Manuel d’utilisation Cannon CANTFS-03-NG

24 pages 0.33 mb
Télécharger

Aller à la page of 24

Summary
  • Cannon CANTFS-03-NG - page 1

    C annon This heater is approved for use with Natural and Propane gases. Please leave instructions with the owner USER INSTRUCTIONS INST ALLA TION INSTRUCTIONS SERVICE INSTRUCTIONS FREEST ANDING MODELS CANTFS-03-NG CANTFS-03-LP Part No: F2902 Revision (C) - 2008 Cannon CANTERBUR Y ...

  • Cannon CANTFS-03-NG - page 2

    2 Contents Contents 2 W arranty 3 ❍ Distributor Safety warnings 4-5 ❍ What to do if you smell gas ❍ W ar nings ❍ Standards User instructions 6-8 ❍ Operating instructions ❍ Flame characteristics ❍ Cleaning Heater specifications 9 Installation instructions 10-15 ❍ Clearances ❍ Installation ❍ Gas connection ❍ Log installation ❍ ...

  • Cannon CANTFS-03-NG - page 3

    3 The Cannon appliance is warranted against defects in materials and work- manship for a period of one, (1) year from its date of original purchase, for residential use in Australia. W arranty ser vice, which includes par ts and labour for the replacement or repair of defective parts, is available through the CANNON distributor . (Details below or ...

  • Cannon CANTFS-03-NG - page 4

    4 Please read this manual before installing and using the heater . What to do if you smell gas 1. T urn OFF the main gas supply . 2. Extinguish any open flame. 3. Open windows. 4. Do not touch electrical switches. 5. Do not use your telephone. 6. Call your gas supplier immediately from a neighbour’ s phone. W arnings 1. Improper installation, adj ...

  • Cannon CANTFS-03-NG - page 5

    5 7. Do not spray aerosols in the vicinity of this appliance while it is in operation. Do not place articles on or against this appliance. Do not use or store flammable materials near this appliance. 8. This heater is not intended for use in a marine environment. 9. If removed, the glass window must be put back onto the unit prior to operating the ...

  • Cannon CANTFS-03-NG - page 6

    6 Operating instructions 1. Plug the power cord into the wall socket and turn on the power to the heater , see figure 1. Use of an extension cord is not recommended. 2. For control lay-out refer to figure 2 3. T o tur n heater on press switch to POWER ON position. There is a 5 second delay before the burner ignites. At this setting the burner is on ...

  • Cannon CANTFS-03-NG - page 7

    7 5. T o increase the fan speed to MED, press switch for MED setting. Refer figure 5. 6. T o increase the fan speed to HIGH, press switch for HIGH setting. Refer figure 6. 7. T o turn the burner to LOW setting, press switch for LOW setting. Refer figure 7. On low burner setting it is more efficient to operate the fan speed on LOW . 8. If the burner ...

  • Cannon CANTFS-03-NG - page 8

    8 Flame characteristics The heater flame should be stable, no lifting from the burner and the logs should glow after approximately 15 minutes operation on HIGH setting. The heater is a fuel effect unit and is designed to operate with luminous flames and may exhibit slight carbon deposits on the logs. If there is any excess carbon build-up on the lo ...

  • Cannon CANTFS-03-NG - page 9

    9 Gas type: Natural or Propane gas, as indicated on data label. Gas consumption: 26 M J/hr input. Energy output: 21.45 MJ/hr (5.96 kW). Energy star rating: 4 stars. Heater type: Approved to AS4553/AG 103. Operating pressure: Natural gas: 0.75 kPa. (at the burner) Propane gas: 2.65 kPa. Gas regulator: Integral part of controller . Min. inlet pressur ...

  • Cannon CANTFS-03-NG - page 10

    10 Overall dimensions: Refer fig. 8. 1. This appliance is to be installed by a licensed ser vice person only . 2. This appliance shall be installed in accordance with the manufacturer’ s installation instructions, local gas fitting regulations, municipal building codes, electrical wiring regulations, and AS5601 the Australian Stand- ard for gas i ...

  • Cannon CANTFS-03-NG - page 11

    11 Gas connection 10. Connect incoming gas supply pipe to 1 / 2 ” compression fitting at rear of appliance. For inlet position see figure 13. Log installation 11. The burner is contained within the burner chamber . Refer figure 14. 12. Carefully unpack the log set. Logs are numbered as follows: No 1 - Left front log No 2 - left back log No 3 - Ri ...

  • Cannon CANTFS-03-NG - page 12

    12 Position the four individually numbered logs in the following order on the burner head as shown in figures 15 - 18. The male locating pins in the burner head must engage with corresponding holes in the indi- vidual logs. a) Place log No.1 onto the 2 front left pins on the burner head, ensuring that the charring faces the front. Refer figure 15. ...

  • Cannon CANTFS-03-NG - page 13

    12 Position the four individually numbered logs in the following order on the burner head as shown in figures 15 - 18. The male locating pins in the burner head must engage with corresponding holes in the indi- vidual logs. a) Place log No.1 onto the 2 front left pins on the burner head, ensuring that the charring faces the front. Refer figure 15. ...

