Français dropdown-ico

Manuel d’utilisation Transcend Information TS-ABX31

44 pages 0.41 mb
Télécharger

Aller à la page of 44

Summary
  • Transcend Information TS-ABX31 - page 1

    TS-ABX31 Intel Socket 370 Celeron Series USER / S MANUAL Your Supplier, Your Partner, Your Friend. Transcend ...

  • Transcend Information TS-ABX31 - page 2

    User / s Notice This User / s Manual is designed to assist system manufacturers or end users to set up and install the motherboard. All information within this document has been carefully checked. However , T ranscend Information, Inc. (hereinafter re- ferred to as “T ranscend”) carries no responsibility on liability to any error or inaccuracy ...

  • Transcend Information TS-ABX31 - page 3

    T able of Contents CHAPTER 1 INTRODUCTION 1 1.1 Package Contents ............................................................................................................ 1 1.2 Specifications and Features ........................................................................................... 1 CHAPTER 2 HARDW ARE INST ALLA TION 3 2.1 T ransc ...

  • Transcend Information TS-ABX31 - page 4

    CHAPTER 3 BIOS SETUP 16 3.1 BIOS Setup ....................................................................................................................... 16 3.2 The Main Menu ................................................................................................................ 16 3.3 Standard CMOS Setup .............................. ...

  • Transcend Information TS-ABX31 - page 5

    INTRODUCTION 1 CHAPTER 1 INTRODUCTION 1.1 Package Contents This motherboard package contains the following items. If you discover any damaged or missing items, please contact your retailer . 1 - TS-ABX31 motherboard 2 - CD-ROM 3 - One FDD cable, one IDE cable 4 - User ’s Manual 1.2 Specifications and Features • • • • • CPU - Support Int ...

  • Transcend Information TS-ABX31 - page 6

    INTRODUCTION 2 - Support PS/2 mouse and PS/2 keyboard - Support IrDA port - Support 2 Universal Serial Bus Ports • Award BIOS - Support Plug-and-Play - Support ACPI, DMI, Green Feature • W ake Up Features - PS/2 mouse and keyboard W ake Up - Support W ake-on-LAN function - Remote Ring W ake Up • PCB Dimensions - A TX form factor , 4-layer PCB ...

  • Transcend Information TS-ABX31 - page 7

    HARDW ARE INST ALLA TION 3 CHAPTER 2 HARDW ARE INST ALLA TION 2.1 T ranscend TS-ABX31 Motherboard *T :T op **B:Bottom 2 IDE Connectors 3 DIMM Sockets I t l 440BX ATX Power Connector 66/100MHz 4 PCI Slots 2 ISA Slots AGP Port Multi I/O Chip BIOS Walk On LAN * T:PS/2 Mouse **B:PS/2 Keyboard * T:USB1 **B:USB2 **B:COMB **B:COMA *T:Parallel (Printer) Fl ...

  • Transcend Information TS-ABX31 - page 8

    HARDW ARE INST ALLA TION 4 2.2 Layout of T ranscend TS-ABX31 Motherboard DIMM1 (64bit or ECC 168pin SDRAM Module) DIMM2 (64bit or ECC168pin SDRAM Module) DIMM2 (64bit or ECC 168pin SDRAM Module) 0 l X et C onnector Primary IDE Connector Secondary IDE Connector POWER-FAN C ONN PGA 370 JP2 66/100MHz Tra n PCI Slot1 ( PCI Slot4 ( PCI Slot2 ( PCI Slot3 ...

  • Transcend Information TS-ABX31 - page 9

    HARDW ARE INST ALLA TION 5 TS-ABX31 Transcend DIMM1 (64/72bit 168pin SDRAM Module) DIMM2 (64/72bit 168pin SDRAM Module) DIMM2 (64/72bit 168pin SDRAM Module) COM1 AGP PCI Slot1 (PCI1) PCI Slot4 (PCI4) PCI Slot2 (PCI2) PCI Slot3 (PCI3) ISA Slot1 (ISA1) ISA Slot2 (ISA2) Intel 443ZX AGP Set Intel PIIX4 ChipSet CR2032 3V Lithium Cell Primary IDE Connect ...

