-
Mitsubishi Electronics HC910 - page 1
HC910 DLP™ PROJECTOR MODEL HC910 User Manual ENGLISH This User Manual is important to you. Please r ead it befor e using your pr ojector . ...
-
Mitsubishi Electronics HC910 - page 2
EN-2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE P ARTS INSIDE REFER SERVICING TO QUALIFIED SER VICE PERSONNEL. The lightning fl ash with arr owhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “d ...
-
Mitsubishi Electronics HC910 - page 3
EN-3 ENGLISH Contents Declaration of Conformity Model number : HC910 T rade name : MITSUBISHI ELECTRIC Responsible party : Mitsubishi Digital Electronics America, Inc. 9351 Jeronimo Road, Irvine, CA 92618 U.S.A T elephone number : +1-(949) 465-6000 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditi ...
-
Mitsubishi Electronics HC910 - page 4
EN-4 Important safeguar ds Please read all these instructions r egar ding your projector and r etain them for futur e refer ence. Follow all warnings and instructions marked on the projector . 1. Read instructions All the safety and operating instructions should be read befor e the appliance is operated. 2. Retain instructions The safety and operat ...
-
Mitsubishi Electronics HC910 - page 5
EN-5 ENGLISH WARNING: Unplug immediately if there is something wrong with your pr ojector . Do not operate if smoke, strange noise or odor comes out of your projector . It might cause fi re or electric shock. In this case, unplug immediately and contact your dealer . Never remove the cabinet. This projector contains high voltage cir cuitry . An in ...
-
Mitsubishi Electronics HC910 - page 6
EN-6 Pr eparing your pr ojector Cables Power supply parts Remote control parts Power cord (two) (246C483-10, 246C383-20) Remote control (290P133-10) R03 (Size-AAA) battery (two) RS-232C cable (246C508-10) RGB cable for PC (246C521-10) Others • Lens cap (Attached to the projector) • User manual (English only) (871D420-70) • CD-ROM (with User m ...
-
Mitsubishi Electronics HC910 - page 7
EN-7 ENGLISH Overview 3 2 1 57 10 9 8 6 4 2 1 3 4 8 5 6 7 9 1 FOCUS ring 2 ZOOM ring 3 Control panel 4 Air outlet grille 5 Remote contr ol sensor (Front) 6 Air inlet grille 7 Air outlet grille 8 T erminal board 9 Kensington Security Lock Standar d connector 10 Air inlet grille Control ar ea 1 POWER button 2 AUTO POSITION / button 3 COMPUTER / ? ...
-
Mitsubishi Electronics HC910 - page 8
EN-8 ON DVI PC COMP CONTRAST ASPECT CNT M1 AV MEMOR Y BRIGHTNESS BRT M2 COLOR TEMP C. T . GAMMA SHARPNESS SHARP IRIS AUTO POSITION A.P . M3 VIDEO S-VIDEO POWER OFF COMPUTER DVI-D (HDCP) COMPONENT ENTER MENU 1 2 3 4 5 6 7 8 9 18 19 17 16 15 14 13 12 11 10 1 2 3 Pr eparating your pr ojector (Continue) Bottom side 1 Adjustment foot (Front) 2 Lamp cove ...
-
Mitsubishi Electronics HC910 - page 9
EN-9 ENGLISH Using the r emote contr ol 30˚ 30˚ 30˚ 30˚ 20° 10° 20° 10° 20 ˚ 20 ˚ Operational range of the r emote contr ol • Keep the remote control photo-sensor out of dir ect sunlight or fl uor escent lamp light. • Keep the remote control photo-sensor at least 2 m away fr om fl uorescent lamps. Otherwise, the r e- mote control ma ...
-
Mitsubishi Electronics HC910 - page 10
EN-10 Setting up your pr ojector W A A=B B Setting up the screen Install the screen perpendicularly to the pr ojector . If the screen can not be installed in such a way , adjust the projection angle of the pr ojector . (See below .) • Install the screen and projector so that the pr ojector’ s lens is placed at the same height and horizontal pos ...
