-
Hitachi CP-X960W - page 1
1 Liquid Cr ystal Pr ojector Model CP-X960W/E USER’S GUIDE Thank you for purchasing the Hitachi liquid crystal projector . Please read this user ’ s manual thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference. Outline This liquid crystal projector is used to ...
-
Hitachi CP-X960W - page 2
...
-
Hitachi CP-X960W - page 3
3 <Before Using> About the Symbols V arious symbols are used in this instruction manual and on the product itself to ensure correct usage, to prevent danger to the user and others, and to prevent property damage. The meanings of these symbols are described below . It is important that you read these descriptions thoroughly and fully understan ...
-
Hitachi CP-X960W - page 4
4 ■ If a prob lem should occur . • If smoke or a strange odor arise, continued use could result in fire or electrical shock. In such case, immediately turn of f the power switch and then disconnect the power plug from the power outlet. After making sure that the smoke or odor has stopped, contact your dealer for repairs. Never attempt to make r ...
-
Hitachi CP-X960W - page 5
■ Handle the power cor d with care . • Do not damage, cut, process or strongl y twist the power cord. Placing heavy objects on the power cord, heating or strongly pulling the power cord can result in damage as well as fire or electrical shock. • Pulling on the power cord • Placing heavy objects on the power cord • Damaging the cord • Pl ...
-
Hitachi CP-X960W - page 6
6 ■ Do not sit or place heavy objects on this projector . • Do not sit on this projector . This could result in overturning, leading to damage or personal injury . Use special caution in households where children are present. • Do not place heavy objects on this projector . Placing heavy objects on this projector could result in loss of balan ...
-
Hitachi CP-X960W - page 7
7 ■ A v oid excessivel y hot locations. Do not place this projector in direct sunlight or near a hot object such as a stove, etc., because the heat could have adverse influence on the cabinet and other parts. ■ Sound v olume . Set the volume at a suitable level to avoid bothering other people. It is also better to keep the volume level low and ...
-
Hitachi CP-X960W - page 8
8 Chec king the pac kage Contents Make sure all of the following items are included in the package. If anything is missing, please contact your dealer . • Use the remote control in front of the remote control photoreceptor at a distance of about 5 m or less and an angle of 30 degrees to the left or right of the center . Main unit STANDBY / ON but ...
-
Hitachi CP-X960W - page 9
9 RGB IN 12 CONTROL RGB OUT S-VIDEO IN VIDEO IN AUDIO IN L MONO R USB AUDIO OUT AUDIO IN 12 Names and functions of eac h par t (continued) Main power switch Used to turn the power on and off. : OFF : ON VIDEO IN jack S-VIDEO IN jack Mini DIN 4-pin connector VIDEO IN jack RCA jack AUDIO L/R IN jack RCA jack AC IN jack Used to connect the accessory p ...
-
Hitachi CP-X960W - page 10
10 Names and functions of eac h par t (continued) Remote contr ol transmitter FOCUS button Used to adjust the focus of the image on the screen. (Refer to page 13.) ZOOM button Used to adjust the size of the image. (Refer to page 13.) FREEZE button Used to turn the freeze (still) image display on and off. AUTO button Used to execute auto-adjust. *3 ...
-
Hitachi CP-X960W - page 11
11 Names and functions of eac h par t (continued) Loading the batteries Loading AA batteries into the remote control. The laser pointer of the remote control is used in place of a finger or r od. Never look directl y into the laser beam outlet or point the laser beam at other people. The laser beam can cause vision prob lems. W arning AVOID EXPOSUR ...
-
Hitachi CP-X960W - page 12
12 Installation T ypical LCD Pr ojector and Screen Installation Using the adjuster s a. Distance from the LCD projector to the screen b. Distance from the lens center to the bottom of the screen (a,b : +/-10%). The projection distances shown in the diagram to the left are for full size (800 x 600 dots). The LCD projector should normally be used lev ...
-
Hitachi CP-X960W - page 13
13 Basic operations T o pr oject 2 4 5 7 VIDEO STANDBY/ON RGB POSITION LASER MENU RESET MAGNIFY FREEZE OFF VOLUME P in P MUTE AUTO BLANK TIMER FOCUS ZOOM 2 3 5 4 7 1 1 T urn on the main po wer s witch of the pr ojector [ I: ON]. • The Power indicator lights orange. 2 Press the ST ANDBY / ON b utton. • The Power indicator will blink green and th ...