  • Transcend Information TS-ABX31 - page 10

    2.4 66/100MHz System Configuration The jumper 2 (JP2) allows you to set FSB (Front Side Bus) to be 66 or 100MHz configuration. When you set FSB to 66MHz, you can select the system bus frequency from 66MHz to 83.3MHz through “ CPU Host Clock (CPU/PCI) ” of “ Chipset Features Setup ” in BIOS (Please refer to page 26). When you set FSB to 100M ...

  • Transcend Information TS-ABX31 - page 11

    HARDW ARE INST ALLA TION 7 TS-ABX31 CPU Freq.-Ra Transcend DIMM1 (64/72bit 168pin SDRAM Module) DIMM2 (64/72bit 168pin SDRAM Module) DIMM2 (64/72bit 168pin SDRAM Module) COM1 Printer Parallel AGP PCI Slot1 (PCI1) PCI Slot4 (PCI4) PCI Slot2 (PCI2) PCI Slot3 (PCI3) ISA Slot1 (ISA1) ISA Slot2 (ISA2) Intel 443ZX AGP Set Intel PIIX4 ChipSet CR2032 3V Li ...

  • Transcend Information TS-ABX31 - page 12

    HARDW ARE INST ALLA TION 8 2.6 Memory Configuration This motherboard must be installed with DIMM (Dual Inline Memory Module). The DIMMs must be 3.3 V olt synchronous DRAM modules. It also supports ECC (Error Checking and Correct- ing). IMPORT ANT : Memory speed setup is required through “ Auto Configuration “ in BIOS Chipset Features Setup. Ins ...

  • Transcend Information TS-ABX31 - page 13

    9 HARDW ARE INST ALLA TION 2.7 Keyboard W ake Up (3-pin KB-A WK ) This function disables or enables you to use the keyboard to power up the system. Set this jumper to “ Enable ” if you wish to use your keyboard to power up your computer . 2.8 Primary / Secondary IDE Connectors (T wo 40-pin IDE) This motherboard supports two 40-pin IDE connector ...

  • Transcend Information TS-ABX31 - page 14

    HARDW ARE INST ALLA TION 10 2.9 Floppy Disk Drive Connector (34-pin FDC) This connector supports the provided floppy disk drive ribbon cable. After connecting the single end to the board, connect the two plugs on the other end to the floppy drives. 2.10 Fan Power Connectors There are three fan power connectors on the motherboard: CPU _F AN, POWER_F ...

  • Transcend Information TS-ABX31 - page 15

    1 1 HARDW ARE INST ALLA TION 2.1 1 W ake-on-LAN Connector (3-pin WOL) This connector connects to LAN cards with a W ake-on-LAN output. The system can be powered up when a wakeup packet or signal is received from the LAN card. NOTE:This function requires that the W ake-on-LAN Power Up Control is set to “ En- abled ” and that your system has an A ...

  • Transcend Information TS-ABX31 - page 16

    HARDW ARE INST ALLA TION 12 2.13 Panel Connectors Power LED Lead (3-pin KEYLOCK) This 3-pin connector attaches to the power LED. Pin1 : +5V Pin2 : NC Pin3 : GN D Keylock Lead (2-pin KEYLOCK) Use the keylock to enable or disable the keyboard. Pin4 : KEYLOCK Pin5 : GN D Speaker Lead (4-pin SPEAKER) This 4-pin connector connects to the case-mounted sp ...

  • Transcend Information TS-ABX31 - page 17

    13 HARDW ARE INST ALLA TION Software Power-Off Lead (2-pin SOFT_OFF) Attach the SOFT_OFF Switch of the panel to this connector . Pin19 & Pin20 TS-ABX31 Pa n Transcend DIMM1 (64/72bit 168pin SDRAM Module) DIMM2 (64/72bit 168pin SDRAM Module) DIMM2 (64/72bit 168pin SDRAM Module) COM1 Printer Parallel Port AGP PCI Slot1 (PCI1) PCI Slot4 (PCI4) PCI ...