-
Mitsubishi Electronics HC910 - page 11
EN-11 ENGLISH Scr een size and pr ojection distance Refer to the following table to determine the screen size. B A Hd 40 102 20 50 35 89 55 1.4 67 1.7 6.4 16.2 60 152 29 75 52 133 84 2.1 102 2.6 9.6 24.3 80 203 39 100 70 177 113 2.9 137 3.5 12.7 32.4 100 254 49 125 87 221 142 3.6 171 4.4 15.9 40.5 150 381 74 187 131 332 213 5.4 258 6.6 23.9 60.7 20 ...
-
Mitsubishi Electronics HC910 - page 12
EN-12 Viewing video images A. Connecting the pr ojector to video equipment Preparation: • Make sure that the power of the projector and that of the video equipment ar e turned off. Basic home theater system connection VIDEO IN COMPONENT VIDEO IN C B /P B Y C R /P R S-VIDEO IN Video player DVD player Set-top box or digital tuner ...
-
Mitsubishi Electronics HC910 - page 13
EN-13 ENGLISH COMPONENT VIDEO IN P B /C B Y P R /C R P B /C B Y P R /C R S-VIDEO IN VIDEO IN 1 2 S-VIDEO IN COMPONENT VIDEO IN VIDEO IN COMPONENT VIDEO IN 1 2 VIDEO IN S-VIDEO IN Connecting to a video player , etc. 1. Connect one end of the optional video cable to the VIDEO IN terminal of the projector . 2. Connect the other end of the video cable ...
-
Mitsubishi Electronics HC910 - page 14
EN-14 Viewing video images (continued) Connecting to video equipment having a DVI-D terminal Y ou can project high-quality images by connecting the DVI-D terminal of this projector to video equipment having a DVI-D output terminal. In addition, this projector supports HDCP and is able to r eceive encrypted digital video data that are output fr om D ...
-
Mitsubishi Electronics HC910 - page 15
EN-15 ENGLISH C. Pr ojecting images Preparation: • Remove the lens cap. • T ur n on the power of the connected video equipment. 1. Confi rm the POWER indicator lights up r ed. • If the projector was turned off before the lamp was cooled down suf fi ciently last time, the fan may start r otating and the POWER button may not work after the po ...
-
Mitsubishi Electronics HC910 - page 16
EN-16 Viewing video images (continued) T o stop pr ojecting: 8. Press the POWER button on the projector or the OFF ( ) button on the remote contr ol. • A confi rmation message is displayed. • T o cancel the procedur e, leave the projector for a while or press the MENU button. 9. Press the POWER button on the projector or the OFF ( ) button on ...
-
Mitsubishi Electronics HC910 - page 17
EN-17 ENGLISH Setting the aspect ratio Y ou can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the setting according to the type of the input video signal. How to change the settings: With the remote contr ol: 1. Press the ASPECT button. • Every time the ASPECT button is pressed, the aspec ...
-
Mitsubishi Electronics HC910 - page 18
EN-18 COMPONENT VIDEO IN 2 1 VIDEO IN S-VIDEO IN COMPONENT VIDEO IN 2 1 S-VIDEO IN VIDEO IN Viewing computer images A. Connecting the projector to a computer Preparation: • Make sure that the power of the projector and that of the computer ar e tur ned off. • When connecting the projector to a desktop computer , disconnect the RGB cables that a ...
-
Mitsubishi Electronics HC910 - page 19
EN-19 ENGLISH C. Projecting images Preparation: • Remove the lens cap. • T ur n on the power of the connected computer . 1. Confi rm the POWER indicator lights up r ed. • If the projector was turned off before the lamp was cooled down suf fi ciently last time, the fan may start rotating and the POWER button may not work after the power cord ...
-
Mitsubishi Electronics HC910 - page 20
EN-20 AUTO POSITION button When the image supplied from the computer is displaced, carry out the following pr ocedure. 1. Display a bright image (such as a full-screen display of the Recycle Bin window). 2. When the screen saver has been enabled, disable it. 3. Press the AUTO POSITION button. The projector automatically makes optimum positional set ...