-
Hitachi CP-X960W - page 14
14 VIDEO STANDBY/ON RGB POSITION LASER MENU RESET MAGNIFY FREEZE OFF VOLUME P in P MUTE AUTO BLANK TIMER T urning off the po wer Plug & Pla y Basic operations (contin ued) 1 Press the ST ANDBY/ON b utton for appr o ximately 1 sec. • The Power indicator will blink orange, then the lamp will turn of f. Approximately 1 sec. after that, the lamp ...
-
Hitachi CP-X960W - page 15
15 VIDEO STANDBY/ON RGB POSITION LASER MENU RESET MAGNIFY FREEZE OFF VOLUME P in P MUTE AUTO BLANK TIMER Freeze function Basic operations (contin ued) 1 Press the FREEZE b utton. • The image being displayed will freeze. • The [ ] mark appears in the lower right corner of the screen when the Freeze function is on. 1 Press the FREEZE b utton. • ...
-
Hitachi CP-X960W - page 16
16 1 Press the MA GNIFY + b utton. • The center part of the image will be displayed magnified approximately two times. 2 Press the MA GNIFY + button. • When this button is pressed, the image will be displayed even larger . 3 Press the MA GNIFY – button. • When this button is pressed, the image will be displayed even smaller . 4 Press the PO ...
-
Hitachi CP-X960W - page 17
VIDEO STANDBY/ON RGB POSITION LASER MENU RESET MAGNIFY FREEZE OFF VOLUME P in P MUTE AUTO BLANK TIMER FOCUS ZOOM MENU 17 Returning to the initial settings Adjustments and functions 1 Press the MENU ( ) b uttons of the pr ojector or the MENU b utton of the remote control. • The Menu screen will appear . (refer to page 18 - 21 for details.) 2 Press ...
-
Hitachi CP-X960W - page 18
18 Adjustments and functions (contin ued) RGB signal input Video signal input VOLUME BRIGHT CONTRAST V POSIT H POSIT H PHASE H SIZE COLOR BAL R COLOR BAL B 100 100 800 SETUP INPUT OPT. IMAGE VOLUME BRIGHT CONTRAST SHARPNESS COLOR TINT COLOR BAL R COLOR BAL B SETUP INPUT OPT. IMAGE • The menu cannot be displayed while the initial screen (“No inp ...
-
Hitachi CP-X960W - page 19
19 Adjustments and functions (contin ued) INPUT The INPUT menu is used to select RGB signal sync signal frequency of the monitor and the VIDEO signal. RGB VIDEO fH:38kHz fV:60Hz SETUP INPUT OPT. IMAGE RGB VIDEO AUTO NTSC PAL SECAM NTSC4.43 M-PAL N-PAL SETUP INPUT OPT. IMAGE Adjustment item RGB VIDEO Adjustment description Displays the following RGB ...
-
Hitachi CP-X960W - page 20
20 Adjustments and functions (contin ued) Adjustment item KEYSTONE MIRROR BLANK START UP P in P Adjustment description Reduces keystone Reduces keystone distortion at the bottom distortion at the top Sets vertical or horizontal inversion of the projected image. H: horizontal inversion only V: vertical inversion only H&V: both horizontal and ver ...
-
Hitachi CP-X960W - page 21
21 Adjustments and functions (contin ued) OPT Communication functions, etc., can be set from the OPT menu. Adjustment item COM. SPEED COM. BITS TIMER LANGUAGE AUTO OFF SYNC ON G Adjustment description Sets the communication speed (5 steps). Sets the bit configuration for the communication data. 7N1...7 data bits, No parity, 1 stop bit. 8N1...8 data ...
-
Hitachi CP-X960W - page 22
22 Connection to the video signal terminals Connection to the RGB signal terminal 1. Input signals 2. Signal input jacks 1. Input signals 2. Signal input jacks S-VIDEO input (mini DIN 4-pin) Color signal Ground Ground Brightness signal The priority sequence of the video input jacks is as follows. (1) S-VIDEO input jack (2) RCA jack input jack When ...
-
Hitachi CP-X960W - page 23
23 Connection to the RGB signal terminal (contin ued) • Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector . • Be sure to check jack type, signal level, timing and resolution before connecting this projector to a computer . • Depending on the input signal, full-size displ ...
-
Hitachi CP-X960W - page 24
24 Connection to the RGB signal terminal (contin ued) 4. Initial set signals The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, refer to pages 17 and 18 and adjust the V .POSIT and H.POSIT of the menu. DATA HSYNC a c bd DATA VSYNC a bd c Computer/Signal Horizontal signa ...