  • Transcend Information TS-ABX31 - page 18

    HARDW ARE INST ALLA TION 14 1. PS/2 Mouse 2. PS/2 Keyboard 3. USB1 3. USB2 4. 5. C TS-ABX31 Exte r Parallel Port (Printer) C OMB 5. COMA rnal Connectors 2.15 External Connectors There are 5 kinds of external connectors on the motherboard. 1. PS/2 Mouse Connector (6-pin MOUSE) The onboard PS/2 mouse connector is a 6-pin Mini-Din connector marked “ ...

  • Transcend Information TS-ABX31 - page 19

    15 HARDW ARE INST ALLA TION 2.16 Clear CMOS Jumper (3-pin JP4) T o clear the CMOS data, you should turn of f your computer power and short the pin1 and pin2 of JP4. TS-ABX31 Clea r Transcend DIMM1 (64/72bit 168pin SDRAM Module) DIMM2 (64/72bit 168pin SDRAM Module) DIMM2 (64/72bit 168pin SDRAM Module) COM1 Printer Parallel Port AGP PCI Slot1 (PCI1) ...

  • Transcend Information TS-ABX31 - page 20

    BIOS SETUP 16 CHAPTER 3 BIOS SETUP 3.1 BIOS Setup Award BIOS has a built-in Setup program that allows users to modify the basic system configu- ration. This information is stored in CMOS RAM. So it can retain the Setup information when the power is turned off. When the battery of CMOS fails, it will cause the data lost. When it happens, you should ...

  • Transcend Information TS-ABX31 - page 21

    17 BIOS SETUP F 1 General help, only for Status Page Setup Menu and Option Page Setup Menu F 2 Change color from total 16 colors F 2 to select color forward Shift + F2 to select color backward F 3 Calendar , only for Status Page Setup Menu F 5 Restore the previous CMOS value from CMOS, only for Option Page Setup Menu F 6 Load the default CMOS RAM v ...

  • Transcend Information TS-ABX31 - page 22

    BIOS SETUP 18 3.3 Standard CMOS Setup • SUPERVISOR / USER P ASSWORD Change, set, or disable a password. In some BIOS versions that allow separate user and supervisor passwords, only the supervisor password permits access to Setup. The user pass- word generally allows only power-on access. • IDE HDD AUTO DETECTION Automatically detect and config ...

  • Transcend Information TS-ABX31 - page 23

    19 BIOS SETUP 1. Match the specifications of your installed IDE hard drive(s) with the preprogrammed values for drive type 1 through 45. 2. Select “ USER ” and enter values into each drive parameter field. 3. Use the “ IDE HDD AUTO DETECTION ” function in Main Menu. Here are the brief explanations of drive specifications. * TYPE : The BIOS ...

  • Transcend Information TS-ABX31 - page 24

    BIOS SETUP 20 • Drive A / Drive B Select the correct specifications for the diskette drive(s) installed in the computer . - None : No diskette drive installed - 360K, 5.25 in : 5-1/4 inch PC-type standard drive; 360 kilobyte capacity - 1.2M, 5.25 in : 5-1/4 inch A T-type high-density drive; 1.2 megabyte capacity - 720K, 3.5 in : 3-1/2 inch double ...

  • Transcend Information TS-ABX31 - page 25

    21 BIOS SETUP 3.4 BIOS Features Setup This “ BIOS FEA TURES SETUP ” option allows you to improve your system performance and set up system features according to your preference. • Virus W arning When the function is enabled, you will receive a warning message if a program (specifically , a virus) attempts to write to the boot sector or the pa ...

  • Transcend Information TS-ABX31 - page 26

    BIOS SETUP 22 • CPU L2 Cache ECC Checking Select “ Enabled ” to make sure the data accuracy . • Quick Power On Self T est Select “ Enabled ” to reduce the amount of time required to run the Power-On Self-T est (POST). A quick POST skips certain steps. We recommend that you normally disable quick POST . It ’ s better to find a problem ...