-
Mitsubishi Electronics HC910 - page 21
EN-21 ENGLISH Menu operation • Menus are not displayed when no signal is supplied to the projector . * 1: Not available with certain signals. * 2: Available only when the input signal is TV50, TV60, 480i, or 576i. * 3: Available only when the sour ce is VIDEO or S-VIDEO. * 4: Setting range differs depending on the input signals. * 5: Not availabl ...
-
Mitsubishi Electronics HC910 - page 22
EN-22 CONTRAST IMAGE 0 BRIGHTNESS 0 6500K 0 COLOR AUTO 0 SVGA60 AUTO TINT 0 SHARPNESS COLOR TEMP . GAMMA MODE WHITE ENHANCE opt. AV MEMOR Y 1 IMAGE REVERSE OFF AUTO POWER ON OFF AUTO POWER OFF KEYSTONE ON INST ALLATION ON BACK COLOR OFF BLUE SVGA60 SPLASH SCREEN 0 opt. ST ANDARD LAMP MODE AV MEMOR Y 1 FEA TURE AUTO SVGA60 AUTO AUTO opt. MENU POSITI ...
-
Mitsubishi Electronics HC910 - page 23
EN-23 ENGLISH 3. FEA TURE menu ITEM SETTING FUNCTION MENU POSITION 2 options Use to change the position of the menu. CINEMA MODE AUTO The fi lm mode will be automatically activated when a fi lm source signal is input. OFF The fi lm mode will not be activated. VIDEO SIGNAL 8 options When AUTO is selected, the appropriate video format is automatic ...
-
Mitsubishi Electronics HC910 - page 24
EN-24 Adjusting pr ojected images T o adjust the brightness (CONTRAST and BRIGHTNESS): Y ou can make adjustments for the brightness of the projected image using the menu. (See Page 21 for menu setting.) 1. Display the IMAGE menu. 2. Select CONTRAST or BRIGHTNESS by pressing the or button. 3. Adjust the selected item by pr essing the or ...
-
Mitsubishi Electronics HC910 - page 25
EN-25 ENGLISH T o adjust the tone of white (COLOR TEMP .): Y ou can select a preset color temperature (white tone) using the menu. (See Page 21 for menu setting.) 1. Display the IMAGE menu. 2. Select COLOR TEMP . by pressing the or button. 3. Select your desired color temperature by pr essing the or button. T o cancel the menu: 4. P ...
-
Mitsubishi Electronics HC910 - page 26
EN-26 This projector automatically and pr operly projects video signals supplied from the computer . However , some video signals may not be projected, depending on the type of the computer . In such a case, press the AUTO POSITION button. (See Page 20.) When the signal is still not projected pr operly , adjust the projected image using the SIGNAL ...
-
Mitsubishi Electronics HC910 - page 27
EN-27 ENGLISH MENU ACCESS SVGA60 opt. LOCK UNLOCK OK OK A V MEMORY 1 P ASSWORD CONFIRM O K CANCEL MENU ACCESS SVGA60 opt. LOCK UNLOCK OK OK A V MEMORY 1 P ASSWORD O K CANCEL Password function This projector is equipped with the passwor d function that is designed for prevention of wr ong operation by children and r estriction on operation by other ...
-
Mitsubishi Electronics HC910 - page 28
EN-28 61 245 310 100 5 COMPONENT VIDEO IN S-VIDEO IN VIDEO IN Asking for installation T o view images projected by the ceiling-mounted projector fr om the front: When the projector is installed on the ceiling, the special ceiling mount bracket, which is separately sold, is requir ed. Be sure to ask a certifi ed installation specialist for installa ...
-
Mitsubishi Electronics HC910 - page 29
EN-29 ENGLISH Using fi lter Filter cover (a) (a) Holder Holder Filter cover Filter Filter cover (a) This projector has a fi lter cover (fi lter) for keeping dust out. When using the projector in a dusty place, attach this fi lter cover . Installation Before installing this fi lter to the projector , be sure to unplug the projector fr om the ou ...