-
Hitachi CP-X960W - page 25
25 Connecting the USB 1. Connect the projector and computer with a suitable commercially available cable. 2. Press the INPUT button of the projector or the RGB 1/2 button of the remote control and select the input where the computer is to be connected. 3. Start the mouse function. 4. Refer to page 10, 26 concerning the remote control of mouse opera ...
-
Hitachi CP-X960W - page 26
26 Connection to the contr ol signal terminal Use the mouse cable provided or a PS/2 mouse cable (for IBM and compatibles). Cables for ADB mouse (Apple), bus mouse (NEC) and serial mouse are available as options. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CLK DATA RTS SEL0 GND 1 2 3 4 5 6 DATA +5V GND CLK 6 3 4 2 1 +5V 5 control jack D-sub 15-pin shrink j ...
-
Hitachi CP-X960W - page 27
27 Connection to the contr ol signal terminal (continued) CONTROL signal jac k ADB (Mac) mouse 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 DATA RTS GND 1 2 3 4 ADB +5V GND 3 4 2 1 +5V (POWER ON) Projector Computer Mouse jack Mini DIN 4-pin Mouse cable (ADB) (option) Serial mouse 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 GND TD 1 2 3 4 5 6 7 8 9 CD RD TD DTR GND ...
-
Hitachi CP-X960W - page 28
28 Connection to the contr ol signal terminal (continued) 2. RS232C communication (1) T urn off the projector and computer power supplies and connect with the RS232C cable. (2) T urn on the computer power supply and, after the computer has started up, turn on the projector power supply . (3) Refer to page 20, 21 and set the communication speed and ...
-
Hitachi CP-X960W - page 29
29 Connection to the contr ol signal terminal (continued) The command code configuration consists of a 2-byte command and the following data. • The first byte of a command indicates the command type with 3 bits on the MSB side and the data length with 4 bits on the LSB side. Projector - computer Computer - projector ‘0xH’ : Error code ‘2xH? ...
-
Hitachi CP-X960W - page 30
30 Connection to the contr ol signal terminal (continued) Requesting projector status (1) Send the request code ‘20H’ + ‘ yyH’ from the computer to the projector . (2) The projector returns the response code ‘1xH’ + ‘yyH’ +data to the computer . Changing the projector settings (1) Send the setting code ‘3xH’ + ‘yyH’ +data fr ...
-
Hitachi CP-X960W - page 31
31 RGB IN 12 CONTROL RGB OUT S-VIDEO IN VIDEO IN AUDIO IN L MONO R USB AUDIO OUT AUDIO IN 12 Example of system setup Cleaning the Air filter T urn power off to all devices before connecting. Refer to the instruction manual of each device before connecting. Caution AC input Video tape recorder with S jack Video tape recorder Speaker (with built-in a ...
-
Hitachi CP-X960W - page 32
32 Cleaning the Air filter (contin ued) 3 Cleaning the air filter with a v acuum cleaner 4 Installing the air filter When the air filter becomes clogged with dust, etc., the projector power may turn off to prevent the internal heat level rising. Do not operate the projector with the air filter removed. Caution Lamp Messa g e tab le The indicator la ...
-
Hitachi CP-X960W - page 33
33 Messa ge table (contin ued) Indicators The POWER indicator , LAMP indicator and TEMP indicator light or blink in the following cases. POWER indicator Lights orange Flashes green Lights green Flashes orange Lights red Lights red Lights red Flashes red LAMP indicator Turns off Turns off Turns off Turns off Lights red Flashes red Turns off Flashes ...
-
Hitachi CP-X960W - page 34
34 Specifications Dimensional Diagram · These specifications are subject to change without notice. Unit: inches Product name Liquid crystal projector Model CP-X960W/E Display method Three liquid crystal panels, three primary color system. Liquid crystal Panel size 3.3 cm (1.3 type) panel Drive system TFT active matrix Number of pixels 786,432 pixe ...
-
Hitachi CP-X960W - page 35
35 About the warranty and after -ser vice About the warranty A warranty is provided for this product. Fill in the necessary items and store in a safe place. About after -ser vice When a problem occurs, please check first using the T roubleshooting Chart provided in this instruction manual. If the problem still persists, contact your dealer or servi ...
-
Hitachi CP-X960W - page 36
QR41981 Printed in Japan KY-K (S) ...
Avez-vous une question à propos de Hitachi CP-X960W?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Hitachi CP-X960W, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Hitachi CP-X960W il est probable qu’il a envie de partager la façon de le résoudre.