  • Transcend Information TS-ABX31 - page 27

    23 BIOS SETUP • T ypematic Rate (Chars / Sec) When the typematic rate setting is enabled, you can select a typematic rate (the rate at which character repeats) when you hold down a key of 6, 8, 10,12, 15, 20, 24 or 30 characters per second. • T ypematic Delay (Msec) When the typematic delay setting is enabled, you can select a typematic delay ( ...

  • Transcend Information TS-ABX31 - page 28

    BIOS SETUP 24 each section of memory separately . Many system designers hardwire shadowing of the sys- tem BIOS and eliminate a System BIOS Shadow option. Video BIOS shadows into memory area C0000-C7FFF . The remaining areas shown on the “ BIOS Features Setup ” screen may be occupied by other expansion card firmware. If an expansion peripheral ...

  • Transcend Information TS-ABX31 - page 29

    25 BIOS SETUP • SDRAM RAS-to-CAS Delay This controls the latency between SDRAM active command and the read/write command. Leave on default setting. • SDRAM RAS Precharge Time This controls the idle clocks after issuing a precharge command to SDRAM. Leave on de- fault setting. • SDRAM CAS Latency Time This controls the SDRAM performance, defau ...

  • Transcend Information TS-ABX31 - page 30

    BIOS SETUP 26 • Memory Hold At 15M-16M Enabling this feature reserves memory address space from 15MB to 16MB to ISA expan- sion cards that specifically require this setting. This makes the memory from 15MB and up unavailable to the system. Expansion cards can only access memory up to 16MB. The de- fault is “ Disabled ” . • Passive Release I ...

  • Transcend Information TS-ABX31 - page 31

    27 BIOS SETUP 3.6 Power Management Setup The Power Management Setup allows you to configure your system to save energy most effec- tively while operating in a manner consistent with your own style of computer use. • ACPI function This item allows you to enable/disable the Advanced Configuration and Power Management (ACPI). The choice: Enabled, Di ...

  • Transcend Information TS-ABX31 - page 32

    BIOS SETUP 28 3. Max. Power Saving : Maximum power management mode. Inactivity period is defined as below . Doze Mode = 1 min. Standby Mode = 1 min. Suspend Mode = 1 min. HDD Power Down = 1 min. 4. User Defined : Allow you to set each mode individually . Select time-out period for each mode shown above. • PM Control by APM When enabled, an Advanc ...

  • Transcend Information TS-ABX31 - page 33

    29 BIOS SETUP • Standby Mode After the selected period of system inactivity (1 minute to 1 hour), the fixed disk drive and the video shut off while all other devices still operate at full speed. • Suspend Mode After the selected period of system inactivity (1 minute to 1 hour), all devices except the CPU shut off. • HDD Power Down After the s ...

  • Transcend Information TS-ABX31 - page 34

    BIOS SETUP 30 Primary IDE 0 Primary IDE 1 Secondary IDE0 Secondary IDE1 Floppy Disk Serial Port Parallel port IRQ[3-7, 9-15], NMI T o enable or disable the detection of IRQ 3-7, IRQ 9-15 or NMI inter- rupt events for powering down state transition. These items enable or disable the detection of IDE, floppy , serial and parallel port activities for ...

  • Transcend Information TS-ABX31 - page 35

    31 BIOS SETUP • Resource Controlled by The Award Plug and Play BIOS can automatically configure all the boot and Plug and Play(PnP) compatible devices. If you select “ Auto ” , all the interrupt request (IRQ) and DMA assignment fields disappear , as the BIOS automatically assigns them. The choice: Auto and Manual. • Reset Configuration Data ...

  • Transcend Information TS-ABX31 - page 36

    BIOS SETUP 32 3.8 Integrated Peripherals This option will load the default BIOS values. Choose the option and the following message appears. • • • • • IDE HDD Block Mode The item means HDD access uses over one cycle method for improving HDD performance. If the HDD supports this function, choose ” Enabled ” . • IDE Primary/Secondary ...