-
Mitsubishi Electronics HC910 - page 30
EN-30 Replacing the lamp This projector is equipped with a lamp to pr oject images. This lamp is a consumable. It may bur n out or its brightness may decrease during use. In such cases, r eplace the lamp with a new one as soon as possible. Be sure to replace the lamp with a new lamp separately sold that is exclusive to this projector . Contact your ...
-
Mitsubishi Electronics HC910 - page 31
EN-31 ENGLISH (c) (a ) (b) (c) T o replace the lamp: 1. Reverse the projector gently . 2. Loosen the screw (a) using a Phillips screwdriver (+), and remove the lamp cover (b). 3. Loosen the screws (c) using a Phillips screwdriver (+). 4. Pull up the handle. 5. Pull out the lamp box by the handle while holding the projector . • Pull the lamp box o ...
-
Mitsubishi Electronics HC910 - page 32
EN-32 POWER Off Steady red Blinking red / green ST A TUS Off Off Blinking orange Blinking green Steady red Off Steady or Blinking Solution • Connect the power cord to the projector . • Plug the power cord into a wall outlet. • If any objects are blocking the air inlet or outlet grille, remove them and carry out the following. 1. Unplug the po ...
-
Mitsubishi Electronics HC910 - page 33
EN-33 ENGLISH Images are not displayed corr ectly . Problem Projected images ar e shaking. Projected images ar e displaced. Projected images ar e distorted. Projected images ar e dark. Projected images ar e blurred. White dots are seen on projected images. Black dots are seen on projected images. Rainbow effect is seen on projected images. Fine str ...
-
Mitsubishi Electronics HC910 - page 34
EN-34 Others Problem The exhaust vents emit warm air . The menu can't be used. “TEMPERA TURE!!” is displayed. The mark appears. The remote contr ol doesn't function easily or at all. The buttons on the control panel (except for the POWER button) don’t function. Abnormal sound is heard. Solution • This air comes out after cooling t ...
-
Mitsubishi Electronics HC910 - page 35
EN-35 ENGLISH Indicators POWER Steady green or Steady red Steady red Steady green Steady red Steady red Blinking green/red Blinking green/red ST A TUS Blinking orange Blinking green Blinking green/red Blinking red Steady red Off Steady or Blinking CONDITION Abnormal temperature • The ventilation grilles are clogged with dust or dirt. • The r oo ...
-
Mitsubishi Electronics HC910 - page 36
EN-36 Specifi cations The specifi cations and outside appearance of the pr ojector are subject to change without prior notice. T ype Model Display T echnology Projection lens Light-source lamp Image size (Projection distance) Maximum number of display colors Maximum resolution Computer signal Video signal Component signal Computer input Video inp ...
-
Mitsubishi Electronics HC910 - page 37
EN-37 ENGLISH TV60, 480i(525i) - 15.73 59.94 1024 x 576 - TV50, 576i(625i) - 15.63 50.00 1024 x 576 - 1080i 60 (1125i 60) - 33.75 60.00 1024 x 576 - *2 1080i 50 (1125i 50) - 28.13 50.00 1024 x 576 - 480p (525p) - 31.47 59.94 1024 x 576 - *2 576p (625p) - 31.25 50.00 1024 x 576 - *2 720p 60 (750p 60) - 45.00 60.00 1024 x 576 - *2 720p 50 (750p 50) - ...
-
Mitsubishi Electronics HC910 - page 38
MITSUBISHI Pr ojector Contact Information Manufactur ed by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-City , Kyoto Japan M I T SUBIS HI ELECTRIC CORPORA T I O N North America MESCA (Mitsubishi Electric Sales Canada Inc.) http://www .mitsubishielectric.ca Information T echnologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, Cana ...
Avez-vous une question à propos de Mitsubishi Electronics HC910?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Mitsubishi Electronics HC910, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Mitsubishi Electronics HC910 il est probable qu’il a envie de partager la façon de le résoudre.