Français dropdown-ico

Manuel d’utilisation Cisco Systems 1503

48 pages 0.26 mb
Télécharger

Aller à la page of 48

Summary
  • Cisco Systems 1503 - page 1

    CHAPTER Using Your Hu b Software 3-1 3 Using Y our Hub Softw are This chapter describes procedures for conf ig uring the Ci sco Micro Hu b, and contains the following sections: • Preparing for Configuration • Configuring the Hub • Command Summary Preparing f or Configuration T o configure an y Cisco Micro Hubs in a st ack, the stack must incl ...

  • Cisco Systems 1503 - page 2

    Preparing for Configuration Cisco Micro Hub User Guide 3-2 Connection Using T elnet If the hub is correctly connect ed to a network, you can access the hub by using T elnet from anywhere on that network and can use the configuration program to communicate with th e hub . Before making a T elnet connection to the hub, you must configure the hub with ...

  • Cisco Systems 1503 - page 3

    Using Your Hu b Software 3-3 Command Conventions Command Con ventions This section describes some things you might need to know before using the commands to configure the hub . If you are familiar with th ese con ventions, you can skip this section. • Enter commands by typing the text of the command at the configuration prompt and then pressing t ...

  • Cisco Systems 1503 - page 4

    Preparing for Configuration Cisco Micro Hub User Guide 3-4 • Y ou can abbreviate commands to the fe west letters that make them unique. For example, for the show history command, you can enter: Hub> show his • Certain commands display multip le screens with this prompt between screens: --More-- Press the space bar to see more ou tput from th ...

  • Cisco Systems 1503 - page 5

    Using Your Hu b Software 3-5 Forgot Your Password? The <password> f ield can contain from 0 to 80 uppercase and lo wercase alphanumeric characters. Spaces are not allo wed. The f irst character cannot be a number . P asswords are case sensiti ve. An example of a v alid password is mypassword1 . F orgot Y our P assw ord? If you forget the pass ...

  • Cisco Systems 1503 - page 6

    Configuring the Hub Cisco Micro Hub User Guide 3-6 Step 7 The follo wing message appears, confirmi ng that your new passwords ha ve been accepted: Administrator and telnet passwords are modified. Welcome to Cisco hub model 150x Configuring the Hub This section describes basic hub configuration. Before you configure a Micro Hub 1503, have the follo ...

  • Cisco Systems 1503 - page 7

    Using Your Hu b Software 3-7 Hub ID Numbers Here are two rules that determine hub ID numbers in a stack of hubs: 1 The lowest hub ID number in a stack (1) is always assigned to the hub with another hub connected to its OUT port and with no hub connected to its IN port. 2 The highest hub ID number in a stack (any number from 2 to 5) is alw ays assig ...

  • Cisco Systems 1503 - page 8

    Configuring the Hub Cisco Micro Hub User Guide 3-8 Configuring the hub takes place in three major steps: 1 Entering Admi nistrator Mode 2 Configuring IP and SNMP Parameters 3 Configuring the SNMP Manageme nt Station All of the commands used in the conf igura tion steps are fully explained in the section “Command Summary” lat er in this chapter ...

  • Cisco Systems 1503 - page 9

    Using Your Hu b Software 3-9 Configuring IP and SNMP Parameters Configuring IP and SNMP P arameters The illustration below sho ws the network that is being configured in this section: Figure 3-2 Example Network Note The network addresses used in the steps be lo w are examples only; they will not work for your network. Y ou should substitute them wi ...

  • Cisco Systems 1503 - page 10

    Configuring the Hub Cisco Micro Hub User Guide 3-10 Step 3 Use the ip trap-manager command to configure the IP address of the SNMP management station: Hub# ip trap-manager 1 172.16.20.2 Basic IP and SNMP configuration is no w complete. T o return to guest mode, enter exit . Enter exit a second time to close the current terminal session: Hub# exit H ...

  • Cisco Systems 1503 - page 11

    Using Your Hub Software 3-11 Command Summary Command Summary This section provides a summary of the commands used to configure the Micro Hub 1503. The configuration commands are orga nized into the follo wing categories: • System Help Commands • User Interface Commands • Firmware Load and Restart Commands • System Information Commands • M ...

  • Cisco Systems 1503 - page 12

    Command Summary Cisco Micro Hub User Guide 3-12 Commands are def ined and described in the format sho wn below: show hub inf ormation Syntax: show hub inf ormation [ hub id ] Mode: Guest Description: Displays information about one or more hubs in a stack. Command Keyw ord Definition • hub id — (Optional) The number of the hub in the stack. An i ...

