Français dropdown-ico

Manuel d’utilisation EverFocus EN-7519C

46 pages 4.02 mb
Télécharger

Aller à la page of 46

Summary
  • EverFocus EN-7519C - page 1

    Instruction Manual EN-7517C / EN-7519C 17” / 19” PREMIUM TFT-LCD MONITOR ...

  • EverFocus EN-7519C - page 2

    Please read this manual thoroughly before use, and keep i t handy for future reference. ...

  • EverFocus EN-7519C - page 3

    SAFETY INSTRUCTION ………………………………………………………………….. 2 ~ 3 CAUTIONS ………………………………………………………………............... ........... 4 FCC RF INTERFERENCE STATEM ENT …………………………….... ....................... 5 CONNECTING WITH EXTERNAL EQUIPMENT …… ...

  • EverFocus EN-7519C - page 4

    INSTRUCTION MANUAL …………………………………………… ………………………. 1 Import ant Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instruct ions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation opening ...

  • EverFocus EN-7519C - page 5

    receptacles and the point where they ex it from the apparatus. 1 1. Only use attachment/accessories specified by the manufacturer . 12. Use only with the cart, s tand, tripod, bracket or t able specified by th e manufacturer or sold with the apparatus. When a cart is used, use cauti on when moving the cart/apparatus combination to avoid injury from ...

  • EverFocus EN-7519C - page 6

    This symbol is intended to alert the user to the presence of uninsulated : dangerous voltage with in the product’s enclos ure that may be of sufficient magnitude to constitute a risk of ele ctric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance(serv icing) instructions in the liter ...

  • EverFocus EN-7519C - page 7

     NEVER REMOVE THE BA CK COVER Removal of the back cov er should be carried out only by qual ified personnel.  DO NOT USE IN HOSTILE ENVIRONMENTS To prevent shock or fire hazard, do not expose the unit to rain or moist u re. This unit is designed to be used in the offic e or home. Do not subject the unit to vibratio ns, dust of corrosive gases ...

  • EverFocus EN-7519C - page 8

    This equipment has been tested and fou nd to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferenc e in a residential installation. This equipment generates, uses a nd can radiate radio frequency energy and, if not installed a ...

  • EverFocus EN-7519C - page 9

    A. BOTTOM PANEL CONTROL 1. HDMI IN 2. DVI IN 3. VGA(D-SUB) IN 4. PC STEREO IN 5. AUDIO OUT(Speaker) 6. COMPONENT Y,Pb,Pr & SOUND L,R IN 7. DC 12V IN 8. TRIGGER INPUT B. SIDE PANEL CONTROL 1. VIDEO1(AV1) IN 2. VIDEO1(AV1) OU T 3. VIDEO2(AV2) IN 4. VIDEO2(AV2) OU T 5. S-VIDEO(Y/C) IN 6. S-VIDEO(Y/C) OUT 7. AV1 & S-VIDEO AUDIO IN 8. AV1 & ...

  • EverFocus EN-7519C - page 10

    6 …………………………………… ………………………………. INSTRUCTION MANUAL C. REMOTE CONTROLLER (Option) 1. POWER( ) Turn the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or vid eo(AV1/AV2/S-Video/Comp onent/HDMI/DVI/PC) sources. 3. AUTO Auto geome try ad jus tment in ...

  • EverFocus EN-7519C - page 11

    Select AV mode .(AV1, AV2 & S-VIDEO). 24. COMP Select CO MPONENT mod e. INSTRUCTION MANUAL …………………………………………… ………………………. 7 D. FRONT KEY CONTROL 1 / 2.  VOL  Adjus t the volum e and menu setti ngs. 3 / 4. ▲ / ▼ These buttons allow user to enter the sub-menu of the activated function. T ...

  • EverFocus EN-7519C - page 12

    9. POWER LED The power LED lights with green when the power is turned ON. The power is t urned off by press ing the power switch again and the power LED goes Re d. 8 …………………………………… ………………………………. INSTRUCTION MANUAL OSD MENU DESCRIPTION A: CUSTOM MENU (Only Video Input) 1) Press the MENU button and ...

