or Block . This will permit you to either block the specified URL, or allow ONL Y the specified URL. 3. Enter the URLs of the Internet sites that you wish to control access for the LAN users. 5-14 IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide ...

  • IBM 22P6415 - page 43

    4. Click Apply at the bottom of the screen. Note: The configuration changes made through the W eb-based setup utility are automatically saved into the flash memory within 30 seconds after clicking Apply . Profile upload/download T o save a configuration profile for the IBM High Rate W ireless LAN Gateway , select Advanced Configuration → Profile ...

  • IBM 22P6415 - page 44

    destination and file name. T o restore a pr ofile, use the Browse button to find the name of the configuration file to be restor ed. Click the Upload button. T o download a file from the Gateway , click Download Config T extfile . The following dialog box is displayed: Click the Open button the work with the file in a text editor . Click Save to sa ...

  • IBM 22P6415 - page 45

    routers on your network and at least one of the r outers is connected to more than one network (or subnet). T o route TCP/IP , do the following: 1. Click Advanced Configuration → Static Routing T able to display the static routing table. 2. Click Add to add a new entry into the static routing table. v Network Address : The IP addr ess of the dest ...

  • IBM 22P6415 - page 46

    T o add a V irtual Server , do the following: 1. From the left-hand navigation bar , click Advanced Configuration → V irtual Server Configuration to display the V irtual Server table. Y ou can enable or disable the V irtual Server function by selecting Enable or Disable from the pull-down menu at the top of the table. Note: It is recommended that ...

  • IBM 22P6415 - page 47

    Click Apply to complete the configuration of your V irtual Server . Note: The configuration changes made through the W eb-based setup utility are automatically saved into the flash memory within 30 seconds after clicking Apply . Change password From the left-hand navigation bar , click Change password to display the Change password table. The Admin ...

  • IBM 22P6415 - page 48

    Reset factory defaults From the left-hand navigation bar , click Reset factory defaults to display the Reset to factory default page. Click the Reset factory defaults button. The following page is displayed. Click here to continue. 5-20 IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide ...

  • IBM 22P6415 - page 49

    Restart Wireless Gateway T o restart your Gateway , click Restart wireless gateway . The following dialog box is displayed. Click OK to restart the IBM High Rate W ireless Gateway . For information on the System information and the Help functions of the IBM High Rate W ireless LAN Gateway , see “ Part 6: System information and help ” on page 6- ...

  • IBM 22P6415 - page 50

    5-22 IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide ...

  • IBM 22P6415 - page 51

    Part 6: System information and help This section provides system information and information on the Help featur e of the IBM High Rate W ireless LAN Gateway . System Information T o display the system information table, click System Information . Click Refresh to read or r efresh the system status. The information displayed in this window includes ...

  • IBM 22P6415 - page 52

    – DHCP : Displays the status (enabled or disabled) of the DHCP and the range of IP addr esses controlled by the DHCP server v Internet-Broadband Status : – MAC Address : The Ethernet MAC address of the Internet-Br oadband interface of the Gateway , displayed in six hexadecimal numbers – IP Address : The IP addr ess of the Gateway as seen by e ...

  • IBM 22P6415 - page 53

    Part 6: System information and help 6-3 ...

  • IBM 22P6415 - page 54

    6-4 IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide ...

  • IBM 22P6415 - page 55

    Part 7: Tips and T roubleshooting Connecting to other routers The IBM High Rate W ireless LAN Gateway can be connected to another router in the following manner: 1. If the Gateway will connect to an upstream r outer , one which operates at a higher level in the network than your Gateway , connect a cable from one of the output ports of the router t ...

  • IBM 22P6415 - page 56

    v Connect the router with the DHCP service to a LAN port on the Gateway . Note: The Gateway configuration page is still available at the new LAN IP addr ess. Be certain the other router can accommodate the fixed IP addr ess of the Gateway . Note: The configuration changes made through the W eb-based setup utility are automatically saved into the fl ...

  • IBM 22P6415 - page 57

    After verifying that the LAN path works correctly , test the path from your computer to a remote device: 1. Connect your Gateway to the Internet with a DSL/Cable modem. 2. If you are using a W indows-based computer , click Start → Programs → Accessories → Command Prompt . 3. T ype PING 192.168.1.1 , followed by the IP address of a r emote dev ...

  • IBM 22P6415 - page 58

    7-4 IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide ...

  • IBM 22P6415 - page 59

    Part 8: Notices 1. Y ou are str ongly encouraged to download the latest drivers for your W ireless LAN clients (e.g. PC Card or USB devices) 2. Y ou must use Microsoft Internet Explor er 5.0 or later , or Netscape Navigator 4.0 or later , when accessing the W eb-based setup utility for the IBM High Rate W ireless LAN Gateway . Internet Explorer can ...

  • IBM 22P6415 - page 60

    8-2 IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide ...

  • IBM 22P6415 - page 61

    ...

  • IBM 22P6415 - page 62

     Part Number: 22P6415 Printed in the United States of America on recycled paper containing 10% recovered post-consumer fiber . (1P) P/N: 22P6415 ...

Fabricant IBM Catégorie Network Router

Les documents que nous recevons du fabricant de l'appareilIBM 22P6415 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques IBM
- manuels d’utilisations 22P6415
- fiches produit IBM
- dépliants
- ou étiquettes-énergie IBM 22P6415
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation IBM 22P6415.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation IBM 22P6415, manuels d’entretien, brefs manuels ou manuels de l’utilisateur IBM 22P6415. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit IBM 22P6415.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil IBM 22P6415, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser IBM 22P6415 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs IBM 22P6415.

Le manuel d’utilisation complet IBM, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel IBM 22P6415 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières IBM 22P6415, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lIBM 22P6415 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil IBM 22P6415 - qui devraient nous aider dans les premières étapes lors de l'utilisation IBM 22P6415
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de IBM 22P6415
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service IBM 22P6415 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de IBM 22P6415?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec IBM 22P6415, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec IBM 22P6415 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)