  • Cisco Systems 1503 - page 13

    Using Your Hub Software 3-13 System Help Commands System Help Commands Use the commands in this section to obtai n system help when configuring the hub . help ? Syntax: help Mode: Guest Description: Lists a brief description of the context-sensiti ve help system. Syntax: ? Mode: Guest Description: Use this command in the following w ays: • At any ...

  • Cisco Systems 1503 - page 14

    Command Summary Cisco Micro Hub User Guide 3-14 User Interf ace Commands Use the commands in this section to conf i gure the user interface for the hub software. Command Mode Access Commands Use the commands in this section to change conf iguration mode for the hub : disabl e enab le Syntax: disable Mode: Guest Description: Exits administrator mode ...

  • Cisco Systems 1503 - page 15

    Using Your Hub Software 3-15 User Interface Comma nds ex i t help Console Access Co mmands Use the commands in this section to cont rol console access to the hub configuration. show console lock out inf o Syntax: exit Mode: Guest Description: Exits any command mode or closes an ac tiv e terminal session. Syntax: help Mode: Guest Description: Refer ...

  • Cisco Systems 1503 - page 16

    Command Summary Cisco Micro Hub User Guide 3-16 console-loc kout no console loc kout console-loc kout time Syntax: console-lockout Mode: Administrator Description: Sets t he console acce ss to locked af ter a designated period of no keyboard acti vity . Syntax: no console-lockout Mode: Administrator Description: Disables the console locko ut featur ...

  • Cisco Systems 1503 - page 17

    Using Your Hub Software 3-17 User Interface Comma nds Administrator P assw ord Commands Use the commands in this section to configure hub passwords. pass word no pass word Syntax: password Mode: Administrator Description: Configures the password u sed to enter administrator mode. After entering the command, you will be prompted to enter the current ...

  • Cisco Systems 1503 - page 18

    Command Summary Cisco Micro Hub User Guide 3-18 telnet-session pass word no telnet-session pass word telnet-session Syntax: telnet-session password Mode: Administrator Description: Configures the hub with the password that is required to start a T elnet session with the hub . Syntax: no telnet-session password Mode: Administrator Description: Clear ...

  • Cisco Systems 1503 - page 19

    Using Your Hub Software 3-19 User Interface Comma nds Histor y Commands Use these commands in this section to config ure how the hub stores and displays command input history . show history term inal histor y term inal no histor y Syntax: show history Mode: Guest Description: Displays the commands that are stored in the history buf fer . Syntax: te ...

  • Cisco Systems 1503 - page 20

    Command Summary Cisco Micro Hub User Guide 3-20 term inal histor y size Editing Commands Use the commands in this section to c onf igure the hub for terminal editing. Note Command-line editing features are descr ibed in the appendix “T erminal Editing Command Reference. ” term inal editing term inal no editing Syntax: terminal history size < ...

  • Cisco Systems 1503 - page 21

    Using Your Hub Software 3-21 Firmware Load and Restart Commands Fir mware Load and Restar t Commands Use the commands in this section to conf i gure how the hub loads and copies f irmware. Bootup Option Commands Use the commands in this section to configure ho w the hub gets the firmware and IP address when it is first po wered up. bootup-option no ...

  • Cisco Systems 1503 - page 22

    Command Summary Cisco Micro Hub User Guide 3-22 TFTP Download Commands Use the commands in this section to conf i gure how the hub do wnloads firmware from a TFTP server . Use a server that has been conf igured to provide the firmware for your hu b . show tftp-do wnload info r mation tftp-download Syntax: show tftp-do wnload information Mode: Guest ...

  • Cisco Systems 1503 - page 23

    Using Your Hub Software 3-23 Firmware Load and Restart Commands star t tftp-download Xmodem Download Command Use this command to download f irmware to the hub with the X modem protocol. star t xmodem-download Syntax: start tftp-download Mode: Administrator Description: Starts the firmware do wnload process. In order to use this command, the hub and ...

  • Cisco Systems 1503 - page 24

    Command Summary Cisco Micro Hub User Guide 3-24 Restar t Command Use this command to reset the hub. restar t Syntax: restart Mode: Administrator Description: Performs a firmware reset fo r the hub usin g the bootup option selected with the bootup-option command. (S ee the sec tion “Bootup Option Commands” earlier in this chapter for a descripti ...

  • Cisco Systems 1503 - page 25

    Using Your Hub Software 3-25 System Information Commands System Inf or mation Commands Use the commands in this section to display general information about the hub and the stack of hubs. show system inf or mation Syntax: show system information Mode: Guest Description: Displays system information as shown belo w: Hub> show system information Sy ...