  • EverFocus EN-7519C - page 13

    Tint: Increase or decrease the tint of the picture. Sharpness: Increase or decrease the sharpness of the pi cture. A: CUSTOM MENU (For HDMI, DV I & PC Input) 1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Custom. 2) Press the up( ▲ ) or down( ▼ ) button to select the sub menu. 3) Press the left(◀ ...

  • EverFocus EN-7519C - page 14

    1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to sel ect the Picture / Sound. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down ( ▼ ) button to select the Picture Mode. 4) Press the right( ▶ ) or SOURCE/SELECT button. 5) Press the up( ▲ ) or down ( ▼ ) button to select the Pictur ...

  • EverFocus EN-7519C - page 15

    4) Press the MENU button to save. 10 ……………………………………………… ……………………. INSTRUCTION MANUAL 3. Mute 1) Press the up( ▲ ) or down( ▼ ) button to select the Mute. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU b ...

  • EverFocus EN-7519C - page 16

    1) Press the up( ▲ ) or dow n( ▼ ) button to select the Volume 2) Press the left (◀) or right( ▶ ) button to adjust Volume s etting. 3) Press the MENU button to save. INSTRUCTION MANUAL ………………………………………………… …………………. 11 5. Size ...

  • EverFocus EN-7519C - page 17

    1) Press the up( ▲ ) or dow n( ▼ ) button to select the Size 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or dow n( ▼ ) button to select the Size option. 4) Press the MENU button to save. 6. NR 1) Press the up( ▲ ) or dow n( ▼ ) button to select the NR. 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press ...

  • EverFocus EN-7519C - page 18

    7. 3D Comb 1) Press the up( ▲ ) or down( ▼ ) button to select the 3D Comb. 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. B. Picture / Sound Menu (F or HDMI, DV I & PC Input) 1. Picture Mode 1) Press the MENU button and then press the ...

  • EverFocus EN-7519C - page 19

    4) Press the right( ▶ ) or SOURCE/SELECT button. 5) Press the up( ▲ ) or down ( ▼ ) button to select the Picture Mode option. 6) Press the MENU button to save. INSTRUCTION MANUAL ………………………………………………… …………………. 13 2-1. Color Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the Color ...

  • EverFocus EN-7519C - page 20

    3) Press the left( ▶) or SOURCE/SELECT button again. 4) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone opti on. 5) Press the MENU button to save. 14 ……………………………………………… ……………………. INSTRUCTION MANUAL 2-2. Color Tone (Custom) ...

  • EverFocus EN-7519C - page 21

    1) Press the up( ▲ ) or down( ▼ ) button to select the Custom in the Col or Tone. 2) Press the Menu button to save. 3) Press the up( ▲ ) or down( ▼ ) button to select the Red(R), Green(G) or Blue(B). 4) Press the left(◀) or right( ▶) button to adjust color dens ity. 5) Press the MENU button to save. ...

  • EverFocus EN-7519C - page 22

    INSTRUCTION MANUAL ………………………………………………… …………………. 15 3. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size. 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option. 4. PC control (Only PC Input ) 1) Press the up( ▲ ...

  • EverFocus EN-7519C - page 23

    4) Press the right( ▶ ) or SOURCE /SELECT button. 5) Press the left (◀) or right( ▶ ) button to adjust the PC setting. 6) Press the MENU button to save. Auto Adjust: Auto geometry adjustment. Phase: Adjust the number of horizontal picture elements. H-Position: Mov e image horizontally on screen right or left. V-Position: Move image vertically ...

  • EverFocus EN-7519C - page 24

    1) Press the right( ▶ ) or SOURCE/SELECT button. 2) Press up( ▲ ) or down( ▼ ) button to sel ect the On or Off. 3) Press the MENU button to save. INSTRUCTION MANUAL ………………………………………………… …………………. 17 2. Input Source ...