  • Cannon CANTFS-03-NG - page 14

    11 Gas connection 10. Connect incoming gas supply pipe to 1 / 2 ” compression fitting at rear of appliance. For inlet position see figure 13. Log installation 11. The burner is contained within the burner chamber . Refer figure 14. 12. Carefully unpack the log set. Logs are numbered as follows: No 1 - Left front log No 2 - left back log No 3 - Ri ...

  • Cannon CANTFS-03-NG - page 15

    10 Overall dimensions: Refer fig. 8. 1. This appliance is to be installed by a licensed ser vice person only . 2. This appliance shall be installed in accordance with the manufacturer’ s installation instructions, local gas fitting regulations, municipal building codes, electrical wiring regulations, and AS5601 the Australian Stand- ard for gas i ...

  • Cannon CANTFS-03-NG - page 16

    9 Gas type: Natural or Propane gas, as indicated on data label. Gas consumption: 26 M J/hr input. Energy output: 21.45 MJ/hr (5.96 kW). Energy star rating: 4 stars. Heater type: Approved to AS4553/AG 103. Operating pressure: Natural gas: 0.75 kPa. (at the burner) Propane gas: 2.65 kPa. Gas regulator: Integral part of controller . Min. inlet pressur ...

  • Cannon CANTFS-03-NG - page 17

    8 Flame characteristics The heater flame should be stable, no lifting from the burner and the logs should glow after approximately 15 minutes operation on HIGH setting. The heater is a fuel effect unit and is designed to operate with luminous flames and may exhibit slight carbon deposits on the logs. If there is any excess carbon build-up on the lo ...

  • Cannon CANTFS-03-NG - page 18

    7 5. T o increase the fan speed to MED, press switch for MED setting. Refer figure 5. 6. T o increase the fan speed to HIGH, press switch for HIGH setting. Refer figure 6. 7. T o turn the burner to LOW setting, press switch for LOW setting. Refer figure 7. On low burner setting it is more efficient to operate the fan speed on LOW . 8. If the burner ...

  • Cannon CANTFS-03-NG - page 19

    6 Operating instructions 1. Plug the power cord into the wall socket and turn on the power to the heater , see figure 1. Use of an extension cord is not recommended. 2. For control lay-out refer to figure 2 3. T o tur n heater on press switch to POWER ON position. There is a 5 second delay before the burner ignites. At this setting the burner is on ...

  • Cannon CANTFS-03-NG - page 20

    5 7. Do not spray aerosols in the vicinity of this appliance while it is in operation. Do not place articles on or against this appliance. Do not use or store flammable materials near this appliance. 8. This heater is not intended for use in a marine environment. 9. If removed, the glass window must be put back onto the unit prior to operating the ...

  • Cannon CANTFS-03-NG - page 21

    4 Please read this manual before installing and using the heater . What to do if you smell gas 1. T urn OFF the main gas supply . 2. Extinguish any open flame. 3. Open windows. 4. Do not touch electrical switches. 5. Do not use your telephone. 6. Call your gas supplier immediately from a neighbour’ s phone. W arnings 1. Improper installation, adj ...

  • Cannon CANTFS-03-NG - page 22

    3 The Cannon appliance is warranted against defects in materials and work- manship for a period of one, (1) year from its date of original purchase, for residential use in Australia. W arranty ser vice, which includes par ts and labour for the replacement or repair of defective parts, is available through the CANNON distributor . (Details below or ...

  • Cannon CANTFS-03-NG - page 23

    2 Contents Contents 2 W arranty 3 ❍ Distributor Safety warnings 4-5 ❍ What to do if you smell gas ❍ W ar nings ❍ Standards User instructions 6-8 ❍ Operating instructions ❍ Flame characteristics ❍ Cleaning Heater specifications 9 Installation instructions 10-15 ❍ Clearances ❍ Installation ❍ Gas connection ❍ Log installation ❍ ...

  • Cannon CANTFS-03-NG - page 24

    C annon This heater is approved for use with Natural and Propane gases. Please leave instructions with the owner USER INSTRUCTIONS INST ALLA TION INSTRUCTIONS SERVICE INSTRUCTIONS FREEST ANDING MODELS CANTFS-03-NG CANTFS-03-LP Part No: F2902 Revision (C) - 2008 Cannon CANTERBUR Y ...

Fabricant Cannon Catégorie Gas Heater

Les documents que nous recevons du fabricant de l'appareilCannon CANTFS-03-NG peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Cannon
- manuels d’utilisations CANTFS-03-NG
- fiches produit Cannon
- dépliants
- ou étiquettes-énergie Cannon CANTFS-03-NG
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Cannon CANTFS-03-NG.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Cannon CANTFS-03-NG, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Cannon CANTFS-03-NG. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Cannon CANTFS-03-NG.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Cannon CANTFS-03-NG, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Cannon CANTFS-03-NG par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Cannon CANTFS-03-NG.

Le manuel d’utilisation complet Cannon, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Cannon CANTFS-03-NG - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Cannon CANTFS-03-NG, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lCannon CANTFS-03-NG qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Cannon CANTFS-03-NG - qui devraient nous aider dans les premières étapes lors de l'utilisation Cannon CANTFS-03-NG
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Cannon CANTFS-03-NG
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Cannon CANTFS-03-NG dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Cannon CANTFS-03-NG?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Cannon CANTFS-03-NG, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Cannon CANTFS-03-NG il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)