Français dropdown-ico

Manuel d’utilisation Snapper 2167517BV

32 pages 3.96 mb
Télécharger

Aller à la page of 32

Summary
  • Snapper 2167517BV - page 1

    Safety Instructions & Operator's Manual for 21" STEEL DECK WALK MOWERS SERIES 17 MODELS 2167517BV P2167517BV P2167517BVE WP216517B P215517HC MODEL NUMBER EXPLANATION I P I 21 SELF-PROPELLED CUTTING WIDTH ENGINE HORSE POWER I 675 I 1TI BIVIEI ENGINE OPTION ENGINE DESIGNATION SERIES DESIGNATION W - Model Designation P - Self Propelled M ...

  • Snapper 2167517BV - page 2

    IMPORTANT SAFETY INSTRUCTIONS WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instruc ...

  • Snapper 2167517BV - page 3

    IMPORTANT SAFETY INSTRUCTIONS OPERATION 1. DO NOT put hands or feet near or under rotating parts. Keep clear of discharge area while engine is running. 2. STOP engine when crossing gravel drives, walks, or roads, and under any conditions where thrown objects might be a hazard. 3. Mow only in daylight or good artificial light. 4. DO NOT operate mowe ...

  • Snapper 2167517BV - page 4

    TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ..................................................................... 2 & 3 TABLE OF CONTENTS ..................................................................................................... 4 SECTION 1 - FAMILIARIZATION ........................................................................ ...

  • Snapper 2167517BV - page 5

    Section 1 - FAMILIARIZATION ROPE START HANDLE GRASS BAG REAR HEIGHT ADJUSTMENT LATCH WHEEL DRIVE CONTROL GRASS BAG ADAPTER BLADE CONTROL GROUND SPEED CONTROL FUEL FILLER CAP BRIGGS ENGINE SPEED CONTROL FAST SLOW OIL FILL CAP AND DIPSTICK ENGINE PRIMER HONDA ENGINE SPEED CONTROL "CHOKE SLOW FIGURE 1.1 FRONT HEIGHT ADJUSTMENT LATCHES 1.1 INTRODU ...

  • Snapper 2167517BV - page 6

    Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the following checks and perform the service required before each start-up. 2.1.1. Check guards, deflectors, grass bag, adapter and covers to make sure all are in place and securely tightened. 2.1.2. Check blade control and wheel drive control to insure they work freely. See Figure 2. ...

  • Snapper 2167517BV - page 7

    Section 2 - OPERATING INSTRUCTIONS 2.2 STARTING & OPERATION 2.2.1. ENGINE & BLADE (Choke Models) 1. Move fuel shut off valve to the "ON" position. See Figure 2.5. NOTE: Stop the engine (and blade) by releasing the blade control. FIGURE 2.5 2. Move engine speed control to the "Choke" position. See Figure 2.6. 2.2.2. ENGIN ...

  • Snapper 2167517BV - page 8

    Section 2 - OPERATING INSTRUCTIONS 2.4 HANDLE HEIGHT ADJUSTMENT The height of the mower handle can be adjusted as follows: 1. Loosen the lower nuts on each lower handle as shown in Figure 2.8. LOWER HANDLE J/ // HIGHER LOWER LOOSEN LOWER NUTS ON EACH LOWER HANDLE FIGURE 2.8 2. Move upper mower handle up or down until the desired position is achieve ...

  • Snapper 2167517BV - page 9

    Section 2 - OPERATING INSTRUCTIONS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. 2.6 RECYCLING OPERATION NOTE: For be ...

  • Snapper 2167517BV - page 10

    Section 2 - OPERATING INSTRUCTIONS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. 2.9 INSTALLATION of GRASS BAG (Conti ...

  • Snapper 2167517BV - page 11

    Section 2 - OPERATING INSTRUCTIONS 2.12 INSTALLATION of DISCHARGE DEFLECTOR (Optional accessory on some models) Install discharge deflector if discharging is desired. Grass Bag and Bag Adapter or Recycling Cover must be removed. 1. Remove front and rear nuts that secure Bag Adapter or Recycling Cover to deck. Refer to sections concerning these part ...

  • Snapper 2167517BV - page 12

    Section 3- MAINTENANCE 3.1 INTRODUCTION To retain the quality of the mower, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention model and serial number. WARNING DO NOT attempt any maintenance, adjustments or service wi ...

  • Snapper 2167517BV - page 13

    Section 3- MAINTENANCE WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or worki ...

  • Snapper 2167517BV - page 14

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when han ...

  • Snapper 2167517BV - page 15

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. 4. Sharpen blade on a grinding whe ...

  • Snapper 2167517BV - page 16

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. 4.3 DRIVEN AND DRIVE DISC SERVICE ...

  • Snapper 2167517BV - page 17

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. 4.3.3. DRIVEN DISC ADJUSTMENT (Con ...

  • Snapper 2167517BV - page 18

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. 4.3.4. Replacing Rubber Driven Dis ...

  • Snapper 2167517BV - page 19

    Section 4 - REPAIR & ADJUSTMENTS _IL WARNING ,_ DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. 4.3.6. Replacement Of Beari ...