  • EverFocus EN-7519C - page 25

    1) Press the up( ▲ ) or down( ▼ ) button to select the Input Source. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Source option. 4) Press the MENU button to save. 3. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size. 2) Press the right( ▶ ) or SOURCE/SELECT bu ...

  • EverFocus EN-7519C - page 26

    18 ……………………………………………… ……………………. INSTRUCTION MANUAL 4. Position 1) Press the up( ▲ ) or down( ▼ ) button to select the Position. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Position option. 4) Press the MENU button to save. 5. Sw ...

  • EverFocus EN-7519C - page 27

    1) Press the up( ▲ ) or down( ▼ ) button to select the Swap. 2) Press the right( ▶ ) or SOURCE/SELECT button to swap the main image for the sub one. INSTRUCTION MANUAL ………………………………………………… …………………. 19 5. Sound Select 1) Press the up( ▲ ) or down( ▼ ) button to select the Sound Select. 2) ...

  • EverFocus EN-7519C - page 28

    C. PIP MENU (For HD MI, DVI & PC Input) 1. Input Source 1) Press the up( ▲ ) or down( ▼ ) button to select the Input Source. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Input Source option. 4) Press the MENU button to save. 20 …………………………………………? ...

  • EverFocus EN-7519C - page 29

    1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Setup. 1. Reset 1) Press the right( ▶ ) or SOURCE /SELECT button 2) Press the right( ▶ ) or SOURCE /SELECT button again. 3) Press SOURCE/SEL ECT button to execute t he reset. Reset : All settings go to the factory initialization. INSTRUCTION MANUAL ……? ...

  • EverFocus EN-7519C - page 30

    2. Language 1) Press the up( ▲ ) or down( ▼ ) button to select the Language. 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select language. 4) Press the MENU button to save. 3. OSD Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the OSD Tone. 2) Press the right() or SOURCE/SELECT ...

  • EverFocus EN-7519C - page 31

    4. Blue Screen 1) Press the up( ▲ ) or down( ▼ ) button to select the Blue Screen. 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. 5. Key Lock 1) Press the up( ▲ ) or down( ▼ ) button to select the Key Lock. 2) Press the right() or SO ...

  • EverFocus EN-7519C - page 32

    INSTRUCTION MANUAL ………………………………………………… …………………. 23 6. Trigger 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger. 2) Press the right() or SOURCE/SELECT button. 6-1. Trigger Enable 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Enable. 2) Press the right() ...

  • EverFocus EN-7519C - page 33

    24 ……………………………………………… ……………………. INSTRUCTION MANUAL 6-2. Trigger Input 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input . 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input option. 4) Press the Menu butto ...

  • EverFocus EN-7519C - page 34

    INSTRUCTION MANUAL ………………………………………………… …………………. 25 6-4. Trigger Time 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Time. 2) Press left() or right() button to adjust Trigger Time setting. 3) Press the MENU button to save. 6-5 Trigger Option 1) Press the up( ▲ ) or down( ...

  • EverFocus EN-7519C - page 35

     N/C (Normal Closed): W h en Trigger cable is opened, Trigger function is activated. N/O (Normal Opened): When Trigger cable is closed, Trigger function is activated. High: When Trigger signal is high(2~5 [V]), Trigger function is activated. Low: When Trigger signal is low(0~0.6[V]), Trigger function is activated. 26 ………………………? ...

  • EverFocus EN-7519C - page 36

    The Type of I mage 2 : Component, H DMI, DVI or PC. INSTRUCTION MANUAL ………………………………………………… …………………. 27 7. Auto switching 1) Press the up( ▲ ) or down( ▼ ) button to select the Auto switching. 2) Press the right() or SOURCE/SELECT button. 7-1. Auto switching On/Off ...

  • EverFocus EN-7519C - page 37

    1) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off . 4) Press the Menu button to save. 28 ……………………………………………… ……………………. INSTRUCTION MANUAL 7-2. Auto switching Inputs en abled ...

  • EverFocus EN-7519C - page 38

    1) Press the up( ▲ )or d own( ▼ ) button to select the Inputs enabled. 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Input. 4) Press the right() or SOURCE/SELECT button. 1) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 2) Press the Menu button to save. INSTRUC ...

