-
Moffat GSC 5061 - page 1
GAS COOKER GSC 5061 GB ...
-
Moffat GSC 5061 - page 2
2 ...
-
Moffat GSC 5061 - page 3
3 CONTENTS Instructions for the user Inst ructions for the installer Important Safety Information Description of the appliance Technical Features Using the appliance - Using the oven - Hints & Tips - Using the Grill - Using the Hob Maintenance and Cleaning Something Not Working Service & Spare Parts Customer Care Guarantee conditions 4 5 6 ...
-
Moffat GSC 5061 - page 4
4 IMPORTANT SAFETY INFORMATION Installation • This cooker must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards. • This cooker is heavy. Take care when moving it. • Any gas installation must be carried out by a registered CORGI installer. • Remove all packaging before ...
-
Moffat GSC 5061 - page 5
5 DESCRIPTION OF THE APPLIANCE Contr ol panel Oven door wi th glass Handl e do or Ad just able small f eet Hob 2 1 3 4 2000W 2000W 1000W 2600W semi -rapi d semi -rapi d aux iliar y rapid 1. Front left burner (semi-rapid) 2. Back left burner (semi-rapid) 3. Back right burner (auxiliary) 4. Front right burner (rapid) Control panel Model : GSC 5061 W ...
-
Moffat GSC 5061 - page 6
6 TECHNICAL FEATURES Free standing Class 1 Hob Pan support Front right Back right Front left Back left Enamelled Rapid Auxiliary Semi rapid Semi rapid 2,60kW 1,00kW 2,00kW 2,00kW Oven Oven Oven power Grill Grill power Gas 3,20kW Gas 2,50kW Accessories Oven grid Roasting tray Roasting grid Protective screen Chromed Enamelled Chromed Enamelled Dimens ...
-
Moffat GSC 5061 - page 7
7 USING THE APPLIANCE Before the First Use of the Cooker Remove all packaging both inside and outside of the cooker, before using it. Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is quite normal. 1. Remove the oven accessories and ensure all packaging has been removed. 2. Ignit ...
-
Moffat GSC 5061 - page 8
8 Ignition Attention: when turning on the oven and grill burner the oven door has to be opened. • Open the ov en door and lift the small lid on the bottom of the cavity , push and turn the control knob to the left to position 9, keeping the control knob pressed. • At the same time, push the electronic ignition knob (see fig). Keep it pushed unt ...
-
Moffat GSC 5061 - page 9
9 Hints and Tips Condensation and steam When food is heated it produces steam in the same way as a boiling kettle. The oven vents allow some of this steam to escape. However, alw ays stand back from the ov en w hen opening the oven door to allow any build up of steam or heat to release. If the steam comes into contact with a cool surface on the out ...
-
Moffat GSC 5061 - page 10
10 Using the Grill When using the grill it has to be supervised, the oven door opened the protective screen “A” in its place. Heat comes from the top of the oven. It is suitable for grilling meat (beef bacon, pork bacon …) that remains tender, for toast or to brown already cooked. Grill burner ignition Attention: when turning on the oven and ...
-
Moffat GSC 5061 - page 11
11 Heat comes from the top of the oven. It is suitable for grilling meat (beef bacon, pork bacon …) that remains tender, for toast or to brown already cooked dishes. Grilling meat When using the grill it has to be supervised, the oven door opened the protective screen “A” in its place. Attention: when turning on the oven and grill burner the ...
-
Moffat GSC 5061 - page 12
12 OR Lack of pow er • Push the corresponding knob in completely and turn it le f t t o th e sy m bo l “ l ar ge fl a me ” simbol and ignite with a match. • Release the knob and watch that the burner has ignited. Upon ignition, adjust the flame as required. • If for any reason the flame should extinguish turn off the relevant control knob ...
-
Moffat GSC 5061 - page 13
13 MAINTENANCE AND CLEANING The oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire, especially in the grill pan. Before cleaning, ensure all control knobs are in the OFF position, and the appliance has cooled completely . Before any maintenance or cleaning can be carried out, you must DISCONNECT th ...
-
Moffat GSC 5061 - page 14
14 DO NOT clean the oven door while the glass panels are warm. If this precaution is not observed the glass panel may shatter. If the door glass panel becomes chipped or has deep scratches, the glass will be weakened and must be replaced to prevent the possibility of the panel shattering. Contact your local Service Centre who will be pleased to adv ...