  • Transcend Information TS-ABX31 - page 37

    33 BIOS SETUP • • • • • On Chip IDE Primary / Secondary PCI IDE The chipset contains a PCI IDE interface which supports two IDE channels. Select “ Enabled ” to activate the first and/or second IDE interface. Select “ Disabled ” to deactivate an interface, if you install a primary and/or secondary add-in IDE interface. • • • ...

  • Transcend Information TS-ABX31 - page 38

    BIOS SETUP 34 • • • • • Onboard Serial Port 1 Select an address and the corresponding interrupt for each of the first and second serial ports. The Choice: 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto. • • • • • Onboard Serial Port 2 The second serial port shares resources (address and IRQ) with IrDA. • • • • ? ...

  • Transcend Information TS-ABX31 - page 39

    35 BIOS SETUP 3.9 Supervisor Password This option will set the password to prevent others from making changes to your system. Password prevents unauthorized use of your computer . If you set a password, the system prompts for the correct password before you boot or access to “ Setup ” T o set a password: 1. At the prompt, type your password. Y ...

  • Transcend Information TS-ABX31 - page 40

    BIOS SETUP 36 3.10 User Password This option will set the password to prevent others from making changes to your system when accessed by POWER ON. This operation is same as SUPERVISOR P ASSWORD. 3.1 1 IDE HDD Auto Detection Use the BIOS utility to detect the HDD type automatically . Press “ Y ” to accept, “ N ” to reject, and “ ESC ” to ...

  • Transcend Information TS-ABX31 - page 41

    37 BIOS SETUP 3.13 Exit Without Saving Abort the current change and exit the BIOS utility . 3.12 Save & Exit Setup Save the setting and exit the BIOS utility . ...

  • Transcend Information TS-ABX31 - page 42

    BIOS SETUP 38 3.14 Load BIOS Defaults NOTE: This option allows you to load the troubleshooting default values permanently stored in the BIOS ROM. These default settings are non-optimal and disable all high performance features. 3.15 Load Setup Defaults This option allows you to load the default values to the system configuration fields. These defau ...

  • Transcend Information TS-ABX31 - page 43

    39 BIOS UPGRADE 4.1 How to Check Y our BIOS File Name and V ersion Please turn on PC first, the screen will display as follows : TRANSCEND MODULAR BIOS : ABX3A-V10 BIOS Version 1.0 (V11 f BIOS File Name ABX3A - V 1 0 ( You can upgrade to n e than this version.) (Make sure the first 5 c version, if you want to u 4.2 Download Correct BIOS File from W ...

  • Transcend Information TS-ABX31 - page 44

    BIOS UPDA TE 40 Step 2: Make a System Disk - Put a clean 3.5" disk in Drive A MS-DOS : Key in FORMA T A:/S and press [Enter]. Windows O/S : Select the icon of [My Computer] Click [3.5" Floppy (A:)] Select [File/Format] from Command Bar Under Format 3.5 Floppy (A:) Menu select Format type = Full item and Other Options = Copy system files C ...

Fabricant Transcend Information Catégorie Computer Hardware

Les documents que nous recevons du fabricant de l'appareilTranscend Information TS-ABX31 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Transcend Information
- manuels d’utilisations TS-ABX31
- fiches produit Transcend Information
- dépliants
- ou étiquettes-énergie Transcend Information TS-ABX31
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Transcend Information TS-ABX31.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Transcend Information TS-ABX31, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Transcend Information TS-ABX31. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Transcend Information TS-ABX31.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Transcend Information TS-ABX31, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Transcend Information TS-ABX31 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Transcend Information TS-ABX31.

Le manuel d’utilisation complet Transcend Information, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Transcend Information TS-ABX31 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Transcend Information TS-ABX31, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lTranscend Information TS-ABX31 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Transcend Information TS-ABX31 - qui devraient nous aider dans les premières étapes lors de l'utilisation Transcend Information TS-ABX31
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Transcend Information TS-ABX31
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Transcend Information TS-ABX31 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Transcend Information TS-ABX31?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Transcend Information TS-ABX31, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Transcend Information TS-ABX31 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)