  • Snapper 2167517BV - page 20

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. SLOT IN END OF DRIVE DISC BOLT PUL ...

  • Snapper 2167517BV - page 21

    Section 4 - REPAIR & ADJUSTMENTS 4,5, BATTERY SERVICE 4.5.1. NEW BATTERY PREPARATION 1. Remove battery from carton. 2. Place battery in a well ventilated area on a level non-concrete surface. 3. Remove battery cell caps. Fill cells as required with electrolyte (purchased separately) to proper level. Fill to 3/16" above cell plates. Filling ...

  • Snapper 2167517BV - page 22

    PROBLEM Engine Will Not Start Using Recoil Starter Engine Stalls or Stops After Running Engine Loses Power Excessive Vibration Mower Will Not Move Loss Of Traction (Self-Propelled Models) Cutting Grass Improperly Poor Grass Discharge Oil Leaking TROUBLESHOOTING 1• 2• 3• 4. 2• 3. 4. 5. 6. 1 2• 3. 1 2. 3• 4• PROBABLE CAUSE Fuel tank emp ...

  • Snapper 2167517BV - page 23

    SERVICE SCHEDULE ITEM Engine Oil SERVICE PERFORMED REF. Check Oil Level Page 6 EACH 5 25 USE HRS HRS X 50 HR8 100 HR8 Initial Oil Change Page 12 X Periodic Oil Change Page 13 X* Air Pre-Cleaner Air Cleaner Spark Plug Clean Sponge Element Clean or Replace Replace Engine Manual & Page 11 Engine Manual & Page 11 Engine Manual X Engine Cooling ...

  • Snapper 2167517BV - page 24

    3 YEAR LIMITED WARRANTY For three (3) years from purchase date for the original purchaser's residential, non-commercial use, SNAPPER, through any authorized SNAPPER dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon examination by the factory at McDonough, Georgia, to be defective in material ...

  • Snapper 2167517BV - page 25

    PRIMARY MAINTENANCE ® an illustration of how dirt can [e & how maintenance can protect it! Snapper uses the best avail- able engines and components n In their products in order to 4; provide long, satisfactory service. However, proper care is essential In _" prolonging engine life. Dirt Is your engine's enemy number 11 The engine on ...

  • Snapper 2167517BV - page 26

    PRIMARY MAINTENANCE gulp about 12,000 gallons of air for used. Because of its working environ- ment, the air available to your Snapper engine Is " heavily saturated with air- borne dirt particles. g that dirt will quickly ruin an engine, manufacturers equip their engines with extremely efficient air cleaners to filter out the harmful dirt. As ...

  • Snapper 2167517BV - page 27

    PRIMARY MAINTENANCE Generally, wash foam-type filters In a dlshwashlng detergent and water solution. Rinse and wring dry, then saturate with oil and squeeze out excess. Failure to re-oil this type filter will ruin the engine. Clean paper elements by tapping lightly. Blowing with air will rupture paper elements. Use a flashlight to detect clogged or ...

  • Snapper 2167517BV - page 28

    PRIMARY MAINTENANCE On 4-cyle engines with an oil level plug, don't be fooled into thinking the engine has sufficient lubricating oii if you can see "some" oil in the opening - the level should always be brought up to the point of overflowing at the top of the fill hole. I On 2-cycle engines, lubrication must be provided by an exact ...

  • Snapper 2167517BV - page 29

    SNAPPER PRODUCT REGISTRATION FORM IMPORTANT: KEEP THIS INFORMATION FOR YOUR PERSONAL RECORDS (Complete the following information on your Snapper purchase) Model Number Serial Number Date of Purchase Retailer Retailer's Phone Number It is very important that you register your purchase with Snapper to ensure warranty coverage. Please mail your p ...

  • Snapper 2167517BV - page 30

    NOTES 30 ...

  • Snapper 2167517BV - page 31

    NOTES 31 ...

  • Snapper 2167517BV - page 32

    Safety Instructions & Operator's Manual for 21" STEEL DECK WALK BEHIND MOWERS SERIES 17 IMPORTANT Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety warnings. Read, Unde ...

Fabricant Snapper Catégorie Lawn Mower

Les documents que nous recevons du fabricant de l'appareilSnapper 2167517BV peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Snapper
- manuels d’utilisations 2167517BV
- fiches produit Snapper
- dépliants
- ou étiquettes-énergie Snapper 2167517BV
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Snapper 2167517BV.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Snapper 2167517BV, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Snapper 2167517BV. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Snapper 2167517BV.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Snapper 2167517BV, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Snapper 2167517BV par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Snapper 2167517BV.

Le manuel d’utilisation complet Snapper, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Snapper 2167517BV - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Snapper 2167517BV, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lSnapper 2167517BV qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Snapper 2167517BV - qui devraient nous aider dans les premières étapes lors de l'utilisation Snapper 2167517BV
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Snapper 2167517BV
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Snapper 2167517BV dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Snapper 2167517BV?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Snapper 2167517BV, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Snapper 2167517BV il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)