-
Moffat GSC 5061 - page 15
15 SOMETHING NOT WORKING If the appliance is not working correctly, please carry out the f ollowing checks, before contacting your local Service Force Service Centre. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge w ill be made even if the appliance is under gua ...
-
Moffat GSC 5061 - page 16
16 SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning:- 08705 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centr ...
-
Moffat GSC 5061 - page 17
17 GUARANTEE CONDITIONS Standard Guarantee Conditions We Moffat undertake that if, within 12 months of t he date of the purchase, this Moffat appliance or any part thereof is proved to be defective by any reason onl y of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for labour, materials or c ...
-
Moffat GSC 5061 - page 18
18 INSTRUCTIONS FOR THE INSTALLER SAFETY ADVICE • Before installation ensure that the local distribution conditions (gas type and pressure) and the pre-setting of the appliance are consistent. • This appliance must be installed only in a room with good ventilation. • This appliance must not connected to a flu. It has to be installed and conne ...
-
Moffat GSC 5061 - page 19
19 TECHNICAL DATA Table no.1 (Cat : II 2H3+ ) Cons Burner Normal power (kW) Economic power (kW) By- pass (mm) Gas Type Pressure (mbar) Nozzle diameter (mm) m 3 /h g/h RAPID 2.60 0.72 0.42 Natural Gas Butane Propane 20 mbar 28-30mbar 37mbar 1.12 0,86 0,86 0.248 188,8 SEMI- RAPID 2.00 0.43 0.32 Natural Gas Butane Propane 20 mbar 28-30mbar 37mbar 0.96 ...
-
Moffat GSC 5061 - page 20
20 Ventilation The room containing the cooker should have an air supply in accordance with B.S. 5440: Part 2: Current Editions. The following requirements for ventilation must be met. The cooker should not be installed in a bed sitting room with a volume of less than 20m 3 , if it is installed in a room of volume less 5m 3 an air vent of effective ...
-
Moffat GSC 5061 - page 21
21 GAS CONNECTIONS Your cooker is delivered adjusted for the kind of gas stated on the rating plate If the appliance is supplied with natural gas and the pressure for natural gas is 20mbar. The following methods of connection to the gas supply must be used: Right Hand Connection (from front) Ensure that the rubber hose is not in contact with any pa ...
-
Moffat GSC 5061 - page 22
22 The appliance flexible connector should not be subjected to undue forces either in normal use or whilst connected or disconnected; - The socket which the plug of the appliance flexible connector fits should be permanently attached to a firmly fixed gas installation pipe and positioned such that the appliance flexible connector hose hangs freely ...
-
Moffat GSC 5061 - page 23
23 Electrical connection Important In any connection way the appliance has to be grounded, in accordance with the national rules in force. We decline any responsibility in case of accidents due to no grounding or w rong grounding. Fuse capacity: 5 A Note: Check on the rating plate the value for the total connection power for establishing the fuse p ...
-
Moffat GSC 5061 - page 24
24 CONVERSION OF GAS Your cooker is designed to work with natural gas, and is convertible for use with propane or butane. The LPG conversion kit is available from your Service Force Centre and must be fitted by a Corgi Registered engineer. For changing the gas type it is necessary to: • replace the nozzles (hob, oven and grill); • adjust the mi ...
-
Moffat GSC 5061 - page 25
25 Table no.2 Air adjusting (mm) Gas type Oven Grill G20 2,5 25,5 G30 3,5 24 G31 3,5 24 Replace the nozzles of the oven burners Oven burner To replace the gas oven nozzle, follow this procedure: • Check the table no.1 for diameter of nozzle; • Remove the oven removable base panel; • Remove the screw on the oven burner rod at the rear of the o ...
-
Moffat GSC 5061 - page 26
26 Adjustment of minimum level Oven burner • Remove the top pan support as well as the burner caps and the burner crowns. • Unscrew and remove the 2 top plate fixing screws and remove the top plate. • Light the burner knob on position 9 and leave the oven door closed for about 10 min. • Turn the knob slowly to position 1. • Pull off the k ...
-
Moffat GSC 5061 - page 27
. ...
Avez-vous une question à propos de Moffat GSC 5061?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Moffat GSC 5061, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Moffat GSC 5061 il est probable qu’il a envie de partager la façon de le résoudre.