  • Cisco Systems 1503 - page 26

    Command Summary Cisco Micro Hub User Guide 3-26 system name no system name system contact Syntax: system name < string > Mode: Administrator Description: Configures the hub with a descriptive name. Command Keywor d Definition string —String containing 1 to 255 alphanumeric characte rs, which can be any combination of uppercase and lo wercas ...

  • Cisco Systems 1503 - page 27

    Using Your Hub Software 3-27 System Information Commands no system contact system location no system locatio n Syntax: no system contact Mode: Administrator Description: Resets the hub’ s system c ontact to the default system contact (“system administrator”). Syntax: system location < string > Mode: Administrator Description: Configures ...

  • Cisco Systems 1503 - page 28

    Command Summary Cisco Micro Hub User Guide 3-28 show mana gement information Syntax: show management information Mode: Guest Description: Displays information about the ne twork management hub as follo ws: Hub> show management information Hub id: 1 H/W version : 1. F/W version: 1.01 Bootup option : normal Physical address: 00-00-12-34-56-78 Comm ...

  • Cisco Systems 1503 - page 29

    Using Your Hub Software 3-29 Management Confi guration Command s Management Configuration Commands Use the commands in this section to configur e community strings and trap managers, which are required when using SNMP. IP P arameter Commands Use the commands in this section to configure the Micro Hub 1503 with IP parameters. The hub must be configu ...

  • Cisco Systems 1503 - page 30

    Command Summary Cisco Micro Hub User Guide 3-30 ip address no ip address Syntax: ip address { ip-addr ess } [ subnet mask ] [ gateway ip ] Mode: Administrator Description: Configures the IP parameters for the hub . Command Keywor d Definition s • ip-addr ess —IP address of the hub . The default v alue is 0.0.0.0. • subnet-mask —IP subnet ma ...

  • Cisco Systems 1503 - page 31

    Using Your Hub Software 3-31 Management Confi guration Command s SNMP Communities Commands Use the commands in this s ection to configur e the SNMP community st rings. These strings are used by the network mana gement software to access the Micro Hub 1503. show snmp communities Syntax: show snmp communities Mode: Administrator Description: Displays ...

  • Cisco Systems 1503 - page 32

    Command Summary Cisco Micro Hub User Guide 3-32 snmp community snmp communi ty disable Syntax: snmp community { index } { string } [ ro | rw ] Mode: Administrator Description: Creates or modifies community strings or associat ed access rights. All ne w entries are enab led by default. T o disable an ent ry , use the snmp community disable command. ...

  • Cisco Systems 1503 - page 33

    Using Your Hub Software 3-33 Management Confi guration Command s snmp community enab le snmp trap-authentication no snmp trap-authent ication Syntax: snmp community enable { index } Mode: Administrator Description: Enables a community st ring. Command Keywor d Definition index —Inde x of an entry in the community table. An integer between 1 and 5 ...

  • Cisco Systems 1503 - page 34

    Command Summary Cisco Micro Hub User Guide 3-34 Configuring T rap Man agers Use the commands in this section to configur e the Micro Hub 1503 trap info rmation. Trap information enables the hub to send information to conn ected network de vices. These messages notify network devices about e vents on the network. show ip tr ap-managers Syntax: show ...

  • Cisco Systems 1503 - page 35

    Using Your Hub Software 3-35 Management Confi guration Command s ip trap-manager ip trap-manager enab le ip trap-manager disab le Syntax: ip trap-manager { index } { ip -address } [ co mmunity name ] Mode: Administrator Description: Configures trap manager information. Command Keywor d Definition s • index — Index of an entry in the trap manage ...

  • Cisco Systems 1503 - page 36

    Command Summary Cisco Micro Hub User Guide 3-36 Hub Configuration Command Use the commands in this section to display inform ation about hubs in a stack. show hub inf ormation Syntax: show hub inf ormation [ hub id ] Mode: Guest Description: Displays information about one or more hubs in a stack . Command Keywor d Definition • hub id —(Optional ...

  • Cisco Systems 1503 - page 37

    Using Your Hub Software 3-37 Port Configuration Commands P or t Configuration Commands Use the commands in this sectio n to display or edit infor mation about any port in the stack. show port information Syntax: show port information [ hub id ] Mode: Guest Description: Displays information about all the network p orts on the selected hub . Command ...

  • Cisco Systems 1503 - page 38

    Command Summary Cisco Micro Hub User Guide 3-38 por t operation Syntax: port-operation { hub id } { port id } { enable | disable } Mode: Administrator Description: Enables or disables any port on any hub in the stack. Command Keywor d Definition s • hub id —Number used to identify the hub in a stack. An integer between 1 and 5. Read the section ...