  • EverFocus EN-7519C - page 39

    1) Press the up( ▲ ) or down( ▼ ) button to select the Time. 2) Press the left() or right() button to adjust the Time setting. 3) Press the MENU button to save. 30 ……………………………………………… ……………………. INSTRUCTION MANUAL ...

  • EverFocus EN-7519C - page 40

    Using the VESA standard wal l mount design and the 100mm hole pattern on the back panel to in stall the L CD moni tor to the wall . Wall-mount Installation (Option) 1. The Monitor fixing bracket to the monit or using the fixing screws provided. 2. The monitor fixing bracket asse mbled with monitor INSTRUCTION MANUAL …………………………? ...

  • EverFocus EN-7519C - page 41

    ▶ PIN ASSIGNMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETE CT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(fo r DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL (for DDC) 8 BLUE G ROUND ▶ ACCESSORIES 1. Power cord 2. Power adaptor (Bu ilt-in) 3. User’s manual 4. P C cabl e 5. Trigger ca ble (Option) 6 ...

  • EverFocus EN-7519C - page 42

    32 ……………………………………………… ……………………. INSTRUCTION MANUAL This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The display power manag ement signaling) from a VESA DPMS video card. The VESA DPMS-complian t video card performs this signaling s ystem through not ...

  • EverFocus EN-7519C - page 43

    INSTRUCTION MANUAL ………………………………………………… …………………. 33 17 ” 19 ” 17 ˝ Diagonal AM-TFT(Active-Matrix) 19 ˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm) : 0.264(H) x 0.264(V) Pixel pitch(mm) : 0.294(H) x 0.294(V) BRIGHTNESS: 300cd/ ㎡ (Typi cal) B RIGHT NESS: 300cd/ ㎡ (Typical) CONTRAST RATIO ...

  • EverFocus EN-7519C - page 44

    Gross Weigh t : 8. 19Kg (18. 06 lbs )) Gr oss W eight : 8.94K g (19. 71 l bs) ELECTRICAL RATINGS DC 12V/ 3.0A DC 12V/ 3.5A ▶▶ NOTE : Technical specifications are subject to change without notice. 34 ……………………………………………… ……………………. INSTRUCTION MANUAL WEEE Symbols ...

  • EverFocus EN-7519C - page 45

    INSTRUCTION MANUAL ………………………………………………… …………………. 35 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Un ion and other European countries with separate collection systems) This marking sho wn on the product or its literature , indicates th at ...

  • EverFocus EN-7519C - page 46

    Taiwan - Headquarter Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan Tel: +886-2-26982334 Fax: +886-2-26982380 China - Beijing Offic e Room 609,Technology Trade Building. Shangdi Information Industry Base, Haidian D istrict,Beijing China Tel: +86-10-62971096 Fax: +86-10-62971423 Europe - Ger many Of fice Albert-Einstein- S trasse ...

Fabricant EverFocus Catégorie Computer Monitor

Les documents que nous recevons du fabricant de l'appareilEverFocus EN-7519C peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques EverFocus
- manuels d’utilisations EN-7519C
- fiches produit EverFocus
- dépliants
- ou étiquettes-énergie EverFocus EN-7519C
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation EverFocus EN-7519C.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation EverFocus EN-7519C, manuels d’entretien, brefs manuels ou manuels de l’utilisateur EverFocus EN-7519C. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit EverFocus EN-7519C.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil EverFocus EN-7519C, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser EverFocus EN-7519C par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs EverFocus EN-7519C.

Le manuel d’utilisation complet EverFocus, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel EverFocus EN-7519C - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières EverFocus EN-7519C, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lEverFocus EN-7519C qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil EverFocus EN-7519C - qui devraient nous aider dans les premières étapes lors de l'utilisation EverFocus EN-7519C
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de EverFocus EN-7519C
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service EverFocus EN-7519C dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de EverFocus EN-7519C?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec EverFocus EN-7519C, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec EverFocus EN-7519C il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)