  • Cisco Systems 1503 - page 39

    Using Your Hub Software 3-39 Statistics Commands Statistics Commands Use the commands in this section to display statistics for a stack, a specific hub in a stack, or a specif ic port in a stack since a rest art or since the counter was last cleared. show system statistics Syntax: show system statistics Mode: Guest Description: Displays statistics ...

  • Cisco Systems 1503 - page 40

    Command Summary Cisco Micro Hub User Guide 3-40 show hub statistics Syntax: show hub statistics [ hub id ] Mode: Guest Description: Displays statistics for the specif ied hub since the last time the clear -counter or restart command w as entered. Command Keywor d Definition • hub id —(Optional) Number used to identify the hub in a stack. An int ...

  • Cisco Systems 1503 - page 41

    Using Your Hub Software 3-41 Statistics Commands show port statistics Syntax: show port statistics { hub id } { port id } Mode: Guest Description: Displays statistics for the sp ecified port on the specified hub sinc e the last time the clear -counter s or re start command was entered. Command Keywor d Definition s • hub id —(Optional) Number u ...

  • Cisco Systems 1503 - page 42

    Command Summary Cisco Micro Hub User Guide 3-42 • Frames too long—Number of times that the frame length has exceeded the maximum allow able size (1518 bytes). • Short ev ents—Number of short packet fragments. • Runts—Number of fragments that were too long to qualify as short ev ents. • Collisions—Number of times network de vi ces at ...

  • Cisco Systems 1503 - page 43

    Using Your Hub Software 3-43 Statistics Commands clear counters Syntax: clear counters { stack | hub [ hub id ]| port [ hub id ] [ port id ]} Mode: Administrator Description: Clears all accrued statistics for the specified stack, hub, or port, or a combination of t hese. Command Keywor d Definition s • stack —Clears statistics for all por ts on ...

  • Cisco Systems 1503 - page 44

    Command Summary Cisco Micro Hub User Guide 3-44 Chassis Inf or mation Commands Use the commands in this section to display chassis information fo r the Cisco Micro Hub. show chassis inf or mation Syntax: show chassis information Mode: Guest Description: Displays general information about the hub’ s hardware and software. Information is shown in t ...

  • Cisco Systems 1503 - page 45

    Using Your Hub Software 3-45 Chassis Information Commands show card table Syntax: show card table Mode: Guest Description: Displays information about the ha rdware and firmw are in the hub. Information is shown in the follo wing format: Hub> show card table Card index: 2 Function type of this card: cpu-1503(38) Card serial number: 0 Hardware ver ...

  • Cisco Systems 1503 - page 46

    Command Summary Cisco Micro Hub User Guide 3-46 show stac k information stack name Syntax: show stack inf ormation Mode: Guest Description: Displays a description of hubs in a stack. Information is disp layed as follows: Hub> show stack information Stack name: Marketing Index IP address --------------------------- 1 123.34.18.5 2 123.34.18.17 3 ...

  • Cisco Systems 1503 - page 47

    Using Your Hub Software 3-47 Chassis Information Commands stack ip address clear stack tab le Syntax: stack ip address { ip addr ess } Mode: Administrator Description: Configures a Micro Hub 1503 that is a pa rt of a stack with an IP address. Command Keywor d Definition ip addr ess —IP address of the stack. Must be in the fo rmat xxx.xxx.xxx.xxx. ...

  • Cisco Systems 1503 - page 48

    Command Summary Cisco Micro Hub User Guide 3-48 ...

Fabricant Cisco Systems Catégorie Switch

Les documents que nous recevons du fabricant de l'appareilCisco Systems 1503 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Cisco Systems
- manuels d’utilisations 1503
- fiches produit Cisco Systems
- dépliants
- ou étiquettes-énergie Cisco Systems 1503
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Cisco Systems 1503.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Cisco Systems 1503, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Cisco Systems 1503. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Cisco Systems 1503.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Cisco Systems 1503, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Cisco Systems 1503 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Cisco Systems 1503.

Le manuel d’utilisation complet Cisco Systems, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Cisco Systems 1503 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Cisco Systems 1503, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lCisco Systems 1503 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Cisco Systems 1503 - qui devraient nous aider dans les premières étapes lors de l'utilisation Cisco Systems 1503
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Cisco Systems 1503
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Cisco Systems 1503 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Cisco Systems 1503?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Cisco Systems 1503, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Cisco Systems 1503 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)